番石榴叶提取物的鉴定及其抗菌作用

采用纸片扩散法对番石榴叶提取物进行体外抗菌试验研究,以了解其抗菌谱.结果表明番石榴叶提取物中存在有效抗菌成分,其中以乙醇提取物中白念珠菌、甲醇提取物中大肠埃希菌高度敏感.     

Electrospinning preparation and mechanical properties of PVA/HNTs composite nanofibers

In this paper, the PVA/HNTs composite nanofibers with well‐enhanced mechanical properties were successfully prepared by electrospinning technique. The structure and properties of the composite nanofibers were characterized by TEM, XRD, FT‐IR, and DSC. The results indicated that the highly oriented and dispersed HNTs wrapped in polymer matrix were achieved by inducing function during electrospinning processing. The mechanical properties of the PVA/HNTs composite nanofibers depended on HNTs content were investigated, which showed 72.4% increase in tensile strength at optimal filling content. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantitative evaluation of antibacterial activities of nanoparticles (ZnO,TiO2, ZnO/TiO2, SnO2, CuO,ZrO2, and AgNO3) incorporated into polyvinyl butyral nanofibers

Novel hybrid polyvinyl butyral nanofibers have been developed for antimicrobial applications. The nanofiber mats were obtained from a needleless rod electrospinning system. The novel inorganic antibacterial agents were incorporated into the nanofibers, and their antibacterial activity was compared. The obtained nanoparticle/nanofiber hybrid mats have a good surface morphology. The results indicated that the CuO, ZnO, ZnO/TiO₂, and AgNO₃ nanoparticle‐incorporated nanofiber layers have excellent antibacterial activity against to Escherichia coli compared with TiO₂, SnO₂, and ZrO₂ ones. Copyright © 2016 John Wiley & Sons, Ltd.     

Electrospun Casein fibers obtained from revalued milk with mechanical and antibacterial properties

The present study describes the harnessing of revalued cow milk (denoted as waste milk) for fabricating casein fibers (CAS) with enhanced mechanical performance and antibacterial properties by the electrospinning method. For this purpose, polyethylene oxide (PEO) was employed (10 and 20 wt%) as a binder for the appropriate electrospun CAS fibers. Different amount of tannic acid (TA) was incorporated into casein/polyethylene oxide fibers (CAS/PEO) as a crosslinker agent, bringing filaments with a diameter of ca. 2 µm. The incorporation of 4 wt% of TA promotes the fibers' reticulation, forming a stable three-dimensional network. Also, the mechanical performance of CAS/PEO fibers was improved, where the tensile strength was increased from 0.91 MPa to 1.88 MPa with 4 % of TA, while the breaking elongation was increased from 93.74 % to 274.56 %. This behavior benefits the processing of fibers by electrospinning. Furthermore, the TA addition during the electrospun of CAS/PEO fibers enhances fibers' wettability properties and thermal stability induced by the crosslinker agent. Additionally, the antibacterial activity (AA) test demonstrates that CAS fibers can inhibit the growth of Gram-positive S. aureus and Gram-negative E. coli after 0.5 h, 1.5 h, 3 h, and 24 h of contact, which is generated by the TA addition. Our results suggest that the electrospun fabrication of CAS/PEO fibers with TA as a crosslinker agent represents an innovative harnessing of waste milk to produce functional textiles with potential biological application.     

Synthesis and mechanical properties of para‐aramid nanofibers

Scalable, bottom‐up chemical synthesis and electrospinning of novel Cl‐substituted poly(para‐phenylene terephthalamide) (PPTA) nanofibers are herein reported. To achieve Cl‐PPTA nanofibers, the chemical reaction between the monomers was precisely controlled, and dissolution of the polymer into solvent was tailored to enable anisotropic solution formation and sufficient entanglement molecular weight. Electrospinning processing parameters were studied to understand their effects on fiber formation and mat morphology and then optimized to yield consistently high quality fibers. Importantly, the control of relative humidity during the fiber formation process was found to be critical, likely because water promotes hydrogen bond formation between the PPTA chains. The fiber and mat morphologies resulting from different combinations of chemistry and spinning conditions were observed using scanning electron microscopy, and observations were used as inputs to the optimization process. Tensile properties of single Cl‐PPTA nanofibers were characterized for the first time using a nanomanipulator mounted inside a scanning electron microscope (SEM), and fiber moduli measuring up to 70 GPa, and strengths exceeding 1 GPa were achieved. Given the excellent mechanical properties measured for the nanofibers, this chemical synthesis procedure and electrospinning protocol appear to be a promising route for producing a new class of nanofibers with ultrahigh strength and stiffness. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 563–573     

Controlling the surface structure,mechanical properties,crystallinity, and piezoelectric properties of electrospun PVDF nanofibers by maneuvering molecular weight

Polyvinylidene fluoride (PVDF) is a significant polymer in the formation of nanofiber webs via the electrospinning technique. In this paper, three PVDF-wrinkled fiber webs with different molecular weights (M_Ws) (180000, 275000, and 530000) were generated via the electrospinning method by using tetrahydrofuran/N,N-dimethylformamide at the solvent ratio of 1:1 as a mixed solvent. The formation mechanism of the wrinkled electrospun PVDF fibers is demonstrated. Furthermore, the relationships between the M_W and the surface structure, mechanical properties, crystalline phases, and piezoelectric properties of electrospun PVDF fibers are comprehensively investigated. The results reported that the surface structure, mechanical properties, crystalline phases, and piezoelectric properties of wrinkled electrospun PVDF fibers can be affected intensely by maneuvering the M_W. We believe this study can be served as a good reference for the effect of M_W on the morphology and properties of electrospun fibers.     

Electrospinning fabrication of partially crystalline bisphenol A polycarbonate nanofibers: Effects on conformation, crystallinity, and mechanical properties

The application of an electrostatic and centrifugal field (1800 rpm) in a novel electrospinning process was shown to improve the degree of uniaxial alignment in polymer nanofibers and to enhance orientational order in polymer chains, producing bisphenol A polycarbonate (BPAPC) nanofibers with superior mechanical properties. High-speed videography showed that the additional centrifugal field effectively removed electrical bending instability and promoted molecular orientation during the electrospinning process. Infrared spectroscopic (IR) characterization revealed that the fraction of trans–trans conformers in BPAPC nanofibers reached 67% under optimal electrospinning conditions (25 kV and 1800 rpm at 25 °C). Modulated differential scanning calorimetry (MDSC) and wide-angle X-ray diffraction (WXRD) assays showed that a degree of crystallinity of 6.5% could be achieved. Moreover, two crystal phases at angles of 2θ = 17.3° and 21.9° were produced in BPAPC nanofibers. The elastic modulus of BPAPC nanofibers with a crystallinity of 6.5% was 7.11 and 5.13 GPa, as measured via atomic force microscopy (AFM) and nanoindenter (NI) experiments, respectively. These results demonstrated that the mechanical behavior of BPAPC nanofibers could be improved by conducting the proposed electrospinning technique. Moreover, BPAPC nanofibers produced through the proposed method could be potentially applied for the reinforcement of composites.     

Investigation of nanomechanical and morphological properties of silane-modified halloysite clay nanotubes reinforced polycaprolactone bio-composite nanofibers by atomic force microscopy

There is remarkable interest in the fabrication of polymeric composite nano/micro-fibers by electrospinning for many applications ranging from bioengineering to water/air filtration. In almost all of these applications, the mechanical properties of both the polymer fibers and their assemblies, are significant. In this study, unmodified, 3-Glycidoxypropyltrimethoxysilane (GPTMS) or 3-Aminopropyltriethoxysilane (APTES) modified halloysite clay nanotube (HNT) reinforced polycaprolactone (PCL) nanofibers were successfully synthesized via the electrospinning. The morphology and mechanical features of the obtained electrospun fibers were investigated by atomic force microscopy (AFM) and AFM-based nanoindentation for single fibers in nanoscale, respectively. Besides, scanning electron microscopy and tensile strength tests were used to investigate whole fibrous structures in microscale. The AFMresults, accompanied by SEM and tensile strength, support the conclusion that silane-modification affected positively the morphology and mechanical characteristics of electrospun PCL nanofibers. Therefore, it was concluded that the morphological and mechanical features from the single fibers in the nanofiber mats were related to the whole fibrous structure.     

Size‐dependent mechanical properties of glassy polymer nanofibers via molecular dynamics simulations

The microstructure of polymer matrix under cylindrical confinement is key to understanding the size‐dependent thermomechanical behavior of electrospun nanofibers. Coarse‐grained molecular dynamics simulation was applied here to probe polymer systems under cylindrical confinement, prepared with or without pre‐stretching. Simulation results showed that below a certain radius, a noticeable increase of the elastic modulus is observed with the decrease of the radius of cylindrical confinement. This size‐dependent mechanical behavior correlated to the degree of polymer chain orientation. Modulation of density and bond orientation in the radial direction was observed: the density and bond orientation began to oscillate, increasing the oscillation amplitudes with decreases in the radius. Such behavior suggests that the cylindrical confinement enhances the bond alignment of the entire fiber and not in the near‐surface layers only. The unstretched fibers had uniform density distribution along the fiber axis, while the stretched fibers demonstrated a fluctuation in density distribution. The crossover radius of size‐dependent behavior was two orders of magnitude smaller than observed in real experiments, demonstrating that the confinement affects some internal fiber scale, which exceeds the scale of individual macromolecules, and this internal scale may be related to supramolecular structures of the polymer matrix rather than the individual macromolecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 506–514     

Surface morphology and mechanical response of randomly oriented electrospun nanofibrous membrane

Electrospinning for the fabrication of fibrous membranes has received great attention due to the simplicity of the technique, ability to effectively control the process and potential for production scale-up. While the optimization of electrospinning parameters for various polymers is widely investigated, the mechanical characterization and modeling of the mechanical response of electrospun membranes remain a major challenge. The present work focuses on the mechanical characterization of electrospun nanofibrous membrane under simple and complex loading conditions. For this purpose, polyvinylidene fluoride (PVDF) is considered for the membrane material. Three types of uniaxial mechanical tests are conducted: monotonic tensile test, cyclic loading test with increasing maximum strain and cyclic-relaxation test. The evolution of fiber re-orientation with deformation is also investigated. Results show that the membrane is initially isotropic in the plane. Moreover, the evolution of membrane Young’s modulus with increasing maximum strain suggests that mechanical deformation induces two interacting phenomena: fiber re-orientation and inter-fiber bond damage.     

Evaluation of the antioxidant and antibacterial properties of ethanol extracts from berries,leaves and stems of Hedera pastuchovii Woron. ex Grossh

This study was designed to examine the total phenolic and flavonoid contents, radical scavenging and antibacterial activity of the ethanolic extracts from leaves, berries and stems of Hedera pastuchovii Woron. ex Grossh. The berry extract, which contained the highest phenolic and flavonoid compounds, showed an appreciable DPPH^√ scavenging ability in comparison with leaf and stem extracts. The various extracts exhibited moderate to good activity against both Gram-negative and Gram-positive bacteria, and the effectiveness of leaf extract was higher for all tested bacteria.     

ZnO掺杂的SnO_2纳米纤维的制备、表征及气敏机理(英文)

以二水氯化亚锡(SnCl2·2H2O)为盐原料,采用静电纺丝的方法制备了SnO2纳米纤维.为了研究ZnO掺杂对SnO2形貌、结构及化学成分的影响,分别制备了不同含量ZnO掺杂的SnO2/ZnO复合材料.利用热重-差热分析(TG-DTA)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱仪、扫描电镜(SEM)及能量色散X射线(EDX)光谱对材料的结晶学特性及微结构进行了表征.制备的SnO2/ZnO复合材料是由纳米量级的小颗粒构成的分级结构材料.ZnO含量不同,对应的SnO2/ZnO复合材料结构不同.表征结果表明ZnO的掺杂量对SnO2材料的形貌及结构均起着重要作用.将制备的不同ZnO含量的SnO2/ZnO复合材料进行气敏测试,测试结果表明,Sn:Zn摩尔比为1:1制作的气敏元件对甲醇的灵敏度优于其它摩尔比的气敏元件.讨论了SnO2/ZnO复合材料气敏元件的敏感机理.同时针对Sn:Zn摩尔比为1:1时表现出最好的气敏响应,分析了其原因,包括Zn的替位式掺杂行为、ZnO的催化作用、过量ZnO对SnO2生长的抑制作用以及SnO2与ZnO晶粒界面处的异质结.     

A new indole alkaloid,antioxidant and antibacterial activities of crude extracts from Saccocalyx satureioides

Abstract

The new acylated indole alkaloid glucoside indole-3-carboxylic acid-(6'-O-caffeoyl)-β-D-glucoside 1 has been isolated from the ethyl acetate (EtOAC) extract of Saccocalyx satureioides Coss. & Dur. (Lamiaceae) together with eight known secondary metabolites 2-9. Two indoles 2 and 3, five methylated flavone aglycones 4-8 and one monoterpene glucoside 9 were reported for the first time in the genus Saccocalyx. The structural elucidation of these compounds was accomplished by spectroscopic methods including 1?D (¹H and ¹³C) and 2?D (COSY, HSQC and HMBC) NMR techniques, and mass spectrometry, and by comparison with literature data. Light petroleum, EtOAc, chloroform and n-butanol (n-BuOH) extracts of S. Satureioides were screened for their antioxidant activity using DPPH radical scavenging and β-carotene bleaching methods. The antibacterial activity of these extracts indicates that n-BuOH and EtOAc extracts possess the strongest activity.     

Design,synthesis, characterization and antibacterial properties of copper(II) complexes with chromone‐derived compounds

A new series of six chromone‐derived compounds and their Cu(II) complexes was synthesized and characterized by their physical, spectral and analytical data The elemental analysis data of the complexes agree well with the proposed composition of the compounds, which were found to be dimeric in nature with two hydrazine molecules bridging the two copper atoms through coordination. The ligands and their Cu(II) complexes were screened for their in‐vitro antibacterial activity against four Gram‐negative (Escherichia coli, Pseudomonas aeruginosa, Salmonella typhi, Shigella flexneri) and two Gram‐positive (Bacillus subtilis, Staphylococcus aureus) bacterial strains by the agar‐well diffusion method. The ligands were found to exhibit either no or low to moderate activities against one or more of the bacterial species, whereas all the metal complexes exhibited moderate to high activities against different bacterial species. The ligands which were inactive before complexation turned active and less active ones became more active upon coordination with copper ions. Overall, the complexes 7–12 showed comparatively much higher activities than the ligands. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel polyamide-based nanofibers prepared by electrospinning technique for headspace solid-phase microextraction of phenol and chlorophenols from environmental samples

A novel solid phase microextraction (SPME) fiber was fabricated by electrospinning method in which a polymeric solution was converted to nanofibers using high voltages. A thin stainless steel wire was coated by the network of polymeric nanofibers. The polymeric nanofiber coating on the wire was mechanically stable due to the fine and continuous nanofibers formation around the wire with a three dimensional structure. Polyamide (nylon 6), due to its suitable characteristics was used to prepare the unbreakable SPME nanofiber. The scanning electron microscopy (SEM) images of this new coating showed a diameter range of 100–200 nm for polyamide nanofibers with a homogeneous and porous surface structure. The extraction efficiency of new coating was investigated for headspace solid-phase microextraction (HS-SPME) of some environmentally important chlorophenols from aqueous samples followed by gas chromatography–mass spectrometry (GC–MS) analysis. Effect of different parameters influencing the extraction efficiency including extraction temperature, extraction time, ionic strength and polyamide amount were investigated and optimized. In order to improve the chromatographic behavior of phenolic compounds, all the analytes were derivatized prior to the extraction process using basic acetic anhydride. The detection limits of the method under optimized conditions were in the range of 2–10 ng L⁻¹. The relative standard deviations (RSD) (n = 3) at the concentration level of 1.7–6.7 ng mL⁻¹ were obtained between 1 and 7.4%. The calibration curves of chlorophenols showed linearity in the range of 27–1330 ng L⁻¹ for phenol and monochlorophenols and 7–1000 ng L⁻¹ for dichloro and trichlorophenols. Also, the proposed method was successfully applied to the extraction of phenol and chlorophenols from real water samples and relative recoveries were between 84 and 98% for all the selected analytes except for 2,4,6 tricholophenol which was between 72 and 74%.     

Chemical investigations of male and female leaf extracts from Schinus molle L.

The pepper-tree Schinus molle is an evergreen ornamental plant with various and diversified list of medical uses. In this article we analysed the chemical composition of male and female leaves of this plant during the off-flowering and flowering seasons. The leaf extracts were obtained by using a sequential extraction with solvents of different polarities and the chemical composition was investigated by GC-MS. The results showed a total of twenty-three components, in which elemol is the most abundant constituent followed by bicyclogermacrene, γ-eudesmol, α-eudesmol, β-eudesmol and isocalamendiol. The petroleum ether and diethyl ether extracts from male and female flowering and off-flowering leaves consisted of sesquiterpene hydrocarbons as a major constituent followed by monoterpene hydrocarbons, while the acetone extracts showed a different composition. The obtained results show differences in the chemical composition between male and female and flowering and not flowering.     

Hierarchical porous nanofibers of carbon@nickel oxide nanoparticles derived from polymer/block copolymer system

The triblock copolymer (PAA-b-PAN-b-PAA) is prepared by reversible addition-fragmentation chain-transfer polymerization, and then blended with polymer (PAN) and metal hydroxide (Ni(OH)₂) as a precursor for heat-treatment. A composite material of hierarchical porous nanofibers and nickel oxide nanoparticles (HPCF@NiO) is prepared by electrospinning combined with high-temperature carbonization. The effects of the ratio of PAA and PAA-b-PAN-b-PAA on the internal structure of nanofibers and their electrochemical properties as positive electrode materials are investigated. The experimental results show that when the ratio of PAA to PAA-b-PAN-b-PAA is 1.3 to 0.4, it has good pore structure and excellent electrochemical performance. At the current density of 1 A/g, the specific capacitance is 188.7 F/g and the potential window is −1 V to 0.37 V. The asymmetric supercapacitor assembled with activated carbon as the negative electrode materials has a specific capacitance of 21.2 F/g in 2 mol/L KOH and a capacitance retention of 85.7% after 12,500 cycles at different current density.     

Phenanthrenes from Arundina graminifolia and in vitro evaluation of their antibacterial and anti-haemolytic properties

Chemical investigation and activity test of Arundina graminifolia led to the isolation of six phenanthrenes: blestriarene A (1), shancidin (2), densiflorol B (3), ephemeranthoquinone (4), coelonin (5) and lusianthridin (6). The isolated compounds demonstrated antibacterial and anti-haemolytic activities. It was found that compounds 1 and 2 had medium antibacterial activity against Staphylococcus aureus, Bacillus subtilis and Escherichia coli, with MICs of 20–40 μg/mL and MBCs of 40–320 μg/mL. Bactericidal mechanisms were explored. Rupture of cell wall and membrane and leakage of nuclear mass were observed by transmission electron microscopy (TEM). Moreover, compounds 1–3 attenuated the erythrocyte damage. Compounds 1 and 2 showed significant anti-haemolytic activity with inhibition rate about 50% at 16 μg/mL.     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

Metal‐based sulfonamides: synthesis,characterization, antibacterial,antifungal and cytotoxic properties of pyrrolyl‐ and thienyl‐derived compounds

Pyrrolyl and thienyl derived sulfonamides and their metal [cobalt(II), copper(II), nickel(II) and zinc(II)] complexes were synthesized and characterized by elemental analyses, molar conductances, magnetic moments, IR, ¹H NMR, ¹³C NMR and electronic spectral data. These compounds were screened for in‐vitro antibacterial activity against four Gram‐negative (Escherichia coli, Shigella flexeneri, Pseudomonas aeruginosa and Salmonella typhi) and two Gram‐positive (Bacillus subtilis and Staphylococcus aureus) bacterial strains, and for in‐vitro antifungal activity against Trichophyton longifusus, Candida albicans, Aspergillus flavus, Microsporum canis, Fusarium solani and Candida glaberata. The results of these studies revealed that all compounds showed significant to moderate antibacterial activity; however, the zinc complexes were shown to be the most active against various species. The brine shrimp bioassay was also carried out to study their in vitro cytotoxic properties of all the synthesized ligands and their metal complexes. Only two compounds ( 14 and 19 ) displayed potent cytotoxic activity as LD₅₀ = 5.5637 × 10^?4 and 4.4023 × 10^?4 M ml^?1 respectively, against Artemia salina. Copyright © 2007 John Wiley & Sons, Ltd.