Chemosensor properties of 7-hydroxycoumarin substituted cyclotriphosphazenes

The newly synthesized cyclotriphosphazene cored coumarin chemosensors 5, 6, and 7 were successfully characterized by ¹ H NMR, ³¹ P NMR, and MALDI-TOF mass spectrometry. Additionally, the photophysical and metal sensing properties of the targeted compounds were determined by fluorescence spectroscopy in the presence of various metals (Li ⁺ , Na ⁺ , K ⁺ , Cs ⁺ , Mg ²⁺ , Ca ²⁺ , Ba ²⁺ , Cr ³⁺ , Mn ²⁺ , Fe ³⁺ , Co ²⁺ , Al ³⁺ , Hg ⁺ , Cu ²⁺ , Zn ²⁺ , Ag ⁺ , and Cd ²⁺ ) . The fluorescence titration results showed that compounds 5, 6, and 7 could be employed as fluorescent chemosensors for Fe ³⁺ ions with high sensitivity. The complex stoichiometry between final cyclotriphosphazene chemosensors and Fe ³⁺ ions was also determined by Job’s plots.     

Electrochemical synthesis for new thiosemicarbazide complexes,spectroscopy, cyclic voltammetry,structural properties,and in silico study

A new thiosemicarbazide derivative ligand (HDCTS) was prepared from the reaction between 2,4‐dinitrophenylhydrazine and 4‐chlorophenyl isothiocyanate. Co(II) and Cu(II) complexes were synthesized from HDCTS derivative by electrochemical method to reach preferable yield in a safe environment. The new complexes as well as the original ligand were fully characterized to establish their chemical formulae. The spectral (infrared, Raman, mass, and ultraviolet–visible), analytical (elemental, thermogravimetric analysis [TGA], and cyclic voltammetry), and conformational techniques were implemented for characterization. According to spectral data and magnetic moments, the octahedral arrangement was proposed around metals through mono‐negative bidentate mode of bonding. TGA discriminates and quantitatively evaluates the presence of water molecules within two complexes. Electrochemical study was interested for all new compounds and suggests the electrode couples to be close for quasi‐reversible behavior. Elaborated conformational study was displayed to extract significant characteristics, which assert firstly on the mode of bonding inside the complexes. The perfect distribution of NH and CS groups inside the optimized structures facilitates their coordination as spectrally proposed. Crystal explorer program was used to investigate the degree of contact between molecules inside crystal packing systems. Effective contribution in surface contact feature was noticed from O and Cl atoms. A certified in silico study concerning the docking feature of new compounds against effective proteins in allergy and inflammation diseases was done. According to data exported, a promising anti‐allergic or anti‐inflammatory efficiency is expected strongly from Cu(II)–DCTS complex.     

Synthesis of thiophene-substituted aza-BODIPYs and their optical and electrochemical properties

A series of novel thiophene-substituted aza-BODIPY dyes were synthesized by means of a standard procedure and complemented by a Stille-coupling of a brominated species with 2-tributylstannylthiophene. The optical as well as the electrochemical properties of the compounds were investigated and compared to result of density functional theory (DFT) calculations. The influence of the thiophene substituents is discussed in dependence of the position at the aza-BODIPY core regarding the HOMO and LUMO frontier orbitals. The different distributions of the HOMO and LUMO coefficients over the BODIPY core lead to a variable influence of the thiophene substituents on the HOMO and LUMO energies, being the origin of the tunable optical and electrochemical properties.     

Synthesis and structural analysis of nonstoichiometric ternary fulleride K 1.5 Ba 0.25 CsC 60

The existence of cation-vacancy sites in fullerides might lead to long-range ordering and generate a new vacancy-ordered superstructure. The purpose of this work is to search whether or not long-range ordering of vacant tetrahedral sites, namely superstructure emerges in nonstoichiometric K _1.5 Ba _0.25 CsC ₆₀ fulleride. Therefore, K _1.5 Ba _0.25 CsC ₆₀ with cation-vacancy sites is synthesized using a precursor method to avoid inadequate stoichiometry control and formation of impurity phases within the target composition. For this purpose, first, phase-pure K ₆ C ₆₀ , Ba ₆ C ₆₀ and Cs ₆ C ₆₀ precursors are synthesized. Stoichiometric quantities of these precursors are used for further reaction with C ₆₀ to afford K _1.5 Ba _0.25 CsC ₆₀ . Rietveld analysis of the high-resolution synchrotron X-ray powder diffraction data of the precursors and K _1.5 Ba _0.25 CsC ₆₀ confirms that K ₆ C ₆₀ , Ba ₆ C ₆₀ and Cs ₆ C ₆₀ are single-phase and they crystallize in a body-centered-cubic structure ( Im 3) as reported in the literature. The analysis also shows that K _1.5 Ba _0.25 CsC ₆₀ phase can be perfectly modeled using a face-centered cubic structure. No new peaks appear which could have implied the appearance of a superstructure. This suggests that there is no long-range ordered arrangement of vacant tetrahedral sites in K _1.5 Ba _0.25 CsC ₆₀ .     

Synthesis and electronic properties of monodisperse oligophenothiazines

Starting from N-hexylphenothiazine, a versatile construction kit of brominated and borylated phenothiazines can be easily prepared by a sequence of bromination, bromo-lithium exchange/borylation, and Suzuki coupling. Subsequent Suzuki arylation of the building blocks gives soluble, monodisperse, and structurally well defined oligophenothiazines in good yields. The molecular weights at the peak maximum (Mp), obtained by GPC (gel permeation chromatography), and the actual molecular weights of the oligomer series, obtained by mass spectrometry, show excellent correlation. A QM/MM conformational analysis for the complete series reveals that the obvious butterfly-shaped phenothiazine structure multiplies and significantly reduces the hydrodynamic volume of the oligomers. The electronic properties (absorption and emission spectroscopy and cyclic voltammetry) give reasonable correlations with the chain length. With regard to the emission maxima, the effective conjugation length is already reached with the hexamer. Oligophenothiazines are highly fluorescent, with high fluorescence quantum yields, and are simultaneously highly electroactive, with low oxidation potentials.     

Derivatization of valproic acid using ferrocene derivatives: Synthesis,characterization and investigation of optical and electrochemical properties

New ferrocenyl‐based valproic acid (VPA) ester derivatives were designed and synthesized according to the reaction of appropriate haloalkylferrocene derivatives with VPA in the presence of K₂CO₃ and a catalytic amount of 18‐crown‐6 ether. Elemental analyses and Fourier transform infrared, ¹H NMR, ¹³C NMR and mass spectra all well confirmed the predicted molecular structure. This is the first report in which ferrocene has been applied in derivatization of VPA as a chromogenic group. The electrochemical properties of the synthesized compounds were studied using cyclic voltammetry measurements, and energies of the frontier molecular orbitals were determined. In addition, the solubilities of the final compounds were studied in distilled water, phosphate buffer (pH = 7.4) and 0.9% (w/v) NaCl solution.     

Synthesis, electronic, and electro-optical properties of emissive solvatochromic phenothiazinyl merocyanine dyes

Phenothiazinyl merocyanine dyes with variable substitution patterns on the peripheral benzene ring were synthesized in good yields by Knoevenagel condensation of the corresponding phenothiazinyl aldehydes and N-methylrhodanine or indan-1,3-dione. The electronic properties were investigated by cyclic voltammetry, absorption, electro-optical absorption, and emission spectroscopy. All these merocyanines reveal reversible redox behavior that stems from the phenothiazinyl-centered oxidation to give stable radical cations. The redox potentials strongly correlate with Hammett σ(p) parameters. All merocyanines reveal large Stokes shifts. They also display a pronounced emissive solvatochromism, which is caused by large dipole moment changes upon excitation from the ground to the excited state. These findings are supported by solvatochromism studies and time-dependent DFT computations.     

Fluorescent and electrochromic aromatic polyamides with 4‐tert‐butyltriphenylamine chromophore

A new triphenylamine‐based aromatic dicarboxylic acid monomer, 4‐tert‐butyl‐4′,4″‐dicarboxytriphenylamine ( 2 ), was synthesized from the cesium fluoride mediated N,N‐diarylation reaction of 4‐tert‐butylaniline with 4‐fluorobenzonitrile and subsequent alkaline hydrolysis of the dinitrile intermediate. A series of six aromatic polyamides 4a‐4f with tert‐butyltriphenylamine groups was prepared from the newly synthesized dicarboxylic acid and various aromatic diamines. These polyamides were readily soluble in many organic solvents and could be solution‐cast into flexible and strong films. The glass‐transition temperatures of these polymers were in the range of 274–311 °C. These polymers exhibited strong UV‐vis absorption bands at 356–366 nm in NMP solution. Their photoluminescence spectra showed maximum bands around 433–466 nm in the blue region. Cyclic voltammograms of all the polyamides exhibited reversible oxidation redox couples in acetonitrile. The polyamide 4f, with tert‐butyltriphenylamine segment in both diacid and diamine residues, exhibited stable electrochromic characteristics with a color change from a colorless neutral form, through a green semioxidized form, to a deep purple fully oxidized form. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2798–2809, 2010     

Synthesis and properties of new aromatic polyamides with redox‐active 2,4‐dimethoxytriphenylamine moieties

A new triphenylamine‐based diamine monomer, 4,4′‐diamino‐2″,4″‐dimethoxytriphenylamine ( 2 ), was synthesized from readily available reagents and was reacted with various aromatic dicarboxylic acids to produce a series of aromatic polyamides ( 4a–h ) containing the redox‐active 2,4‐dimethoxy‐substituted triphenylamine (dimethoxyTPA) unit. All the resulting polyamides were readily soluble in polar organic solvents and could be solution cast into tough and flexible films. These polymers exhibited good thermal stability with glass transition temperatures of 243–289 °C and softening temperatures of 238–280 °C, 10% weight loss temperatures in excess of 470 °C in nitrogen, and char yields higher than 60% at 800 °C in nitrogen. The redox behaviors of the polymers were examined using cyclic voltammetry (CV). All these polyamides showed two reversible oxidation processes in the first CV scan. The polymers also displayed low ionization potentials as a result of their dimethoxyTPA moieties. In addition, the polymers displayed excellent stability of electrochromic characteristics with coloration change from a colorless neutral state to green and blue‐purple oxidized states. These anodically coloring polyamides showed high green coloration efficiency (CE = 329 cm²/C), high contrast of optical transmittance change (ΔT% = 84% at 829 nm), and long‐term redox reversibility. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3392–3401, 2010     

Nucleophilic substitution reactions of monofunctional nucleophilic reagents with cyclotriphosphazenes containing 2,2-dioxybiphenyl units

The nucleophilic substitution reactions of mono- and bis-spiro-2,2′ -dioxybiphenyl cyclotriphosphazenes (3 and 4) with cyclopropanemethylamine (5) and aniline (6) were performed in the presence of trimethylamine in THF. Five novel cyclopropanemethylamino- and anilino-substituted spiro-2,2′ -dioxybiphenyl cyclotriphosphazene derivatives (7–11) were obtained from these reactions. The molecular structures of the new cyclotriphosphazene derivatives (7–11) were characterized by elemental analysis, MALDI-TOF MS, FT-IR, and NMR ( ³¹ P and ¹ H) spectroscopies. The structure of the spiro-(2,2′ -dioxybiphenyl)-bis-(anilino)-cyclotriphosphazene (11) was also determined by single-crystal X-ray crystallography.     

Tetrasubstituted Peropyrenes Formed by Reductive Aromatization: Synthesis,Functionalization and Characterization

The chromophore class of 1,3,8,10-tetrasubstituted peropyrenes was effectively synthesized from peropyrenequinone via a Zn-mediated reductive aromatization approach. In one step, a symmetric functionalization of the peropyrene backbone introducing silylethers ( 2 , 3 ), pivaloyl ( 4 ), triflyl ( 5 ) and also phosphinite ( 6 ) groups was established. Furthermore, the potential of using 4 and 5 in transition metal catalysed cross couplings was explored leading to 1,3,8,10-tetraaryl ( 8 - 11 ) and tetraalkynyl ( 7 ) peropyrenes. The influence of various substituents on the optoelectronic properties of these π-system extended peropyrenes was investigated in solid state by means of X-ray crystallography, in solution by means of UV-Vis and fluorescence spectroscopy and by their redox properties studied via cyclic voltammetry. By comparison with DFT and TD-DFT calculations, it could be elucidated that introduction of a broad variety of substituents in such versatile one or two step procedures leads to peropyrenes with easily tunable HOMO and LUMO energies ranging in a gap window of 0.8 eV. The frontier molecular orbital energies identify the target molecules as promising candidates for hole transporting semiconductors.     

2,3-二硫苄基-6,7-二(2-氰基乙硫基)四硫富瓦烯的合成及其性质研究

设计合成了2,3-二硫苄基-6,7-二(2-氰基乙硫基)四硫富瓦烯. 以UV-Vis, ¹H NMR, IR, MS和元素分析进行了表征, 测定了产物的循环伏安图. 运用Gaussian 98量子化学程序包, 采用密度泛函 (DFT) 的方法, 在B3LYP/6-31G(d) 水平上对分子的几何构型进行了优化. 计算结果表明, 由于取代基的引入使体系的HOMO能量降低, 分子趋于稳定, 这与分子的设计是一致的.     

Highly Conjugated Bis(benzo[b]phosphole)-P-oxides: Synthesis and Electrochemical,Optical, and Computational Studies

The first examples of a π-conjugated benzo[b]phosphole P-oxide in which two phosphole P-oxide units are connected by a carbon-carbon double bond are described. The molecules are synthesized as E isomers with respect to the carbon-carbon double bond and exist as stable cis and trans isomers (chiral and meso one respectively) relatively to the two stereogenic P atoms. The optical and electrochemical properties of both isomers have been investigated by experiment and computations.     

二苯并四硫代富瓦烯类衍生物的合成和电化学行为

合成了四个二苯并四硫代富瓦烯(DB-TTF)的衍生物(3a～b, 4a～b), 给出了它们的核磁共振氢谱和碳谱, 质谱,紫外吸收光谱及元素分析等数据. 用=循环伏安法测定了它们的氧化电位, 并将此与DB-TTF的氧化电位作了比较.发现: 两端取代的硫酮基对分子体系的吸电子效应较强,会明显增大分子的第一氧化电位 , 而且会降低分子内的Coulomb作用力, 相比之下, 在四周顶点上取代的烷氧基对分子体系的给电子效应较弱.     

Synthesis of redox-active biscalix[4]quinones and their electrochemical properties

Biscalix[4]arenes, 7 and 8, have been synthesized by a one-pot coupling method and a stepwise approach, respectively. One-pot reaction in a pressurized vessel resulted in the symmetric biscalix[4]arene 7 in high yield. Oxidation of compounds 7 and 8 by Tl(CO₂CF₃)₃ in CF₃COOH yielded biscalix[4]quinones, 9 and 10, respectively. Preliminary electrochemical studies by cyclic voltammetry of 9 and 10 show significant changes of their voltammograms upon addition of Na⁺.     

Synthesis and Photophysical Properties of C60‐carbazole Adducts

Three C₆₀‐carbazole adducts have been synthesized by 1, 3‐dipolar cycloaddition reaction. Intramolecular energy/electron transfer from carbazole to C₆₀ was observed by steady‐state absorption and fluorescence spectra. The fluorescence spectra of these adducts were similar to each other and dependent on the excitation wavelength and solvent.     

Synthesis,structural and spectral properties of Au complexes: luminescence properties and their non‐covalent DNA binding studies

Gold complexes of 1,3‐ bis‐pyridylimidazolium chloride ( L1 ), 1,3‐bis‐[2,6‐diisopropylphenyl]imidazolium chloride ( L2 ) and 1,3‐bis‐[benzyl]benzimidazolium chloride ( L3 ) were synthesized and characterized by analytical methods. For the complexes, electronic spectral results show that there is a marked difference in the band feature observed in the spectra, ascribed to the greater relativistic effect of gold. In fluorescence studies, the complexes develop emission bands in the visible region (400–600 nm) after excitation at around 350 nm. Au complex–DNA binding was studied, and it was observed that genomic DNA isolated from the U373‐GB cell line was fragmented and in some cases degraded by the Au complexes. Furthermore, the intensity of the DNA band increased when concentration of the metal complex was augmented. This study shows that the DNA cleavage is mediated by the Au complex. Copyright © 2013 John Wiley & Sons, Ltd.     

Polymers of Carbonic Acid, 31. Cyclic Polycarbonates by Hydrolytic Polycondensation of Bisphenol‐A Bischloroformate

The hydrolytic polycondensation of bisphenol‐A bischloroformate in NaOH/CH₂Cl₂ was studied using triethylamine as the catalyst. Reaction conditions were optimized towards high molar masses. The isolated polycarbonates were characterized by means of SEC and MALDI‐TOF mass spectrometry. The fraction of cyclic polycarbonates strongly increased with higher molecular weights and in the best sample only cycles were detectable (up to 50 000 Da). The largest cycles can compete with cyclic DNS of microorganisms.     

Synthesis,characterization and redox properties of Ar–C=N→Ge←N=C–Ar containing system

1. Download : Download high-res image (59KB)
2. Download : Download full-size image