A first principles study of cubic IrO<Subscript>2</Subscript> polymorph

We have studied structural, thermodynamic, elastic, and electronic properties of cubic IrO₂ polymorph via ab initio calculations within the LDA and GGA approximations. Basic physical properties, such as lattice constant, bulk modulus, second-order elastic constants (C_ij), and the electronic band structures are calculated, and compared with available experimental values. We have, also, predicted the Young's modulus, Poison's ratio (ν), Anisotropy factor (A), sound velocities, and Debye temperature.     

The first principles study on the Boron antimony compound

We present the results of our calculations on Boron antimony (BSb) compound in zinc-blende (ZB) and rock-salt (RS) structures by performing ab initio calculations within the local density approximation (LDA). Some basic physical properties, such as lattice constant, bulk modulus, cohesive energy, phase transition pressure, second-order elastic constants (C_ij), phonon frequencies, and some band structural parameters are calculated and compared with those obtained with other recent theoretical works. In order to further understand the behaviour of BSb compound, we have also predicted, the pressure-dependent behaviours of the band gap, second-order elastic constants (C_ij), Young's modulus, poison ratios (ν), Anizotropy factor (A), sound velocities, and Debye temperature for this hypothetical compound.     

First-principles study of structural,elastic, electronic and thermodynamic properties of topological insulator Bi2Se3 under pressure

The structural, elastic, electronic and thermodynamic properties of the rhombohedral topological insulator Bi₂Se₃ are investigated by the generalized gradient approximation (GGA) with the Wu–Cohen (WC) exchange-correlation functional. The calculated lattice constants agree well with the available experimental and other theoretical data. Our GGA calculations indicate that Bi₂Se₃ is a 3D topological insulator with a band gap of 0.287 eV, which are well consistent with the experimental value of 0.3 eV. The pressure dependence of the elastic constants C_ij, bulk modulus B, shear modulus G, Young’s modulus E, and Poisson’s ratio σ of Bi₂Se₃ are also obtained successfully. The bulk modulus obtained from elastic constants is 53.5 GPa, which agrees well with the experimental value of 53 GPa. We also investigate the shear sound velocity V_S, longitudinal sound velocity V_L, and Debye temperature Θ_E from our elastic constants, as well as the thermodynamic properties from quasi-harmonic Debye model. We obtain that the heat capacity C_v and the thermal expansion coefficient α at 0 GPa and 300 K are 120.78 J mol^?1 K^?1 and 4.70 × 10^?5 K^?1, respectively.     

Theoretical investigations of NiTiSn and CoVSn compounds

The structural, elastic and electronic properties of NiTiSn and CoVSn half-Heusler compounds have been calculated using the full-potential linear muffin-tin orbital (FP-LMTO) method. The computed equilibrium lattice constants are in excellent agreement with the available experimental and theoretical data. The elastic constants C_ij are calculated using the total energy variation with strain technique. The polycrystalline elastic moduli (namely: the shear modulus, Young's modulus, Poisson's ratio, Lamé's coefficients, sound velocities and the Debye temperature) were derived from the obtained single-crystal elastic constants. The ductility mechanism for the studied compounds is discussed via the elastic constants C_ij and their related parameters. The electronic band structure calculations show that the conduction band minimum (CBM) is located at the X point for both compounds, whereas the valence band maximum (VBM) is located at the Г point for NiTiSn and at the L point for CoVSn, resulting in indirect energy band gaps of 0.46 and 0.75 eV for NiTiSn and CoVSn, respectively. The pressure and volume dependences of the energy band gaps have been calculated.     

Structural, electronic, elastic and optical properties of fluoro-perovskite KZnF3

We determine the structural, electronic, elastic and optical properties of fluoro-perovskite KZnF₃ using the full potential linear augmented plane wave approach (FP-LAPW) based on the density functional theory (DFT). The exchange-correlation potential is treated by the local density approximation (LDA) and the generalized gradient approximation (GGA). The calculated structural parameters are in good agreement with the available data. We have obtained an indirect band gap. The effect of the pressure on the band gaps is investigated. We evaluate the elastic constants (C_ij), elastic moduli and the Debye temperature. The imaginary and the real parts of the dielectric function ε(ω) and some optical constants are also calculated.     

The mechanical,thermodynamic and electronic properties of Al3Nb with DO22 structure: A first-principles study

The lattice constants, elastic properties, electronic structure and thermodynamic properties of Al₃Nb with DO₂₂ structure have been investigated by the first-principles calculation. The calculated lattice constants were consistent with the experimental values, and the structural stability was also studied from the energetic point of view. The single-crystal elastic constants (C_ij) as well as polycrystalline elastic parameters (bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio υ and anisotropy value A) were calculated, and brittleness of Al₃Nb was discussed in detail. Besides, the electronic structure of tetragonal Al₃Nb was studied, which indicates a mixture of metallic bond and covalent bond in Al₃Nb and reveals the underlying mechanism of the stability and elastic properties of Al₃Nb. Finally, the thermodynamic properties of Al₃Nb were calculated and the physical properties such as heat capacity and Debye temperature were predicted within the quasi-harmonic approximation.     

Elastic constants and Debye temperature of wz-AlN and wz-GaN semiconductors under high pressure from first-principles

First-principles calculations were performed to study the elastic stiffness constants (C _ij ) and Debye temperature (?? _D) of wurzite (wz) AlN and GaN binary semiconductors at high pressure. The lattice constants were calculated from the optimized structure of these materials. The band gaps were calculated at Γ point using local density approximation (LDA) approach. The unit cell volume, lattice parameters, c/a, internal parameter (u), elastic constant (C _ij ), Debye temperature (?? _D), Hubbard parameter (U) and band gap (E _g) were studied under different pressures. The bulk modulus (B ₀), reduced bulk modulus ( \(B_{0}^{\prime })\) and Poisson ratio (υ) were also calculated. The calculated values of these parameters are in fair agreement with the available experimental and reported values.     

First-principles investigations on elastic, phonon and thermodynamic properties of SrB6 under pressure

The elastic, phonon and thermodynamic properties of the divalent alkaline-earth hexaboride SrB₆ are investigated by using plane-wave pseudopotential density functional theory method. The calculated structure parameters and bulk modulus are well consistent with the available experiment and theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B₀, shear modulus G, Young's modulus E and Poisson's ratio σ are also presented. With these elastic parameters, we investigate the mechanical stability and compressibility of SrB₆. For the thermodynamic properties, both phonon and quasi-harmonic Debye model methods are adopted. Through the comparison with experimental and other theoretical results, we found the method of quasi-harmonic Debye model is a little better. Moreover, the phonon dispersion relations are also obtained. It is found that there are two LO/TO splitting around 5 THz and 26 THz, respectively.     

FP-LMTO calculations of the structural,elastic, thermodynamic,and electronic properties of the ideal-cubic perovskite BiGaO3

Using the first-principles full-potential linear muffin-tin orbital method within the local density approximation, we have studied the structural, elastic, thermodynamic, and electronic properties of the ideal-cubic perovskite BiGaO₃. It is found that this compound has an indirect band gap. The valence band maximum (VBM) is located at Γ-point, whereas the conduction band minimum (CBM) is located at X-point. The pressure and volume dependences of the energy band gaps have been calculated. The elastic constants at equilibrium are also determined. We derived the bulk and shear moduli, Young’s modulus, and Poisson’s ratio. The thermodynamic properties are predicted through the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variation of the bulk modulus, heat capacities, and Debye temperature with pressure and temperature are successfully obtained.     

Pressure effects on structural,elastic and electronic properties of BaZnO2: first-principles study

The structural, elastic and electronic properties of BaZnO₂ under pressure are investigated by the plane wave pseudopotential density functional theory (DFT). The calculated lattice parameters and unit cell volume of BaZnO₂ at the ground state are in good agreement with the available experimental data and other theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B, shear modulus G, B/G, Poisson’ s ratio σ, Debye temperature Θ and aggregate acoustic velocities V_P and V_S are systematically investigated. It is shown that BaZnO₂ maintains ductile properties under the applied pressures. Analysis for the calculated elastic constants has been made to reveal the mechanical stability and mechanical anisotropy of BaZnO₂. At the ground state, the calculated compressional and shear wave velocities are 8.26 km/s and 1.81 km/s, respectively, and the Debye temperature Θ is 240.8 K. The pressure dependences of the density of states and the bonding property of BaZnO₂ are also investigated.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

Structural,elastic and thermodynamic properties of tetragonal and orthorhombic polymorphs of Sr2GeN2: an ab initio investigation

The structural, elastic and thermodynamic properties of the α (tetragonal) and β (orthorhombic) polymorphs of the Sr₂GeN₂ compound have been examined in detail using ab initio density functional theory pseudopotential plane-wave calculations. Apart the structural properties at the ambient conditions, all present reported results are predicted for the first time. The calculated equilibrium lattice parameters and inter-atomic bond-lengths of the considered polymorphs are in good agreement with the available experimental data. It is found that α-Sr₂GeN₂ is energetically more stable than β-Sr₂GeN₂. The two examined polymorphs are very similar in their crystal structures and have almost identical local environments. The single-crystal and polycrystalline elastic parameters and related properties – including elastic constants, bulk, shear and Young’s moduli, Poisson’s ratio, anisotropy indexes, Pugh’s criterion, elastic wave velocities and Debye temperature – have been predicted. Temperature and pressure dependence of some macroscopic properties – including the unit-cell volume, bulk modulus, volume thermal expansion coefficient, heat capacity and Debye temperature – have been evaluated using ab initio calculations combined with the quasi-harmonic Debye model.     

高温高压下Zr2AlC的结构及热学性质的第一性原理

利用密度泛函理论研究了高温高压下Zr₂AlC的结构和热力学性质,计算得到Zr₂AlC的晶格参数与实验值符合较好．研究了Zr₂AlC的弹性常数、体模量、剪切模量和杨氏模量等力学性质随压力变化的趋势．同时研究了维氏硬度随压力的变化趋势．通过计算得到的杨氏模量预测了Zr₂AlC的弹性各向异性．最后,基于准简谐德拜模型,成功预测了Zr₂AlC的德拜温度、热容、热膨胀系数和Grüneisen参数随着压强和温度的变化关系.     

First principle calculation of elastic and thermodynamic properties of stishovite

Using ab initio plane-wave pseudo-potential density functional theory method,the elastic constants and band structures of stishovite were calculated.The calculated elastic constants under ambient conditions agree well with previous experimental and theoretical data.C13,C33,C44,and C66 increase nearly linearly with pressure while C 11 and C 12 show irregularly changes with pressure over 20 GPa.The shear modulus(C11-C12)/2 was observed to decrease drastically between 40 GPa and 50 GPa,indicating acoustic mode softening in consistency with the phase transition to CaCl 2-type structure around 50 GPa.The calculated band structures show no obvious difference at 0 and 80 GPa,being consistent with the high incompressibility of stishovite.With a quasi-harmonic Debye model,thermodynamic properties of stishovite were also calculated and the results are in good agreement with available experimental data.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

The structural, elastic and thermodynamic properties of intermetallic compound CeGa2

The structural, elastic and thermodynamic characteristics of CeGa₂ compound in the AlB₂ (space group: P6/mmm) and the omega trigonal (space group: P-3m1) type structures are investigated using the methods of density functional theory within the generalized gradient approximation (GGA). The thermodynamic properties of the considered structures are obtained through the quasi-harmonic Debye model. The results on the basic physical parameters, such as the lattice constant, the bulk modulus, the pressure derivative of bulk modulus, the phase-transition pressure (P _t ) from P6/mmm to P-3m1 structure, the second-order elastic constants, Zener anisotropy factor, Poisson’s ratio, Young’s modulus, and the isotropic shear modulus are presented. In order to gain further information, the pressure and temperature-dependent behavior of the volume, the bulk modulus, the thermal expansion coefficient, the heat capacity, the entropy, Debye temperature and Grüneisen parameter are also evaluated over a pressure range of 0–6 GPa and a wide temperature range of 0–1800 K. The obtained results are in agreement with the available experimental and the other theoretical values.     

Theoretical study on the phase stability,elasticity, hardness and electronic structures of Ni–P compounds

A systematic investigation concerned with phase stability, elastic properties, hardness and relevant electronic structure of Ni–P compounds (Ni₃P, Ni₁₂P₅, Ni₂P, Ni₅P₄, NiP, NiP₂ and NiP₃) was carried out using first principles calculations. The calculated results show that the Ni–P compounds have strong hardness, ranging from 7.80–14.54 GPa. Also, the hardness values gradually increase with the P content. Electronic structure analysis shows that the strong Ni–P and part of P–P hybrid orbitals play important roles in the hardness of these compounds. The calculated elastic constants indicated that the Ni₃P, Ni₁₂P₅ and NiP₂ phases are significantly anisotropic, the NiP and Ni₂P exhibit some anisotropy, while the Ni₅P₄ and NiP₃ show a relatively isotropic character. At last, the properties of these Ni–P compounds including lattice constants, thermodynamic stability, elastic constants C_ij, bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν have been calculated.     

Structural,elastic, electronic,optical and thermal properties of c-SiGe<Subscript>2</Subscript>N<Subscript>4</Subscript>

We have investigated the structural, elastic, electronic, optical and thermal properties of c-SiGe₂N₄ by using the ultrasoft pseudopotential density functional method within the generalized gradient approximation. The calculated structural parameters, including the lattice constant, the internal free parameter, the bulk modulus and its pressure derivative are in agreement with the available data. The independent elastic constants and their pressure dependence, calculated using the static finite strain technique, satisfy the requirement of mechanical stability, indicating that c-SiGe₂N₄ compound could be stable. We derive the shear modulus, Young’s modulus, Poisson’s ratio and Lamé’s coefficients for ideal polycrystalline c-SiGe₂N₄ aggregate in the framework of the Voigt-Reuss-Hill approximation. We estimate the Debye temperature of this compound from the average sound velocity. Band structure, density of states, Mulliken charge populations and pressure coefficients of energy band gaps are investigated. Furthermore, in order to understand the optical properties of c-SiGe₂N₄, the dielectric function, refractive index, extinction coefficient, optical reflectivity and electron energy loss are calculated for radiation up to 40 eV. Thermal effects on some macroscopic properties of c-SiGe₂N₄ are predicted using the quasi-harmonic Debye model in which the lattice vibrations are taken into account. We have obtained successfully the variations of the primitive cell volume, volume expansion coefficient, heat capacities and Debye temperature with pressure and temperature in the ranges of 0–40 GPa and 0–2000 K. For the first time, the numerical estimates of the elastic constants and related parameters, and the thermal properties are performed for c-SiGe₂N₄.     

Structural, electronic and elastic properties of Ti2TlC, Zr2TlC and Hf2TlC

Using First-principle calculations, we have studied the structural, electronic and elastic properties of M₂TlC, with M = Ti, Zr and Hf. Geometrical optimization of the unit cell is in good agreement with the available experimental data. The effect of high pressures, up to 20 GPa, on the lattice constants shows that the contractions are higher along the c-axis than along the a axis. We have observed a quadratic dependence of the lattice parameters versus the applied pressure. The band structures show that all three materials are electrical conductors. The analysis of the site and momentum projected densities shows that bonding is due to M d-C p and M d-Tl p hybridizations. The M d-C p bonds are lower in energy and stiffer than M d-Tl p bonds. The elastic constants are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young’s modulus and Poisson’s ratio for ideal polycrystalline M₂TlC aggregates. We estimated the Debye temperature of M₂TlC from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of Ti₂TlC, Zr₂TlC, and Hf₂TlC compounds that requires experimental confirmation.      

Theoretical investigations of structural, elastic and thermodynamic properties for PtN2 under high pressure

We have investigated structural and elastic properties of PtN₂ under high pressures using norm-conserving pseudopotentials within the local density approximation (LDA) in the frame of density-functional theory. Calculated results of PtN₂ are in agreement with experimental and available theoretical values. The a/a₀, V/V₀, ductility/brittleness, elastic constants C_ij, shear modulus C′, bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio σ and anisotropy factor A as a function of applied pressure are presented. Through the quasi-harmonic Debye model, we also study thermodynamic properties of PtN₂. The thermal expansion versus temperature and pressure, thermodynamic parameters X (X=Debye temperature or specific heat) with varying pressure P, and heat capacity of PtN₂ at various pressures and temperatures are estimated.