Relationship between interlayer hydration and photocatalytic water splitting of A′1−xNaxCa2Ta3O10·nH2O (A′=K and Li)

Partial replacement of alkaline metals in anhydrous KCa₂Ta₃O₁₀ and LiCa₂Ta₃O₁₀ was studied to control interlayer hydration and photocatalytic activity for water splitting under UV irradiation. A′_1−xNa_xCa₂Ta₃O₁₀·nH₂O (A′=K and Li) samples were synthesized by ion exchange of CsCa₂Ta₃O₁₀ in mixed molten nitrates at 400 °C. In K_1−xNa_xCa₂Ta₃O₁₀·nH₂O, two phases with the orthorhombic (C222) and tetragonal (I4/mmm) structures were formed at x?0.7 and x?0.5, respectively. Upon replacement by Na⁺ having a larger enthalpy of hydration (ΔH_h⁰), the interlayer hydration occurred at x?0.3 and the hydration number (n) was increased monotonically with an increase of x. Li_1−xNa_xCa₂Ta₃O₁₀·nH₂O showed a similar hydration behavior, but the phase was changed from I4/mmm (x<0.5, n∼0) via P4/mmm (x∼0.5, n∼1) to I4/mmm (x∼1.0, n∼2). The photocatalytic activities of these systems after loading 0.5 wt% Ni were quite different each other. K_1−xNa_xCa₂Ta₃O₁₀·nH₂O exhibited the activity increasing in consistent with n, whereas Li_1−xNa_xCa₂Ta₃O₁₀·nH₂O exhibited the activity maximum at x=0.77, where the rates of H₂/O₂ evolution were nearly doubled compared with those for end-member compositions (x=0 and 1).     

Structural and magnetic characterization of BiFexMn2-xO5 oxides (x=0.5, 1.0)

The title compounds have been synthesized by a citrate technique followed by thermal treatments in air (BiFe_0.5Mn_1.5O₅) or under high oxygen pressure conditions (BiFeMnO₅), and characterized by X-ray diffraction (XRD), neutron powder diffraction (NPD) and magnetization measurements. The crystal structures have been refined from NPD data in the space group Pbam at 295 K. These phases are isostructural with RMn₂O₅ oxides (R=rare earths) and contain infinite chains of Mn⁴⁺O₆ octahedra sharing edges, linked together by (Fe,Mn)³⁺O₅ pyramids and BiO₈ units. These units are strongly distorted with respect to those observed in other RFeMnO₅ compounds, due to the presence of the electronic lone pair on Bi³⁺. It is noteworthy the certain level of antisite disorder exhibited in both samples, where the octahedral positions are partially occupied by Fe cations, and vice versa. BiFe_xMn_2−xO₅ (x=0.5, 1.0) are short-range magnetically ordered below 20 K for x=0.5 and at 40 K for x=1.0. The main magnetic interactions seem to be antiferromagnetic (AFM); however, the presence of a small hysteresis in the magnetization cycles indicates the presence of some weak ferromagnetic (FM) interactions.     

Solution precursor synthesis and magnetic properties of Eu1−xCaxTiO3

Europium titanate, EuTiO₃, is a paraelectric/antiferromagnetic cubic perovskite with T_N=5.5 K. It is predicted that compressive strain could induce simultaneous ferroelectricity and ferromagnetism in this material, leading to multiferroic behavior. As an alternative to epitaxial strain, we explored lattice contraction via chemical substitution of Eu²⁺ with the smaller Ca²⁺ cation as a mechanism to tune the magnetic properties of EuTiO₃. A modified sol-gel process was used to form homogeneously mixed precursors containing Eu³⁺, Ca²⁺, and Ti⁴⁺, and reductive annealing was used to transform these precursors into crystalline powders of Eu_1−xCa_xTiO₃ with x=0.00, 0.05, 0.10, 0.15, 0.25, 0.35, 0.50, 0.55, 0.60, 0.65, 0.80, and 1.00. Powder XRD data indicated that a continuous Eu_1−xCa_xTiO₃ solid solution was readily accessible, and the lattice constants agreed well with those predicted by Vegard's law. SEM imaging and EDS element mapping indicated a homogeneous distribution of Eu, Ca, and Ti throughout the polycrystalline sample, and the actual Eu:Ca ratio agreed well with the nominal stoichiometry. Measurements of magnetic susceptibility vs. temperature indicated antiferromagnetic ordering in samples with x≤0.60, with T_N decreasing from 5.4 K in EuTiO₃ to 2.6 K in Eu_0.40Ca_0.60TiO₃. No antiferromagnetic ordering above 1.8 K was detected in samples with x>0.60.     

Thermochemistry of Li1+xMn2−xO4 (0?x?1/3) spinel

Lithium substituted Li_1+xMn_2−xO₄ spinel samples in the entire solid solution range (0?x?1/3) were synthesized by solid-state reaction. The samples with x<0.25 are stoichiometric and those with x?0.25 are oxygen deficient. High-temperature oxide melt solution calorimetry in molten 3Na₂O·4MoO₃ at 974 K was performed to determine their enthalpies of formation from constituent binary oxides at 298 K. The cubic lattice parameter was determined from least-squares fitting of powder XRD data. The variations of the enthalpy of formation from oxides and the lattice parameter with x follow similar trends. The enthalpy of formation from oxides becomes more exothermic with x for stoichiometric compounds (x<0.25) and deviates endothermically from this trend for oxygen-deficient samples (x?0.25). This energetic trend is related to two competing substitution mechanisms of lithium for manganese (oxidation of Mn³⁺ to Mn⁴⁺ versus formation of oxygen vacancies). For stoichiometric spinels, the oxidation of Mn³⁺ to Mn⁴⁺ is dominant, whereas for oxygen-deficient compounds both mechanisms are operative. The endothermic deviation is ascribed to the large endothermic enthalpy of reduction.     

Electron-doping through La-for-Sr substitution in (Sr1−xLax)2FeTaO6: Effects on the valences and ordering of the B-site cations, Fe and Ta

We have employed aliovalent A-site cation substitution, La^III-for-Sr^II, to dope the Sr(Fe_0.5Ta_0.5)O₃ perovskite oxide with electrons. Essentially single-phase samples of (Sr_1−xLa_x)(Fe_0.5Ta_0.5)O₃ were successfully synthesized up to x≈0.3 in a vacuum furnace at 1400 °C. The samples were found to crystallize (rather than with orthorhombic symmetry) in monoclinic space group P2₁/n that accounts for the partial ordering of the B-site cations, Fe and Ta. With increasing La-substitution level, x, the degree of Fe/Ta order was found to increase such that the La-richest compositions are best described by the B-site ordered double-perovskite formula, (Sr,La)₂FeTaO₆. From Fe L₃ and Ta L₃ XANES spectra it was revealed that upon electron doping the two B-site cations, Fe^III and Ta^V, are both prone to reduction. Magnetic susceptibility measurements showed spin-glass type behaviour for all the samples with a transition temperature slightly increasing with increasing x.     

Influence of the structure on electric and magnetic properties of La0.8Na0.2Mn1−xCoxO3 perovskites

The influence of the cobalt substitution for manganese ions in the mixed valence perovskites La_0.8Na_0.2Mn_1−xCo_xO₃ (0?x?0.2) was investigated by X-ray, electric transport and magnetic measurements. The study carried out on sintered polycrystalline samples revealed the rhombohedral () structure and the insulator-metal transition connected with a ferromagnetic arrangement in the whole concentration range. Increasing concentration of cobalt ions leads to a gradual decrease of PM-FM and I-M transition temperatures. An influence of the cobalt ions on the observed behavior is attributed to charge compensation Mn³⁺→Mn⁴⁺ leading to the formation of stable couples Mn⁴⁺-Co²⁺. Therefore the double-exchange interactions Mn³⁺-O²⁻-Mn⁴⁺ partly vanish and they are replaced by positive superexchange interactions Mn⁴⁺-O²⁻-Co²⁺, but of a semiconducting character.     

Study of the Solid Solutions of LiNbO3and LiTaO3with Mn

Two unusual, extensive new solid solutions of LiNbO₃and LiTaO₃with MnO have been prepared, where 4Mn²⁺replace a combination of 3Li⁺and a pentavalent cation: Nb⁵⁺or Ta⁵⁺. The formulas are Li_1−xM_1−xMn_4xO₃, 0<x<0.13, forM=Nb and 0<x<0.23 forM=Ta. The solid solutions were characterized by X-ray powder diffraction and density measurements. The manganese oxidation states were determined by X-ray photoelectron spectroscopy.     

Evolution of structure and magnetic properties in electron-doped double perovskites, Sr2−xLaxMnWO6 (0?x?1)

Powder neutron and X-ray diffraction studies show that the double perovskites in the region 0?x?1 exhibit two crystallographic modifications at room temperature: monoclinic P2₁/n and tetragonal I4/m, with a boundary at 0.75<x<0.9. Magnetic susceptibility measurements indicate that for x=0 and 0.5 Sr_2−xLa_xMnWO₆ orders antiferromagnetically (AFM) at 15 and 25 K, respectively, for 0.75?x<1.0, a contribution of weak ferromagnetism (FM), probably due to canted-AFM order, increases with increasing x. The end point compound SrLaMnWO₆ shows the strongest FM cluster effect; however, no clear evidence of magnetic order is discernable down to 4.2 K. X-ray absorption spectroscopy (XAS) confirms Mn²⁺ and mixed-valent W^6+/5+ formal oxidation states in Sr_2−xLa_xMnWO₆.     

Mild hydrothermal synthesis and magnetic properties of the manganates Pr1−xCaxMnO3

The calcium-doped manganates, Pr_1−xCa_xMnO₃ (x=0.39, 0.46, 0.70, 0.76), were synthesized as cube-shaped crystalline phases under mild hydrothermal conditions for the first time. The crystals could be grown in one step from solutions of metal salts and potassium hydroxide at temperatures ∼240 °C, and found to adopt perovskite-like structure (space group Pbnm). Samples were characterized by powder X-ray diffraction, scanning electron microscopy, inductively coupled plasma analysis and variable temperature dc/ac magnetic susceptibility. The studies indicate that formation of the materials is dependent on the alkalinity and composition of the initial reaction mixtures. The magnetic properties show spin-glass-like behavior due to competing ferromagnetic (FM) and antiferromagnetic (AFM) exchange interactions in Pr_1−xCa_xMnO₃ with x=0.39, 0.46.     

Structural and physical properties evolution of BaIr1−xMnxO3 solid solutions synthesized by high-pressure sintering

The BaIr_1−xMn_xO₃ (0.0≤x≤1.0) solid solutions were synthesized by using the solid-state chemical method and high pressure sintering in the pressure range 0-5 GPa. According to the pressure-composition “phase diagram” at 1000 °C, the 9M BaIr_1−xMn_xO₃ transforms to the 6M form at 5 GPa and x≤1/6. In the x range 0.5-1.0, it transforms to the 9R form in a large pressure range. For the 9M BaIrO₃, the Mn ions substitution for Ir ions enhances the semiconducting property, and reduces the weak ferromagnetism. When x is larger than 1/3, the 9M/9R BaIr_1−xMn_xO₃ behave spin-glass-like state at low temperature, with the glass transition temperature T_g about 60 K. For the 6M BaIrO₃, the Mn ions doping results in that it transforms to insulator and spin-glass-like magnetism from the initial paramagnetic metal.     

Mn environment in layered Li[Mg0.5−xNixMn0.5]O2 oxides monitored by EPR spectroscopy

X-band and high-frequency EPR spectroscopy were used for studying the manganese environment in layered Li[Mg_xNi_0.5−xMn_0.5]O₂, 0?x?0.5. Both layered LiMg_0.5Mn_0.5O₂ and monoclinic Li[Li_1/3Mn_2/3]O₂ oxides (containing Mn⁴⁺ ions only) were used as EPR standards. The EPR study was extended to the Ni-substituted analogues, where both Ni²⁺ and Mn⁴⁺ are paramagnetic. For LiMg_0.5−xNi_xMn_0.5O₂ and Li[Li_(1−2x)/3Ni_xMn_(2−x)/3]O₂, an EPR response from Mn⁴⁺ ions only was detected, while the Ni²⁺ ions remained EPR silent in the frequency range of 9.23-285 GHz. For the diamagnetically diluted oxides, LiMg_0.25Ni_0.25Mn_0.5O₂ and Li[Li_0.10Ni_0.35Mn_0.55]O₂, two types of Mn⁴⁺ ions located in a mixed (Mn-Ni-Li)-environment and in a Ni-Mn environment, respectively, were registered by high-field experiments. In the X-band, comparative analysis of the EPR line width of Mn⁴⁺ ions permits to extract the composition of the first coordination sphere of Mn in layered LiMg_0.5−xNi_xMn_0.5O₂ (0?x?0.5) and Li[Li_(1−2x)/3Ni_xMn_(2−x)/3]O₂ (x>0.2). It was shown that a fraction of Mn⁴⁺ are in an environment resembling the ordered “α,β”-type arrangement in Li_1−δ1Ni_δ1[Li_{(1−2x)/3+δ1}Ni_2x/3−δ1)_α(Mn_(2−x)/3Ni_x/3)_β]O₂ (where and δ₁=0.06 were calculated), while the rest of Mn⁴⁺ are in the Ni,Mn-environment corresponding to the Li_1−δ2Ni_δ2[Ni_1−yMn_y]O₂ () composition with a statistical Ni,Mn distribution. For Li[Li_(1−2x)/3Ni_xMn_(2−x)/3]O₂ with x?0.2, IR spectroscopy indicated that the ordered α,β-type arrangement is retained upon Ni introduction into monoclinic Li[Li_1/3Mn_2/3]O₂.     

Structural and physical properties evolution in the 6H BaRu1−xMnxO3 synthesized under high pressure

The 6H BaRu_1−xMn_xO₃ with the hexagonal BaTiO₃ structure was synthesized using high-pressure sintering method. It is found that the lattice parameter deviates from Vegard's law at x=0.3 for the solid solutions due to the charge transfer effects at B-site. The substitution of Mn for Ru cations gives rise to the short-range magnetic ordering, due to the disordered arrangement of Ru and Mn cations. The compounds are weak ferromagnetic in the x range 0.05-0.40, with the maximal Curie temperature T_c 175.2 K at x=0.10. They are of spin-glass-like magnetism at lower temperature at x?0.1. With Mn doping, the 6H BaRuO₃ transforms to a semiconductor from the primal metal at x=0.30. The resistance as a function of temperature below about 70 K follows the two-dimensional variable-range hopping conduction mechanism in BaRu_0.50Mn_0.50O₃.     

Structure and electrical properties of single-phase cobalt manganese oxide spinels Mn3−xCoxO4 sintered classically and by spark plasma sintering (SPS)

Cobalt manganese oxide spinels Mn_3−xCo_xO₄ (with 0.98?x?3) were prepared by the thermal decomposition in air of oxalate precursors. The influence of the thermal treatments on the structure of these materials is emphasized. Single-phase ceramics were obtained after optimization of the sintering parameters. A precise phase diagram for the Co-Mn-O system is proposed according to thermal stability and structure of oxide powders. The electrical measurements on single-phase ceramics show that low values of resistivity can be achieved. The conduction could take place through jumps of polarons between Mn³⁺ and Mn⁴⁺ on octahedral sites. These compounds present interesting electrical characteristics for negative temperature coefficient (NTC) thermistor applications.     

Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1−xCaxCr1−yTiyO3−δ (x=0-1, y=0-1)

Five series of perovskite-type compounds in the system La_1−xCa_xCr_1−yTi_yO₃ with the nominal compositions y=0, x=0-0.5; y=0.2, x=0.2-0.8; y=0.5, x=0.5-1.0; y=0.8, x=0.6-1.0 and y=1, x=0.8-1 were synthesized by a ceramic technique in air (final heating 1350 °C). On the basis of the X-ray analysis of the samples with (Ca/Ti)?1, the phase diagram of the CaTiO₃-LaCr^IIIO₃-CaCr^IVO₃ quasi-ternary system was constructed. Extended solid solution with a wide homogeneity range is formed in the quasi-ternary system CaCr^IVO₃-CaTiO₃-LaCr^IIIO₃. The solid solution La_{(1−x′−y)}Ca_(x′+y)Cr^IV_x′Cr^III_{(1−x′−y)}Ti_yO₃ exists by up to 0.6-0.7 mol fractions of CaCr^IVO₃ (x^′<0.6-0.7) at the experimental conditions. The crystal structure of the compounds is orthorhombic in the space group Pbnm at room temperature. The lattice parameters and the average interatomic distances of the samples within the solid solution ranges decrease uniformly with increasing Ca content. Outside the quasi-ternary system, the nominal compositions La_0.1Ca_0.9TiO₃, La_0.2Ca_0.8TiO₃, La_0.4Ca_0.6Cr_0.2Ti_0.8O₃ and La_0.3Ca_0.7Cr_0.2Ti_0.8O₃ in the system La_1−xCa_xCr_1−yTi_yO₃ were found as single phases with an orthorhombic structure. In the temperature range between 850 and 1000 °C, the synthesized single-phase compositions are stable at pO₂=6×10⁻¹⁶-0.21×10⁵ Pa. Oxygen stoichiometry and electrical conductivity of the separate compounds were investigated as functions of temperature and oxygen partial pressure. The chemical stability of these oxides with respect to oxygen release during thermal dissociation decreases with increasing Ca-content. At 900 °C and oxygen partial pressure 1×10⁻¹⁵-0.21×10⁵ Pa, the compounds with x>y (acceptor doped) are p-type semiconductors and those with x<y (donor doped) and x=y are n-type semiconductors. The type and level of electrical conductivity are functions of the concentration ratios of cations occupying the B-sites of the perovskite structures: [Cr³⁺]/[Cr⁴⁺] and [Ti⁴⁺]/[Ti³⁺]. The maximum electrical conductivity at 900 °C and pO₂=10⁻¹⁵ Pa was found for the composition La_0.1Ca_0.9TiO₃ (near 50 S/cm) and in air at 900 °C for La_0.5Ca_0.5CrO₃ (close to 100 S/cm).     

Neutron diffraction and magnetic study of the Nd0.7Pb0.3Mn1−xFexO3 (0?x?0.1) perovskites

The effect of Fe doping on the ferromagnetic Nd_0.7Pb_0.3Mn_1−xFe_xO₃ (x=0, 0.025, 0.05, 0.075, 0.1) phases has been studied in order to analyze the double-exchange interaction. The structural and magnetic study has been carried out by neutron powder diffraction and susceptibility measurements between 1.7 and 300 K. The substitution of Fe at the Mn site results in reductions in both the Curie temperature T_c and the magnetic moment per Mn ion without appreciable differences in the crystal structures. All the compounds crystallize in Pnma space group. The thermal evolution of the lattice parameters of the Nd_0.7Pb_0.3Mn_1−xFe_xO₃ (x=0.025, 0.05, 0.075) compounds shows discontinuities in volume and lattice parameters close to the magnetic transition temperature. Increasing amounts of Fe³⁺ reduces the double exchange interactions and no magnetic contribution for x=0.1 is observed. The magnetic structures of Nd_0.7Pb_0.3Mn_1−xFe_xO₃ (x=0, 0.025, 0.05, 0.075) compounds show that the Nd and Mn ions are ferromagnetically ordered.     

Structural characterization and electrical properties of NiNb2−xTaxO6 (0≤x≤2) and some Ti-substituted derivatives

A structural and electrical characterization of the system NiNb_2−xTa_xO₆ (0≤x≤2) is presented. For x≤0.25 materials with the columbite-type structure typical of NiNb₂O₆ have been obtained whereas for x≥1 tri-rutile-like oxides were obtained. The electrical properties are similar in both cases; they are semiconducting with very low electrical conductivity and very high activation energy, though slight differences were found as a function of Ta content. Improvement of conductivity by reducing the stoichiometric materials could not be achieved due to decomposition. In this connection, partial substitution of Nb or Ta by Ti has been carried out in order to create oxygen vacancies. Tantalum was partially replaced by Ti to a significant extent in the tri-rutile structure inducing a slight increasing of conductivity. However, for the columbite case neither Nb nor Ta could be partially replaced. This behavior is quite different from that reported for other similar columbites such as MnNb₂O_6−δ, which exhibits high electrical conductivity upon substitution of niobium by titanium.     

Crystal chemistry of the (Ta6Si4O26)6− and (Ta14Si4O47)8− frameworks

The range of chemical flexibilities of the hexagonal frameworks (Ta₆Si₄O₂₆)^6? and (Ta₁₄Si₄O₄₇)^8? have been partially explored. This has been done with high-temperature preparations as in general ionic mobilities in these frameworks are too low to permit low-temperature ion exchange. Ionic site potential calculations indicate that preferential site-occupancy factors as well as geometric constraints are responsible for the absence of ionic motion. New phases K_6?xNa_xTa₆Si₄O₂₆ (x ? 4), K_8?xNa_xTa₁₄Si₄O₄₇ (x ? 5), and impure Ba_3?xNa_2xTa₆Si₄O₂₆ have been prepared. Introduction of up to 2 moles of Li⁺ and 1 mole of Mg²⁺ ions per formula unit into sites of the framework not normally occupied has been demonstrated as well as the possibility of partially substituting Zr⁴⁺ for Ta⁵⁺ ions. Substitutions designed to introduce large tunnel vacancies in the presence of only monovalent K⁺ or Na⁺ ions (P for Si, W for Ta and F for O) generally proved unsuccessful. Competitive phases also frustrated attempts to substitute either the larger Rb⁺ or the smaller Li⁺ ions into the large-tunnel sites. A large area of solid solution was discovered in the BaONa₂OTa₂O₅ phase diagram; it has a (TaO₃)-framework with the structure of tetragonal potassium tungsten bronze.     

Structural and magnetic properties of pyrochlore solid solutions (Y,Lu)2Ti2−x(Nb,Ta)xO7±y

The synthesis and characterization of the pyrochlore solid solutions, Y₂Ti_2−xNb_xO_7−y, Lu₂Ti_2−xNb_xO_7−y, Y₂Ti_2−xTa_xO_7−y and Lu₂TiTaO_7−y (−0.4<y<0.5), is described. Synthesis at 1600 °C, and 10⁻⁵ Torr yields oxygen deficiency in all systems. All compounds are found to be paramagnetic and semiconducting, with the size of the local moments being less, in some cases substantially less, than the expected value for the number of nominally unpaired electrons present. Thermogravimetric analysis (TGA) shows that all compounds can be fully oxidized while retaining the pyrochlore structure, yielding oxygen rich pyrochlores as white powders. Powder neutron diffraction of Y₂TiNbO₇-based samples was done. Refinement of the data for oxygen deficient Y₂TiNbO_6.76 indicates the presence of a distribution of oxygen over the 8b and 48f sites. Refinement of the data for oxygen rich Y₂TiNbO_7.5 shows these sites to be completely filled, with an additional half filling of the 8a site. The magnetic and TGA data strongly suggest a preference for a Ti³⁺/(Nb,Ta)⁵⁺ combination, as opposed to Ti⁴⁺/(Nb,Ta)⁴⁺, in this pyrochlore family. In addition, the evidence clearly points to Ti³⁺ as the source of the localized moments, with no evidence for localized Nb⁴⁺ moments.     

Synthesis,composition, and magnetic properties of the ferrimagnetic NdCu3−xMn4+xO12 perovskite-like phases

A magnetic oxide with composition close of NdCu₃Mn₄O₁₂ with a perovskite-related cubic structure ($\text{a ? 7.30}$ Å, space group Im3, Z = 2) has been synthesized by using either the high-pressure or the hydrothermal technique. The composition is strongly dependent on the synthesis conditions. A partial reduction of Mn⁴⁺ in the octahedral sites, resulting in a partial substitution of Cu²⁺ by Mn³⁺ in the Jahn-Teller sites, leads to the actual formula Nd(Cu²⁺_3?xMn³⁺_x)(Mn⁴⁺_3?xMn³⁺_1+x)O₁₂. For the compound synthesized at 650°C/2 kbar, the value of the substitution parameter x, as determined by neutron diffraction, is 0.32. For samples synthesized at higher temperatures, larger values of x are obtained. The compound is ferrimagnetic with Néel temperature of 390 K and a spontaneous magnetization of 93 emu/g at 4 K (52 emu/g at room temperature). For larger x values, magnetizations up to 118 emu/g at 4 K are obtained.