五氧化二铌在沸石表面的分散和助剂效应

采用固-固研磨焙烧方法制备了分散型的Nb_2O_5/ZSM-48催化剂母体,XRD和SEM鉴定结果表明,在一定负载量内,Nb_2O_5可均匀地分散于ZSM-48沸石载体表面。由于Nb_2O_5的引入,改变了载体表面性质,同时也改善了Fe-K-Nb_2O_5/ZSM-48催化剂的还原及对CO和H_2的吸附性能,其结果促进了一氧化碳加氢反应的进行和低碳烯烃反应产物的生成,同时提高了催化剂的稳定性。     

溶剂化金属原子浸渍法制备高分散负载型催化剂——Ⅹ.K-Fe/硅沸石催化剂在CO/H_2合成低碳烯烃反应中的催化性能

溶剂化金属原子浸渍(SMAI)法是制备高分散负载型催化剂的一种新方法,它可减少活性组分在载体表面的聚集,使金属组分得到均匀分散,绝大多数金属颗粒的粒度小于25A,且粒度分布范围较窄。以前的工作大多选用Al_2O_3、MgO和SiO_2等无机氧化物或活性炭作为催化剂载体,载体多为无孔或微孔材料,载体的比表面限制了活性组分的负载量及分散度。本文采用憎水、亲有机物的中孔(5—6A)硅沸石作为载体,以溶剂化金属原子浸渍法制备了K-Fe/硅沸石,作为CO加氢合成低碳烯烃反应的催化剂,由于SMAI催化剂活性组份高度分散,同时沸石载体孔道具有良好的择形效应,从而有利于CO的转化和低碳烯烃的生成。     

负载型Co/AlPO_4-5催化剂的酸性及催化性能

美国联合碳化物公司首次合成出的AlPO_4-5分子筛属六方晶系,由PO_4及AlO_4四面体单元交替组成的中性骨架构成,具有直孔道结构,孔径为0.8nm,热稳定好,但无离子交换能力,表面不具B酸,L酸也较少,不宜直接作酸性催化剂.但是它负载了金属及金属氧化物后,在裂解、加氢裂解、重整、异构化、加氢异构化及歧化等反应中都有一定的活性及选择性.专利也曾报导,AlPO_4-5经改性后渗合到沸石中用于裂解反应,可提高油品性能.     

PtSnNa/SUZ-4:丙烷脱氢反应的高效催化剂

丙烷脱氢制丙烯是优化利用炼厂气和油田伴生气资源的一条重要途径.随着丙烯需求量的逐步增加,丙烷脱氢制丙烯日益受到重视.负载型PtSn/γ-Al2O3催化剂具有优良的丙烷脱氢活性和选择性,但在高温、低氢压的反应条件下,催化剂易积炭而失活.近年来,选用了微孔分子筛如ZSM-5和介孔分子筛如SBA-15和MCM-41作为PtSn催化剂的载体,结果表明,具有规整孔道结构的负载型PtSn/分子筛催化剂的丙烷脱氢反应稳定性明显优于PtSn/γ-Al2O3催化剂.SUZ-4分子筛与ZSM-5分子筛结构相似且孔径相当,所不同的是ZSM-5由十元环交叉孔道组成,而SUZ-4由十元环和八元环孔道垂直相交组成.我们用微型催化反应装置结合XRD、BET比表面积和孔体积测试、NH3吸附-程序升温脱附(NH3-TPD)、氢化学吸附、热重分析(TG)、H2程序升温还原(H2-TPR)和程序升温氧化(TPO)等多种物理化学手段研究了负载型PtSnNa/SUZ-4和PtSnNa/ZSM-5催化剂的结构和丙烷脱氢反应性能,以及这两种催化剂在丙烷脱氢反应中催化性能差异的原因.实验结果显示,在丙烷脱氢反应中,负载型PtSnNa/SUZ-4催化剂上丙烯选择性和反应稳定性明显优于PtSnNa/ZSM-5催化剂,说明载体一定程度上会影响催化剂上丙烷脱氢反应性能.XRD,BET比表面积和孔体积测试等表征手段结果表明,SUZ-4和ZSM-5的孔体积和比表面积比较接近,载体的结构又类似,且两者的积碳量也相近,故载体的基本性质和积碳量的差异不是引起催化剂性能差异的原因.NH3-TPD结果表明,H-SUZ-4的酸强度明显强于H-ZSM-5.由于浸渍法制备负载型PtSn催化剂所用前体为具有强酸性的混合溶液(H2PtCl6+SnCl4),存在于SUZ-4分子筛孔道内表面的强酸中心不利于上述前体与SUZ-4分子筛孔道内表面结合.ZSM-5分子筛孔道内表面比较弱的强酸中心,促进了催化剂前体在ZSM-5分子筛孔道内表面的分散与结合.和ZSM-5为载体的催化剂相比,PtSnNa/SUZ-4上Pt粒子大部分分散在载体的外表面,从而金属上的积碳不易引起催化剂的失活.故多孔材料上Pt的分布是影响催化活性差异的主要原因.为进一步证明多孔材料上Pt的分布是影响催化活性差异的主要原因,我们通过二苯并噻吩预处理催化剂的手段证明Pt粒子在分子筛孔内外的分布情况.由于二苯并噻吩的尺寸比较大(0.8 nm)不能进入到分子筛的孔道内(SUZ-4:0.56 nm,ZSM-5:0.56 nm),所以载体孔道外的部分Pt会被二苯并噻吩预处理而失去活性,而孔道内的Pt不会因为预处理仍具有催化活性.实验结果表明,PtSnNa/SUZ-4经过二苯并噻吩预处理后,催化活性大大降低;而PtSnNa/ZSM-5经过二苯并噻吩预处理后,催化活性几乎没有变化.说明PtSnNa/SUZ-4上Pt粒子大部分分散在载体的外表面,从而金属上的积碳不易引起催化剂的失活.     

PtSnNa/SUZ-4:丙烷脱氢反应的高效催化剂（英文）

丙烷脱氢制丙烯是优化利用炼厂气和油田伴生气资源的一条重要途径.随着丙烯需求量的逐步增加,丙烷脱氢制丙烯日益受到重视.负载型PtSn/γ-Al_2O_3催化剂具有优良的丙烷脱氢活性和选择性,但在高温、低氢压的反应条件下,催化剂易积炭而失活.近年来,选用了微孔分子筛如ZSM-5和介孔分子筛如SBA-15和MCM-41作为PtSn催化剂的载体,结果表明,具有规整孔道结构的负载型PtSn/分子筛催化剂的丙烷脱氢反应稳定性明显优于PtSn/γ-Al_2O_3催化剂.SUZ-4分子筛与ZSM-5分子筛结构相似且孔径相当,所不同的是ZSM-5由十元环交叉孔道组成,而SUZ-4由十元环和八元环孔道垂直相交组成.我们用微型催化反应装置结合XRD、BET比表面积和孔体积测试、NH_3吸附-程序升温脱附(NH_3-TPD)、氢化学吸附、热重分析(TG)、H_2程序升温还原(H_2-TPR)和程序升温氧化(TPO)等多种物理化学手段研究了负载型PtSnNa/SUZ-4和PtSnNa/ZSM-5催化剂的结构和丙烷脱氢反应性能,以及这两种催化剂在丙烷脱氢反应中催化性能差异的原因.实验结果显示,在丙烷脱氢反应中,负载型PtSnNa/SUZ-4催化剂上丙烯选择性和反应稳定性明显优于PtSnNa/ZSM-5催化剂,说明载体一定程度上会影响催化剂上丙烷脱氢反应性能.XRD,BET比表面积和孔体积测试等表征手段结果表明,SUZ-4和ZSM-5的孔体积和比表面积比较接近,载体的结构又类似,且两者的积碳量也相近,故载体的基本性质和积碳量的差异不是引起催化剂性能差异的原因.NH_3-TPD结果表明,H-SUZ-4的酸强度明显强于H-ZSM-5.由于浸渍法制备负载型PtSn催化剂所用前体为具有强酸性的混合溶液(H_2PtCl_6+SnCl_4),存在于SUZ-4分子筛孔道内表面的强酸中心不利于上述前体与SUZ-4分子筛孔道内表面结合.ZSM-5分子筛孔道内表面比较弱的强酸中心,促进了催化剂前体在ZSM-5分子筛孔道内表面的分散与结合.和ZSM-5为载体的催化剂相比,PtSnNa/SUZ-4上Pt粒子大部分分散在载体的外表面,从而金属上的积碳不易引起催化剂的失活.故多孔材料上Pt的分布是影响催化活性差异的主要原因.为进一步证明多孔材料上Pt的分布是影响催化活性差异的主要原因,我们通过二苯并噻吩预处理催化剂的手段证明Pt粒子在分子筛孔内外的分布情况.由于二苯并噻吩的尺寸比较大(0.8 nm)不能进入到分子筛的孔道内(SUZ-4:0.56 nm,ZSM-5:0.56 nm),所以载体孔道外的部分Pt会被二苯并噻吩预处理而失去活性,而孔道内的Pt不会因为预处理仍具有催化活性.实验结果表明,PtSnNa/SUZ-4经过二苯并噻吩预处理后,催化活性大大降低;而PtSnNa/ZSM-5经过二苯并噻吩预处理后,催化活性几乎没有变化.说明PtSnNa/SUZ-4上Pt粒子大部分分散在载体的外表面,从而金属上的积碳不易引起催化剂的失活.     

单分散SiO2的焙烧温度对Rh基催化剂上CO加氢反应性能的影响

在比较了分别以商业SiO2和采用Sto?ber法制备的单分散SiO2为载体的Rh-Mn-Li/SiO2催化剂催化CO加氢反应性能的基础上,进一步调变了Stober法制备SiO2时的焙烧温度,并考察了其对Rh-Mn-Li/SiO2催化CO加氢性能的影响.利用N2吸附-脱附、傅里叶变换红外(FTIR)光谱、H2程序升温还原(H2-TPR)、程序升温表面反应(TPSR)等方法对载体及催化剂的物理化学性能进行了表征.结果表明:不同温度焙烧的载体表面具有不同的Si―OH数量,从而影响金属的分散状态及Rh和Mn之间的相互作用.载体表面较多的羟基有利于Rh的分散和CO的吸附,从而增强催化剂的反应活性.载体表面适当数量的羟基能够得到适中的Rh与Mn之间的相互作用,使催化剂具有合适的CO解离能力,有利于CHx的CO插入反应,从而提高了C2含氧化合物的选择性.     

不同晶粒ZSM-5沸石分子筛对合成气羰基化反应性能的影响

对沸石分子筛而言,分子筛的孔道、孔径、孔容和微孔等物理性质和酸性影响它的活性.通过调节和控制以上物理性质能够提高产物选择性和收率,降低副产物,从而促进反应性能提高活性.我们考察了ZSM-5分子筛的晶粒度和硅铝比对合成气羰基化反应性能的影响.结果表明,晶粒度小及具有一定比例的中强酸中心的ZSM-5沸石分子筛对反应有利,但晶粒度比较大即1和3μm的ZSM-5沸石分子筛目标产物选择性比较低.纳米级的ZSM-5沸石分子筛催化剂在反应中表现出较高的活性及较低的副产物选择性,是适宜的合成气羰基化反应催化剂载体.温度考察结果可知,反应温度为300℃时,效果为最佳.其中, 30～50 nm的ZSM-5沸石分子筛催化剂CO转化率为55%,乙酸甲酯和甲酸甲酯选择性之和为52%,而晶粒度3μm时, CO转化率仅为25%,乙酸甲酯和甲酸甲酯选择性之和为20%,是30～50 nm沸石分子筛的一半.当反应继续升温时,副产物的选择性也随之增加,是因为所生成的中间产物和甲醇等继续进行各种反应生成二甲醚、芳烃、烷烃以及裂解生成CO_2等干气.     

沸石配位阳离子对Pd/H-ZSM-5催化剂加氢性能的影响

选用商业多级孔NH_4-ZSM-5和H-ZSM-5(NH_4-ZSM-5在550℃空气气氛中焙烧6 h)沸石为载体,H_2PdCl_4为金属前驱物,采子能谱、氨气-程序升温脱附和透射电子显微镜等手段对所制备催化剂的物化性质进行详细表征,并对Pd/H-ZSM-5的萘加氢催化性能进行了考察。结果表明,ZSM-5载体上配位的NH_4~+的存在不仅有利于负载金属Pd物种的分散,使Pd在NH_4-ZSM-5载体上具有较高的分散度,而且所制备的Pd/H-ZSM-5(NH_4)较Pd/H-ZSM-5(H)具有更多的酸位。Pd/H-ZSM-5(NH_4)在萘加氢反应中表现出比Pd/H-ZSM-5(H)更优异的催化性能。     

磷酸铝基分子筛研究进展

美国联合碳化物公司Flanigen研究中心1982年首次公布无硅骨架氧化物——AlPO_4系列分子筛。在已合成出的二十种磷酸铝晶体中有六种二维结构和与沸石相同骨架结构的AlPO_4—17(毛沸石)及AlPO_4-20(方钠石)、新型结构AlPO_4-5、-11、-14、-16、-18、-31等十四种三维结构。它们内径孔体积从0.04—0.35cm~3/克,孔径从0.3—0.8?。AlPO_4系列     

载Ni磷酸铝分子筛的催化活性

研究了新型磷酸铝分子筛AlPO_4-11的催化活性。磷酸铝分子筛经过改性或负载一些加氢助剂则其正己烷裂化活性大为提高,催化活性大小次序为Ni/AlPO_4-11>F-AlPO_4-11>AlPO_4-11,而Ni/AlPO_4-11的催化活性随载Ni量增加而增加,随还原温度升高而递减。预处理温度对Ni/AlPO_4-11的催化活性有显著的影响,于500℃空气中焙烧5小时,Ni/AlPO_4-11的催化活性比未改性的AlPO_4-11活性大,而比未焙烧的Ni/AlPO_4-11的活性小。从磷酸铝分子筛的TPD谱线获得它们的相应酸量和酸强度,可对其催化活性作一些定性的解释。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.