Impedance of the SnO<Subscript>2</Subscript>|liquid crystal ZhK-440|SnO<Subscript>2</Subscript> system

The SnO₂|ZhK-440|SnO₂ system, where the ZhK-440 is a liquid crystal mixture consisting of 2/3 parts of p-butyl-p'-methyloxyazoxybenzene and 1/3 part of p-butyl-p'-heptanoyloxyazoxybenzene, was studied by impedance spectroscopy. The impedance spectrum of the system contained the contributions from electric conductivity and bulk and electrode polarizations. The models of bulk and electrode impedance were discussed.     

Comparing the electrochemical properties of pure phase Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript> and composite Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript>/C

Compound Zn₂SnO₄ was synthesized by a hydrothermal method in which SnCl₄ · 5H₂O, ZnCl₂ and N₂H₄ · H₂O were used as reactants. Composite Zn₂SnO₄/C was then synthesized through a carbothermic reduction process using the as-prepared Zn₂SnO₄ and glucose as reactants. Comparing to the pure Zn₂SnO₄, some improved electrochemical properties were obtained for composite Zn₂SnO₄/C. When doped with 15% glucose, the composite Zn₂SnO₄/C showed the best electrochemical performance. Its first discharge capacity was about 1500 mA h g⁻¹, with a capacity retain of 500 mA h g⁻¹ in the 40th cycle at a constant current density of 100 mA/g in the voltage range of 0.05–3.0 V. There were also some differences displayed in their cyclic voltammogram.     

Conductivity of SnO<Subscript>2</Subscript>-In<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocrystalline composite films

The conductivity of films consisting of a mixture of SnO₂ and In₂O₃ nanocrystals at 200–500°C was studied. Based on the experimental data, it was assumed that in films containing less than 20 wt % In₂O₃, the current flows along SnO₂ nanocrystals. A model of conductivity in these films is presented; it includes an electron transfer from In₂O₃ to SnO₂, which forms positively charged In₂O₃ nanocrystals that contact the negatively charged SnO₂ nanocrystals. In the presence of In₂O₃ nanocrystals, the activation energy of the electron transfer between SnO₂ nanocrystals decreased substantially because of a decrease in the barrier of electron transfer between SnO₂ crystals under the action of the negative charge. As a result, a percolation cluster of charged SnO₂ crystals formed. At high contents of In₂O₃ (over 20 wt %), the conductivity increased dramatically. The curve of the temperature dependence of conductivity changed because of the appearance of a percolation cluster of In₂O₃ nanocrystals, in which the current passed. The conductivity of a mixed film of this kind differed from that of the nanocrystalline film of pure In₂O₃.     

Synthesis and study of solid acid materials SnO<Subscript>2</Subscript>/B<Subscript>2</Subscript>O<Subscript>3</Subscript>

SnO₂/B₂O₃ samples were produced by a reaction between SnCl₄, H₃BO₃, and (NH₂)₂CO in a boiling aqueous solution. The Sn: B molar ratio in these samples was 1: 1, 1: 2, and 1: 3. The phase composition and degree of crystallinity of these materials was studied. The surface acidity of the samples was analyzed by the method based on a temperature-programmed reaction of dehydration of 2-methyl-3-butyn-2-ol. Thermal transformations of SnO₂/B₂O₃ samples were examined by means of differential-thermal analysis.     

Catalytic properties of SnO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> compositions in total methane oxidation

Tin and titanium dioxides and their compositions were studied as catalysts for the reaction of complete oxidation of methane. The catalytic activity of the test samples was compared in terms of first-order reaction rate constants with reference to the unit surface area of a catalyst. The crystal structures and specific surface areas of the obtained compositions were characterized. The thermal stability of SnO₂ was investigated. Data on the temperature-programmed reduction of SnO₂ and the composition Sn_0.70Ti_0.30O₂ in hydrogen were given.     

Concurrent synthesis of SnO/SnO<Subscript>2</Subscript> nanocomposites and their enhanced photocatalytic activity

The SnO/SnO₂ nanocomposites were synthesized using semisolvothermal reaction technique. These nanocomposites were prepared using different combination of solvents viz., ethanol, water, and ethylene glycol at 180 °C for 24 h. The synthesized nanocomposites were analyzed with various characterization techniques. Structural analysis indicates the formation of tetragonal phase of SnO₂ for the sample prepared in ethanol, whereas for other solvent combinations, the mixture of SnO and SnO₂ having tetragonal crystal structures were observed. The optical study shows enhanced absorbance in the visible region for all the prepared SnO/SnO₂ nanocomposites. The observed band gap was found to be in the range of 3.0 to 3.25 eV. Microstructural determinations confirm the formation of nanostructures having spherical as well as rod-like morphology. The size of nanoparticles in ethanol-mediated solvent was found to be in the range of 5 to 7 nm. Thermogravimetric analysis indicate the weight gain around 1.3 wt% confirming the conversion of SnO to SnO₂ material. The photocatalytic activity of synthesized nanocomposites was evaluated by following the aqueous methylene blue (MB) degradation. The sample prepared in ethylene glycol-mediated solvent showed highest photoactivity having apparent rate constant (K_app) 0.62 × 10^?2 min^?1.     

Carbon ceramic electrodes modified with mixed oxides SiO<Subscript>2</Subscript>/SnO<Subscript>2</Subscript> for determination of levofloxacin

The preparation of a carbon ceramic electrode modified with SnO₂ (CCE/SnO₂) using tin dibutyl diacetate as precursor was optimized by a 2³ factorial design. The factors analyzed were catalyst (HCl), graphite/organic precursor ratio, and inorganic precursor (dibutyltin diacetate). The statistical treatment of the data showed that only the second-order interaction effect, catalyst × inorganic precursor, was significant at 95% confidence level, for the electrochemical response of the system. The obtained material was characterized by scanning electron microscopy (MEV), X-ray diffraction (XRD), RAMAN spectroscopy, XPS spectra, and voltammetric techniques. From the XPS spectra, it was confirmed the formation of the Si–O–Sn bond by the shift in the binding energy values referred to Sn 3d3/2 due to the interaction of Sn with SiOH species. The incorporation of SnO₂ provided an increment of the electrode response for levofloxacin, with Ipa = 147.0 μA for the ECC and Ipa = 228.8 μA for ECC/SnO₂, indicating that SnO₂ when incorporated into the silica network enhances the electron transfer process. Under the optimized working conditions, the peak current increased linearly with the levofloxacin concentration in the range from 6.21×10^?5 to 6.97×10^?4 mol L^?1 with quantification and detection limits of 3.80×10^?5 mol L^?1 (14.07 mg L^?1) and 1.13×10^?5 mol L^?1 (4.18 mg L^?1), respectively.     

Thermal and structural investigation of SnO<Subscript>2</Subscript>/Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> obtained by the polymeric precursor method

SnO₂-based materials are used as sensors, catalysts and in electro–optical devices. This work aims to synthesize and characterize the SnO₂/Sb₂O₃-based inorganic pigments, obtained by the polymeric precursor method, also known as Pechini method (based on the metallic citrate polymerization by means of ethylene glycol). The precursors were characterized by thermogravimetry (TG) and differential thermal analysis (DTA). After characterization, the precursors were heat-treated at different temperatures and characterized by X-ray diffraction. According to the TG/DTA curves basically two-step mass loss process was observed: the first one is related to the dehydration of the system; and the second one is representative to the combustion of the organic matter. Increase of the heat treatment temperature from 500 to 600°C and 700°C resulted higher crystallinity of the formed product.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Preparation and performance of potassium-based sorbent using SnO<Subscript>2</Subscript> for post-combustion CO<Subscript>2</Subscript> capture

Potassium-based sorbents using γ-Al₂O₃ or TiO₂ as a support or an additive material have disadvantages in terms of their thermal stability and cyclic CO₂ capture. To overcome the shortcomings of these sorbents, a novel potassium-based sorbent (KSnI30) using SnO₂ was developed in this study. The KSnI30 sorbent formed only K₂CO₃ and SnO₂ phases without any inactive alloy species even after calcination at high temperatures (500–700 °C), indicating the good thermal stability of the KSnI30 sorbent regardless of the calcination temperature. Furthermore, the KSnI30 sorbent has an excellent regeneration property (above 98 %), as well as high CO₂ capture capacities (89–94 mg CO₂/g sorbent). Its excellent regeneration property is due to the formation of a KHCO₃ phase without by-products during CO₂ sorption. These results of the present study demonstrate that the SnO₂ shows promise as a new support or an additive material to replace TiO₂ and γ-Al₂O₃ in the preparation of a regenerable potassium-based sorbent for post-combustion CO₂ capture with good thermal stability and excellent regeneration property.     

Photoelectrochemical study of electrodeposited TiO<Subscript>2</Subscript> thin films onto F:SnO<Subscript>2</Subscript> substrates

TiO₂ thin films have been effectively fused onto F:SnO₂ (FTO) substrates via the electrodeposition method. The influence of deposition temperature on the synthesis of F:SnO₂ substrates and relative information of as-deposited and annealed TiO₂ thin films have been studied. Novel TiO₂ microspheres are detected on F:SnO₂ substrates at an optimized electrodeposition potential. Raman bands approve the creation of single-anatase-phase TiO₂. The optimized deposition surroundings show a decrease in the band gap of F:SnO₂ substrates and TiO₂ thin films. The determined photoelectrochemical properties of annealed TiO₂ thin films indicate a fill factor of 51% and power conversion efficiency of 0.15% for application in solar cells.     

Synthesis of BaSnO<Subscript>3</Subscript>/SnO<Subscript>2</Subscript> Nanocomposites as Heterogeneous Additive for Composite Solid Electrolytes

Method of differential thermal analysis was used to study the thermolysis of a mixture of barium oxalate hydrate and α-SnO₂·H₂O, produced by precipitation from hydrochloric solutions. The methods of X-ray diffraction analysis, electron microscopy, and low-temperature nitrogen adsorption were used to examine the reaction products formed at various heating temperatures and determine their phase composition. The nanocomposite BaSnO₃/SnO₂ is the final product of thermolysis and subsequent heating to 950°C. The nanocomposite was used as a heterogeneous oxide additive for obtaining a CsNO₂–BaSnO₃/SnO₂ composite solid electrolyte. The conductivity of the composite exceeds that of the starting salt by more than order of magnitude.     

Selective electroreduction of carbon dioxide to formic acid on electrodeposited SnO<Subscript>2</Subscript>@N-doped porous carbon catalysts

Electrocatalytic reduction of CO₂ is a promising route for energy storage and utilization. Herein we synthesized SnO₂ nanosheets and supported them on N-doped porous carbon (N-PC) by electrodeposition for the first time. The SnO₂ and N-PC in the SnO₂@N-PC composites had exellent synergistic effect for electrocatalytic reduction of CO₂ to HCOOH. The Faradaic efficiency of HCOOH could be as high as 94.1% with a current density of 28.4 mA cm^?2 in ionic liquid-MeCN system. The reaction mechanism was proposed on the basis of some control experiments. This work opens a new way to prepare composite electrode for electrochemical reduction of CO₂.     

Thermal synthesis of the CeO<Subscript>2</Subscript>-PrO<Subscript>2</Subscript>-Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>pigments

Summary The synthesis of new compounds based on the CeO₂-PrO₂-Nd₂O₃system, which can be used as pigments for colouring of ceramic glazes, is investigated in our laboratory. The optimum conditions for the syntheses of these compounds have been estimated. The methods of thermal analysis provided first information about the temperature region of the formation of the pigments investigated. The synthesis of these compounds was followed by thermal analysis using STA 449/C Jupiter (Netzsch, Germany).     

Synthesis and colour properties of pigments based on terbium-dopped Mg<Subscript>2</Subscript>SnO<Subscript>4</Subscript>

The main aim of this work was to synthesize the magnesium orthostannate doped by terbium cations and tested whether these materials can be used for colouring of the different materials, e.g. organic binder and ceramic glazes. Initial composition of pigments was counted according the general formula 2MgO(1 − x)SnO₂–xTbO₂, where values of x varied from 0.1 to 0.5 in 0.1 steps. The simultaneous TG/DTA measurements of mixture containing tin oxide, magnesium carbonate hydroxide and terbium oxide showed that the formation of a new compound started at temperature 1,029 °C, but single-phase system was not prepared. Granulometric compositions of samples that were prepared by calcining at temperatures 1,300–1,400 °C are characterized by values of median (d ₅₀) in range 4–8 μm. The calcining temperature 1,500 °C caused the increase of the particle sizes at around 12 μm. The composition of sample 2MgO–1.5SnO₂–0.5TbO₂ and heating temperature 1,500 °C are the most suitable conditions for preparation of colourfully interesting pigment that can be recommended also for colouring of ceramic glazes. Especially, for colouring of decorative lead containing glaze G 07091 containing 5 wt% of PbO and 8 wt% of Al₂O₃.     

Sensors based on SnO<Subscript>2</Subscript> + In<Subscript>2</Subscript>O<Subscript>3</Subscript> composite films for detecting CO in air

The sensor properties of nanostructured films of SnO₂, In₂O₃, and their combinations for detecting CO in air in the temperature range of 330–520°C were investigated. It was found that SnO₂ films show the least sensitivity to CO. Sensitivity grows as the concentration of In₂O₃ in SnO₂ increases, and it reaches its maximum value in pure In₂O₃. At the same time, the maximum of sensitivity to CO in air shifts towards low temperatures. Sensor response time was found to be about 1 s for the studied SnO₂ and In₂O₃ films, and about 0.5 s for the composite film. The mechanism of sensor sensitivity for the studied metal oxide films in detecting CO in air is discussed.     

The effect of platinum on the SnO<Subscript>2</Subscript> sorption properties

Chemisorption of SO₂ and O₂ at Pt-modified SnO₂ is studied by using the vacuum static method, with simultaneous recording of electrical conductivity, over the 22 to 300°C temperature range. The SnO₂ surface modification results in the increasing of SO₂ adsorption and weakening of the gas-surface bonding. The chemisorption enhances the samples’ electrical conductivity. The surface pretreatment with oxygen leads to the decreasing of the successive SO₂ chemisorption.     

Anodic oxidation of pentachlorophenol at Ti/SnO<Subscript>2</Subscript> electrodes

The electrochemical oxidation of dilute aqueous solutions of pentachlorophenol (PCP) using Ti/SnO₂ as an electrocatalytic material has been investigated. The studies were carried out in a two-compartment electrochemical cell at three different current density values (10, 30 and 50 mA cm^–2) at 25 °C and using 20 mg L^–1 of PCP in 0.1 M NaOH (pH 10) as supporting electrolyte. The PCP concentration and the by-products of the oxidized solution were monitored during the oxidation process using UV and HPLC techniques. For the three current densities investigated it was found that the rate of PCP elimination depends only on the specific electrical charge. Likewise, the oxidation mechanism was proved to occur through the participation of adsorbed hydroxyl radicals (·OH) formed on the SnO₂ surface, whatever the current density used. However, as the applied current density was increased, a current efficiency lower than 2% was obtained, which is due to mass transfer limitations. In addition, it was observed that the PCP was mineralized to CO₂ with conversion percentages as high as 92% and at current density values as low as 10 mA cm^–2. The PCP degradation produces two other by-products of oxidation (<10%), namely carboxylic acids, which are non-toxic compounds. Electronic Publication     

Ab initio parametrized polarizable force field for rutile-type SnO<Subscript>2</Subscript>

We report a new, polarizable classical force field for the rutile-type phase of SnO₂, casserite. This force field has been parametrized using results from ab initio (density functional theory) calculations as a basis for fitting. The force field was found to provide structural, dynamical and thermodynamic properties of tin oxide that compare well with both ab initio and experimental results at ambient and high pressures.