二类手性铜催化剂的合成及其在光学活性菊酸合成中的应用研究

报道了双恶唑啉和Ｓｃｈｉｆｆ碱二类手性配合物的合成及其在光学活性菊酸的不对称合成中的应用，以合成氯霉素中间体的无效体（１Ｓ，２Ｓ）－２－氨基－１－对硝基苯基－１，３－丙二醇为原料，分别制得了二取代双恶唑啉和Ｓｃｈｉｆｆ碱二类配体，并将其分别与醋酸铜配合后得到手性铜催化剂来诱导烯烃（２，５－二甲基－２，４－己二烯和１，１－二苯乙烯）与重氮乙酸酯的不对称环丙烷化反应，最高获得４５．２％ｅ．ｅ。     

邻香草醛缩天冬氨酸铜、锌、钴、镍配合物的合成

氨基酸希夫碱是具有多种配位原子和生物、化学活性的配体,其过渡金属配合物对生物无机化学和医药有重要意义［１～３］,我们曾报道过某些氨基酸希夫碱及其配合物的抗Ｏ－·２性能［４,５］．本文合成了邻香草醛缩天冬氨酸铜、锌、钴、镍配合物并进行了系列表征,提出其...     

壳聚糖希夫碱铜多相催化剂的制备及其催化苯乙烯环丙烷反应的研究

采用均相和多相两种方法合成了壳聚糖希夫碱－Cu(Ⅱ)配合物，用于催化苯乙烯的不对称环丙烷反应，考察了不同制备方法和不同铜含量对催化剂催化性能的影响以及催化剂的重复使用情况，当催化剂的铜含量为4．4％时，得到20．7％的ee值。     

稀土硝酸盐与N，N′－二（邻羟基苯亚甲基）联苯胺配合物的合成与表征

稀土硝酸盐与Ｎ，Ｎ′－二（邻羟基苯亚甲基）联苯胺配合物的合成与表征范玉华，毕彩丰，赵淑英，张虹（山东建材学院应用化学系济南２５００２２）某些稀土希夫碱配合物具有特殊的性质和应用￣［１，２］，越来越受到人们的重视。本文首次在非水体系中合成了双希夫碱Ｎ，...     

钴膦簇合物的催化环丙烷化反应

本文首次利用碳基钴簇合物ＰｈＰＣｏ_３（ＣＯ）_９催化剂，在常压和－２０℃－０℃，用苯乙烯和重氮乙酸乙酯进行环丙烷化反应，合成了菊酸酯，重氮乙酸乙酯可全部转化，酯的选择性可达８５％。产物经减压分馏后，由ＩＲ和￣１ＨＮＭＲ分析，确证了产物为菊酸酯，表明了羰基钴簇合物对苯乙烯的环丙烷化反应有良好的催化性能，为四面体异核簇合物用于不对称催化反应打下了基础。     

水杨醛-L-甲硫氨酸希夫碱钴(Ⅱ)配合物的热分解动力学

本文合成了一种新的希夫碱配合物，水杨醛－Ｌ－甲硫氨酸－水合钴（Ⅱ），Ｃｏ（ｓａｌｍｅｔ）．Ｈ２Ｏ并用非等温热重法研究了它的热分解反应动力学。     

新型双核铜配合物的合成,表征及其对苯乙烯环氧化的催化作用

设计合成了５种新型双核铜配合物，用ＥＡ，ＩＲ，ＵＶ－Ｖｉｓ，ＸＰＳ，ＥＰＲ等进行了结构表征，并研究了这些Ｃｕ２配合物模拟双核铜单加氧酶多巴胺β－羟化酶催化苯乙烯环氧化反应的特征。结果表明，这些配合物具有两种类型的结构：脱质子型Ｃｕ２ＬＯＨ和非脱质子型「（Ｃｕ２Ｈ２ＬＸ）Ｙ」Ｙ（Ｘ＝Ｙ＝Ｃｌ＾１－，Ｂｒ＾－；Ｘ＝ＯＨ，Ｙ＝Ｏ２ＣｌＯ＾－２），两类配合物可相互转化。非脱质子型配合物催化ＰｈＩＯ对苯乙烯     

N(—2-羟基乙基)—水杨醛亚胺稀土配合物的合成与性质研究

J.J.Calienni等以水杨醛及取代水杨醛与取代氨基乙醇反应制得多种希夫碱,并合成了它们与铕的希夫碱配合物。N-(2-羟基乙基)-水杨醛亚胺(HESI)与Co(Ⅱ)、Ni(Ⅱ)、Cu(Ⅱ)和Zn(Ⅱ)配合物的合成和抗癌活性的研究也有报道,但该希夫碱稀土配合物尚未见文献报道。鉴于有些稀土化合物具有消炎、抗癌活性,合成稀土希夫碱配     

正丁基黄原酸根合镉(Ⅱ)的合成和晶体结构

黄原酸配合物以及它们与各种路易斯碱反应的产物得到广泛的研究犤１～４犦。可溶性的黄原酸碱金属盐广泛用于汞、银、镉等金属的萃取分离犤５～７犦，并且这类盐对于汞中毒具有解毒作用犤８犦。E．D．Zelmon等犤９犦对过渡金属黄原酸配合物的非线性光学性质进行了研究。但迄今为止，对黄原酸镉配合物与路易斯碱的反应与结构研究较少。我们首先合成了一种配位聚合物犤Cd（S２CO－n－C４H９）２犦n晶体，然后利用吡啶与犤Cd（S２CO－n－C４H９）２犦n反应破坏其原有配位聚合物的结构，得到了犤Cd（C５H５N）２（S２CO－n－C４H９）…     

高分子担载水杨醛半胱氨酸希夫碱铜配合物催化氧化环己烯研究

研究了高分子担载水杨醛半胱氨酸希夫碱配合物(PS-Sal-Cys-M)催化氧化环己烯的性能,详细探讨了反应温度、反应时间、催化剂用量、反应添加剂对高分子担载水杨醛半胱氨酸希夫碱铜配合物催化氧化环己烯的反应性能的影响。研究表明,在常压下,用分子氧作作为氧化剂,不需要溶剂及共还原剂,环己烯可以被氧化生成环己烯醇和环己烯酮,产物的分离提纯比较容易,催化剂可以循环使用。     

Olefin epoxidation with tert-butyl hydroperoxide catalyzed by functionalized polymer-supported copper(II) Schiff base complex

Abstract  

A new polymer-supported Cu(II) Schiff base complex has been synthesized and characterized by elemental (including metal) analysis, FT-IR spectroscopy, UV–Vis diffuse reflectance spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The catalytic performance of this complex was evaluated in the epoxidation of styrene in acetonitrile/N,N-dimethylformamide (9:1) mixture with 70% tert-butyl hydroperoxide as an oxidizing agent under liquid phase reaction conditions for selective synthesis of styrene oxide. Suitable reaction conditions have been optimized by considering the effects of various reaction parameters such as temperature, reaction time, solvent, oxidant, catalyst amount, and styrene to hydroperoxide molar ratio for the maximum conversion of styrene as well as selectivity of styrene oxide. We have also investigated the epoxidation reaction of various olefins under the optimized reaction conditions. Comparison between catalytic activities of the polymer-supported Cu(II) Schiff base complex and its homogeneous analogue showed that the polymer-supported catalyst was more active. This heterogeneous complex was reused for five times. The selectivity of the heterogeneous catalyst does not change even after five times of reusing.     

TEMPO/固载化席夫碱铜配合物共催化剂在分子氧氧化苯甲醇过程中的催化性能

通过大分子反应,将苯甲醛(BA)和邻氨基苯酚(AP)形成的双齿席夫碱配基键合在交联聚甲基丙烯酸缩水甘油酯(CPGMA)微球表面,形成固载有席夫碱配基的载体微球BAAP-CPGMA,再通过与铜盐的配位螯合反应,制备了固载有席夫碱铜配合物的微球[Cu(BAAP)2]-CPGMA.将该固载化铜配合物与均相的2,2,6,6-四甲基哌啶氮氧自由基(TEMPO)构成共催化体系TEMPO/[Cu(BAAP)2]-CPGMA,应用于分子氧氧化苯甲醇的催化氧化过程.我们考察了该共催化体系的催化性能,并探索研究了催化氧化机理.实验结果表明,共催化体系TEMPO/[Cu(BAAP)2]-CPGMA可在温和条件下(室温、常压的氧气)高效地将苯甲醇氧化为苯甲醛(选择性100%,苯甲醛产率93%),并具有良好的循环使用性能.     

Study on Synthesis,Characteristics and Catalysis Properties of Novel Chiral Metal Complexes Catalysts for 1,3‐Dipolar Cycloaddition Reactions of Nitrone with Electron‐Rich Alkene

As a new class of potential catalysts for 1,3‐dipolar cycloaddition reactions, fourteen L‐amino acid Schiff base Cu(II) and Ti(IV) complexes were synthesized, characterized, and evaluated for their catalytic activities in the reaction between C,N‐diphenylnitrone and electron‐rich ethyl vinyl ether under both homogeneous and in situ conditions. The methods for preparation and utilization of the catalysts were elucidated in detail, and the results of the catalytic reactions were described and discussed as well. Excellent reaction results were found in the presence of some catalysts (20 mol%) with > 90% endo‐isoazolidines produced, compared with predominantly exo‐isoazolidine produced without a catalyst. In addition, the reaction rate is found to be enhanced remarkably by a Cu(II) complex Schiff base catalyst at room temperature.     

Preparation and characterization of Cu (II) Schiff base complex functionalized boehmite nanoparticles and its application as an effective catalyst for oxidation of sulfides and thiols

The synthesis, characterization, and evaluation of a Schiff base Cu (II) complex functionalized boehmite nanoparticles (Cu-complex-boehmite) as a new catalyst for oxidation of sulfides and thiols in the presence of hydrogen peroxide with complete selectivity and high conversion under solvent-free and mild reaction conditions were reported. Characterization of the catalyst was performed with various physicochemical methods. This effective catalyst was evaluated in terms of activity and reusability. It indicated high catalytic activity, good recoverability and reusability, and supplied the corresponding products in high yields and short reaction times. In addition, it shows notable advantages such as simplicity of operation, heterogeneous nature, easy work up, and it could be used at least eight times with no significant loss of its activity.     

Copper(II) Schiff Base Complex Immobilized on Superparamagnetic Fe3O4@SiO2 as a Magnetically Separable Nanocatalyst for Oxidation of Alkenes and Alcohols

A new heterogeneous catalyst containing a copper(II) Schiff base complex covalently immobilized on the surface of silica‐coated Fe₃O₄ nanoparticles (Fe₃O₄@SiO₂‐Schiff base‐Cu(II)) was synthesized. Characterization of this catalyst was performed using various techniques. The catalytic potential of the catalyst was investigated for the oxidation of various alkenes (styrene, α‐methylstyrene, cyclooctene, cyclohexene and norbornene) and alcohols (benzyl alcohol, 3‐methoxybenzyl alcohol, 3‐chlorobenzyl alcohol, benzhydrol and n ‐butanol) using tert ‐butyl hydroperoxide as oxidant. The catalytic investigations revealed that Fe₃O₄@SiO₂‐Schiff base‐Cu(II) was especially efficient for the oxidation of norbornene and benzyl alcohol. The results showed that norbornene epoxide and benzoic acid were obtained with 100 and 87% selectivity, respectively. Moreover, simple magnetic recovery from the reaction mixture and reuse for several times with no significant loss in catalytic activity were other advantages of this catalyst     

钴-席夫碱-壳聚糖/凹凸棒土对苯乙烯环氧化的催化性能

以NaOH固化法制备的壳聚糖/凹凸棒土（CS/ATP）复合树脂为载体,以水杨醛和天冬氨酸合成的席夫碱为配体,分别合成Co、Mn、Cu、Fe和Ni的席夫碱金属配合物及其负载型席夫碱金属配合物,并通过FT-IR对其进行结构表征,且以苯乙烯为底物,分子氧为氧源,分别考察了各种催化剂对苯乙烯的环氧化性能。 实验结果表明,在小分子席夫碱金属配体中,Co-Schiff碱催化性能较好。 将Co-Schiff碱负载到CS/ATP复合树脂中,综合考察了Co-Schiff碱-CS/ATP的用量、温度、时间对苯乙烯催化环氧化性能的影响,结果表明,反应温度为80 ℃,反应时间为8 h,苯乙烯的转化率达93.1%。     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Monomer/polymer Schiff base copper(II) complexes for catalytic oxidative polymerization of 2,2′‐dihydroxybiphenyl

Catalytic oxidative polymerization of 2,2′‐dihydroxybiphenyl (DHBP) was performed by using both the Schiff base monomer‐Cu(II) complex and Schiff base polymer‐Cu(II) complex compounds as catalysts and hydrogen peroxide as oxidant, respectively. The dependence of monomer conversion and molecular weight distribution on various reaction parameters, including time, temperature, solvent as well as the amount of catalyst and oxidant were investigated. The structure of the poly‐2,2′‐dihydroxybiphenyl (PDHBP) was confirmed by UV‐vis, IR, ¹H and ¹³C NMR spectroscopy techniques. The electrochemical and thermal properties of PDHBP were also studied. DSC data revealed that PDHBP was amorphous. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2977–2984, 2009     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

Synthesis,Characterization, and Catalytic Activity of New Cu(II) Complexes of Schiff Base: Effective Catalysts for Decolorization of Acid Red 37 Dye Solution

In this paper, three new Cu(II) Schiff base complexes with three different anions (acetate, chloride, and nitrate) were successfully synthesized and characterized by elemental analysis, mass spectra, molar conductance, FT‐IR, NMR,UV–vis spectroscopy, magnetic moment, ESR, and thermal analysis. The catalytic performances of these complexes in decolorization of azo dye, Acid Red 37, were evaluated. Copper(II) complexes were found to be an efficient catalyst for decolorization of Acid Red 37 in the presence of hydrogen peroxide. The catalytic investigation revealed that the Cu(II) complex with acetate anion (complex 1 ) performed the highest catalytic activity. The kinetics of the decolorization of AR37 with this catalyst was studied, and the observed rate constant was determined. The effects of different reaction parameters such as catalyst dosage, solution pH, initial concentration of H₂O₂, dye solution, and reaction temperature on the reaction rate constant were studied. The best reacting conditions should be catalyst dosage = 0.004 g, initial pH 4.0, [H₂O₂]₀ = 0.8 M, and [AR37]₀ = 1.16 M at temperature 25°C. Under these conditions, about 99% of AR37 was decolorized within 60 min. The results indicated that the Cu(II) complex with the acetate anion is a promising catalyst for wastewater treatment.