Lattice crossover and mixed valency in the LaCo1−xRhxO3 solid solution

The full LaCo_1−xRh_xO₃ solid solution was investigated utilizing structural, electrical transport, magnetic, and thermal conductivity characterization. Strong evidence for at least some conversion of Rh³⁺/Co³⁺ to Rh⁴⁺/Co²⁺ is found in both structural and electrical transport data. The crystal structure is that of a rhombohedrally distorted perovskite over the range 0.0≤x≤0.1. The common orthorhombic distortion of the perovskite structure is found over the range 0.2≤x≤1.0. A crossover of all three orthorhombic cell edges occurs at x=0.5 giving the appearance of a cubic structure, which actually remains orthorhombic. The octahedra in the orthorhombic structure must be distorted for x values less than 0.5, and the observed distortion suggests orbital ordering for Co²⁺. Electrical resistivity measurements as a function of temperature show semiconducting-like regions for all compositions. There is a steady increase in electrical resistivity as the Rh content increases. Large positive thermopower values are generally obtained above 475 K. With increasing Rh substitution there is a decrease in thermal conductivity, which slowly rises with increasing temperature due to increased electrical conductivity. The electronic part of the thermal conductivity is suppressed significantly upon Rh substitution. A thermoelectric figure-of-merit (ZT) of about 0.075 has been achieved for LaCo_0.5Rh_0.5O₃ at 775 K, and is expected to reach 0.15 at 1000 K.     

Verwey-type transition within the Pb3Rh7−xMnxO15 solid solution

A complete solid solution was found between isostructural Pb₃Mn₇O₁₅ and Pb₃Rh₇O₁₅. Single-crystals of two members of the solid solution Pb₃Rh_7−xMn_xO₁₅ (x=1.07 and 2.26) were grown and their crystal structures were determined. The Verwey-type transition for Pb₃Rh₇O₁₅ at 185 K remains with a 3% substitution of Mn for Rh but disappears with 4% substitution of Mn for Rh. The magnetic ordering temperature found for Pb₃Mn₇O₁₅ at about 70 K is maintained at a 43% substitution of Rh for Mn but has disappeared for 57% substitution of Rh for Mn. The unit cell volume of this layered structure contracts with increasing x for Pb₃Rh_7−xMn_xO₁₅ phases, but the structure actually expands in the direction perpendicular to the layers due to increased separation between the layers.     

Electron-poor SrAuxIn4−x (0.5?x?1.2) and SrAuxSn4−x (1.3?x?2.2) phases with the BaAl4-type structure

Solid solutions SrAu_xIn_4−x (0.5?x?1.2) and SrAu_xSn_4−x (1.3?x?2.2) have been prepared at 700 °C and their structures characterized by powder and single-crystal X-ray diffraction. They adopt the tetragonal BaAl₄-type structure (space group I4/mmm, Z=2; SrAu_1.1(1)In_2.9(1), a=4.5841(2) Å, c=12.3725(5) Å; SrAu_1.4(1)Sn_2.6(1), a=4.6447(7) Å, c=11.403(2) Å), with Au atoms preferentially substituting into the apical over basal sites within the anionic network. The phase width inherent in these solid solutions implies that the BaAl₄-type structure can be stabilized over a range of valence electron counts (vec), 13.0-11.6 for SrAu_xIn_4−x and 14.1-11.4 for SrAu_xSn_4−x. They represent new examples of electron-poor BaAl₄-type compounds, which generally have a vec of 14. Band structure calculations confirm that substitution of Au, with its smaller size and fewer number of valence electrons, for In or Sn atoms enables the BaAl₄-type structure to be stabilized in the parent binaries SrIn₄ and SrSn₄, which adopt different structure types.     

Crystal structure, conductivity and reversible water uptake of new layered potassium antimonates KxL(1+x)/3Sb(2−x)/3O2 (L=Ni, Mg, Co)

Novel mixed potassium antimonates K_0.59Mg_0.53Sb_0.47O₂, K_0.5Ni_0.5Sb_0.5O₂, K_0.5Co_0.5Sb_0.5O₂ (rhombohedral P3-type structure), K_0.56Ni_0.52Sb_0.48O₂ and K_0.86Co_0.62Sb_0.38O₂ (hexagonal P2 type) have layered structures based on brucite-like (L,Sb)O_6/3 sheets of edge-shared octahedra and interlayer K⁺ cations in trigonal prismatic coordination. The preference to form P2 and P3 structures rather than closely related O3 type is dictated by the large radius of K⁺ and the value of unit cell parameter a, restricted by average size of the cations randomly distributed in the octahedral sites within (L,Sb)O_6/3 layer. The new phases reversibly absorb atmospheric moisture leading to the formation of hydrates with ca. 11% larger interlayer distances. The impedance spectroscopy of P2-type K_0.56Ni_0.52Sb_0.48O₂ and P3-type K_0.59Mg_0.53Sb_0.47O₂ ceramics shows relatively high ionic conductivity, presumably due to potassium cationic transport, with activation energies of 35±2 and 33±1 kJ/mol, respectively. At 573 K, the conductivity values are 0.016 S/cm for K_0.56Ni_0.52Sb_0.48O₂ and 0.021 S/cm for K_0.59Mg_0.53Sb_0.47O₂. Interaction with water vapor leads to increasing total conductivity.     

Ternary lithium stannides LixT3Sn7−x (T=Rh, Ir)

The ternary stannides Li_xRh₃Sn_7−x (x=0.45, 0.64, 0.80) and Li_xIr₃Sn_7−x (x=0.62 and 0.66) were synthesized from the elements in sealed tantalum tubes in a water-cooled sample chamber of an induction furnace. The samples were characterized by X-ray diffraction on powders and single crystals. The stannides adopt the cubic Ir₃Ge₇-type structure (space group , Z=4). In this structure type the tin atoms occupy the Wyckoff positions 12d and 16f and form two interpenetrating frameworks consisting of cubes and square antiprisms. The rhodium and iridium atoms center the square antiprisms and are arranged in pairs. With increasing lithium substitution the lattice parameter of Ir₃Sn₇ (936.7) decreases via 932.2 pm (x=0.62) to 931.2 pm (x=0.66), while the Ir-Ir distance remains almost the same (290 pm). A similar trend is observed for the rhodium compounds. The lithium atoms substitute Sn on both framework sites. However, the 16f site shows a substantially larger preference for Li occupation. This is in contrast to the isotypic magnesium based compounds.     

Structure and physical properties of ternary W5Si3-type antimonides and bismuthides Zr5M1-xPn2+x (M=Cr, Mn; Pn=Sb, Bi)

Four new ternary compounds Zr₅M_1-xPn_2+x (M=Cr, Mn; Pn=Sb, Bi) were synthesized by arc-melting and annealing at 800 °C. They crystallize in the tetragonal W₅Si₃-type structure. The crystal structure of Zr₅Cr_0.49(2)Sb_2.51(2) was refined from powder X-ray diffraction data by the Rietveld method (Pearson symbol tI32, tetragonal, space group I4/mcm, Z=4, a=11.1027(6) Å, c=5.5600(3) Å). Four-probe electrical resistivity measurements on sintered polycrystalline samples indicated metallic behavior. Magnetic susceptibility measurements between 2 and 300 K revealed temperature-independent Pauli paramagnetism for Zr₅Cr_1-xSb_2+x and Zr₅Cr_1-xBi_2+x, but a strong temperature dependence for Zr₅Mn_1-xSb_2+x and Zr₅Mn_1-xBi_2+x which was fit to the Curie-Weiss law for the latter with θ=-11.3 K and μ_eff=1.81(1) μ_B. Band structure calculations for Zr₅Cr_0.5Sb_2.5 support a structural model in which Cr and Sb atoms alternate within the chain of interstitial sites formed at the centers of square antiprismatic Zr₈ clusters.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

Synthesis and electrical conductivity of perovskite-type PrCo1−xMgxO3

Oxides in the system PrCo_1−xMg_xO₃ (x=0.0, 0.05, 0.10, 0.15, 0.20, 0.25) were synthesized by citrate technique and characterized by powder X-ray diffraction and scanning electron microscope. All compounds have a cubic perovskite structure (space group ). The maximum ratio of doped Mg in the system PrCo_1−xMg_xO₃ is x=0.2. Further doping leads to the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃. The substitution of Mg for Co improves the performance of PrCoO₃ as compared to the electrical conductivity measured by a four-probe electrical conductivity analyzer in the temperature range from 298 to 1073 K. The substitution of Mg for Co on the B site may be compensated by the formations of Co⁴⁺ and oxygen vacancies. The electrical conductivity of PrCo_1−xMg_xO₃ oxides increases with increasing x in the range of 0.0-0.2. The increase in conductivity becomes considerable at the temperatures ?673 K especially for x?0.1; it reaches a maximum at x=0.2 and 1073 K. From x>0.2 the conductivity of PrCo_1−xMg_xO₃ starts getting lower. This is probably a result of the segregation of Pr₆O₁₁ in PrCo_1−xMg_xO₃ , which blocks oxygen transport, and association of oxygen vacancies. A change in activation energy for all PrCo_1−xMg_xO₃ compounds (x=0-0.25) was observed, with a higher activation energy above 573 K and a lower activation energy below 573 K. The reasons for such a change are probably due to the change of dominant charge carriers from Co⁴⁺ to Vö in PrCo_1−xMg_xO₃ oxides and a phase transition mainly starting at 573 K.     

Effect of La filling on thermoelectric properties of LaxCo3.6Ni0.4Sb12-filled skutterudite prepared by MA-HP method

Starting from elemental powder mixtures, single-phase La_xCo_3.6Ni_0.4Sb₁₂(x=0, 0.1, 0.4, 0.6)-filled skutterudites were synthesized via the route of mechanical alloying-hot pressing (MA-HP) in this paper. With increasing of La fraction, the lattice spacing of filled skutterudite phase increases and its variation follows the Vegard's law. The magnitude of the Seebeck coefficient and electrical resistivity show slight increases with increasing of La filling fraction; thermal conductivity of the filled skutterudite decreases and the resultant figure of merit increases with increase of La filling fraction. The as-HPed filled skutterudite has a composite nanocrystalline microstructure, which includes some coral-like clusters with relatively large spoke-like grains about 300 nm in length and a superfine equiaxial nanocrystalline matrix with an average grain size of about 50 nm. The coral-like cluster corresponds to the prime filled skutterudite formed directly by MA, while the filled skutterudite formed during hot pressing, which has the same nucleation condition and experiences less grain growth, develops equiaxially into the superfine nanocrystalline matrix.     

Partial substitution of rhodium for cobalt in the misfit [Pb0.7Co0.4Sr1.9O3][CoO2]1.8 oxide

The partial substitution of Co by Rh in the [Pb_0⋅7Co_0.4Sr_1.9O₃]^RS[CoO₂]_1.8 family has been investigated. By transmission electron microscopy and X-ray powder diffraction, it is shown that the substitution of Rh for Co takes place at the two cobalt sites of the structure but for the low enough Rh contents, this substitution is made preferentially at the level of the CdI₂-like layer. Thus, a generic formula [Pb_0.7(Co_0.4−zRh_z)Sr_1.9O₃]^RS[Co_1−yRh_yO₂]_b1/b2 (0?y?0.5 and 0?z?0.3) can be proposed for this new family of misfit phase. As observed for the pure misfit cobaltite, the thermoelectric power is also very large, close to +140 μV/K at room temperature. The Rh cation can adopt a mixed valency Rh³⁺/Rh⁴⁺ (4d⁶/4d⁵) with low spin states t_2g⁶/t_2g⁵ equivalent to the ones of low spin Co³⁺/Co⁴⁺ (3d⁶/3d⁵). The large thermopower observed in the Rh substituted compounds is therefore a direct proof that the coexistence of low spin states t_2g⁶/t_2g⁵ contributes to the thermoelectric power enhancement in these oxides.     

Crystal chemistry of Co-doped Zn7Sb2O12

Zn₇Sb₂O₁₂ forms a full range of Co-containing α solid solutions, Zn_7−xCo_xSb₂O₁₂, with an inverse-spinel structure at high temperature. At low temperatures for x<2, the solid solutions transform into the low temperature β-polymorph. For x=0, the β→α transition occurs at 1225±25 °C; the transition temperature decreases with increasing x. At high x and low temperatures, α solid solutions are formed but are non-stoichiometric; the (Zn+Co):Sb ratio is >7:2 and the compensation for the deficiency in Sb is attributed to the partial oxidation of Co²⁺ to Co³⁺. From Rietveld refinements using ND data, Co occupies both octahedral and tetrahedral sites at intermediate values of x, but an octahedral preference attributed to crystal field stabilisation, causes the lattice parameter plot to deviate negatively from the Vegard's law. Sub-solidus compatibility relations in the ternary system ZnO-Sb₂O₅-CoO have been determined at 1100 °C for the compositions containing ?50% Sb₂O₅.     

Thermoelectric properties of p-type pseudo-binary (Ag0.365Sb0.558Te)x-(Bi0.5Sb1.5Te3)1−x (x=0-1.0) alloys prepared by spark plasma sintering

In this paper, pseudo-binary (Ag_0.365Sb_0.558Te)_x-(Bi_0.5Sb_1.5Te₃)_1−x (x=0-1.0) alloys were prepared using spark plasma sintering technique, and the composition-dependent thermoelectric properties were evaluated. Electrical conductivities range from 7.9×10⁴ to 15.6×10⁴ Ω⁻¹ m⁻¹ at temperatures of 507 and 318 K, respectively, being about 3.0 and 8.5 times those of Bi_0.5Sb_1.5Te₃ alloy at the corresponding temperatures. The optimal dimensionless figure of merit (ZT) of the sample with molar fraction x=0.025 reaches 1.1 at 478 K, whereas that of the ternary Bi_0.5Sb_1.5Te₃ alloy is 0.58 near room temperature. The results also reveal that a direct introduction of Ag_0.365Sb_0.558Te in the Bi-Sb-Te system is much more effective to the property improvement than naturally precipitated Ag_0.365Sb_0.558Te in the Ag-doped Ag-Bi-Sb-Te system.     

Structural characterization, magnetic behavior and high-resolution EELS study of new perovskites Sr2Ru2−xCoxO6−δ (0.5?x?1.5)

New oxides of general formula Sr₂Ru_2−xCo_xO_6−δ (0.5?x?1.5) have been synthesized as polycrystalline materials and characterized structurally by X-ray diffraction. For 0.5?x<0.67 the orthorhombic, Pnma, perovskite structure of the end member, SrRuO₃, is found. At x=0.67 a phase separation into an Ru-rich Pnma phase and a Co-rich I2/c phase occurs. The I2/c form is also found for x=1.0 but another orthorhombic phase, Imma, obtains for x=1.33 and 1.5. Reductive weight losses indicate negligible oxygen non-stoichiometry, i.e., δ∼0, for all compositions even those rich in Co. High-resolution electron energy loss spectroscopy (EELS) indicates that cobalt is high-spin Co³⁺ or high-spin Co⁴⁺ for all x. Appropriate combinations of Ru⁴⁺, Ru⁵⁺, HS Co³⁺ and HS Co⁴⁺ are proposed for each x which are consistent with the observed Ru(Co)-O distances. Significant amounts of Co⁴⁺ must be present for large x values to explain the short observed distances. Broad maxima in the d.c. susceptibilities are found between 78 and 97 K with increasing x, along with zero-field-cooled (ZFC) and field-cooled (FC) divergences suggesting glassy magnetic freezing. A feature near 155 K for all samples indicates a residual amount of ferromagnetic SrRuO₃ not detected by X-ray diffraction.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Mixed conductivity and Mössbauer spectra of (La0.5Sr0.5)1−xFe1−yAlyO3−δ (x=0-0.05, y=0-0.30)

Aluminum incorporation in the rhombohedrally distorted perovskite lattice of (La_0.5Sr_0.5)_1−xFe_1−yAl_yO_3−δ (x=0-0.05, y=0-0.30) decreases the unit cell volume and partial ionic and p-type electronic conductivities, while the oxygen nonstoichiometry and thermal expansion at 900-1200 K increase on doping. The creation of A-site cation vacancies has an opposite effect on the transport properties of Al-substituted ceramics. The maximum A-site deficiency tolerated by the (La,Sr)(Fe,Al)O_3−δ structure is however limited, close to 3-4%. The Mössbauer spectroscopy revealed progressive localization of electron holes and a mixed charge-compensation mechanism, which results in higher average oxidation state of iron when Al³⁺ concentration increases. The average thermal expansion coefficients of (La_0.5Sr_0.5)_1−xFe_1−yAl_yO_3−δ are (12.2-13.0)×10⁻⁶ K⁻¹ at 300-900 K and (20.1-30.0)×10⁻⁶ K⁻¹ at 900-1200 K in air. The steady-state oxygen permeability (OP) of dense Al-containing membranes is determined mainly by the bulk ionic conductivity. The ion transference numbers at 973-1223 K in air, calculated from the oxygen permeation and faradaic efficiency (FE) data, vary in the range 1×10⁻⁴-3×10⁻³, increasing with temperature.     

Local structure and influence of bonding on the phase-change behavior of the chalcogenide compounds K1−xRbxSb5S8

KSb₅S₈ and its solid solution analogs with Rb and Tl were found to exhibit a reversible and tunable glass→crystal→glass phase transition. Selected members of this series were analyzed by differential scanning calorimetry to measure the effect of the substitution on the thermal properties. The solid solutions K_1−xRb_xSb₅S₈ exhibited clear deviations in melting and crystallization behavior and temperatures from the parent structure. The crystallization process of the glassy KSb₅S₈ as a function of temperature could clearly be followed with Raman spectroscopy. The thermal conductivity of both glassy and crystalline KSb₅S₈ at room temperature is ∼0.40 W/m K, among the lowest known values for any dense solid-state material. Electronic band structure calculations carried out on KSb₅S₈ and TlSb₅S₈ show the presence of large indirect band-gaps and confirm the coexistence of covalent Sb-S bonding and predominantly ionic K(Tl)?S bonding. Pair distribution function analyses based on total X-ray scattering data on both crystalline and glassy K_1−xRb_xSb₅S₈ showed that the basic structure-defining unit is the same and it involves a distorted polyhedron of “SbS₇” fragment of ∼7 Å diameter. The similarity of local structure between the glassy and crystalline phases accounts for the facile crystallization rate in this system.     

Doping studies of the magnetic cobaltocuprate CoSr2Y2−xCexCu2O9±δ

A structural, magnetic and electronic study of the cobaltocuprate CoSr₂Y_2−xCe_xCu₂O_9±δ (x=0.5-0.8) has been performed. All materials crystallise in the orthorhombic Cmcm symmetry space group in which chains of corner linked CoO₄ tetrahedra run parallel to the 1 1 0 direction. An antiferromagnetic transition is observed for x=0.5-0.8; T_M increases with x. A change in the dimensionality of the magnetic order occurs at x=0.8 as the interchain distance increases to a critical value. There is charge transfer between the cuprate planes and cobaltate layer as Ce doping increases, so that Co³⁺ is partially oxidised to Co⁴⁺ with a concomitant reduction in the valence of Cu. Superconductivity is not observed in any of the samples and a crossover from Mott to Efros and Shklovskii variable range hopping behaviour is evidenced as x increases from 0.5 to 0.8.     

Spin-driven ferroelectricity in the delafossite CuFe1−xRhxO2 (0≤x≤0.15)

The effect of substitution at the Fe site in the CuFeO₂ delafossite is known to induce a magnetic structure responsible for the appearance of electric polarization. A CuFe_1−xRh_xO₂ series of ceramic samples is studied in order to determine the composition range exhibiting such a polar state. It is found that for the CuFe_1−xRh_xO₂ (x≤0.15) solid solution, the Néel temperature T_N2 decreases monotonously with x from 11.5 K to 5.9 K, for x=0.00 to 0.15, respectively, and that the dielectric peak and the polarization transition temperatures coincide with T_N2. In contrast, the dielectric peak and polarization magnitudes go through an optimum for CuFe_0.92Rh_0.08O₂ (x=0.08). These results demonstrate that, compared to other substituting elements, the Rh³⁺ for Fe³⁺ substitution in CuFeO₂ allows to extend significantly the ferroelectric region in the (x, T) phase diagram in connection with the slower T_N2 decrease.     

New transparent conductors with the M7O12 ordered oxygen-deficient fluorite structure: from In4Sn3O12 to In5.5Sb1.5O12

A new transparent conductor, containing pentavalent antimony, In_4+xSn_3−2xSb_xO₁₂, has been synthesized for 0?x?1.5. The latter exhibits an ordered oxygen-deficient fluorite structure with an ordered distribution of Sb⁵⁺ and In³⁺/Sn⁴⁺ species in the octahedral and seven-fold coordinated sites, respectively. More importantly, it is shown that the electronic conductivity of this transparent conducting oxide (TCO) at room temperature, is one order of magnitude larger for x=1 (In₅SnSbO₁₂) than for x=0 (In₄Sn₃O₁₂) and it turns to a semi-metallic behavior in contrast to In₄Sn₃O₁₂ which is a semi-conductor. The potential of this new material, as TCO, is also shown by its reflectance spectra, similar to In₄Sn₃O₁₂, involving only a small increase of the optical bandgap, by 0.15 eV.     

Investigation of the quasi-ternary system LaMnO3-LaCoO3-“LaCuO3”—I: the series La(Mn0.5Co0.5)1−xCuxO3−δ

The La(Mn_0.5Co_0.5)_1−xCu_xO_3−δ series with x=0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1 was synthesized by the Pechini method to obtain insight into the phase formation in the quasi-ternary LaMnO₃-LaCoO₃-“LaCuO₃” system caused by the instability of LaCuO₃ under ambient conditions. After sintering at 1100°C some remarkable results were obtained: LaMn_0.3Co_0.3Cu_0.4O_3−δ crystallized as a single phase in the orthorhombic perovskite structure typical of LaCuO₃. Among the synthesized compositions this compound showed the highest electrical conductivity in air at 800°C (155 S cm⁻¹) and also the highest thermal expansion coefficient (α_30−800°C=15.4×10⁻⁶ K⁻¹). The LaCuO_3−δ composition also crystallized as a single phase but in a monoclinic structure although previous investigations have shown that other phases are preferably formed after sintering at 1100°C. The electrical conductivity and thermal expansion coefficient were the lowest within the series of compositions, i.e. 9.4 S cm⁻¹ and 11.9×10⁻⁶ K⁻¹, respectively.