Anionic polymerization of methyl methacrylate with Cr(C5H7O2)3–Al(C2H5)3 catalyst system

A homogeneous catalyst system, Cr(C₅H₇O₂)₃–Al(C₂H₅)₃, was used for the polymerization of methyl methacrylate. The yield of polymer increased up to an Al/Cr ratio of 12 and thereafter remained almost constant with increasing Al/Cr. The rate of polymerization increased linearly with increasing catalyst and monomer concentrations at Al/Cr = 12. The molecular weight, however, decreased with increasing catalyst concentration and increased with increasing monomer concentration, indicating anionic polymerization reaction. NMR studies of the polymers indicated the presence of a stereoblock structure, which changed to heteroblock structure in presence of triethylamine and hydroquinone as additives in the catalyst. In the light of these observations, the mechanism of the polymerization is discussed.     

Copolymerization of 1‐hexene and ethylene catalyzed by the Ziegler catalyst Cp*TiMe3/B(C6F5)3

The Ziegler–Natta system Cp*TiMe₃/B(C₆F₅)₃ catalyzed the copolymerization of ethylene and 1‐hexene in toluene into materials that were characterized by ¹H and ¹³C{¹H} NMR spectroscopy, differential scanning calorimetry, and gel permeation chromatography. The effects of temperature and ethylene/1‐hexene and olefin/catalyst ratios on catalyst activities and copolymer molecular weights and molecular weight distributions were studied; the ethylene proportions varied from less than 5% to 85% or more. In addition, significant amounts of 1‐hexene were incorporated into the growing polymer chain in a 2,1‐fashion; consequently, conventional ¹³C NMR analytical methodologies for deducing monomer proportions and dispersions and polymer microstructures, based on a low 1,2‐incorporation of α‐olefin, did not work very well. A soluble (in toluene at ambient temperature) but very high molecular weight (weight‐average molecular weight ∼ 8 × 10⁵, weight‐average molecular weight/number‐average molecular weight = 1.8) rubbery copolymer that formed at −78 °C exhibited a predominantly alternating microstructure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3966–3976, 2000     

Stereoblock polymerization of methyl methacrylate with VOCl3?Al(C2H5)3 catalyst system

Kinetics of the polymerization of methyl methacrylate with the VOCl₃? AlEt₃ catalyst system at 40°C in n-hexane have been studied. A linear dependence of rate of polymerization on the monomer and catalyst concentrations as well as an overall activation energy of 5.87 kcal/mole were found. Characterization of the structure of the polymer by NMR spectra revealed the presence of stereoblock units. The mechanism of polymerization is discussed in relation to the kinetic data obtained.     

Ionic liquids containing the triply negatively charged tricyanomelaminate anion and a B(C6F5)3 adduct anion

Room‐temperature ionic liquids containing the triply charged tricyanomelaminate (tcmel) ion [C₃N₆(CN)₃]^3? were synthesized. The 1‐methyl‐3‐methylimidazolium (MMIm), 1‐ethyl‐3‐methylimidazolium (EMIm), and 1‐butyl‐3‐methylimidazolium (BMIm) salts of the tricyanomelaminate ion have glass transition temperatures (?6, ?20, and ?30 °C) similar to those found for the analogous monomeric dicyanoamide salts. They are thermally stable up to over 200 °C and dissolve in polar organic solvents. Addition of B(C₆F₅)₃ to M₃[tcmel] (M=Na, MMIm, EMIm, BMIm) yields salts containing the very voluminous adduct ion [C₃N₆{CN ? B(C₆F₅)₃}₃]^3? (tcmel_3B). The solid‐state structure of [MMIm]₃[tcmel] shows only long cation ??? anion contacts but in large number, while the solid‐state structure of [Na(THF)₃]₃[tcmel_3B] ? 1.76 THF displays strong interactions of the sodium cation with the amido nitrogen atoms of the anion. Hence this adduct anion cannot be regarded as a weakly coordinating anion. A similar situation is found for the MMIm salt, [MMIm]₃[tcmel_3B] ? 2.66 CH₂Cl₂, in which weak hydrogen bonds with the acidic proton of the MMIm ion are observed. On the basis of computations the energetics, structural trends, and charge transfer of adduct anion formation were studied.     

Kinetics and mechanism of polymerization yielding stereoblock poly(methyl methacrylate) with VCl4-Al(C2H5)3 catalyst system

Methyl methacrylate was polymerized at 40°C with the VCl₄–AlEt₃ catalyst system in n-hexane. The rate of polymerization was proportional to the catalyst and monomer concentration at Al/V ratio of 2, indicating a coordinate anionic mechanism of polymerization. NMR spectra were further used to confirm the mechanism of polymerization and stability of active sites responsible for isotacticity.     

Atom transfer radical polymerization of methyl methacrylate catalyzed by ion exchange resin immobilized Co(II) hybrid catalyst

Ion exchange resin immobilized Co(II) catalyst with a small amount of soluble CuCl₂/Me₆TREN catalyst was successfully applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in DMF. Using this catalyst, a high conversion of MMA (>90%) was achieved. And poly(methyl methacrylate) (PMMA) with predicted molecular weight and narrow molecular weight distribution (M_w/M_n = 1.09–1.42) was obtained. The immobilized catalyst can be easily separated from the polymerization system by simple centrifugation after polymerization, resulting in the concentration of transition metal residues in polymer product was as low as 10 ppm. Both main catalytic activity and good controllability over the polymerization were retained by the recycled catalyst without any regeneration process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1416–1426, 2008     

Stereospecific sequential block copolymerizations of styrene and 1,3‐butadiene with a C5Me5TiMe3/B(C6F5)3/Al(oct)3 catalyst

This article reports a new methodology for preparing highly stereoregular styrene (ST)/1,3‐butadiene (BD) block copolymers, composed of syndiotactic polystyrene (syn‐PS) segments chemically bonded with cis‐polybutadiene (cis‐PB) segments, through a stereospecific sequential block copolymerization of ST with BD in the presence of a C₅Me₅TiMe₃/B(C₆F₅)₃/Al(oct)₃ catalyst. The first polymerization step, conducted in toluene at ?25 °C, was attributed to the syndiospecific living polymerization of ST. The second step, conducted at ?40 °C, was attributed to the cis‐specific living polymerization of BD. The livingness of the whole polymerization system was confirmed through a linear increase in the weight‐average molecular weights of the copolymers versus the polymer yields in both steps, whereas the molar mass distributions remained constant. The profound cross reactivity of the styrenic‐end‐group active species with BD toward ST led to the production of syn‐PS‐b‐cis‐PB copolymers with extremely high block efficiencies. Because of the presence of crystallizable syn‐PS segments, this copolymer exhibited high melting temperatures (up to 270 °C), which were remarkably different from those of the corresponding anionic ST–BD copolymers, for which no melting temperatures were observed. Scanning electron microscopy pictures of a binary syn‐PS/cis‐PB blend with or without the addition of the syn‐PS‐b‐cis‐PB copolymers proved that it could be used as an effective compatibilizer for noncompatibilized syn‐PS/cis‐PB binary blends. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1188–1195, 2005     

B(C6F5)3-catalyzed synthesis of benzylic azides

B(C₆F₅)₃ was found to catalyze the reaction between trimethylsilyl azide and benzylic acetates. Secondary and tertiary benzylic acetates were competent substrates in this reaction providing the azide products in moderate to high yields. Mechanistic experiments are consistent with the possible formation of a Lewis acid-base pair between the B(C₆F₅)₃ and trimethylsilyl azide.     

Adducts of (C6F5)3B with Selected Nitrogen

The Lewis acid (C₆F₅)₃B was reacted with ICN, NH₂CN, C₃N₃X₃ (X = H, Cl, F). The resulting Lewis acid base adducts ( 1—5 ) were fully characterized by analytic and spectroscopic methods. Additionally, the structures of the adducts 1—4 were determined by single crystal X‐ray analyses. It has been qualitatively shown, that a high field shift of the ¹¹B as well as the ¹⁹F NMR resonances of the o‐F atoms of the C₆F₅‐substituents suggests a longer B—N distance.     

B(C6F5)3-Catalyzed Cascade Reduction of Pyridines

B(C₆F₅)₃ has been found to be an effective catalyst for reduction of pyridines and other electron-deficient N-heteroarenes with hydrosilanes (or hydroboranes) and amines as the reducing reagents. The success of this development hinges upon the realization of a cascade process of dearomative hydrosilylation (or hydroboration) and transfer hydrogenation. The broad functional-group tolerance (e.g. ketone, ester, unactivated olefins, nitro, nitrile, heterocycles, etc.) implies high practical utility.     

B(C6F5)3-Catalyzed E-Selective Isomerization of Alkenes

Herein, we report the B(C₆F₅)₃-catalyzed E-selective isomerization of alkenes. The transition-metal-free method is applicable across a diverse array of readily accessible substrates, giving access to a broad range of synthetically useful products containing versatile stereodefined internal alkenes. The reaction mechanism was investigated by using synthetic and computational methods.     

Supported nickel bromide catalyst for atom transfer radical polymerization (ATRP) of methyl methacrylate

A new supported catalytic system, i.e. nickel bromide catalyst ligated by triphenylphosphine (TPP) ligands immobilized onto crosslinked polystyrene resins (PS-TPP) is reported. Per se, this catalyst does not allow any control over the polymerization of methyl methacrylate (MMA) initiated by ethyl 2-bromoisobutyrate but, in the presence of a given amount of purposely added free TPP, it promotes controlled ATRP of MMA. Indeed colorless PMMA chains of low polydispersity indices are readily recovered, the molecular weight of which linearly increases with monomer conversion and agrees with the expected values. Recycling of the supported catalyst is evidenced and does not prevent the polymerization from being controlled.     

B(C6F5)3 catalyzed synthesis of dihydropyrano[3,2-b]chromenediones under solvent-free conditions

Abstract

A simple, efficient, solventless, and one step, B(C₆F₅)₃ catalyzed, synthesis of dihydropyrano[3,2-b]chromenediones from dimedone, aldehyde and kojic acid is described. This protocol proceeds smoothly, accommodates aromatic as well as heteroaromatic aldehydes and gives dihydropyrano[3,2-b]chromenediones in excellent yield.     

The effect of AlR3 on propylene polymerization by rac‐(EBI)Zr(NMe2)2/AlR3/[CPh3][B(C6F5)4] catalyst

Ansa‐zirconocene diamide complex rac‐(EBI)Zr(NMe₂)₂ [rac‐1, EBI = ethylene‐1,2‐bis(1‐indenyl)] reacted with AlR₃ (R = Me, Et, iBu) or Al(iBu₂)H and then with [CPh₃][B(C₆F₅)₄] (2) in toluene in order to perform propylene polymerization by cationic alkylzirconium species, which are in situ generated during polymerization. Through the sequential NMR‐scale reactions of rac‐1 with AlR₃ or Al(iBu₂)H and then with 2, rac‐1 was demonstrated to be transformed to the active alkyzirconium cations via alkylated intermediates of rac‐1. The cationic species generated by using AlMe₃, AlEt₃, and Al(iBu₂)H as alkylating reagents tend to become heterodinuclear complex; however, those by using bulky Al(iBu)₃ become base‐free [rac‐(EBI)Zr(iBu)]⁺ cations. The activity of propylene polymerization by rac‐1/AlR₃/2 catalyst was deeply influenced by various parameters such as the amount and the type of AlR₃, metallocene concentration, [Al]/[2] ratio, and polymerization temperature. Generally the catalytic systems using bulky alkylaluminum like Al(iBu)₃ and Al(iBu)₂H show higher activity but lower stereoregularity than those using less bulky AlMe₃ and AlEt₃. The alkylating reagent Al(iBu)₃ is not a transfer agent as good as AlMe₃ or AlEt₃. The polymerization activities show maximum around [Al]/[2] ratio of 1.0 and increase monotonously with polymerization temperature. The overall activation energy of both rac‐1/Al(iBu)₃/2 and rac‐1/Al(iBu)₂H catalysts is 6.0 kcal/mol. As the polymerization temperature increases, the stereoregularity of the resulting polymer decreases markedly, which is demonstrated by the decrease of [mmmm] pentad value and by the increase of the amount of polymer soluble in low boiling solvent. The physical properties of polymers produced in this study were investigated by using ¹³C‐NMR, differential scanning calorimetry (DSC), viscometry, and gel permeation chromatography (GPC). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1523–1539, 1999     

One-pot B(C6F5)3 catalyzed cascade synthesis of 2-substituted-2,3-dihydroquinazolin-4(1H)-ones

Abstract

A new and efficient B(C₆F₅)₃ catalyzed domino strategy has been developed for the synthesis of 2-substituted quinazolinones. The reaction utilizes 2-aminobenzamide and aldehydes for a one-pot protocol. A wide range of substrate scope, functional group tolerance, and operational simplicity with excellent yield are synthetically useful features.     

Preparation of a nitrate-coordinated copper(II) complex of 2-(pyrazol-3-yl)-6-(pyrazolate)pyridine as an efficient catalyst for methyl methacrylate polymerization

Treatment of [CuCl(2)(bppyH(2))] (1, bppyH(2) = 2,6-di(1H-pyrazol-3-yl)pyridine) with 2 equiv. of AgNO(3) in DMF gave rise to a binuclear Cu(II) complex [Cu(2)(bppyH)(2)(NO(3))(2)] (bppyH = 2-(pyrazol-3-yl)-6-(pyrazolate)pyridine) (2). Complex 2 was characterized by elemental analysis, IR and single crystal X-ray diffraction. Complex 2 has a dimeric structure in which the two Cu(ii) centers are bridged by a couple of the in situ-generated bppyH(-) anions. Each Cu(II) center is further coordinated by one O atom of a NO(3)(-) anion and three N atoms of one bppyH(-) anion. Complex 2 exhibited a higher catalytic activity in the polymerization of methyl methacrylate (MMA) than the precursor complex 1. Even though the ratio of catalyst to MMA was raised up to 1 : 1500, the PDI for 2 (reaction time was fixed at 4 h) is 1.63 and the conversion is up to 72%. The effects of solvent, reaction temperature and the ratio of MMA to catalyst were also investigated.     

B(C6F5)3 adducts of transition metal acyl compounds

The transition metal acyl compounds [Co(L)(CO)3(COMe)] (L = PMe3, PPhMe2, P(4-Me-C6H4)3, PPh3 and P(4-F-C6H4)3), [Mn(CO)5(COMe)] and [Mo(PPh3)(eta(5)-C5H5)(CO)2(COMe)] react with B(C6F5)3 to form the adducts [Co(L)(CO)3(C{OB(C6F5)3}Me)] (L = PMe3, 1, PPhMe2, 2, P(4-Me-C6H4)3, 3, PPh3, 4, P(4-F-C6H4)3), 5, [Mn(CO)5(C{OB(C6F5)3}Me)] 6 and [Mo(eta(5)-C5H5)(PPh3)(CO)2(C{OB(C6F5)3}Me)], 7. Addition of B(C6F5)3 to a cooled solution of [Mo(eta(5)-C5H5)(CO)3(Me)], under an atmosphere of CO gave [Mo(eta(5)-C5H5)(CO)3(C{OB(C6F5)3}Me)] 8. In the presence of adventitious water, the compound [Co{HOB(C6F5)3}2{OP(4-F-C6H4)3}2] 9, was formed from [Co(P(4-F-C6H4)3)(CO)3(C{OB(C6F5)3}Me)]. The compounds 4 and 9 have been structurally characterised. The use of B(C6F5)3 as a catalyst for the CO-induced migratory-insertion reaction in the transition metal alkyl compounds [Co(PPh3)(CO)3(Me)], [Mn(CO)5(Me)], [Mo(eta(5)-C5H5)(CO)3(Me)] and [Fe(eta(5)-C5H5)(CO)2(Me)] has been investigated.     

B(C6F5)3-Enabled Synthesis of a Cyclic cis-Arsaphosphene

The synthesis and characterization of an (arsino)phosphaketene, As(PCO){[N(Dipp)](CH₂)}₂ (Dipp=2,6-diisopropylphenyl) is reported along with its subsequent reactivity with B(C₆F₅)₃. When reacted in a stoichiometric ratio, B(C₆F₅)₃ drove the insertion of the P=C bond of the phosphaketene into one of the As−N bonds of the arsino functionality, affording an acid-stabilized, seven-membered, cyclic arsaphosphene. In contrast, when catalytic amounts of B(C₆F₅)₃ were employed, dimeric species, which formed through a formal [2+2] cycloaddition of the cyclic arsaphosphene, were generated. The cyclic arsaphosphene product represents the first example of such a compound in which the two substituents are arranged in a cis-configuration.     

Interaction of Metal Oxido Compounds with B(C6F5)3

Lewis acid–base pair chemistry has been placed on a new level with the discovery that adduct formation between an electron donor (Lewis base) and acceptor (Lewis acid) can be inhibited by the introduction of steric demand, thus preserving the reactivity of both Lewis centers, resulting in highly unusual chemistry. Some of these highly versatile frustrated Lewis pairs (FLP) are capable of splitting a variety of small molecules, such as dihydrogen, in a heterolytic and even catalytic manner. This is in sharp contrast to classical reactions where the inert substrate must be activated by a metal-based catalyst. Very recently, research has emerged combining the two concepts, namely the formation of FLPs in which a metal compound represents the Lewis base, allowing for novel chemistry by using the heterolytic splitting power of both together with the redox reactivity of the metal. Such reactivity is not restricted to the metal center itself being a Lewis acid or base, also ancillary ligands can be used as part of the Lewis pair, still with the benefit of the redox-active metal center nearby. This Minireview is designed to highlight the novel reactions arising from the combination of metal oxido transition-metal or rare-earth-metal compounds with the Lewis acid B(C₆F₅)₃. It covers a wide area of chemistry including small molecule activation, hydrogenation and hydrosilylation catalysis, and olefin metathesis, substantiating the broad influence of the novel concept. Future goals of this young and exciting area are briefly discussed.