Hyaluronic acid methacrylate derivatives and calcium alginate interpenetrated hydrogel networks for biomedical applications: physico-chemical characterization and protein release

The preparation of a novel polysaccharide interpenetrating polymer network based on calcium alginate and methacrylated hyaluronic acid is described. The effect of two different solvents, distilled water and 0.9?% (w/v) NaCl, on the matrix formation and on its physico-chemical properties was studied by means of rheological and mechanical measurements. Furthermore, the structural characterization of the hydrogels prepared in the different ionic strength conditions was carried out by small-angle X-ray scattering in order to obtain deeper information useful for the preparation of drug delivery systems. Finally, to evaluate the potential use of the novel matrix as a drug delivery system and, in particular, its suitability for modulated delivery of a bioactive protein, release experiments of horseradish peroxidase, as a model protein, were also carried out.     

Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples’ structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N₂ adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f_t=ktⁿ was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties.     

Viscoelastic scaling in polymer gels

New scaling laws for chain networks are derived to describe the fundamental relationships between the viscosity exponent (k), viscoelastic exponent (m), stretched exponent (β), spatial dimension (d). fractal dimension (d_f), and a universal constant (γ). The scaling of the total number of monomers and the radius of gyration is defined by d_f. We have discovered γ = m/β to be a universal constant which relates the shear modulus of a polymer gel melt to the shear modulus near the glass transition. Analyzing the size-dependent shear viscosity, we have determined γ = 3d_fcd/(7d−5d_fc) = 2.647 for d = 3 where d_fc is the fractal dimension of critical clusters at the gel point. By using γ, the present theory extends previous work pertaining to systems near the sol-gel transition, and shows how properties far from the critical point can be explained. The theoretical prediction is in good agreement with viscoelastic measurements.     

Influence of the structure and morphology of ultrathin poly(3-hydroxybutyrate) fibers on the diffusion kinetics and transport of drugs

Ultrathin fibers of a biodegradable polymer poly(3-hydroxybutyrate) with an encapsulated drug (dipyridamole, 0–5% of poly(3-hydroxybutyrate) mass) are obtained by electrospinning. Introduction of the drug substantially affects the geometric shape and crystallinity of individual filaments as well as the total porosity of the fibrillar film on their basis. As follows from the SEM data, in the absence of the drug or at its low concentration (<3%), poly(3-hydroxybutyrate) fibers appear as ellipse-like fragments alternating with cylindrical ones. At a higher content of the drug (3–5%), the abnormal ellipse-like structures are practically absent and the fiber acquires the cylindrical shape. A set of morphological and crystallinity characteristics of the fibers determines the absorption of water and the rate of the diffusion transport of the drug as well as the corresponding profiles of its controlled release. A simplified model of drug desorption from the fibrillar film is advanced which considers two sequential stages of the process: (i) diffusion of the drug in the polymer fiber with coefficient D _f ~ 10^–12 cm²/s and dimeter φ_f ~ 2–4 μm and (ii) transport of the drug in the interfibrillar porous space filled by solvent with diffusion coefficient D _w = 5.5 × 10^–6 cm²/s. Using the characteristics of porosity, crystallinity, and geometry of the fibers and diffusion effective coefficients D _eff calculated from the profile of drug release, it is shown that the limiting stage of the transport of the drug is its diffusion in the volume of the cylindrical fiber. The model makes it possible to turn from the experimental values of D _eff to partial diffusion coefficients D _f and to calculate the kinetic profile of drug release with allowance made for the above-listed factors.     

The effect of filler content on the lower yield stress of polymer composites

The effect of the concentration of the dispersed elastic filler on the lower yield stress of matrix composites based on plastic polymers is studied. As the matrix polymers, LDPE-HDPE and LDPE-(medium-density PE) are used. The elastic filler is rubber crumb prepared by roll grinding of worn tires or by deformation grinding of ethylene-propylene-diene rubber. Irrespective of the type of filler particles and their adhesion to the polymer matrix, the lower yield stress σ_d of the composite is described by the linear law σ_d = σ_dm(1 ? V _f ), where σ_dm is the lower yield stress of the polymer matrix and V _f is the volume content of the filler. Analysis of the published data shows that this relationship is quite general and describes the effect of rigid inorganic particles on the lower yield stress when adhesion between the filler particles and the matrix is poor.     

Controlled release of drug via tuning electrospun polymer carrier

Medicated‐fibers have been obtained through electrospinning after rifampin was dissolved in poly (lactic acid)/chloroform solution. The relationship between polymer variables [such as concentration, molecular weight (M_w), and introducing hydrophilic block] and drug release from the electrospun fibers is disclosed. The results show that polymeric concentration and M_w are crucial for producing the medicated fibers, which influence not only the morphology of the medicated‐fiber but also drug release rate from fiber. At the same M_w, the drug release rate decreases with the increase of spinning concentration. At two different M_w blends, drug release behaviors change. When the low M_w content is in a dominant position, drug release rate depends largely on mixing ratio of two M_w contents; on the other hand, drug release rate is also dependent on concentration of spinning fluid. In addition, the block copolymer [poly‐L ‐lactic acid (PLLA)‐polyethylene glycol‐PLLA] shows faster release rate as compared to homopolymer (PLLA). © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Size exclusion chromatography on porous fractals

Summary Some porous packings used in chromatography have been claimed to be fractals with a scale of sizes a<l<L, where a is a molecular size and L is the size of the largest pores. For a fractal porous packing, the excluded volume for molecules in solution in the vicinity of the packing surface is directly related to D_f, the fractal dimension of the pore surface (2<D_f<3). Since retention in size exclusion chromatography is itself directly related to this excluded volume, the fractal nature of the packing provides a model of retention in this technique. According to this model there is a linear relationship between log R_s and log(1-K_d), where R_s is the hydrodynamic radius of the solute macromolecules and K_d the distribution coefficient. The fractal dimension is derived from the slope of this plot. Size exclusion chromatographic retention data have been analyzed according to the model. It is found that some HPLC packings are fractals with fractal dimensions ranging from about 2.15 to 2.6, depending on the material. Such a large range of D_f values indicates large variations in the selectivities and domains of applications of the different packings. For some classical gel filtration chromatographic gels, the fractal retention model does not seem to apply.Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.     

Electrospun nylon-4,6 nanofibers: solution rheology and Brill transition

Polyelectrolyte solutions of nylon-4,6 in 99 vol.% formic acid were electrospun, and then the concentration effect on the solution spinnability was studied. The microstructure of the as-spun nanofibers was characterized by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). Based on the solution rheology, the concentration of the entangled regime and the concentrated regime (? _D ) were 1 and 10 wt.%, respectively. To prepare bead-free fibers, the minimum polymer concentration used was 10 wt.%, yielding a fiber diameter of 49?±?13 nm. The fiber diameter (d _f) was dependent on the solution viscosity ( $ {\eta_{\mathrm{o}}} $ ) or the polymer concentration (?_w) through the following simple scaling law relation: d _f?～? $ \eta_{\mathrm{o}}^{0.62 } $ and d _f?～? $ {{({\phi_{\mathrm{w}}}/{\phi_{\mathrm{D}}})}^{2.25 }} $ . DSC heating trace on the as-spun nanofibers exhibited double-melting behavior. However, after cooling, the second heating trace showed a single melting peak. WAXD intensity profiles showed that the as-spun nanofibers possessed lamellae with small lateral dimensions, and the lattice parameter difference between a-axis and b-axis was significantly reduced due to the rapid electrospinning process. Both structural features induce the occurrence of the Brill transition of nylon-4,6 in the nanofibers at a much lower temperature of 80 °C than that in the melt-processed film, as-revealed by the temperature-variable WAXD.     

Inclusional association as studied by the drying dissipative structure. Part 2. Drying pattern of n-alkyltrimethylammonium bromide

Macro- and microscopic drying patterns were observed on a cover glass and a watch glass during the course of dryness of aqueous solutions of a series of n-alkyltrimethylammonium bromides (alkyl: n-decyl, n-dodecyl, n-tetradecyl, and n-hexadecyl). The broad rings formed at the outside edges of the macroscopic patterns. Size of the initial liquid on the substrates, d _i, that of the final broad ring, d _f, and the ratio, d _f/d _i, changed as the surfactant concentration changed, and there appeared a bending point in each curve, which was found to correspond to the critical micelle concentration (cmc) of the surfactant. The cmc values evaluated from the d _i, d _f, and d _f/d _i values agreed well with the reference values reported previously. Cooperative drying processes of the convection, sedimentation, and solidification were supported. Microscopic drying patterns such as rod-like, dendritic, and granule-like patterns were observed, and they changed as a function of the carbon number of the alkyl groups, surfactant concentration, and the distance from the center of the pattern.     

Collagen-based biomaterials for ibuprofen delivery

Drug delivery systems based on collagen sponges have increasingly become interesting materials for different medical applications. In this paper we present the obtaining, characterization and in vitro release of ibuprofen from collagen-based biomaterials in the form of sponges. The structural and morphological characteristics of these materials were investigated by infrared spectroscopy (FT-IR) and water uptake tests. Collagenase degradation, anti-inflammatory drug release and the kinetic mechanism are also discussed. The results obtained suggest that these new systems based on collagen have good potential for sustained release of analgesic and anti-inflammatory agents such as ibuprofen and the combination of collagen and ibuprofen as a sponge is a promising therapeutic method for the treatment of dental problems.     

Hyperfine structure in 5s 4d 3 D —5snf transitions of87Sr

The hyperfine spectra of the 5s4d ³ D ₁-5s20f, 5s4d ³ D ₂-5s23f, and 5s 4d ³ D ₃-5s32f transitions of⁸⁷Sr (I=9/2) have been measured by collinear fast beam laser spectroscopy. The structure in the upper configurations is highly perturbed by fine structure splitting that is of comparable size to the hyperfine interaction energy. These perturbations can be adequately treated with conventional matrix diagonalization methods, using the 5s-electron magnetic dipole interaction terma _5s and the unperturbed fine structure splittings as input parameters. Additionally, hyperfine constants for the lower 5s4d ³ D configurations, including theA- andB-factors and a separation of the individuals- andd-electron contributions to these factors, are derived.     

Fractal dimension and phase transition of graphene oxide (GO) doped polyacrylamide

Graphene Oxide (GO)- Polyacrylamide composites prepared between 5 and 50 μl GO were performed by Fluorescence Spectroscopy. The phase transition performed on the composites was measured by calculating the critical exponents, β and γ, respectively. In addition, fractal analysis of the composites was calculated by a fluorescence intensity of 427 nm. The geometrical distribution of GO in the composites was calculated based on the power law exponent values using scaling models. While the gelation proceeded GO plates first organized themselves into a 3D percolation cluster with the fractal dimension (D_f) of the composite, D_f = 2.63, then After it goes to diffusion limited clusters with D_f = 1.4, its dimension lines up to a Von Koch curve with a random interval of D_f = 1.14.     

Photoluminescence of Ce, Pr and Tb activated Sr3Ln(PO4)3 under VUV-UV excitation

The spectroscopic properties in VUV-Vis range for the eulytite structural phosphors Sr₃Gd(PO₄)₃:Ln³⁺ (Ln³⁺=Ce³⁺, Pr³⁺, Tb³⁺), Sr₃Ce(PO₄)₃, Sr₃Gd(PO₄)₃ and Sr₃Tb(PO₄)₃ were investigated. The bands near 170 nm in VUV excitation spectra are assumed to connect with the host lattices related absorption. The f-d transitions of Ce³⁺, Pr³⁺ and Tb³⁺ in the host lattices are assigned and corroborated. A convenient experiment formulation on the relationship between the lowest f-d transition energies and n value for trivalent 4fⁿ-series rare earth ions in these host lattices is applied.     

pH- and temperature-responsive hydrogels of acrylic acid,N-isopropylacrylamide and a non-ionic surfmer: phase behaviour,swelling properties and drug release

Copolymer hydrogels composed of N-isopropylacrylamide (NIPAM), acrylic acid (AA) and the non-ionic surfactant monomer (surfmer) ω-methoxy poly(ethylene oxide)₄₀undecyl-α-methacrylate (PEO-R-MA-40) were prepared and studied with regard to swelling behaviour and drug release behaviour. The gels were prepared upon γ-irradiation of the corresponding aqueous comonomer solution in a one-step reaction. Transparent, stable hydrogels were obtained. Studies of light transmission indicate a dual pH- and T-responsive behaviour, which originates from the AA and NIPAM content of the gels, respectively. Presence of large amounts of surfmer increases the phase transition temperature, but also increases the network density, which lowers the permeability of the gels. Swelling properties and release of ibuprofen (Ibu) were studied in simulated gastric fluid (SGF, pH 1) and phosphate buffer solution (PBS, pH 6.8). It was found that swelling and release are controlled by the nature and quantity of comonomers, pH, temperature and ionic strength of the aqueous phase. Swollen gels shrink in SGF and PBS, whereas dry gels exhibit a strong swelling both in SGF and PBS. Copolymer gels of AA and surfmer exhibit a strong, linear release of Ibu in SGF and PBS. If NIPAM is copolymerized in the gel, the drug release is decelerated in SGF probably due to formation of hydrogen bonds between NIPAM and Ibu at low pH. For example, a gel composed of 10 % (w/w) NIPAM, 1 % (w/w) AA and 1.5 % (w/w) surfmer exhibits a release of 10 % within 2 h in SGF and 58 % within 20 h in PBS.     

A new click reaction generated AIE-active polymer sensor for Hg2+ detection in aqueous solution

We described herein a new AIE-active polymer sensor incorporating triazole moiety for Hg²⁺ detection in aqueous solution. The polymer sensor P1 was synthesized from tetraphenylethene and diazidobenzene via click reaction. It shows typical AIE feature, and emits cyan fluorescence in the mixture of tetrahydrofuran and water, reaching the strongest fluorescence when the fraction of water (f_w) is 90%. In aqueous solution (f_w?=?90%), the polymer sensor can exhibit fluorescence quenching response towards Hg²⁺ over other competing metal ions, with the fluorescence color changed from cyan to almost no emission, which can be clearly observed by the naked eyes under 365?nm UV lamp.     

Smart,Naturally-Derived Macromolecules for Controlled Drug Release

A series of troxerutin-based macromolecules with ten poly(acrylic acid) (PAA) or poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) homopolymer side chains were synthesized by a supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) approach. The prepared precisely-defined structures with low dispersity (M_w/M_n < 1.09 for PAA-based, and M_w/M_n < 1.71 for PDMAEMA-based macromolecules) exhibited pH-responsive behavior depending on the length of the polymer grafts. The properties of the received polyelectrolytes were investigated by dynamic light scattering (DLS) measurement to determine the hydrodynamic diameter and zeta potential upon pH changes. Additionally, PDMAEMA-based polymers showed thermoresponsive properties and exhibited phase transfer at a lower critical solution temperature (LCST). Thanks to polyelectrolyte characteristics, the prepared polymers were investigated as smart materials for controlled release of quercetin. The influence of the length of the polymer grafts for the quercetin release profile was examined by UV–VIS spectroscopy. The results suggest the strong correlation between the length of the polymer chains and the efficiency of active substance release, thus, the adjustment of the composition of the macromolecules characterized by branched architecture can precisely control the properties of smart delivery systems.     

Heat transfer parameters in fixed bed exchangers

Heat transfer parameters were measured in fixed bed exchangers containing alumina catalyst particles with particle diameter d_p = 3.1 × 10⁻³ m. Different tube diameter (d_t) to particle diameter ratios were used, ranging from 3 to 18. Radial temperature profiles were measured at various axial positions. Results were analysed on the basis of a pseudohomogeneous unidimensional model leading to an overall wall heat transfer coefficient h_w, which showed a maximum value at d_t/d_p ≈ 6. Experimental results were also analysed by means of a pseudohomogeneous bidimensional model from which the wall heat transfer coefficient α_w and the effective radial thermal conductivity κ_er were calculated as a function of the particle Reynolds' number.     

Side-chain fluorination on the pyrido[3,4-<Emphasis Type="Italic">b</Emphasis>]pyrazine unit towards efficient photovoltaic polymers

A series of new polymer donors (PT-PP, PT-2fPP and PT-4fPP) were synthesized based on alkylthiophene substituted benzodithiophene (BDT-T) and pyrido[3,4-b]pyrazine (PP) building blocks and the effects of fluorination on the polymer properties were explored. Photophysical properties, charge mobilities and morphologies of the three polymers have been intensively investigated. The results indicated that the introduction of the fluorine atom at meta-positions of phenyl substituted PP unit hardly affected their highest occupied molecular orbital (HOMO) level. More importantly, controlling the degree of side-chain fluorination in the polymers is crucial for optimizing the blend morphology. Three polymers showed different photovoltaic properties. The polymer solar cell (PSC) based on the single layer device structure of ITO/PEDOT:PSS/PT-4fPP:PC₇₁BM (1:1, w:w)/ZrAcac/Al demonstrates a high power conversion efficiency (PCE) of 7.61% under the illumination of AM 1.5G, 100 mW cm^?2, which is the highest value for PP-based PSCs.     

Perfect gas thermodynamic properties of methanal,ethanal and their deuterated species

Employing recent and reliable selected molecular, spectroscopic, and thermal constants, the perfect gas thermodynamic properties [H⁰  H⁰₀, (G⁰  H⁰₀)/T, S⁰, C⁰_p, ΔH⁰_f, and ΔG⁰_f], for methanal (formaldehyde), methanal-d₁, methanal-d₂, ethanal (acetaldehyde), ethanal-d₁, and ethanal-d₄ were evaluated over the temperature range from 0 to 1500 K and 1 atm by statistical mechanical methods using rigid-rotor and harmonic-oscillator approximations. The internal rotation contributions of -CH₃ and -CD₃ rotors to the thermodynamic properties were computed based on internal rotation partition functions formed by summation of calculated internal rotation energy levels. The results compare well with available experimental data.