Modeling of Osmotic Pressure of Aqueous Poly(Ethylene Glycol) Solutions Using the Artificial Neural Network and Free Volume Flory Huggins Model

In this work, the modified Flory-Huggins coupled with the free-volume concept and the artificial neural network models were used to obtain the osmotic pressure of aqueous poly(ethylene glycol) solutions. In the artificial neural network, the osmotic pressure of aqueous poly(ethylene glycol) solutions depends on temperature, molecular weight and the mole fractions of poly(ethylene glycol) in aqueous solution. The network topology is optimized and the (3-1-1) architecture is found using optimization of an objective function with batch back propagation (BBP) method for 134 experimental data points. The results obtained from the neural network in obtaining of the osmotic pressure of aqueous poly(ethylene glycol) were compared with those obtained from the free volume Flory-Huggins model (FV-FH). The results showed that the modified Flory-Huggins model and also the artificial neural network can accurately predict the osmotic pressure of aqueous poly(ethylene glycol) solutions but the accuracy of ANN is much better than the modified Flory-Huggins model.     

聚乙二醇-聚乳酸共聚物药物载体

本文综述了聚乙二醇与聚乳酸共聚亲水改性的最新进展, 包括嵌段和星型结构聚乙二醇-聚乳酸共聚物(PEG-PLA)及其端基化衍生物的合成。同时概述了该共聚物以胶束、微粒、水凝胶和囊泡形式担载亲水、疏水及蛋白质类药物的应用,特别介绍了静电纺丝制备的PEG-PLA超细纤维载体及其释药特性。     

两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征

开环聚合;生物降解共聚物;两亲型聚L-亮氨酸-聚乙二醇单甲醚嵌段共聚物的合成与表征     

Linear Poly(methyl glycerol) and Linear Polyglycerol as Potent Protein and Cell Resistant Alternatives to Poly(ethylene glycol)

The nonspecific interaction of proteins with surfaces in contact with biofluids leads to adverse problems and is prevented by a biocompatible surface coating. The current benchmark material among such coatings is poly(ethylene glycol) (PEG). Herein, we report on the synthesis of linear polyglycerol derivatives as promising alternatives to PEG. Therefore, gold surfaces as a model system are functionalized with a self‐assembled monolayer (SAM) by a two‐step anhydride coupling and a direct thiol immobilization of linear poly(methyl glycerol) and polyglycerol. Surface plasmon resonance (SPR) spectroscopy reveals both types of functionalized surfaces to be as resistant as PEG towards the adsorption of the test proteins fibrinogen, pepsin, albumin, and lysozyme. Moreover, linear polyglycerols adsorb even less proteins from human plasma than a PEG‐modified surface. Additional cell adhesion experiments on linear poly(methyl glycerol) and polyglycerol‐modified surfaces show comparable cell resistance as for a PEG‐modified surface. Also, in the case of long‐term stability, high cell resistance is observed for all samples in medium. Additional in vitro cell‐toxicity tests add to the argument that linear poly(methyl glycerol) and polyglycerol are strong candidates for promising alternatives to PEG, which can easily be modified for biocompatible functionalization of other surfaces.     

Synthesis and Characterization of Poly(Lactic Acid) – Poly(Ethylene Glycol) Copolymer with Boc-Glycine End Groups in Medical Applications

Chemistry of Natural Compounds - Poly(lactic acid)-poly(ethylene glycol) with Boc-glycine linked copolymer was synthesized from lactic acid, poly(ethylene glycol), and Boc-glycine. The synthesized...     

Protein and Dye Adsorption on Poly(ethylene terephthalate) Nucleopore Membranes Modified with Polymers

Adsorption of basic, neutral, and acidic proteins on poly(ethylene terephthalate) nucleopore membranes was studied as a function of solution pH. Higher adsorption values were observed for basic and neutral proteins and lower, for acidic proteins. The value of pH corresponding to maximal adsorption was somewhat lower than the isoelectric points of proteins, thus suggesting that the adsorption was governed by a combination of ionic and hydrophobic interactions between proteins and the membrane surface. Proteins were adsorbed in an associated form. Membrane surface was modified with poly(ethylene imine) and poly(ethylene glycol). Combined modification of the membranes with these polymers was found to substantially decrease the adsorption of basic and neutral proteins, as well as basic dye and to slightly increase the adsorption of acidic proteins. The modifying coating had a high hydrolytic stability.     

聚酯废料乙二醇解聚反应的研究

在选定的条件下,使聚酯废料乙二醇解聚,反应产物中BHET含量高,易精制,对乙二醇醚化反应也有所抑制。BHET缩聚后得到的聚酯的各顷指标达到了纺丝要求,可纺性能良好。     

Novel antifouling oligo(ethylene glycol) methacrylate particles via surfactant-free emulsion polymerization

The use of particle formulations with antifouling surface properties attracts increasing interest in several biotechnological applications. Majority of these studies utilize a poly(ethylene glycol) coating to render the corresponding surface nonrecognizable to biological macromolecules. Herein, we report a simple way to prepare novel antifouling colloids composed of oligo(ethylene glycol) backbones via surfactant-free emulsion polymerization. Monodisperse cross-linked poly(ethylene glycol) ethyl ether methacrylate particles were characterized by dynamic light scattering and transmission electron microscopy. The effects of monomer, cross-linker and initiator on particle characteristics were investigated. More importantly, a prominent blockage of bovine serum albumin adsorption was obtained for the poly(ethylene glycol)-based sub-micron (~200 nm) particles when compared with similar-sized poly(methyl methacrylate) counterparts.     

Poly(hydroxyethyl methacrylate)‐based composite cryogel with embedded macroporous cellulose beads for the separation of human serum immunoglobulin and albumin

A novel super‐macroporous monolithic composite cryogel was prepared by embedding macroporous cellulose beads into poly(hydroxyethyl methacrylate) cryogel. The cellulose beads were fabricated by using a microchannel liquid‐flow focusing and cryopolymerization method, while the composite cryogel was prepared by cryogenic radical polymerization of the hydroxyethyl methacrylate monomer with poly(ethylene glycol) diacrylate as cross‐linker together with the cellulose beads. After graft polymerization with (vinylbenzyl)trimethylammonium chloride, the composite cryogel was applied to separate immunoglobulin‐G and albumin from human serum. Immunoglobulin‐G with a mean purity of 83.2% and albumin with a purity of 98% were obtained, indicating the composite cryogel as a promising chromatographic medium in bioseparation for the isolation of important bioactive proteins like immunoglobulins and albumins.     

PEG‐Modified Macroporous Poly(Glycidyl Methacrylate) and Poly(2‐Hydroxyethyl Methacrylate) Microspheres to Reduce Non‐Specific Protein Adsorption

To minimize non‐specific protein adsorption on macroporous poly(glycidyl methacrylate) and poly(2‐hydroxyethyl methacrylate) microspheres containing amino and/or carboxyl groups, the microspheres are coated with α,ω‐bis‐carboxy poly(ethylene glycol) and amino‐terminated poly(ethylene glycol‐co‐propylene glycol) or α‐methoxy‐ω‐amino poly(ethylene glycol). Adsorption of bovine serum albumin (BSA), γ‐globulin, ¹²⁵I‐BSA, pepsin, and chymotrypsin on neat and PEGylated microspheres is determined by UV–VIS spectroscopy of supernatants and eluates or by measurement of radioactivity in an ionization chamber. Neat and PEGylated microspheres adsorb 0.8–70% and 0.02–44% of protein, respectively.

     

Gas Chromatographic Analysis in the Synthesis of Poly (Ethylene Oxide) Dimethyl Ethers

ABSTRACT

Gas chromatography (GC) was used in the analysis of the synthesized oligomeric mixtures, involving poly(ethylene glycol)s, poly(ethylene oxide) monomethyl ethers, poly(ethylene oxide) dimethyl ethers and crown ethers. It was demonstrated that the samples could be successfully analyzed on the wide bore capillary column with cross-linked polar stationary phase (FFAP) without derivatization. An on-column injection technique is used to avoid possible sample distortion. Identification and quantitative analysis were achieved taking advantage of the GC homologues retention rule and the FID effective carbon number response rule, thus the limitations of some standard availability and purity problems were avoided. Much useful information such as average molecular weight, polydisperse distribution and so on were obtained by the established method, which is very important in the process monitoring and product quality control.     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

Enhanced separation of albumin-poly(ethylene glycol) by combination of ultrafiltration and electrophoresis

Separation of bovine serum albumin (BSA) from poly(ethylene glycol) (PEG) through ultrafiltration membranes has been investigated. Concentration polarization by BSA represents a strong limitation to the transmission of PEG through a porous membrane. The application of an electric field normal to the membrane can help to reduce BSA concentration polarization and to enhance PEG transmission, both in ultrafiltration and in diafiltration mode. A range of solution compositions of BSA and PEG has been investigated. The contribution of electrokinetic phenomena is measured by specific experiments.     

The stability of semi-interpenetrating polymer networks based on sulfonated polyimide and poly(ethylene glycol) diacrylate for fuel cell applications

A series of the semi-interpenetrating polymer network (semi-IPN) membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate were prepared and characterized comparing with pure sulfonated polyimide membrane and commercially available membrane, Nafion^® 117. The proton conductivity increased with the increase of poly(ethylene glycol) diacrylate contents in spite of the decrease in ion exchange capacity which is a key factor to improve the proton conductivity. The water stability of semi-IPN membranes containing poly(ethylene glycol) diacrylate is higher than the pure sulfonated polyimide membrane. Morphological structure showed that amorphous nature of the films also increased with the poly(ethylene glycol) diacrylate contents, which could make a crosslink, so that the crystallinity of polyimide could disappear. Semi-IPN membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate, which show good conductivity comparable to Nafion^® 117 in the range of 20-50% content of poly(ethylene glycol) diacrylate, could be promising proton conducting membranes in fuel cell application.     

Biofouling-resistance expanded poly(tetrafluoroethylene) membrane with a hydrogel-like layer of surface-immobilized poly(ethylene glycol) methacrylate for human plasma protein repulsions

In general, it is a challenge to control the highly polar material grafting from the chemically inert Teflon-based membrane surface. This work describes the surface modification and characterization of expanded poly(tetrafluoroethylene) (ePTFE) membranes grafted with poly(ethylene glycol) methacrylate (PEGMA) macromonomer via surface-activated plasma treatment and thermally induced graft copolymerization. The chemical composition and microstructure of the surface-modified ePTFE membranes were characterized by Fourier transform infrared spectroscopy (FT-IR), contact angle, and bio-atomic force microscopy (bio-AFM) measurements. Biofouling property of the modified membranes was evaluated by the measurements of the plasma protein (γ-globulin, fibrinogen, or albumin) adsorption determined using an enzyme-linked immunosorbent assay (ELISA). In general, the hydrophilicity of the surface of ePTFE membranes increases with increasing the grafting degree of the copolymerized PEGMA. The highly hydrated PEGMA chain on the resulting ePTFE membranes was found to form a surface hydrogel-like layer with regulated coverage in aqueous state, which can be controlled by the content of PEGMA macromonomer in the reaction solution. The relative protein adsorption was effectively reduced with increasing capacity of the hydration for the PEGMA chain grafted on the ePTFE membrane surface. From both results of protein adsorption and platelet adhesion test in vitro, it is concluded that the PEGMA-grafted hydrophilic ePTFE membranes could provide good biofouling resistance to substantially reduce plasma protein and blood platelet fouling on the membrane surface in human body temperature.     

Squaric Acid Mediated Chemoselective PEGylation of Proteins: Reactivity of Single‐Step‐Activated α‐Amino Poly(ethylene glycol)s

The covalent attachment of poly(ethylene glycol) (PEG) to therapeutically active proteins (PEGylation) has become an important method to deal with the pharmacological difficulties of these polypeptides, such as short body‐residence times and immunogenicity. However, the derivatives of PEG used for PEGylation lack further functional groups that would allow the addition of targeting or labeling moieties. Squaric acid diethyl ester was used for the chemoselective single‐step activation of poly(ethylene glycol)s into the respective ester amides. The resultant selective protein‐reactive poly(ethylene glycol)s were investigated with respect to their selectivity towards amino acid residues in bovine serum albumin (as a model protein). The presented procedure relies on a robust two‐step protocol and was found to be selective towards lysine residues; the activated polyethers are efficient and stoichiometric PEGylation agents with a remarkable hydrolytic stability over a period of several days. By adjusting the pD value of the conjugation mixture, the chemoselectivity of the activated PEGs towards the α‐ and ε‐amino groups of lysine methyl ester was effectively changed.     

Poly (caprolactone)/poly (ethylene glycol) pervaporation blend membranes: Synthesis,characterization, and performance

Poly (caprolactone) membranes with addition of different poly (ethylene glycol) concentrations were prepared for separation of water/isopropanol azeotropic mixture by pervaporation process. Different characterization tests including Fourier transform infrared, scanning electron microscopy, water contact angle, and thermogravimetric analysis were carried out on the prepared membranes. In addition, the effect of poly (ethylene glycol) PEG content on the swelling degree and the performance of the prepared membranes in pervaporation process were investigated. According to the obtained results, all the membranes were water selective and the blend membrane containing 3 wt% PEG exhibited the best pervaporation performance with a water flux of 0.517 kg/m² hour and separation factor of 1642 at the ambient temperature. Hydrophilicity improvement of the blend membranes was confirmed by constant decrease in water contact angle of the membranes as PEG content increased in the casting solution. Scanning electron microscopy cross‐sectional images indicated that the blend membranes containing PEG had a closed cellular structure. Furthermore, mechanical and thermal properties of the membranes decreased by adding PEG.     

Sulfonated Poly(ether ether ketone) and Poly(ethylene glycol) Diacrylate Based Semi-Interpenetrating Network Membranes for Fuel Cells

Polymer electrolyte membranes are prepared from novel semi-interpenetrating polymer network material where the sulfonated poly (ether ether ketone) (SPEEK) is the linear polymer and the poly (ethylene glycol) diacrylate (PEGDA) is the cross-linking constituent. The semi-IPN is prepared by in situ polymerization of PEGDA in the presence of sulfonated poly (ether ether ketone). SPEEK is prepared by direct sulfonation of commercial PEEK (Gatone? 1100) by reported procedures. SPEEK with degree of sulfonation 63% (calculated from FT-NMR) is selected as the base membrane and different semi-IPN membranes were prepared by varying the PEGDA and SPEEK ratio. The degree of sulfonation of SPEEK and the formation of semi-IPN were confirmed by spectroscopy studies. The various semi-IPN membranes were characterized for ion-exchange capacity, water uptake, hydrolytic stability, proton conductivity and thermal stability for evaluating the suitability of these membranes for fuel cells. The proton conductivity of the membranes decreased with increasing PEGDA content. The Semi-IPN membranes exhibited conductivities (30°C) from 0.018 S/cm to 0.006 S/cm. These interpenetrating network membranes showed higher hydrolytic stability than the pure SPEEK membrane. This study shows that semi-IPN membranes based on PEGDA and SPEEK can be viable candidates for electrolyte membranes.     

Enhanced Gas Separation Performance by Embedding Submicron Poly(ethylene glycol) Capsules into Polyetherimide Membrane

Recently, hollow filler as an emerging concept is attracting more attention in preparation of mixed matrix membranes(MMMs). Herein,poly(ethylene glycol) microcapsules(PMC) are synthesized via distillation precipitation polymerization and embedded into the polyetherimide(Ultem■1000) matrix to fabricate MMMs for CO₂ capture. The PMC exhibits a preferential hollow structure within the Ultem matrix to furnish highways within membrane, and thus achieve high gas permeability. Meanwhile, the favorable affinity of poly(ethylene glycol)(PEG)microcapsule with ether oxygen group(EO) towards CO₂ enhances the CO₂ solubility selectivity. Such integration of physical and chemical microenvironments in the as-designed PEG microcapsule affords highly enhanced CO₂ separation performance. Compared to pristine Ultem■1000, the membrane with 2.5 wt% PMC loading exhibits 310% increment in CO₂ permeability and 22% increment in CO₂/N₂ selectivity,which shows the promising prospects of designing PEG-containing microcapsules as the filler of MMMs for CO₂ capture.     

Poly(ether imide) membranes modified with poly(ethylene imine) as potential carriers for epidermal substitutes

Poly(ether imide) (PEI) membranes were modified with a linear low-molecular weight (PETIM_0.6) and a branched high-molecular weight poly(ethylene imine) (PETIM_60). The membrane surfaces became more hydrophilic and the zeta potentials were shifted from negative to positive zeta values after immobilisation of both PETIM. These measurements also indicated the presence of a swollen surface layer in the case of PETIM_60, while a regular structuring of the surface was observed with scanning force microscopy for PETIM_0.6. A human keratinocyte cell line HaCaT was cultured on the different membranes. It was found that HaCaT cell growth was stimulated by PETIM_0.6. Cells reached earlier confluence on this substratum, while their growth was inhibited on a PEI membrane modified with PETIM_60, which makes PEI membranes modified with PETIM_0.6 a promising material for in vitro culture of epidermal transplants.