5-乙酰(苯甲酰)基-4-芳基-3,4-二氢嘧啶-2(1H)-酮的质谱裂解规律

利用飞行时间质谱仪的高分辨本领和离子阱串联质谱技术研究了5乙酰(苯甲酰)基4芳基3,4二氢嘧啶2(1H)酮(1-5)的电子轰击质谱的裂解规律.将所有质谱离子的精确质量数据经OpenLynx软件导出其分子离子和碎片离子的元素组成.根据质谱裂解规律,主要质谱离子得到了归属,并经离子阱串联质谱技术加以证实.化合物1-3的质谱出现了丰度很强的分子离子峰,其中1和3的分子离子为基峰,证明此类化合物的结构相当稳定.但4和5的分子离子峰却很弱(相对丰度在4%以下),这是由于嘧啶环4位上的苯环分别含有强吸电子基团-NO2(在苯环的间位才有此效应)和-Cl(苯环的2和4位均含有氯)所致.化合物1-5的主要裂解包括:分子离子失去芳基形成丰度很高的阳离子(M-Ar)+;分子离子失去羰基形成中等强度的阳离子(M-RCO)+;分子离子失去氢原子所产生的(M-H)+峰,以及消除中性分子NH=C=X的嘧啶环破裂裂解.此外,所有化合物在低质量区都发现明显的苯基阳离子Ph+(m/z77).并且还提出个别化合物的几个额外裂解过程为:化合物4(分子中苯环的3位上含有硝基)出现的基峰(M-OH)+;化合物5(分子中苯环的2和4位上都含有氯原子)出现了的基峰(M-Cl)+;化合物3和5分别出现了m/z238(16%)和m/z241(29%)的特征离子峰,它们由相应的离子消除中性分子四员内酰胺生成查耳酮离子,该离子具有共轭大Π键而稳定存在.     

5-乙氧羰基-4-取代-6-甲基-3,4-二氢嘧啶-2（1H）-酮的电子轰击飞行时间质谱表征

研究了一系列5-乙氧羰基-4-取代-6-甲基-3,4-二氢嘧啶-2(1H)-酮的电子轰击飞行时间质谱,建立了此类化合物的裂解方式和分子离子峰的强度规律.利用飞行时间质谱的中分辨能力,测得了各碎片离子的精确质量,这些数据经OpenLynx软件导出所有分子离子和碎片离子的元素组成.根据质谱裂解规律,主要质谱离子得到了归属.两类主要裂解途径为:对所有标题化合物,通过失去4位上的R1,酯基上的C2H4(麦氏重排)和H2O(通过环状六员过渡态)形成三种阳离子;对4-芳基化合物,通过失去EtCO2形成另一类阳离子.此外,还提出了个别化合物的一些重要裂解行为.     

Can (H2O) n (n = 1–2) as effective catalysts in the CH2OO + H2S reaction under tropospheric conditions?

The addition reaction of CH₂OO?+?H₂S → HSCH₂OOH without and with catalyst X (X?=?H₂O and (H₂O)₂) has been investigated by CCSD(T)-F12a/VTZ-F12//B3LYP/aug-cc-pVTZ method and canonical variational transition state theory with small curvature tunneling correction. When H₂O was introduced in the CH₂OO?+?H₂S reaction, it not only acts as a catalyst for producing HSCH₂OOH, but also plays as a reactant to forming HOCH₂OOH. The formation channel of HSCH₂OOH is more important than the formation channel of HOCH₂OOH with its calculated rate constant larger by 11.0–43.2 times within the temperature 280–320?K. Then, (H₂O)₂ catalysed CH₂OO?+?H₂S → HSCH₂OOH reaction has been taken into account with its rate lower 1.9–4.2 times than the reaction of CH₂OO?+?H₂S → HSCH₂OOH with water. Also, CH₂OO?+?H₂S with H₂O cannot compete with the CH₂OO?+?H₂S reaction without water. This is different from CH₂OO?+?(H₂O)₂ reaction, which is about 4 orders of magnitude larger than the rate constant for CH₂OO?+?H₂O reaction. Such discrepancy is possible because C(CH₂OO)···O(H₂O) interaction has been enhanced more obviously by H₂O as compared to that of C(CH₂OO)···O(H₂S) interaction.     

Three-component one-pot synthesis of 4,6-diarylpyrimidin- 2(1H)-ones under solvent-free conditions in the presence of sulfamic acid as a green and reusable catalyst

A rapid and efficient one-pot method for the synthesis of 4,6-diarylpyrimidin-2(1H)-ones and related heterocycles is described. The condensation of acetophenone derivatives, aldehydes and urea in the presence of sulfamic acid was employed to synthesize a variety of pyrimidinones in moderate to excellent yields. The scope and limitations of this method are described.     

Poly(4-vinylpyridine) supported acidic ionic liquid: A novel solid catalyst for the efficient synthesis of 2,3-dihydroquinazolin-4(1H)-ones under ultrasonic irradiation

A novel poly(4-vinylpyridine) supported acidic ionic liquid catalyst was synthesized by the reaction of 4-vinylpyridine with 1,3-propanesultone, followed by the polymerization and the addition of the heteropolyacid. Due to the combination of polymer features and ionic liquid, it acted as a heterogeneous catalyst to effectively catalyze the cyclocondensation reaction of anthranilamide with aldehydes under ultrasonic irradiation and afforded the corresponding 2,3-dihydro-4(1H)-quinazolinones compounds in good to excellent yields. In addition, the catalyst could be easily recovered by the filtration and reused six times without significant loss of catalytic activity. More importantly, the use of ultrasonic irradiation can obviously accelerate the reaction.     

A one-pot three-component synthesis of 4,6-diarylpyrimidin-2(1H)-ones (DAPMs) using atomized sodium in THF under sonic condition

A simple and an efficient procedure for the synthesis of 4,6-diarylpyrimidin-2(1H)-ones using atomized sodium/THF via a one-pot three-component Biginelli-like cyclocondensation of an aldehyde, a methyl ketone and urea under ultrasonic condition is developed. The method is mild and inexpensive; yields are high and the reactions go to completion within 10–15 min.     

Organic synthesis in water: a green protocol for the synthesis of 2-(cyclohexylamino)-3- aryl- indeno[1,2-b]furan-4-ones

Aldehydes, 1,3-indandione and cyclohexylisocyanide undergo smooth coupling-cyclization in water to produce the corresponding 2-(cyclohexylamino)-3-aryl- indeno [1,2-b] furan-4-ones in good yields. Water was used as a solvent to avoid the use of other highly toxic and environmentally unfavorable solvents for this synthesis.

---

Graphical Abstract  A simple and efficient synthesis of 2-(cyclohexylamino)-3-aryl- indeno[1,2-b]furan-4-ones was achieved via a one-pot three-component reaction of cyclohexylisocyanide, aldehydes, and 1,3-indandione in water for 5 h in good yields. zFX

     

A diversity oriented, microwave assisted synthesis of N-substituted 2-hydro-4-amino-pyrido[2,3-d]pyrimidin-7(8H)-ones

A protocol for the synthesis of N-substituted 2-hydro-4-amino-pyrido[2,3-d]pyrimidin-7(8H)-ones (11) is described. Thus, the formylation of a 2-aminopyridone 12 in 85% formic acid/Ac₂O, proceeding via in situ cyclization to the intermediate formamide 13, affords the corresponding 2-hydro-4-oxo-pyridopyrimidine 14, which is converted to a 4-chloro-pyridopyrimidine 15 upon treatment with POCl₃. The subsequent transformation to the title compounds is carried by treatment with the corresponding amine in MeOH under microwave irradiation conditions.     

高性能的钛掺杂O3相O3-Na1-xCr1-xTixO2(x=0, 0.03, 0.05)用于钠离子电池正极材料的研究

本文通过凝胶热聚合路线合成了层状的O3相正极材料Na_1-xCr_1-xTi_xO₂(x=0, 0.03, 0.05),采用X射线衍射、扫描电子显微镜来分析其晶体结构和微观形貌. 研究发现,适量的钛掺杂有助于形成更均匀的颗粒并且会改变样品的颜色. 作为钠离子电池正极材料,Na//Na_0.97Cr_0.97Ti_0.03O₂具有非常高的库伦效率(首次高于96%),并且在2.0-3.6 V的电化学窗口下,用0.2 C的倍率循环100次,只有4%的容量衰减;在32 C倍率下有110 mAh/g的比容量.     

Single boron atom anchored on graphitic carbon nitride nanosheet (B/g-C2N) as a photocatalyst for nitrogen fixation: A first-principles study

It is essential to explore high efficient catalysts for nitrogen reduction in ammonia production. Based on the first-principles calculation, we find that B/g-C₂N can serve as high performance photocatalyst in N₂ fixation, where single boron atom is anchored on the g-C₂N to form B/g-C₂N. With the introduction of B atom to g-C₂N, the energy gap reduces from 2.45 eV to 1.21 eV and shows strong absorption in the visible light region. In addition, N₂ can be efficiently reduced on B/g-C₂N through the enzymatic mechanism with low onset potential of 0.07 V and rate-determining barrier of 0.50 eV. The "acceptance-donation" interaction between B/g-C₂N and N₂ plays a key role to active N₂, and the BN₂ moiety of B/g-C₂N acts as active and transportation center. The activity originates from the strong interaction between 1π1π^* orbitals of N₂ and molecular orbitals of B/g-C₂N, the ionization of 1π orbital and the filling of 1π^* orbital can increase the N≡N bond length greatly, making the activation of N₂. Overall, this work demonstrates that B/g-C₂N is a promising photocatalyst for N₂ fixation.     

A reaction cell for time‐resolved in situ XAS studies during wet chemical synthesis: the Cu2(OH)3Cl case

The use of in situ time‐resolved dispersive X‐ray absorption spectroscopy (DXAS) to monitor the formation of Cu₂(OH)₃Cl particles in an aqueous solution is reported. The measurements were performed using a dedicated reaction cell, which enabled the evolution of the Cu K‐edge X‐ray absorption near‐edge spectroscopy to be followed during mild chemical synthesis. The formed Cu₂(OH)₃Cl particles were also characterized by synchrotron‐radiation‐excited X‐ray photoelectron spectroscopy, X‐ray diffraction and scanning electron microscopy. The influence of polyvinylpyrrolidone (PVP) on the electronic and structural properties of the formed particles was investigated. The results indicate clearly the formation of Cu₂(OH)₃Cl, with or without the use of PVP, which presents very similar crystalline structures in the long‐range order. However, depending on the reaction, dramatic differences were observed by in situ DXAS in the vicinities of the Cu atoms.     

Chloromethane surface chemistry on Fe3O4(1 1 1)-(2 × 2): A thermal desorption spectrometry comparison of CCl4, CBr2Cl2, and CH2Cl2

The surface chemistry of CBr₂Cl₂ on the Fe₃O₄(1 1 1)-(2 × 2) selvedge of single-crystal α-Fe₂O₃(0 0 0 1) has been investigated using temperature programmed reaction and desorption (TPR/D) measurements. The spectra obtained in this case show that strong chemisorption occurs and that a series of adsorbed halogenated reaction products are present. By comparison, studies of the adsorbed phase of CH₂Cl₂ show that only physisorption occurs. The TPR/D spectra of CBr₂Cl₂ show that dissociative formation of CCl₂ followed by its reaction with lattice oxygen is central to the monolayer reaction chemistry in this chloromethane. The branching ratios of the various desorbed products are compared with those obtained from CCl₄ adsorbed on the same (2 × 2) surface.     

Ionic liquid as an effective green media for the synthesis of (5Z, 8Z)-7H-pyrido[2,3-d]azepine derivatives and recycable Fe3O4/TiO2/multi-wall cabon nanotubes magnetic nanocomposites as high performance organometallic nanocatalyst

Molecular Diversity - In this research we investigated the preparation of new (5Z, 8Z)-7H-pyrido[2,3-d]azepine derivatives in high yields via multicomponent reaction of isatins, alkyl bromides,...     

Titanium dioxide doped with transition metals (MxTi1?xO2, M: Ni, Co): synthesis and characterization for its potential application as photoanode

This study presents the synthesis of TiO₂ doped with different amounts of Co and Ni, starting from a simple metallic titanium powder. A successful electrophoretic deposition of these materials on ITO electrodes was achieved for its potential application as photoanodes. EDX, diffuse reflectance UV–Vis spectroscopy, and XRD measurements gave information on the chemical composition of the material and the location of the Ni or Co within the crystal structure of TiO₂. Raman spectroscopy suggests that for a higher content of doping metal above a defined percentage, the formation of metal oxide is promoted. A preliminary study of photoelectrocatalytic orange dye degradation shows higher color removal efficiency as compared to the commercial TiO₂ material.     

Si(1 1 1)-H(1 × 1): A mirror for atoms characterized by AFM, STM, He and H2 diffraction

AFM, STM and diffraction of He and H₂ have been used to assess Si(1 1 1)-H(1 × 1) surfaces for their potential as mirrors for matter-waves. The H-passivated samples are produced by wet-chemical methods and delivered to a different laboratory for diffraction measurements. We show that the surface is flat and homogenous over lateral scales of microns and that absolute He and H₂ reflectivities of the order of ∼3% are obtained, even after 20 h storage under Ar and several days’ storage in UHV. These characteristics allow the use of Si(1 1 1)-H(1 × 1) as a highly reflective mirror for atoms and molecules, with application in a future He microscope or focused hydrogen nano-lithography system.     

Binding sites for SiH2/Si(0 0 1): A combined ab initio, tight-binding, and classical investigation

Binding sites for SiH₂ on Si(0 0 1) are investigated theoretically by using several different methods. Possible local minima are first sampled by classical molecular dynamics simulations of the SiH₂/Si(0 0 1) impact, allowing for a preliminary, fast selection. A further refinement is carried out by geometry optimizations using semiempirical tight-binding and density functional theory calculations, based on both the local density and generalized gradient approximations. In most cases only minor morphological changes are obtained when comparing the ab initio sites with the classical potentials and tight-binding ones. The purely classical treatments here tested, however, overestimate the number of minima and fail in accurately reproducing the relative energy of some of the adsorption sites. Closer agreement is obtained with tight-binding, with the noticeable exception of the lowest ab initio minimum (on-dimer site).