锂离子正极材料Li(Ni_(1/3)Co_(1/3)Mn_(1/3))_(1-x)Al_xO_2的制备及电化学性能

以化学法合成Li(Ni1/3Co1/3Mn1/3)1-xAlxO2系列正极材料(0≤x≤0.1);用X射线衍射仪、扫描电子显微镜和充放电仪研究系列产物的晶体微观结构、表面形貌以及电化学性能,研究不同Al含量参杂对材料性能的影响。结果表明,合成的材料均属于六方晶系,R3m空间群,保持α-NaFeO2层状结构相;Li(Ni1/3Co1/3Mn1/3)0.95Al0.05O2的首次放电容量166.30 mA·h/g,在2.5~4.5 V区间60次循环后比容量衰竭率为4.43%。通过对比Li(Ni1/3Co1/3Mn1/3)0.95Al0.05O2和Li(Ni1/3Co1/3Mn1/3)O2的电极阻抗,分析它们的电化学循环机理,可知掺杂Al后的正极材料适合大倍率放电。     

三(三甲基硅烷)亚磷酸酯添加剂改善高镍三元正极材料的高电压循环性能

研究了三(三甲基硅烷)亚磷酸酯(TMSP)添加剂对高镍三元正极材料Li Ni_(0.83)Mn_(0.05)Co_(0.12)O_2(LNMC811)高电压循环性能的影响。结合电化学表征、理论计算、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)等方法研究发现,在高电位(4.5 Vvs Li/Li~+)下,TMSP添加剂能够在LNMC811正极表面被氧化分解,生成一层富含导锂离子性能好的硅酸盐和电化学稳定的无机碳酸锂,且电解液主要分解产物(有机碳酸锂和氟化锂)含量较少的正极固体电解质界面(CEI)膜;分析表明覆盖在正极表面的薄而均匀的CEI膜,能够很好的降低充放电过程的极化电压,隔离电解液和正极的接触,减少电解液的分解,抑制金属离子的溶出,稳定正极晶体结构,使LNMC811材料能够在4.5 V(vs Li/Li~+)高电压循环时仍然保持良好的循环性能和倍率性能。     

Li_2CO_3添加剂对石墨电极性能的影响

运用电化学阻抗谱(EIS)和循环伏安法(CV)研究了在1mol/LLiPF6-EC(碳酸乙烯酯):DMC(碳酸二甲酯)电解液中添加Li2CO3对石墨电极性能的影响及机制.CV研究结果表明,在1mol/LLiPF6-EC:DMC电解液中添加Li2CO3能够有效抑制石墨电极首次充放电过程中碳酸乙烯酯(EC)的单电子还原过程,即还原分解产生乙烯和碳酸锂的过程,进而改善石墨电极的电化学循环性能.EIS研究结果表明,在添加Li2CO3的1mol/LLiPF6-EC:DMC电解液中,石墨电极表面的固体电解质相界面膜(SEI膜)具有较强的黏弹性,可以更好地适应锂离子嵌入过程中石墨颗粒体积的微小变化,从而使锂离子的嵌入过程更容易进行.     

Ag/C包覆对Li[Li0.2Mn0.54Ni0.13Co0.13]O2电化学性能的影响

运用共沉淀和元素化学沉积相结合的方法,制备出了具有Ag/C包覆层的层状富锂固溶体材料Li[Li0.2Mn0.54Ni0.13Co0.13]O2.通过X射线衍射(XRD)、场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)、恒流充放电、循环伏安(CV),电化学阻抗谱(EIS)和X射线能量散射谱(EDS)方法,研究了Ag/C包覆层对Li[Li0.2Mn0.54Ni0.13Co0.13]O2电化学性能的影响.结果表明,Ag/C包覆层的厚度约为25 nm,Ag/C包覆在保持了固溶体材料α-NaFeO2六方层状晶体结构的前提下,显著地改善了Li[Li0.2Mn0.54Ni0.13Co0.13]O2的电化学性能.在2.0-4.8 V(vs Li/Li+)的电压范围内,首次放电(0.05C)容量由242.6 mAh·g-1提高到272.4 mAh·g-1,库仑效率由67.6%升高到77.4%;在0.2C倍率下,30次循环后,Ag/C包覆的电极材料容量为222.6 mAh·g-1,比未包覆电极材料的容量高出14.45%;包覆后的电极材料在1C下的容量仍为0.05C下的81.3%.循环伏安及电化学交流阻抗谱研究表明,Ag/C包覆层抑制了材料在充放电过程中氧的损失,有效降低了Li[Li0.2Mn0.54Ni0.13Co0.13]O2颗粒的界面膜电阻与电化学反应电阻.     

Ag/C包覆对Li[Li0.2Mn0.54Ni0.13Co0.13]O2电化学性能的影响

运用共沉淀和元素化学沉积相结合的方法,制备出了具有Ag/C包覆层的层状富锂固溶体材料Li [Li0.2Mn0.54Ni0.13Co0.13]O2.通过X射线衍射(XRD)、场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)、恒流充放电、循环伏安(CV),电化学阻抗谱(EIS)和X射线能量散射谱(EDS)方法,研究了Ag/C包覆层对Li[Li0.2Mn0.54Ni03Co013]O2电化学性能的影响.结果表明,Ag/C包覆层的厚度约为25 nm,Ag/C包覆在保持了固溶体材料α-NaFeO2六方层状晶体结构的前提下,显著地改善了Li[Li0.0Mn054Ni0.13Co013]O2的电化学性能.在2.0-4.8 V (vs Li/Li+)的电压范围内,首次放电(0.05C)容量由242.6 mAh·g-1提高到272.4 mAh·g-1,库仑效率由67.6％升高到77.4％;在0.2C倍率下,30次循环后,Ag/C包覆的电极材料容量为222.6 mAh·g-1,比未包覆电极材料的容量高出14.45％;包覆后的电极材料在1C下的容量仍为0.05C下的81.3％.循环伏安及电化学交流阻抗谱研究表明,Ag/C包覆层抑制了材料在充放电过程中氧的损失,有效降低了Li[Li02Mn0.54Ni0.13Co013]O2颗粒的界面膜电阻与电化学反应电阻.     

锂离子电池正极材料Li_(1.2)Mn_(0.54-x)Ni_(0.13)Co_(0.13)Zr_xO_2的制备及电化学性能

为了改善富锂锰基正极材料Li1.2Mn0.54Ni0.13Co0.13O2的循环性能,采用燃烧法合成了正极材料Li1.2Mn0.54-xNi0.13Co0.13ZrxO2(x=0.00,0.01,0.02,0.03,0.06).通过X射线衍射(XRD)和扫描电镜(SEM)对其结构与形貌进行了表征,利用恒电流充放电测试,循环伏安(CV)及电化学交流阻抗谱(EIS)技术对其电化学性能进行测试.结果表明,Li1.2Mn0.54-xNi0.13Co0.13ZrxO2(x=0.00,0.01,0.02,0.03,0.06)正极材料均具有α-NaFeO2型层状结构;在室温,2.0-4.8 V电压范围,以0.1C和1.0C(充放电电流以1.0C=180 mA·g-1计算)倍率充放电进行测试,样品Li1.2Mn0.52Ni0.13Co0.13Zr0.02O2的首次放电比容量分别为280.3和206.4 mAh·g-1.其中,在1.0C倍率下,100次循环后容量保持率由原来的73.2%提高到88.9%;以5.0C倍率充放电进行测试,经50次循环后,掺杂正极材料的放电比容量为76.5 mAh·g-1,而未掺杂材料仅有15.0 mAh·g-1.在50、25和-10°C,2.0C倍率条件下,掺杂正极材料的电化学性能均得到有效改善,其中,在-10°C经过50次循环后正极材料Li1.2Mn0.52Ni0.13Co0.13Zr0.02O2比未掺杂的正极材料相比,其放电比容量提高了61.1%.     

锂离子电池电解液成膜添加剂乙烯基亚硫酸乙烯酯的电化学行为

研究了具有不饱和双键和亚硫酸酯双官能团的乙烯基亚硫酸乙烯酯(VES)作为锂离子电池电解液成膜添加剂对中间相碳微球(CMS)和LiFePO4电极电化学性能的影响. 结果表明: 在1 mol/L LiClO4/PC电解液体系中, 少量的VES (5%)能够在电化学过程中先于PC在CMS表面还原, 形成稳定的SEI膜, 明显抑制PC和溶剂化锂离子共嵌入石墨层间, 改善了电池的循环性能. 此外, 电解液1 mol/L LiClO4/PC＋5%VES (V∶V)在LiFePO4电极中展现出良好的电化学稳定性.     

LiF和LiCl对石墨电极电化学性能的影响

六氟磷酸锂是目前商品化锂离子电池中使用最广泛的电解质锂盐,LiF和LiCl是除水和酸之外六氟磷酸锂产品中最重要的杂质.运用扫描电子显微镜（SEM）、充放电、循环伏安法（CV）以及电化学阻抗谱测试（EIS）等研究了LiF和LiCl对石墨电极电化学性能的影响.充放电结果表明,在1 mol/L LiPF₆-EC：DEC：DMC电解液中添加饱和的LiF,可以显著提高石墨电极的充放电可逆容量并改善其循环性能,而在1 mol/L LiPF₆-EC：DEC：DMC电解液中添加饱和的LiCl,虽也可提高石墨电极的首次充电容量,但严重恶化石墨电极的充放电循环稳定性.CV结果表明,电解液中LiF、LiCl的存在对EC的还原分解过程影响较小.但SEM和EIS的结果指示,LiF、LiCl对石墨电极表面SEI膜的形成过程影响较大.在添加饱和LiF的电解液中石墨电极表面形成的SEI膜较薄且电阻较小,进而提高了石墨电极的可逆循环容量及改善了其循环稳定性;但在饱和的LiCl电解液中石墨电极表面形成的SEI膜较厚且电阻较大,严重恶化石墨电极的电化学循环稳定性.     

电解液添加剂硫酸亚乙酯对锂离子电池性能的影响

在1 mol/L LiPF₆/碳酸乙烯酯+碳酸二甲酯+碳酸甲乙酯（体积比1∶1∶1）电解液中,采用恒流充放电测试、循环伏安法（CV）、扫描电子显微镜（SEM）、能量散射光谱（EDS）、电化学阻抗谱（EIS）等测试技术,研究了添加剂硫酸亚乙酯（DTD）对锂离子电池性能及石墨化中间相碳微球（MCMB）电极/电解液界面性质的影响。 结果表明,在电解液中引入体积分数0.01%DTD后,MCMB/Li电池可逆放电容量从300 mA·h/g提高至350 mA·h/g,电池总阻抗降低,循环稳定性提高。CV测试发现,在首次还原过程中,DTD在电极电位1.4 V左右（vs Li/Li⁺）发生电化学还原,参与了MCMB电极表面固体电解质相界面膜（SEI膜）的形成过程。 同时,DTD对LiMn₂O₄电极性能无不良影响。     

YF3包覆Li(Li0.22Ni0.17Mn0.61)O2正极材料的性能

富锂层状氧化物作为锂离子电池正极材料具有高比容量优势.采用草酸盐共沉淀法制备Li(Li0.22Ni0.17Mn0.61)O2,并用YF3包覆电极.采用X射线衍射(XRD)、扫描电子显微镜(SEM)和X射线能谱分析(EDS)表征材料结构、观察材料形貌.结果表明,材料颗粒尺寸在100～200 nm范围,YF3包覆不会改变材料结构和形貌.电化学恒流充放电测试表明,YF3包覆Li(Li0.22Ni0.17Mn0.61)O2电极的比容量,尤其倍率比容量明显提高.60 mA·g-1电流密度下包覆电极材料30周循环后其比容量保持在220 mAh·g-1以上,1500 mA·g-1电流密度下其比容量仍可达150 mAh·g-1.电化学阻抗谱(EIS)测试结果表明,YF3包覆电极电荷转移电阻和扩散阻抗均明显降低,有利于电化学性能改善.     

Organotransition-Metal Complexes of Multidentate Ligands 5. Structural Characterization of Cis-Tetracarbonyl(3,5-Dimethylpyrazol-1-Yl) Methanemolybdenum(0)

The title compound crystallizes in space group P 2₁/c of the monoclinic system in a cell of dimensions: a = 9.231(2), b = 15.931(2), c = 12.420(2) Å, β = 108.37(1)°. The observed density is 1.60 g/cm³ and the density calculated for four molecules in the cell is 1.58 g/cm³. The refinement converged with R = 0.029 and R_w = 0.028 based on 2569 reflections with I > 2.5 σ. The molecule has approximate C_s symmetry with a mirror plane roughly containing the central Mo atom and two cis-carbonyls, C(1)O(1) and C(4)O(4), while bisecting the bidentate, H₂CPz₂, and two trans-carbonyls. The four carbonyls and tine bidentate adopt a quasi-octahedral arrangement around the Mo atom. The C(NN)₂Mo linkage of the (H₂CPz′₂)Mo fragment is observed to be in the boat form. The two cis-carbonyls are bent away by the bulky H₂CPz′₂ bidentate giving ∠C(1)-Mo-C(4) ? 167.3(1)°. The distortion explains the facile allyl bromination and decarbonylation observed for the title compound.     

Chemistry of 3-Hetarylcoumarins. 1. 3-(2-Benzazolyl)coumarins

The reaction of substituted salicylaldehydes with 2-benzimidazolyl- and 2-benzothiazolylacetonitriles gives the corresponding 3-hetarylcoumarins. The alkylation, acylation, and aminomethylation reactions of these 7-hydroxy-substituted hetero isoflavonoid analogs has been studied.     

1H-NMR and LC-MS Based Metabolomics Analysis of Wild and Cultivated Amaranthus spp.

Amaranthus crops are important for their use as food and nutritional sources, as well as for their medicinal properties. They are mostly harvested from the wild, and cultivation of Amaranthus species is still rare, and therefore, attempts are being made to commercialize and market this important crop. This research investigated the effect of cultivation and environment on the chemical profile of both cultivated and wild A. cruentus and A. hybridus by multivariate statistical analysis of spectral data deduced by Nuclear Magnetic Resonance (NMR). Furthermore, wild samples of A. cruentus and A. hybridus were subjected to Liquid Chromatography-Mass Spectrometry (LC-MS) for further analysis. Through NMR analysis, it was found that maltose and sucrose increased in both cultivated A. cruentus and A. hybridus. Moreover, the amino acid, proline was present in cultivated A. cruentus in high quantity whereas, proline and leucine were prominent in A. hybridus. Other compounds that were found in both wild and cultivated A. cruentus and A. hybridus are trehalose, trigonelline, lactulose, betaine, valine, alanine, fumarate, formate and kynurenine. LC-MS analysis revealed the presence of rutin, 2-phenylethenamine and amaranthussaponin I in both wild A. cruentus and A. hybridus, while chlorogenic acid was identified only in cultivated A. hybridus. On the contrary, L-tryptophan, kaempferol, phenylalanine and quercetin were detected only in wild A. cruentus. Amaranth is not only rich in macro and micronutrients, but the leaves also contain phytochemicals that vary between species and cultivated plants, and might, therefore, affect the medicinal properties of the material.     

Organotransition-Metal Complexes of Multidentate Ligands 3. The Unexpected Derivatives of Bis(3,5-Dimethylpyrazol-1-YL)Methanetetracarbonylmolybdenlim(0) and-Tungsten(0) Complexes

Thermolysis of (H₂CPz′₂)M(CO)₄ (H₂CPz′₂ = bis(3,5-dimethylpyrazol-1-yl)methane; M=Mo, W) in 1,2-dimethoxyethane did not give the expected 16-electron complexes, (H₂CPz′₂)M(CO)₃, but gave dinuclear compounds, [(H₂CPz′₂)M(CO)₃]₂, probably containing two linear carbonyl bridges and no metal-metal interactions. The dimers reacted with CH₃CN to give mononuclear compounds, (H₂CPz′₂)M(CO)₃(NCCH₃), identical to the substitution products between (H₂CPz′₂)M(CO)₄ and CH₃CN.     

Conformational Analysis of Germacrane Sesquiterpene Lactones. 1(10)Z,4E- and 1(10)E,4Z-Germacranolides

Molecular mechanics was used to study the structures of 1(10)Z,4E- and 1(10)E,4Z-germacranolides. Possible conformers, their probabilities, and barriers to conformational transitions were determined     

ChemInform Abstract: High-Pressure Studies of Transition-Metal Complexes. Part 1. Induced Torsional Deformation in Re2Cl2- 8.

The pressure dependence of the electronic absorption and Raman spectra of a solution of (Bu₄N)₂Re₂Cl₈ in CH₂Cl₂ has been investigated.     

Polyfluoroorganoboron‐Oxygen Compounds. 1 Polyfluorinated Aryl(dihydroxy)boranes and Tri(aryl)boroxins

A general preparative procedure for polyfluorinated aryl(dihydroxy)boranes C₆H_5‐nF_nB(OH)₂ (n = 3 — 5) is described. Polyfluorinated aryl(dihydroxy)boranes are easily dehydrated to the corresponding tri(aryl)boroxins (C₆H_5‐nF_nBO)₃ by thermal or chemical treatment. The property of the acids C₆H_5‐nF_nB(OH)₂ to condensate depends on the number and on the position of the fluorine atoms in the aryl group. Examples of both classes of boron compounds were isolated as pure individuals and characterized by multinuclear NMR spectroscopy.     

Preparation of 1-amino-4-methylpiperazine

The selectivity of the formation of N-di(2-chloroethyl)methylamine in reactions with various chlorinating agents has been investigated and the optimum chlorinating agent has been found. 1-Amino-4-methylpiperazine has been obtained for the first time by the cyclization of N-di(2-chloroethyl)methylamine with aqueous hydrazine. A possible mechanism has been proposed for the cyclization reaction.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1794–1797, December, 2004.     

锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2在不同电解液中的性能研究

应用低热固相合成法制备锂离子电池正极材料L iCo1/3N i1/3Mn1/3O2.研究该材料的结构与形貌,并比较它在商品L iPF6盐和在实验室合成的L iBOB(L iB(C2O4)2)盐电解液中的电化学性能.在L iPF6/EC+DMC+DEC电解液中,该材料表现出优良的电化学性能,其于0.5C、1C、1.5C、2C、3C放电倍率的初始比容量依次为167、163、163、157、147mAh/g,电池的循环性能也较好,说明低热固相合成的材料的有较好的高倍率性能.在L iBOB/EC+DEC+DE电解液中,0.5C倍率下比容量为160 mAh/g,较之L iPF6盐电解液的相差不大,但在高倍率下的比容量有所下降.