Push-Pull Effect of Terpyridine Substituted by Triphenylamine Motive—Impact of Viscosity,Polarity and Protonation on Molecular Optical Properties

The introduction of an electron-donating triphenylamine motive into a 2,2′,6′,2′′-terpyridine (terpy) moiety, a cornerstone molecular unit in coordination chemistry, opens new ways for a rational design of photophysical properties of organic and inorganic compounds. A push-pull compound, 4′-(4-(di(4-tert-butylphenyl)amine)phenyl)-2,2′,6′,2′′-terpyridine (tBuTPAterpy), was thoroughly investigated with the use of steady-state and time-resolved spectroscopies and Density Functional Theory (DFT) calculations. Our results demonstrate that solvent parameters have an enormous influence on the optical properties of this molecule, acting as knobs for external control of its photophysics. The Intramolecular Charge Transfer (ICT) process introduces a remarkable solvent polarity effect on the emission spectra without affecting the lowest absorption band, as confirmed by DFT simulations, including solvation effects. The calculations ascribe the lowest absorption transitions to two singlet ICT excited states, S₁ and S₂, with S₁ having several orders of magnitude higher oscillator strength than the “dark” S₂ state. Temperature and viscosity investigations suggest the existence of two emitting excited states with different structural conformations. The phosphorescence emission band observed at 77 K is assigned to a localized ³terpy state. Finally, protonation studies show that tBuTPAterpy undergoes a reversible process, making it a promising probe of the pH level in the context of acidity determination.     

Desymmetrizing Heteroleptic [Cu(P^P)(N^N)][PF6] Compounds: Effects on Structural and Photophysical Properties,and Solution Dynamic Behavior

The preparation, characterization and electrochemical and photophysical properties of a series of desymmetrized heteroleptic [Cu(P^P)(N^N)][PF₆] compounds are reported. The complexes incorporate the chelating P^P ligands bis(2-(diphenylphosphanyl)phenyl)ether (POP) and (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane) (xantphos), and 6-substituted 2,2′-bipyridine (bpy) derivatives with functional groups attached by –(CH₂)_n– spacers: 6-(2,2′-bipyridin-6-yl)hexanoic acid (1), 6-(5-phenylpentyl)-2,2′-bipyridine (2) and 6-[2-(4-phenyl-1H-1,2,3,triazol-1-yl)ethyl]-2,2′-bipyridine (3). [Cu(POP)(1)][PF₆], [Cu(xantphos)(1)][PF₆], [Cu(POP)(2)][PF₆], [Cu(xantphos)(2)][PF₆], and [Cu(xantphos)(3)][PF₆] have been characterized in solution using multinuclear NMR spectroscopy, and the single crystal structure of [Cu(xantphos)(3)][PF₆]^.0.5Et₂O was determined. The conformation of the 6-[2-(4-phenyl-1H-1,2,3,triazol-1-yl)ethyl]-substituent in the [Cu(xantphos)(3)]⁺ cation is such that the α- and β-CH₂ units reside in the xanthene ‘bowl’ of the xantphos ligand. The 6-substituent desymmetrizes the structure of the [Cu(P^P)(N^N)]⁺ cation and this has consequences for the interpretation of the solution NMR spectra of the five complexes. The NOESY spectra and EXSY cross-peaks provide insight into the dynamic processes operating in the different compounds. For powdered samples, emission maxima are in the range 542–555 nm and photoluminescence quantum yields (PLQYs) lie in the range 13–28%, and a comparison of PLQYs and decay lifetimes with those of [Cu(xantphos)(6-Mebpy)][PF₆] indicate that the introduction of the 6-substituent is not detrimental in terms of the photophysical properties.     

Synthesis and Photophysical Properties of α-(N-Biphenyl)-Substituted 2,2′-Bipyridine-Based Push–Pull Fluorophores

A series of new α-(N-biphenyl)-substituted 2,2′-bipyridines were obtained through the combination of the ipso-nucleophilic aromatic substitution of the C5-cyano group, aza-Diels–Alder and Suzuki cross-coupling reactions, starting from 5-cyano-1,2,4-triazines. For the obtained compounds, photophysical and fluorosolvatochromic properties were studied. Fluorophores 3l and 3b demonstrated unexpected AIEE activity, while 3a and 3h showed promising nitroexplosive detection abilities.     

Effects of 2′,4′-Dihydroxy-6′-methoxy-3′,5′-dimethylchalcone from Syzygium nervosum Seeds on Antiproliferative,DNA Damage,Cell Cycle Arrest,and Apoptosis in Human Cervical Cancer Cell Lines

2′,4′-Dihydroxy-6′-methoxy-3′,5′-dimethylchalcone (DMC), a natural product derived from Syzygium nervosum A. Cunn. ex DC., was investigated for its inhibitory activities against various cancer cell lines. In this work, we investigated the effects of DMC and available anticervical cancer drugs (5-fluorouracil, cisplatin, and doxorubicin) on three human cervical cancer cell lines (C-33A, HeLa, and SiHa). DMC displayed antiproliferative cervical cancer activity in C-33A, HeLa, and SiHa cells, with IC₅₀ values of 15.76 ± 1.49, 10.05 ± 0.22, and 18.31 ± 3.10 µM, respectively. DMC presented higher antiproliferative cancer activity in HeLa cells; therefore, we further investigated DMC-induced apoptosis in this cell line, including DNA damage, cell cycle arrest, and apoptosis assays. As a potential anticancer agent, DMC treatment increased DNA damage in cancer cells, observed through fluorescence inverted microscopy and a comet assay. The cell cycle assay showed an increased number of cells in the G₀/G₁ phase following DMC treatment. Furthermore, DMC treatment-induced apoptosis cell death was approximately three- to four-fold higher compared to the untreated group. Here, DMC represented a compound-induced apoptosis for cell death in the HeLa cervical cancer cell line. Our findings suggest that DMC, a phytochemical agent, is a potential candidate for antiproliferative cervical cancer drug development.     

Kinetics of 2,2′-Bipyridyl-Catalyzed Oxidation of Isopropyl Alcohol with Chromic Acid

2,2′-Bipyridyl and some substituted compounds catalyze effectively the oxidation of isopropyl alcohol by chromic acid. The reaction is first order in chromium(VI), alcohol and 2,2′-bipyridyl; it is first order in hydrogen ions at high acidity and slightly alters to second order at low acidity. The proposed mechanism shows that the rate-limiting step is mainly the decomposition of a termolecular complex to products. However, at low acidity, the formation step of this complex is a little less reversible and hence somewhat rate-limiting. Electron-donating substituents at the 4-position enhance the catalytic activity. Electron-withdrawing substituents at the 4- and 2-positions diminish the reaction rates by electronic and steric factors.     

Ring current and steric effects on 1H chemical shifts of Ru coordinated 2,2′‐bipyridyls

Ring current and proximity effects may be responsible for both low‐ and high‐frequency shifts of the aromatic protons of Ru coordinated bipyridyls according to the different geometries depending on whether two or three bipyridyls are coordinated. Copyright © 2003 Crown in the right of Canada. Published by John Wiley & Sons, Ltd.     

Sustainable Protocol for the Synthesis of 2′,3′-Dideoxynucleoside and 2′,3′-Didehydro-2′,3′-dideoxynucleoside Derivatives

An improved protocol for the transformation of ribonucleosides into 2′,3′-dideoxynucleoside and 2′,3′-didehydro-2′,3′-dideoxynucleoside derivatives, including the anti-HIV drugs stavudine (d4T), zalcitabine (ddC) and didanosine (ddI), was established. The process involves radical deoxygenation of xanthate using environmentally friendly and low-cost reagents. Bromoethane or 3-bromopropanenitrile was the alkylating agent of choice to prepare the ribonucleoside 2′,3′-bisxanthates. In the subsequent radical deoxygenation reaction, tris(trimethylsilyl)silane and 1,1′-azobis(cyclohexanecarbonitrile) were used to replace hazardous Bu₃SnH and AIBN, respectively. In addition, TBAF was substituted for camphorsulfonic acid in the deprotection step of the 5′-O-silyl ether group, and an enzyme (adenosine deaminase) was used to transform 2′,3′-dideoxyadenosine into 2′,3′-dideoxyinosine (ddI) in excellent yield.     

Expanded Ligands Based upon Iron(II) Coordination Compounds of Asymmetrical Bis(terpyridine) Domains

The synthesis and characterization of two tritopic ligands containing a 2,2′:6′,2″-terpyridine (tpy) metal binding domain and either a 3,2′:6′,3″- or a 4,2′:6′,4″-tpy domain are detailed. The synthetic routes to these ligands involved the [Pd(dppf)Cl₂]-catalyzed coupling of a boronic ester-functionalized 2,2′:6′,2″-tpy with bromo-derivatives of 3,2′:6′,3″-tpy or 4,2′:6′,4″-tpy. The 2,2′:6′,2″-tpy domains of the tritopic ligands preferentially bind Fe²⁺ in reactions with iron(II) salts leading to the formation of two homoleptic iron(II) complexes containing two peripheral 3,2′:6′,3″-tpy or 4,2′:6′,4″-tpy metal-binding sites, respectively. These iron(II) complexes are potentially tetratopic ligands and represent expanded versions of tetra(pyridin-4-yl)pyrazine.     

Synthesis and Biological Evaluation of 5′-O-Fatty Acyl Ester Derivatives of 3′-Fluoro-2′,3′-dideoxythymidine as Potential Anti-HIV Microbicides

A number of 5′-O-fatty acyl derivatives of 3′-fluoro-2′,3′-dideoxythymidine (FLT, 1) were synthesized. These conjugates were evaluated for their potential as topical microbicides with anti-HIV activity against cell-free (X4 and R5), cell-associated, and multidrug-resistant viruses. Compared to FLT and 3′-azido-2′,3′-dideoxythymidine (AZT), 5′-O-(12-azidododecanoyl) (5), 5′-O-myristoyl (6), and 5′-O-(12-thioethyldodecanoyl) (8) derivatives of FLT were found to be more active against both cell-free viruses (lymphocytotropic and monocytotropic strains) with EC₅₀ values of 0.4 μM, 1.1 μM, and <0.2 μM, respectively, as well as cell-associated virus with EC₅₀ values of 12.6, 6.4, and 2.3 μM, respectively. Conjugates 5, 6, and 8 exhibited >4 and >30 times better antiviral index than FLT and AZT, respectively. Conjugates 5 and 8 were significantly more potent than FLT against many multidrug-resistant strains. A comparison of the anti-HIV activity with the corresponding non-hydrolyzable ether conjugates suggested that ester hydrolysis to FLT and fatty acids is critical to enable anti-HIV activity. Cellular uptake studies were conducted using fluorescent derivatives of FLT attached with 5(6)-carboxyfluorescein through either β-alanine (23) or 12-aminododecanoic acid (24) spacers. The lipophilic fluorescent analog with a long chain (24) showed more than 12 times higher cellular uptake profile than the fluorescent analog with a short chain (23). These studies further confirmed that the attachment of fatty acids improved the cellular uptake of nucleoside conjugates. In addition, 5, 6, and 8 were the least cytotoxic and did not alter vaginal cell and sperm viability compared to the positive control, a commercial topical spermicide (N-9), which significantly decreased sperm and vaginal cell viability inducing the generation of proinflammatory cytokines.     

New TEMPO–Appended 2,2′-Bipyridine-Based Eu(III), Tb(III), Gd(III) and Sm(III) Complexes: Synthesis,Photophysical Studies and Testing Photoluminescence-Based Bioimaging Abilities

Linked to Alzheimer’s disease (AD), amyloids and tau-protein are known to contain a large number of cysteine (Cys) residues. In addition, certain levels of some common biogenic thiols (cysteine (Cys), homocysteine (Hcy), glutathione (GSH), etc.) in biological fluids are closely related to AD as well as other diseases. Therefore, probes with a selective interaction with the above-mentioned thiols can be used for the monitoring and visualizing changes of (bio)thiols in the biological fluids as well as in the brain of animal models of Alzheimer’s disease. In this study, new Eu(III), Tb(III), Gd(III) and Sm(III) complexes of 2,2′-bipyridine ligands containing TEMPO fragments as receptor units for (bio)thiols are reported. The presence of free radical fragments of the ligand in the complexes was proved by using the electronic paramagnetic resonance (EPR) method. Among all the complexes, the Eu(III) complex turned out to be the most promising one as luminescence- and spin-probe for the detection of biogenic thiols. The EPR and fluorescent titration methods showed the interaction of the resulting complex with free Cys and GSH in solution. To study the practical applicability of the probes for the monitoring of AD in-vivo, by using the above-mentioned Eu(III)-based probe, the staining of the brain of mice with amyloidosis and Vero cell cultures supplemented with the cysteine-enriched medium was studied as well as the fluorescence titration of Bovine Serum Albumin, BSA (as the model for the thiol moieties containing protein), was carried out. Based on the results of fluorescence titration, the formation of a non-covalent inclusion complex between the above-mentioned Eu(III) complex and BSA was suggested.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

Isomers of Terpyridine as Ligands in Coordination Polymers and Networks Containing Zinc(II) and Cadmium(II)

The use of divergent 4,2′:6′,4″- and 3,2′:6′,3″-terpyridine ligands as linkers and/or nodes in extended coordination assemblies has gained in popularity over the last decade. However, there is also a range of coordination polymers which feature 2,2′:6′,2″-terpyridine metal-binding domains. Of the remaining 45 isomers of terpyridine, few have been utilized in extended coordination arrays. Here, we provide an overview of coordination polymers and networks containing isomers of terpyridine and either zinc(II) and cadmium(II). Although the motivation for investigations of many of these systems is their luminescent behavior, we have chosen to focus mainly on structural details, and we assess to what extent assemblies are reproducible. We also consider cases where there is structural evidence for competitive product formation. A point that emerges is the lack of systematic investigations.     

3D Metal–Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis,Crystal Structures,Gas Adsorption,and Magnetic Properties

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc²⁻) [Co₃(btdc)₃(bpy)₂]·4DMF, 1; [Co₃(btdc)₃(pz)(dmf)₂]·4DMF·1.5H₂O, 2; [Co₃(btdc)₃(dmf)₄]∙2DMF∙2H₂O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co₃(RCOO)₆}, connected either by btdc^2– ligands (1, 3) or by both btdc^2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N₂, O₂, CO, CO₂, CH₄ adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m²⋅g⁻¹ and promising gas separation performance with selectivity factors up to 35.7 for CO₂/N₂, 45.4 for CO₂/O₂, 20.8 for CO₂/CO, and 4.8 for CO₂/CH₄. The molar magnetic susceptibilities χ_p(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μ_eff (300 K) ≈ 4.93 μ_B. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.     

Komplexe von Vanadium und Titan mit 2,2′-Dihydroxyazobenzen. Kristallstrukturen von 2,2′-Dihydroxyazobenzenato(2-)-oxo-methoxo-methanol-vanadium(V) und μ-Oxo-bis[2,2′-dihydroxyazobenzenato(2-)-oxo-vanadium(V)]

Complexes of Vanadium and Titanium with 2,2′-Dihydroxyazobenzene. Crystal Structure of 2,2′-Dihydroxybenzenato(2-)-oxo-methoxo-methanol-vanadium(V) and μ-Oxo-bis[2,2′-dihydroxyazobenzenato(2-)-oxo-vanadium(V)] By the reaction of 2,2-dihydroxyazobenzene with titanium(IV) the expected compound bis [2,2′-dihydroxybenzenato(2-)-titanium(IV)] was obtained. On the other hand in the dependence on the experimental conditions vanadium forms further compounds beside the bisligand complex. They were characterized by mass spectrometry resp. X-ray structural analysis. Crystallographic data see ?Inhaltsübersicht”?.     

Preparation and properties of polyarylates both from 2,2′-bibenzoyl chloride and bisphenols and from biphenyl-2,2′-diol and aromatic dicarboxylic acid chlorides

Polyarylates having inherent viscosities up to 1.02 dL/g were synthesized both by the phase-transfer catalyzed two-phase polycondensation of 2,2′-bibenzoyl chloride with various bisphenols and by the high-temperature solution polycondensation of biphenyl-2,2′-diol with aromatic dicarboxylic acid chlorides. All the polyarylates were amorphous and soluble in a variety of organic solvents including N,N-dimethylformamide, N-methyl–2-pyrrolidone, chloroform, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the chloroform solutions. These polyarylates had glass transition temperatures in the range of 120–250°C and began to lose weight at around 380°C in air. © 1992 John Wiley & Sons, Inc.     

Characterization of Three Novel 4-Methylaminorex Derivatives Applied as Designer Drugs

The ongoing development of more and more new psychoactive substances continues to be a huge problem in 2022 affecting the European and international drug market. Through slight alterations in the structure of illicit drugs, a way to circumvent the law is created, as the created derivatives serve as legal alternatives with similar effects. A common way of structure modification is the induction of a halogen residue. Recently, halogenated derivatives of the well-known designer drug 4-methylaminorex appeared on the market and are available in various online shops. In this study, three novel halogenated 4-methylaminorex derivatives, namely 4′-fluoro-4-methylaminorex, 4′-chloro-4-methylaminorex, and 4′-bromo-4-methylaminorex, were purchased online and characterized using nuclear magnetic resonance (NMR) spectroscopy, liquid chromatography-high-resolution mass spectrometry (LC-HRMS), and chiral high-performance liquid chromatography with ultraviolet detection (HPLC-UV). These derivatives possess two stereogenic centers, and analyses revealed that all of them were present as a racemic mixture of the trans diastereomeric form.     

The diverse behaviour of the P–Cl bonds in the spiro–cis–ansa spermidine derivative cyclotriphosphazene towards mono-functional nucleophilic reagents

A number of new spiro–ansa spermidine derivative cyclotriphosphazenes (2–10) is synthesized in order to provide insight into the reaction mechanism for nucleophilic substitution. The structures of the compounds were determined by elemental analysis, mass (MS), ¹H, ¹⁹F (for 9) and ³¹P NMR spectroscopies. Compounds (2–8) and 9, 10 can be formed by a proton abstraction–chloride elimination and both the and reaction mechanisms, respectively.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.