Fabrication of hydroxyl group modified monodispersed hybrid silica particles and the h-SiO(2)/TiO(2) core/shell microspheres as high performance photocatalyst for dye degradation

The monodisperse hybrid silica particles (h-SiO(2)) were firstly prepared by a modified sol-gel process and the surface was modified in situ with double bonds, then abundant carboxyl moieties were introduced onto the surface of the silica core via thiol-ene click reaction. Afterward, the h-SiO(2)/TiO(2) core/shell microspheres were prepared by hydrolysis of titanium tetrabutoxide (TBOT) via sol-gel process in mixed ethanol/acetonitrile solvent, in which the activity of TBOT could be easily controlled. The carboxyl groups on the surface of silica particles promote the formation of a dense and smooth titania layer under well control, and the layer thickness of titania could be tuned from 12 to 100nm. The well-defined h-SiO(2)/TiO(2) core/shell structures have been confirmed by electron microscopy and X-ray photoelectron spectroscopy studies. After calcination at 500°C for 2h, the amorphous TiO(2) layer turned into anatase titania. These anatase titania-coated silica particles showed good photocatalytic performance in degradation of methyl orange aqueous solution under UV light.     

Synthesis of Submicron-Sized Titania-Coated Silica Particles with a Sol-Gel Method and Their Application to Colloidal Photonic Crystals

A previously proposed method for preparing monodispersed titania particles was extended to preparation of titania-coated silica spherical particles. The core silica particles with an average size of 264 nm were prepared with Stöber method. The titania-coating was performed in ethanol/acetonitrile solvent in the presence of silica particles by a sol-gel method with the use of titanium tetraisopropoxide (TTIP) and methylamine (MA) catalyst. Average size of the silica-titania particles decreased from 457 to 292 nm with an increase in concentration of silica particles. Coefficient of variation for the particle size was less than 5%. Colloidal crystals could be fabricated with a dip-coating technique and a sedimentation process, respectively. Measurements of reflectance revealed peaks based on the Bragg diffraction. Those peaks red-shifted with an increase in titania shell thickness because of a high refractive index of titania. Annealing at high temperature transformed crystal structure of titania shell from amorphous to anatase (500°C) and rutile (1000°C), which led to red-shift of reflection peak because of an increase in refractive index of titania due to the crystallization.     

液相一步合成金红石型超细TiO2

二氧化钛在自然界中存在三种结晶形态:金红石型、锐钛矿型和板钛矿型.金红石型TiO₂因其折射率高,性能优越,因而得到广泛的应用^[1～3].传统金红石型TiO₂的制备需经高温固相反应,经历由无定形→锐钛矿→金红石的转化过程.     

Synthesis and characterization of nano titania powder with high photoactivity for gas-phase photo-oxidation of benzene from TiOCl(2) aqueous solution at low temperatures

Nano rutile, anatase, and bicrystalline (anatase + brookite) titania powders with an average crystal size of below 10 nm are prepared from aqueous TiOCl(2) solution at low temperatures by adjusting pH values of the starting solution and adding different additives. Adding a small amount of octyl phenol poly(ethylene oxide) into aqueous TiOCl(2) solution leads to the change of particle morphologies of obtained nano titania from needlelike to nano spherical rutile crystals. Amorphous-anatase transformation of titania could proceed in liquid-solid reaction at low temperatures, even at room temperature. A formation mechanism of rutile, anatase, and brookite titania was proposed. It is found that H(+) or H(3)O(+) plays a catalytic role in the phase transformation from amorphous to anatase titania and that the presence of a small amount of SO(4)(2)(-) ion is unfavorable to the formation of both rutile and brookite. By carefully adjusting preparation conditions, nano pure anatase with higher surface area, good crystallinity, and a lower recombination rate of photoexcited electrons and holes was obtained. This nano pure anatase showed a very good photocatalytic activity for gas-phase photo-oxidation of benzene.     

锐钛矿型纳米TiO2介孔粉体表面织构的研究

以硫酸钛和尿素为原料,聚乙二醇-1000为空间构造剂,104℃下经尿素水解均匀沉淀法研制颗粒分散均匀、粒径可控的高热稳定性锐钛矿型纳米TiO2介孔粉体,并对其晶相、颗粒大小、比表面积、形貌和孔道结构进行了表征.结果表明,未经任何热处理的TiO2粉体即为锐钛型晶相,颗粒为均匀分散的类球型颗粒,且颗粒间形成直通型的介孔孔道,其孔径在10～30nm之间.控制焙烧温度可以达到控制颗粒大小及形貌的目的,经850℃焙烧5h的样品仍保持锐钛矿型晶相,未出现向金红石型晶相转变的迹象.     

Close-packed colloidal crystalline arrays composed of silica spheres coated with titania

Titania coated monodisperse silica spheres have been synthesized and fabricated as a close-packed colloidal crystalline array. We have demonstrated that the coated colloidal sphere can be used to control the peak position of the optical stop band through variation of the coating thickness. The titania coated silica spheres were prepared by the layer-by-layer assembly coating process, which reciprocally laminates the cationic polyelectrolyte and the anionic titania nanosheets on a monodisperse silica spheres, and were sintered to change the titania nanosheets to anatase. The Bragg diffraction peak of the colloidal crystalline array shifted to the long wavelength region with an increase of thickness of the titania layer. Angle-resolved reflection spectra measurements clarified that the red shift was caused by increasing of the refractive index with increase of the thickness of the layer. The current work suggests new possibilities for the creation of advanced colloidal crystalline arrays with tunable optical properties from tailored colloidal spheres.     

Aerosol-assisted synthesis of mesoporous titania nanoparticles with high surface area and controllable phase composition

Mesoporous titania nanoparticles (denoted as MTN) with high surface area (e.g., 252 m² g⁻¹) were prepared using tetrapropyl orthotitanate (TPOT) as a titania precursor and 10–20 nm or 20–30 nm silica colloids as templates. Co-assembly of TPOT and silica colloids in an aerosol-assisted process and immediate calcination at 450 °C resulted in anatase/silica composite nanoparticles. Subsequent removal of the silica colloids from the composite by NaOH solution created mesopores in the TiO₂ nanoparticles with pore size corresponding to that of silica colloids. Effects of silica colloids’ contents on MTN porosity and crystallites’ growth at a higher calcination temperature (e.g., 1000 °C) were investigated. Silica colloids suppressed the growth of TiO₂ crystallites during calcination at a higher calcination temperature and controllable contents of the silica colloids in precursor solution resulted in various atomic ratios of anatase to rutile in the calcinated materials. The mesostructure and crystalline structure of these titania materials were characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), differential thermal analysis (DTA)-thermo-gravimetric analysis (TGA), and N₂ sorption.     

Spiky Mesoporous Anatase Titania Beads: A Metastable Ammonium Titanate‐Mediated Synthesis

A complex titania nanostructure of monodisperse spiky mesoporous anatase beads composed of anatase nanocrystals with diameters of less than 15 nm in the core and much larger hollow‐cone shaped spikes on the surface was fabricated using a facile solvothermal process in the presence of ammonia. This proceeded through a controllable phase transformation from an amorphous titania to a metastable amorphous titania/ammonium titanate core‐shell structure then finally to anatase titania. The size of the spiky anatase nanostructures can be increased from approximately 55×100 nm to 160×410 nm (square edge×length) by increasing the ammonia concentration used in the solvothermal treatment step from 2.2 to 17.4 wt. %. Such hollow‐cone shaped nanostructures, as revealed by HRTEM characterization, are single crystals elongated along the c axis of the tetragonal anatase titania. The resultant spiky titania beads have high surface areas of up to 112 m²g^?1 and pore diameters and pore volumes that vary depending on the ammonia concentration and solvothermal treatment time. The morphological evolution and crystallization process of the spiky titania beads was investigated using SEM and XRD techniques. A metastable amorphous titania/ammonium titanate core‐shell structure evolved from the smooth amorphous precursor beads producing a “fluffy” titanate intermediate, on further heating the final spiky mesoporous titania beads were clearly observed. This titanate‐phase‐mediated approach allows control over the size of the nanocrystals in the core of the bead, as well as the anatase spikes on the surface, and thereby, tuning of the surface area and porosity of the resultant products. The spiky mesoporous titania beads have been used to prepare working electrodes for dye‐sensitized solar cells achieving a solar to electric power conversion efficiency of 10.30 %, indicating their potential for application in the photovoltaic field. Such complex titania nanostructures would have a number of other possible applications, such as photocatalysis, lithium ion batteries, and catalysis.     

纳米TiO2低温水解法的晶型控制合成及其表面织构的研究

分别以TiCl₄，Ti(NO₃)₄和Ti(SO₄)₂为前驱体，在低温和强酸性条件下，通过水解反应可控地合成了具有不同晶相组成，且比表面积较高的纳米TiO₂，并用XRD，TEM和N₂^-吸附脱附技术对其晶相、粒径大小、形貌及比表面积进行了表征。结果表明，钛离子在有Cl^-、NO₃^-存在的酸性溶液中水解，水解温度≤80 ℃，可以生成结晶良好的具有细小晶粒尺寸和较高比表面积的金红石型纳米TiO₂粉体，水解温度>80 ℃，反而有锐钛矿型TiO₂生成，而在有SO₄^2-存在的酸性溶液中，TiO₂样品的晶相组成不随水解温度的变化而改变，均为锐钛矿型，其比表面积可达300 m²·g^-1。     

Temperature programmed desorption analysis of sol-gel-derived titania films

Sol-gel-derived titania films were analyzed by temperature programmed desorption (TPD) and X-ray diffraction (XRD) techniques. The relationship between the TPD curves measured for two types of titania gel films and their crystal structures was investigated. On the basis of the analyses, a preparation process for a titania sol solution containing anatase nanocrystals was designed and developed. Using this process, a colloidal anatase titania sol solution was prepared by heating aqueous titanium hydroxide containing HCl at 60°C for 2 h. The nanocrystal structure of the titania films obtained by coating the sol on glass substrates was confirmed by TPD and XRD measurements.     

Seeded growth of titania colloids with refractive index tunability and fluorophore-free luminescence

Titania is an important material in modern materials science, chemistry, and physics because of its special catalytic, electric, and optical properties. Here, we describe a novel method to synthesize colloidal particles with a crystalline titania, anatase core and an amorphous titania-shell structure. We demonstrate seeded growth of titania onto titania particles with accurate particle size tunability. The monodispersity is improved to such an extent so that colloidal crystallization of the grown microspheres becomes feasible. Furthermore, seeded growth provides separate manipulation of the core and shell. We tuned the refractive index of the amorphous shell between 1.55 and 2.3. In addition, the particles show luminescence when trace amounts of aminopropyl-triethoxysilane are incorporated into the titania matrix and are calcined at 450 °C. Our novel colloids may be useful for optical materials and technologies such as photonic crystals and optical trapping.     

Effect of synthesis conditions on the preparation of titanium dioxides from peroxotitanate solution and their photocatalytic activity

Nanosized TiO₂ particles were prepared by the hydrothermal method from the amorphous powders which were precipitated in an aqueous peroxotitanate solution. The physical properties of the nanosized TiO₂ particles prepared were investigated. We also examined the activity of TiO₂ particles as a photocatalyst on the decomposition of orange II. The titania sol can be successfully crystallized to the anatase phase through hydrothermal aging at temperatures higher than 160°C. The particle size increases from 18 to 26 nm as the synthesis temperature increases from 140 to 200°C. Titania particles prepared at 180°C show the highest activity, and titania particles calcined at 400°C show also the highest activity on the photocatalytic decomposition of orange II.     

Synthesis of silica–titania composite oxide via “green” aqueous peroxo-route

The preparation procedure of silica–titania composite oxide using novel solution/sol single precursor containing titanium peroxocomplex and silicic acid has been described. Pechini-type sol–gel process has been used to prepare oxides from the aqueous precursor. Some structural, morphological and textural characteristics of the prepared material have been presented. Composite SiO₂/TiO₂ has high surface area (c.a. 300 m²/g), and it is composed of anatase nanoparticles with the mean diameter of 5 nm embedded in amorphous silica, then TiO₂ prepared via similar method is presented as a mixture of anatase and rutile phases. The proposed synthetic procedure meets the requirements of “green chemistry”.     

Probing the surfaces of core‐shell and hollow nanoparticles by solvent relaxation NMR

Measurement of the spin–spin NMR relaxation time (or its inverse, the rate) of water molecules in aqueous nanoparticle dispersions has become a popular approach to probe of the nature and structure of the particle surface and any adsorbed species. Here, we report on the characterisation of aqueous dispersions of hollow amorphous nanoparticles that have two liquid accessible surfaces (inner cavity surface and outer shell surface) plus the solid (silica) and core‐shell (titania–silica) nanoparticle precursors from which the hollow particles have been prepared. In all cases, the observed water relaxation rates scale linearly with particle surface area, with the effect being more pronounced with increasing levels of titania present at the particle surface. Two distinct behaviours were observed for the hollow nanoparticles at very low volume fractions, which appear to merge with increasing surface area (particle concentration). Herewith, we further show the versatility of solvent NMR spectroscopy as a probe of surface character.     

单分散TiO2亚微米球的制备与表征

采用乙腈与乙醇混合溶剂体系制备出了单分散的亚微米级TiO2球形胶体颗粒, 并对乙腈相对含量以及实验温度等参数的影响进行了研究. 结果表明5 ℃下乙腈相对含量为70%时可制得高质量的单分散胶体颗粒. 通过TEM、SEM、粒度分析等表征手段, 表明所得胶体颗粒平均直径约为540 nm, 标准偏差在5%以内, 颗粒的多分布系数为0.013, TG-DSC分析表明胶体颗粒为含水量很少的水合TiO2; XRD分析表明单分散TiO2胶体颗粒在600 ℃高温烧结由无定型转变为锐钛矿型, 在900 ℃高温烧结则开始出现金红石型.     

Crystallization and photovoltaic properties of titania-coated polystyrene hybrid microspheres and their photocatalytic activity

The hybrid microspheres with polystyrene core coated by titania nanoparticles were prepared by miniemulsion polymerization, and the as-prepared samples were characterized by SEM, XRD, TG-DTA, XPS, and SPS techniques. TiO2 nanoparticles experienced two processes of phase transition, i.e., amorphous to anatase and anatase to rutile at the calcining temperature range from 400 to 1000 degrees C. The phase transformation temperature of TiO2 hybrid microspheres from anatase to rutile was increased by about 300 degrees C due to the blocking function of calcined polymer remainder. SPS results present that the band-gap of hybrid microspheres is 3.2-3.4 eV, which is larger than that of pure TiO2. The maximum intensity of the SPS signal is about 3 times larger for the hybrid material as compared to the pure TiO2. In addition, the photocatalytic degradation rate of TiO2 hybrid microspheres was 15% faster than that of pure TiO2 in the experiment of the photocatalytic degradation of methyl orange.     

不同形貌TiO2的水热合成及对苯酚的降解研究

采用水热合成法, 通过对溶液的pH值、反应物配比、陈化温度及陈化时间等条件的控制, 合成出不同晶型及形貌的TiO2纳米粒子. 结果表明, 溶液的pH＝11, n(钛酸丁酯):n(三乙醇胺)＝1:2, 陈化温度为150 ℃, 陈化时间为48 h时, 能得到较规则的、长径比约为4:1的棒状TiO2. 当溶液pH<10时, 得到球形的TiO2纳米粒子; 陈化时间为24 h时, 得到纺锤形TiO2纳米晶. 以上合成的纳米粒子均为锐钛矿型, 但当溶液的pH>12时, 则得到板钛矿型TiO2粒子. 以苯酚为降解模型, 考察了不同形貌TiO2的光催化活性.     

Fabrication of size-tunable TiO2 tubes using rod-shaped calcite templates

Titania tubes with tunable wall thickness were produced by the sol-gel reaction of titanium(IV) n-butoxide in the presence of rod-shaped calcite particles that act as templates. A shell of amorphous titania was deposited around the calcite particles by sol-gel synthesis. The titania was crystallized to the anatase or rutile phase by sintering at different temperatures, and then acid etching was used to remove the calcite core, leaving hollow titania tubes. The influences of several parameters on the final particle formation were investigated, including calcite templates, surfactant, the method of adding reagents, and catalyst. The average width of the prepared titania tubes ranges from nearly 100 nm to 1 microm, with wall thickness ranging from approximately 70 to 300 nm. A possible growth mechanism of the titania tubes is presented. The ability to control titania tube size and crystal structure is important for photocatalysis, photovoltaics, and other applications. The fabrication approach presented is applicable to form tubes of other oxide materials by sol-gel synthesis.     

The synthesis of organo-soluble anatase nanocrystals from amorphous titania

Highly soluble anatase nanocrystals of 4 nm diameter have been prepared by the reaction of amorphous titania with trifluoroacetic acid. The solubility of the nanocrystals is a result of surface bound carboxylate groups, and enables the organic-inorganic hybrid material to be processed from solution to yield high quality coatings and thin-films.     

Effect of heat treatment on the properties and structure of TiO2 nanotubes: phase composition and chemical composition

Titanium oxide (TiO₂) nanotubes prepared by electrolytic anodisation of a titanium electrode have been systematically heat treated to control the conversion of the as‐prepared amorphous structure to nanocrystalline anatase and rutile. Raman spectroscopy revealed that the temperature of calcination is critical in determining the structure and crystallinity of the titania. X‐ray Photoelectron Spectroscopy analysis shows the as‐prepared film to consist mainly of oxide, although a small amount of fluoride contamination remains from the electrolyte. Organic components from post‐anodising cleaning treatments were also present. Fluorine ions are gradually ejected from the anodic layer during annealing and the fluorine concentration is negligible in samples that are heat treated above 400 °C. Choosing the appropriate annealing temperature allows the structure to be made up of defined proportions of anatase and rutile with a reduced contamination of species from the electrolyte or organic solvents. Copyright © 2010 John Wiley & Sons, Ltd.