重质油胶体聚集结构的耗散粒子动力学模拟

重质油是以沥青质为胶核分散于饱和油分中形成的极其复杂的胶体体系.本文采用耗散粒子动力学(DPD)方法研究重质油的胶体结构及其影响因素.根据重质油各组分的分子结构特征,构建了描述重质油组分的粗粒化模型化合物.模拟结果表明,本文构建的粗粒化模型能很好地反映重质油的胶体聚集结构.沥青质分子结构对胶体聚集结构有序性有显著影响,较高稠合程度的芳香环结构将使胶束结构有较高的有序性,烷基侧链则表现出分散作用.重质油中的胶质具有胶溶作用,胶质与沥青质的浓度比存在一个极限,当小于这个极限时,重质油将出现聚沉.     

稀溶液正则系综的计算机模拟——核酸硷基腺嘌呤溶液的热力学量的蒙特卡罗计算

本文根据正则系综(T,V,N)的统计力学的蒙特卡罗方法,提出了在溶剂化过程中由于溶质分子和溶剂分子相互作用而引起正则系综中亥姆霍兹自由能(功函)A 变化的理论计算。并通过改进的分子间相互作用势,对核酸硷基腺嘌呤稀溶液进行蒙特卡罗模拟处理,求得在溶剂化过程中由于腺嘌呤分子与水分子相互作用而引起亥姆霍兹自由能(功函)、热焓、内能和构型熵的变化,以及包括溶剂分子间(水分子间)、溶质分子、溶剂分子之间相互作用总能量的正则平均。     

多氯代菲分子结构和热力学性质的密度泛函理论研究

采用密度泛函理论方法在B3LYP/6-311G(d, p)水平上对527个多氯代菲分子的几何结构进行了全优化并计算得到它们的热力学性质(等容热容( )、熵(S$)、标准生成焓(ΔfH$)和标准生成Gibbs自由能(ΔfG$)), 研究了这些性质与取代的氯原子数目和位置的关系, 根据各异构体的相对标准生成Gibbs自由能(Δr,fG$)的大小, 得到它们的热力学稳定性顺序. 计算结果表明: 绝大多数多氯代菲分子具有非平面的几何构型, 在多氯代菲分子中存在三种类型的分子内弱相互作用(H…H、C—H…Cl和Cl…Cl相互作用), 随着分子中取代的氯原子数目的增加, 多氯代菲最稳定异构体的ΔfH$和ΔfG$开始时逐渐减小, 然后又快速增加. 具有相同数目氯原子的多氯代菲异构体的ΔfH$和ΔfG$与氯原子的取代位置有很大的关系. 多氯代菲异构体的相对热力学稳定性主要由分子内的离域π键和Cl…Cl核排斥作用的强弱决定.     

饱和、不饱和(N-杂环化)低聚硅烷的结构和光谱性质

用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)对线型(饱和N-杂环化)和(苯并N-杂环化)低聚硅烷的电子结构和吸收光谱性质以及溶剂效应进行了比较研究.对各体系的基态电子结构在B3LYP/6-31G(d,p)水平上进行了全优化,讨论了电荷分布和前线分子轨道性质.在获得基态稳定构型的基础上,用B3LYP/6-311+G(d)方法计算了电子吸收光谱的性质,探讨了主链的线型增长和溶剂对电子吸收光谱的影响.结果表明,随着主链的增长,低聚硅烷的电子结构发生明显扭曲,在(苯并N-杂环化)聚硅烷中形成了邻近苯并N-杂环之间π-π堆积作用,有利于结构的稳定.两类低聚硅烷的吸收光谱都随着主链的增长而发生明显的红移,(苯并N-杂环化)聚硅烷最大吸收光谱红移幅度要比(饱和N-杂环化)聚硅烷大得多.溶剂效应使得光谱略向短波长移动,溶剂的极性改变对吸收波长的影响不明显.     

硫代甲酰胺双聚体的量子化学计算

在MP2/6 31G(d)和MP2(FC)/6 311 G(d,p)水平上,对硫代甲酰胺(HC-SNH2)及其3种构型双聚体进行几何全优化计算,经振动频率分析,确认为势能超曲面上的稳定驻点.然后在MP2/6 311 G(2df,2p)水平上进行单点能计算和基组重叠误差(BSSE)校正以获得相互作用能.并利用自然键轨道(NBO)理论和分子中的原子(AIM)理论探讨HCSNH2之间相互作用的本质.     

水及有机溶剂中离子溶剂化焓的理论计算

离子溶剂化热力学的理论研究是一项令人感兴趣的工作.在Born理论的基础上人们先后提出了多种较详细的计算离子溶剂化热力学量的模型或公式,并对离子在不同溶剂中的溶剂化自由能进行了理论计算.本文从离子-溶剂间的相互作用力出发,分别考虑了离子溶剂化过程中造腔作用、静电吸引、静电排斥及非静电相互作用对离子溶剂化焓的贡献,得到了一个具有一定意义的、计算离子溶剂化焓的理论公式。     

RbCl由H2O至混合溶剂(H2O-DMF)标准迁移熵的测定

电解质迁移热力学性质的测定,对于离子溶剂化的研究具有重要意义.迁移自由能主要反映离子与溶剂分子间的相互作用,迁移熵则主要反映不同溶剂分子间的相互作用,迁移熵随温度及溶剂组成的改变可为溶剂的原有结构推测及溶液秩序改变提供信息.我们曾运用离子选择性电极测定了部分碱金属卤化物在水及含水混合溶剂中的热力学性质[1-3].本文用离子选择性电极方法,通过测定不同温度下电池的标准电动势,根据溶液热力学原理,求得ＲｂＣｌ由Ｈ2Ｏ至混合溶剂(Ｈ2ＯＤＭＦ)的标准迁移自由能ΔＧｔ及其温度系数,计算ＲｂＣｌ的标准迁移熵ΔＳｔ.结果尚未见…     

LiCl、MgCl_2和CaCl_2乙醇溶液体系的溶剂化研究

利用红外光谱技术及量子化学方法研究了LiCl、MgCl2和CaCl2在乙醇溶液中的离子溶剂化作用现象。乙醇溶液C—O振动峰的变化及O—H伸缩振动峰发生的蓝移表明,金属离子与乙醇分子发生了相互作用。通过量子化学方法对金属离子的配合物结构进行了优化和热力学计算,并利用波恩方程理论计算出单个离子的溶剂化自由能,对比量子化学方法计算得出的吉布斯自由能,可以得到溶液中离子存在的稳定构型,验证溶液中发生了溶剂化现象。     

CO2二聚体分子弱结合作用的DFT计算

用密度泛函理论(DFT)的Becke 3LYP方法,在不同基集合（6 31G和6 311G系列）下对平行结构（C 2h）和T形结构(C2v)的CO2二聚体进行ab initio计算.通过计算,得到了CO2二聚体C2h和C2v两种构型的结构参数和离解能,并给出了CO2二聚体相对稳定构型C2h的12个正则振动分析图.结果表明,CO2二聚体的离解能为2 kJ•mol－1,CO2分子之间振动频率很小,从而说明CO2二聚体是弱结合分子.     

1,3,5-三硝基苯在高岭石表面吸附的理论研究

构造了高岭石硅氧层和铝氧层的团簇模型(分别为Si₁₃O₃₇H₂₂和Al₆O₂₄H₃₀), 并分别在B3LYP/6-31G(d), MP2/6-31G(d)//B3LYP/6-31G(d)和B3LYP/6-311++G(d,p)//B3LYP/6-31G(d)理论水平上对1,3,5-三硝基苯(TNB)在高岭石表面的吸附性质(如优化的几何构型、 结构参数、 吸附能、 振动频率、 静电势和分子轨道等)进行了研究. 结果表明, TNB和硅氧层表面间的相互作用以静电和范德华相互作用为主; TNB与铝氧层间的相互作用以氢键为主, 且TNB和铝氧层间相互作用的能量更低, 结构更稳定.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。