Syntheses, optical properties and electronic structures of copper(I) tantalates: Cu5Ta11O30 and Cu3Ta7O19

Two copper tantalates, Cu₅Ta₁₁O₃₀ (1) and Cu₃Ta₇O₁₉ (2), were synthesized by solid-state and flux synthetic methods, respectively. A synthetic route yielding 2 in high purity was found using a CuCl flux at 800^oC and its structure was characterized using powder X-ray diffraction (XRD) data (P6₃/m (no. 176), Z=2, a=6.2278(1) Å, and c=20.1467(3) Å). The solid-state synthesis of 1 was performed using excess Cu₂O that helped to facilitate the growth of single crystals and their characterization by XRD (P6¯2c (no. 190), Z=2, a=6.2252(1) Å, and c=32.516(1) Å). The atomic structures of both copper tantalates consist of alternating single and double layers of TaO₇ pentagonal bipyramids that are bridged by a single layer of isolated TaO₆ octahedra and linearly-coordinated Cu⁺. Measured optical bandgap sizes of ∼2.59 and ∼2.47 eV for 1 and 2 were located well within visible-light energies and were consistent with their orange-yellow colours. Each also exhibits optical absorption coefficients at the band edge of ∼700 and ∼275 cm⁻¹, respectively, and which were significantly smaller than that for NaTaO₃ of ∼1450 cm⁻¹. Results of LMTO calculations indicate that their visible-light absorption is attributable mainly to indirect bandgap transitions between Cu 3d¹⁰ and Ta 5d⁰ orbitals within the TaO₇ pentagonal bipyramids.     

Structure, energy band, and optical properties of NaLa(PO3)4 crystal

An alkali metal-rare earth phosphate crystal of NaLa(PO₃)₄ has been synthesized by high temperature solid-state reactions and structurally characterized by single crystal X-ray diffraction analysis, for the first time. It crystallizes in the monoclinic P2₁/n space group with lattice parameters: a=7.2655(3), b=13.1952(5), , β=90.382°(1), , Z=4. It is composed of LaO₈ polyhedra and [(PO₃)₄]⁴⁻ chains sharing oxygen atoms to form a three-dimensional framework, delimiting intersecting tunnels in which the sodium ions are located. The IR spectrum, absorption spectrum, and emission spectrum of the compound have been investigated. The absorption edge is located at 340 nm (3.60 eV). The calculated total and partial densities of states indicate that the top of valence bands is mainly built upon O-2p states which interact with P-3p states via σ (P-O) interactions, and the low conduction bands mostly originates from unoccupied La-5d states. The P-O bond is mostly covalent in character, and the ionic character of the Na-O bond is larger than that in the La-O bond.     

Full potential study of the elastic, electronic, and optical properties of spinels MgIn2S4 and CdIn2S4 under pressure effect

The structural, elastic, electronic, and optical properties of cubic spinel MgIn₂S₄ and CdIn₂S₄ compounds have been calculated using a full relativistic version of the full-potential linearized-augmented plane wave with the mixed basis FP/APW+lo method. The exchange and correlation potential is treated by the generalized-gradient approximation (GGA). Moreover, the Engel-Vosko GGA formalism is also applied to optimize the corresponding potential for band structure calculations. The ground state properties, including the lattice constants, the internal parameter, the bulk modulus, and the pressure derivative of the bulk modulus are in reasonable agreement with the available data. Using the total energy-strain technique, we have determined the full set of first-order elastic constants C_ij and their pressure dependence, which have not been calculated or measured yet. The shear modulus, Young’s modulus, and Poisson’s ratio are calculated for polycrystalline XIn₂S₄ aggregates. The Debye temperature is estimated from the average sound velocity. Electronic band structures show a direct band gap (Г-Г) for MgIn₂S₄ and an indirect band gap (K-Г) for CdIn₂S₄. The calculated band gaps with EVGGA show a significant improvement over the GGA. The optical constants, including the dielectric function ε(ω), the refractive index n(ω), the reflectivity R(ω), and the energy loss function L(ω) were calculated for radiation up to 30 eV.     

Theoretical studies of third-order nonlinear optical response for B12N12, B24N24 and B36N36 clusters

In this paper, we have calculated the third-order nonlinear optical polarizabilities corresponding to three optical processes: third-harmonic generation (THG), electric-field-induced second-harmonic generation (EFISHG) and degenerate four-wave mixing (DFWM) for B₁₂N₁₂, B₂₄N₂₄ and B₃₆N₃₆ clusters. The calculations have been performed by employing ab initio time-dependent density functional theory combined with sum-over-states method (SOS//TDDFT). We obtained the similar dynamic behavior of third-order NLO polarizabilities for three BN clusters. At input photon energy below 1.25 eV, the resonance enhancements of response haven't occurred. This is due to the fact that the calculated BN clusters have the large transition energy. B₂₄N₂₄ cluster has the larger transition dipole moments and the third-order polarizabilities of B₂₄N₂₄ are much larger than those of B₁₂N₁₂ and B₃₆N₃₆. We also estimate the static third-order optical susceptibility χ⁽³⁾ for BN fullerene materials from the average static third-order polarizability <γ>. The static χ⁽³⁾ of B₂₄N₂₄ fullerene materials are 1.36×10⁻¹⁴ esu for three NLO processes.     

Structural and physical properties of the new intermetallic compound Yb3Pd2Sn2

The crystal structure of the ternary intermetallic compound Yb₃Pd₂Sn₂ has been determined ab initio from powder X-ray diffraction data. The compound crystallizes as a new structure type in the orthorhombic space group Pbcm and lattice constants a=0.58262(3), b=1.68393(8), c=1.38735(7) nm. Yb₃Pd₂Sn₂ is composed of a complex _∞[Pd₂Sn₂]^δ− polyanionic network in which the Yb ions are embedded. A comparison between this structure and those of Eu₃Pd₂Sn₂ and Ca₃Pd₂Sn₂, other novel polar intermetallic compounds, was made. DC susceptibility and ¹⁷⁰Yb Mössbauer spectroscopic measurements indicate a close-to divalent Yb behavior. Moreover, a hybridization between 4f and conduction electrons is suggested by electronic structure calculations and heat capacity measurements.     

Synthesis, crystal structure and optical properties of an indium phosphate K3In3P4O16

An alkali-metal indium phosphate crystal, K₃In₃P₄O₁₆, has been synthesized by a high-temperature solution reaction and exhibits a new structure in the family of the alkali-metal indium phosphates system. Single-crystal X-ray diffraction analysis shows the structure to be monoclinic with space group P2₁/n, and the following cell parameters: a=9.7003(18), b=9.8065(18), c=15.855(3) Å, β=90.346(3)°, V=1508.2(5) Å³, Z=4, R=0.0254. It possesses three-dimensional anionic frameworks with tunnels occupied by K⁺ cations running along the a-axis. The emission and absorption spectra of the compound have been investigated. Additionally, the calculations of energy band structure, density of states, dielectric constants and refractive indexes have been performed with the density functional theory method. Also, the two-photon absorption spectrum is simulated by two-band model. The obtained results tend to support the experimental data.     

Synthesis, band structure, and optical properties of Ba2ZnV2O8

A novel compound Ba₂ZnV₂O₈ has been synthesized in high temperature solution reaction and its crystal structure has been characterized by means of single crystal X-ray diffraction analysis. It crystallizes in monoclinic system and belongs to space group P2₁/c with a=7.9050(16), b=16.149(3), , β=90.49(3). It builds up from 1-D branchy chains of [ZnV₂O₈⁴⁻]_∞, and the Ba²⁺ cations are located in the space among these chains. The IR spectrum, ultraviolet-visible diffuse reflection integral spectrum and fluorescent spectra of this compound have been investigated. The calculated results of energy band structure by the density functional theory method show that the solid-state compound of Ba₂ZnV₂O₈ is an insulator with direct band gap of 3.48 eV. The calculated total and partial density of states indicate that the top valence bands are contributions from the mixings of O-2p, V-3d, and Zn-3d states and low conduction bands mostly originate from unoccupied antibonding states between the V-3d and O-2p states. The V-O bonds are mostly covalence characters and Zn-O bonds are mostly ionic interactions, and the ionic interaction strength is stronger between the Ba-O than between the Zn-O. The refractive index of n_x, n_y, and n_z is estimated to be 1.7453, 1.7469, and 1.7126, respectively, at wavelength of 1060 nm for Ba₂ZnV₂O₈ crystal.     

Ab-initio study of the structural, linear and nonlinear optical properties of CdAl2Se4 defect-chalcopyrite

The complex density functional theory (DFT) calculations of structural, electronic, linear and nonlinear optical properties for the defect chalcopyrite CdAl₂Se₄ compound have been reported using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2k code. We employed the Wu and Cohen generalized gradient approximation (GGA-WC), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure, density of states and the spectral features of the linear and nonlinear optical properties. This compound has a wide direct energy band gap of about 2.927 eV with both the valence band maximum and conduction band minimum located at the center of the Brillouin zone. The ground state quantities such as lattice parameters (a, c, x, y and z), bulk modulus B and its pressure derivative B′ are evaluated. We have calculated the frequency-dependent complex ε(ω), its zero-frequency limit ε₁(0), refractive index n(ω), birefringence Δn(ω), the reflectivity R(ω) and electron energy loss function L(ω). Calculations are reported for the frequency-dependent complex second-order nonlinear optical susceptibilities. We find opposite signs of the contributions of the 2ω and 1ω inter/intra-band to the imaginary part for the dominant component through the wide optical frequency range.     

Structural, thermodynamic and optical properties of MgF2 studied from first-principles theory

A detailed theoretical study of structural, electronic, elastic, thermodynamic and optical properties of rutile type MgF₂ has been carried out by means of first-principles Density Functional Theory (DFT) calculations using plane wave pseudo-potentials within the local density approximation and generalized-gradient approximation for the exchange and correlation functionals. The calculated ground state properties and elastic constants agree quite well with experimental values. From the calculated elastic constants we conclude that MgF₂ is relatively hard when compared to other alkaline-earth fluorides and ductile in nature. The thermodynamic properties such as heat capacity, entropy, free energy, phonon density of states and Debye temperatures are calculated at various temperatures from the lattice dynamical data obtained through the quasi-harmonic Debye model. From free energy and entropy it is found that the system is thermodynamically stable up to 1200 K. The imaginary part of the calculated dielectric function ε₂(ω) could reproduce the six prominent peaks which are observed in experiment. From the calculated ε(ω), other optical properties such as refractive index, reflectivity and electron energy-loss spectrum are obtained up to the photon energy range of 30 eV.     

Synthesis,structural study,thermal, optical properties and characterization of the new compound [C_6H_7N_2O_2]_3TeCl_5·2Cl

The new organic-inorganic compound, [C_6H_7N_2O_2]_3TeCl_5·2Cl was synthesized and its structure was determined at room temperature in the triclinic system (P~-1) with the following parameters: a = 10.5330(11) ?, b = 10.6663(11) ?, c = 15.9751(16)?, α = 82.090(2)°, β = 71.193(2)°, γ = 68.284(2)°and Z = 2. The final cycle of refinement led to R = 0.057 and Rw = 0.149. The crystal structure was stabilized by an extensive network of N--H···Cl and non-classical C--H···Cl hydrogen bonds between the cation and the anionic group. Several thermal analysis techniques such as thermogravimetric analysis, differential scanning calorimetric analysis and evolved gas analysis were used. We used isoconversional kinetics methods to determine the kinetics parameters. We observe that the decomposition of [C_6H_7N_2O_2]_3TeCl_5·2Cl entails the formation hydrochloric acid of nitroaniline as volatiles. The infrared spectra were recorded in the4000–400 cm~(-1)frequency region. The Raman spectra were recorded in the external region of the anionic sublattice vibration 50–1500 cm~(-1). The optical band gap was calculated from the UV-Vis absorbance spectra using classical Tauc relation which was found to be 3.12 and 3.67 eV.     

A sodium gadolinium phosphate with two different types of tunnel structure: Synthesis, crystal structure, and optical properties of Na3GdP2O8

A sodium gadolinium phosphate crystal, Na₃GdP₂O₈, has been synthesized by a high-temperature solution reaction, and it exhibits a new structural family of the alkali-metal-rare-earth phosphate system. Although many compounds with formula M₃LnP₂O₈ have been reported, but they were shown to be orthorhombic [R. Salmon, C. Parent, M. Vlasse, G. LeFlem, Mater. Res. Bull. 13 (1978) 439] rather than monoclinic as shown in this paper. Single-crystal X-ray diffraction analysis shows the structure to be monoclinic with space group C2/c and the cell parameters: a=27.55 (25), b=5.312 (4), c=13.935(11) Å, β=91.30(1)°, and V=2038.80 Å³, Z=4. Its structure features a three-dimensional GdP₂O₈³⁻ anionic framework with two different types of interesting tunnels at where Na atoms are located by different manners. The framework is constructed by Gd polyhedra and isolated PO₄ tetrahedra. It is different from the structure of K₃NdP₂O₈ [R. Salmon, C. Parent, M. Vlasse, G. LeFlem, Mater. Res. Bull. 13 (1978) 439] with space group P2₁/m that shows only one type of tunnel. The emission spectrum and the absorption spectrum of the compound have been investigated. Additionally, the calculations of band structure, density of states, dielectric constants, and refractive indexes have been also performed with the density functional theory method. The obtained results tend to support the experimental data.     

Synthesis of the complex fluoride LiBaF3 and optical spectroscopy properties of LiBaF3:M(M=Eu,Ce) through a solvothermal process

The complex fluoride LiBaF₃ and LiBaF₃:M(M=Eu, Ce) is solvothermally synthesized at 180°C and characterized by means of X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. In the solvothermal process, the solvents, molar ratios of initial mixtures and reaction temperature play important roles in the formation of products. The excitation and emission spectra of the LiBaF₃:M(M=Eu,Ce) have been measured by fluorescence spectrophotometer. In the LiBaF₃:Eu emission spectra, there is one sharp line emission located at 360 nm arising from f→f transition of Eu²⁺ in the host lattice, and typical doublet 5d-4f emission of Ce³⁺ in LiBaF₃ powder is shown.     

Syntheses, crystal structures and optical properties of the first strontium selenium(IV) and tellurium(IV) oxychlorides: Sr3(SeO3)(Se2O5)Cl2 and Sr4(Te3O8)Cl4

Two new quaternary strontium selenium(IV) and tellurium(IV) oxychlorides, namely, Sr₃(SeO₃)(Se₂O₅)Cl₂ and Sr₄(Te₃O₈)Cl₄, have been prepared by solid-state reaction. Sr₃(SeO₃)(Se₂O₅)Cl₂ features a three-dimensional (3D) network structure constructed from strontium(II) interconnected by Cl⁻, SeO₃²⁻ as well as Se₂O₅²⁻ anions. The structure of Sr₄(Te₃O₈)Cl₄ features a 3D network in which the strontium tellurium oxide slabs are interconnected by bridging Cl⁻ anions. The diffuse reflectance spectrum measurements and results of the electronic band structure calculations indicate that both compounds are wide band-gap semiconductors.     

Ab-initio study of electronic,optical, thermal,and transport properties of Cr4AlB6

Theoretical investigation of different physical parameters of Cr₄AlB₆ have been done within the framework of density functional theory. Cr₄AlB₆ is a no band gap material. Its Cr-3d states contributes the most at the Fermi level. Thermal properties are investigated using quasi-harmonic Debye model as implemented in Gibbs code for different values of pressure and temperature. Study of transport property suggests that its electrical conductivity increases nonlinearly with increase in temperature but the relative change in its value is very low whereas its thermal conductivity increases linearly with the increase in temperature and relative increase in thermal conductivity is very high. The behavior of Cr₄AlB₆ is anisotropic and property is ceramic. It has potential applications in making ceramic capacitors. Its reflectivity is high in low energy region. It suggests that material can be used as coating material for far-infrared radiation. Study of the transport property suggests that because of very high value of thermal conductivity, it can be used for heat sink applications.     

Synthesis, crystal and band structures, and optical properties of a new lanthanide-alkaline earth tellurium(IV) oxide: La2Ba(Te3O8)(TeO3)2

A new quaternary lanthanide alkaline-earth tellurium(IV) oxide, La₂Ba(Te₃O₈)(TeO₃)₂, has been prepared by the solid-state reaction and structurally characterized. The compound crystallizes in monoclinic space group C2/c with a=19.119(3), b=5.9923(5), c=13.2970(19) Å, β=107.646(8)°, V=1451.7(3) Å³ and Z=4. La₂Ba(Te₃O₈)(TeO₃)₂ features a 3D network structure in which the cationic [La₂Ba(TeO₃)₂]⁴⁺ layers are cross-linked by Te₃O₈⁴⁻ anions. Both band structure calculation by the DFT method and optical diffuse reflectance spectrum measurements indicate that La₂Ba(Te₃O₈)(TeO₃)₂ is a wide band-gap semiconductor.     

Structural, electronic, and optical properties of CaCO3 aragonite

Density functional theory ab initio calculations of the structural parameters, electronic structure, carriers effective masses, and optical absorption of the CaCO₃ aragonite polymorph were performed within the local density and generalized gradient approximations, local density approximation (LDA) and generalized gradient approximation (GGA) respectively. A good agreement between the calculated lattice parameters and experimental results was obtained. Both the LDA and GGA results for CaCO₃ aragonite exhibit very close indirect and direct energy gaps, and the computed effective masses are heavy and anisotropic. Two optical absorption regimes related to distinct electronic transitions are predicted by the calculations.     

Synthesis, crystal structure and optical properties of BiMgVO5

The new vanadate BiMgVO₅ has been prepared and its structure has been determined by single crystal X-ray diffraction: space group P2₁/n, , , , β=107.38(5)°, wR₂=0.0447, R=0.0255. The structure consists of [Mg₂O₁₀] and [Bi₂O₁₀] dimers sharing their corners with [VO₄] tetrahedra. The ranges of bond lengths are 2.129-2.814 Å for Bi-O; 2.035-2.167 Å for Mg-O and 1.684-1.745 Å for V-O. V-O bond lengths determined from Raman band wavenumbers are between 1.679 and 1.747 Å. An emission band overlapping the entire visible region with a maximum around 650 nm is observed.     

Synthesis, crystal structure and optical investigation of the new phosphates: Na7Mg13Ln(PO4)12 (Ln=La, Eu)

Two new isostructural rare earth phosphates Na₇Mg₁₃Ln(PO₄)₁₂ (Ln=La, Eu) have been synthesized and investigated by X-ray diffraction and optical measurements. They crystallize in the orthorhombic system with the Cmc2₁ space group (Z=4). The crystal structure exhibits a new type of framework built up from LnO₈ (Ln=La, Eu), MO₆ (M=0.5Mg+0.5Na) and MgO_x (x=5, 6) polyhedra and PO₄ tetrahedra linked by common corner, edge or face. It can be described in terms of [Mg₄MP₄O₂₂]_∞ layers stacked along the a direction. These layers are interconnected by [Mg₄LnP₄O₃₆]_∞ undulating chains spreading along the b direction. This framework delimits 6 distinct cavities occupied by Na⁺ cations. The results of the optical study of Na₇Mg₁₃La_1−xEu_x(PO₄)₁₂ (x=0, 0.02, 0.1, 1) reveal the presence of two different Eu³⁺ ion environments whereas the X-ray study predicts the existence of only one Eu site. This difference can be explained by the possible presence of the europium element in the sodium sites with small occupancies which cannot be detected by the X-ray structural determination.     

The new silver(I)thioantimonate(III) [C4N2H14][Ag3Sb3S7] and a new structural variant of the silver(I)thioantimonate(III) [C2N2H9]2[Ag5Sb3S8] both synthesized under solvothermal conditions

The novel silver(I)thioantimonates(III) [C₄N₂H₁₄][Ag₃Sb₃S₇] (I) (C₄N₂H₁₂=1,4-diaminobutane) and [C₂N₂H₉]₂[Ag₅Sb₃S₈] (II) (C₂N₂H₈=ethylenediamine) were synthesized under solvothermal conditions using AgNO₃, Sb, S and the amines as structure directing molecules. Both compounds crystallize as orange needles with lattice parameters a=6.669(1) Å, b=30.440(3) Å, c=9.154(1) Å for I (space group Pnma), and a=6.2712(4) Å, b=15.901(1) Å, c=23.012(2) Å, β=95.37(1)° for II (space group P2₁/n). In both compounds the primary building units are trigonal SbS₃ pyramids, AgS₃ triangles and AgS₄ tetrahedra. In I the layered [Ag₃Sb₃S₇]²⁻ anion is constructed by two different chains. An [Sb₂S₄] chain running along [100] is formed by vertex sharing of SbS₃ pyramids. The second chain contains a Ag₃SbS₅ group composed of the AgS₄ tetrahedron, two AgS₃ units and one SbS₃ pyramid. The Ag₃SbS₅ units are joined via S atoms to form the second chain which is also directed along [100]. The layered anion is then obtained by condensation of the two individual chains. The organic structure director is sandwiched by the inorganic layers and the shortest inter-layer distance is about 6.4 Å. In II the primary building units are linked into different six-membered rings which form a honeycomb-like layer. Two such layers are connected via Ag-S bonds of the AgS₄ tetrahedra giving the final undulated double layer anion. The structure directing ethylenediamine cations are located in pairs between the layers and a sandwich-like arrangement of alternating anionic layers and organic cations is observed. The inter-layer separation is about 5.4 Å. Both compounds decompose in a more or less complex manner when heated in an argon atmosphere. The optical band gaps of about 1.9 eV for the two compounds proof the semiconducting behavior. For II the conductivity was measured with impedance spectroscopy and amounts to σ_295K=7.6×10⁻⁷ Ω⁻¹ cm⁻¹. At 80 °C the conductivity is significantly larger by one order of magnitude.     

Structural phase transition and 5f-electrons localization of PuSe explored by ab initio calculations

An investigation into the structural phase transformation, electronic and optical properties of PuSe under high pressure was conducted by using the full potential linearized augmented plane wave plus local orbitals (FP-LAPW+lo) method, in the presence and in the absence of spin-orbit coupling (SOC). Our results demonstrate that there exists a structural phase transition from rocksalt (B 1) structure to CsCl-type (B 2) structure at the transition pressure of 36.3 GPa (without SOC) and 51.3 GPa (with SOC). The electronic density of states (DOS) for PuSe show that the f-electrons of Pu are more localized and concentrated in a narrow peak near the Fermi level, which is consistent with the experimental studies. The band structure shows that B 1-PuSe is metallic. A pseudogap appears around the Fermi level of the total density of states of B 1 phase PuSe, which may contribute to its stability. The calculated reflectivity R(ω) shows agreement with the available experimental results. Furthermore, the absorption spectrum, refractive index, extinction coefficient, energy-loss spectrum and dielectric function were calculated. The origin of the spectral peaks was interpreted based on the electronic structures.