稀土金属氧化物对Pd/δ,θ-Al2O3催化蒽醌氢化制H2O2性能的影响

 采用湿浸法制备了用于蒽醌氢化制过氧化氢的系列氢化催化剂. 考察了不同稀土金属(La, Ce,Pr,Nd和Sm)氧化物对Pd/δ,θ-Al2O3催化剂性能的影响. 采用XRD,H2-O2滴定和N2物理吸附等技术对催化剂进行了表征. 结果表明,适量稀土金属氧化物的加入能抑制高温处理时Al2O3晶粒的增长,增大催化剂比表面积,提高金属Pd的分散度,从而提高催化剂的氢化活性. 稀土金属氧化物对Pd/δ,θ-Al2O3催化性能的影响顺序为La＞Nd＞Pr＞Sm＞Ce.     

掺杂型烧绿石La_2Sn_(1.7)Co_(0.3)O_(7-δ)逆负载CeO_2催化剂的甲烷催化燃烧性能

用溶胶凝胶-浸渍法在900℃煅烧3 h后制备了烧绿石逆负载型催化剂Ce O2/La2Sn1.7Co0.3O7-δ,并用于甲烷催化燃烧反应,显示出较好的催化燃烧活性.催化剂还具有良好的高温热稳定性和可重复利用性能,可使甲烷转化90%的温度(T90)降到564℃,与相同条件下制备的单一烧绿石型催化剂La2Sn1.7Co0.3O7-δ和La2Sn1.7Co0.3O7-δ与Ce O2机械混合的催化剂相比,T90分别降低78和135℃.X射线衍射结果表明,烧绿石型逆负载催化剂具有Ce O2和La2Sn1.7Co0.3O7-δ2种物相,在逆负载型催化剂中的Ce O2比机械混合催化剂中的Ce O2分散程度更好;H2程序升温还原实验也证实逆负载催化剂Ce O2/La2Sn1.7Co0.3O7-δ的相应3个还原峰温度均比单一烧绿石型催化剂La2Sn1.7Co0.3O7-δ相应3个还原峰温度明显降低;透射电子显微镜和原子力显微镜结果表明,逆负载催化剂Ce O2/La2Sn1.7Co0.3O7-δ抗烧结能力强,颗粒分散均匀,粒径尺寸相应较小;穆斯堡尔谱和X射线光电子能谱结果证明逆负载催化剂Ce O2/La2Sn1.7Co0.3O7-δ结构中结晶相Sn4+含量较高,表面晶格氧数量较多,这是烧绿石逆负载型催化剂具有良好甲烷催化燃烧性质的主要原因.     

Pd/Ce0.8Zr0.15La0.05Oδ整体催化剂甲苯催化燃烧性能的研究

采用一次浸渍法分别制备了 Pd/Ce0.8Zr0.15La0.05Oδ及Pd/Ce0.8Zr0.2O2整体式蜂窝陶瓷催化剂,考察了不同温度焙烧的两类整体催化剂甲苯催化燃烧性能.通过X射线粉末衍射(XRD)、比表面积、拉曼光谱(Raman)、程序升温还原(H2-TPR)、PdO分散度等表征结果与催化活性进行关联.结果表明,随着焙烧温度升高,催化剂比表面积下降,Raman图谱CeO2及PdO峰强度增加,H2-TPR中Ce4+还原峰向高温方向移动,同时PdO分散度下降,相应甲苯催化氧化活性下降.与CeO0.8Zr0.2O2涂层催化剂相比,La3+掺杂催化剂在高温焙烧时,其比表面积下降较小,Raman光谱表明其氧缺位比铈锆涂层催化剂多,H2TPR谱图中Ce4+还原峰低约60～80℃,PdO分散度亦比末掺杂催化剂高.1000℃焙烧下的甲苯氧化反应活性远高于未掺杂催化剂,说明镧的掺杂提高了铈锆涂层催化剂的高温反应活性及热稳定性.     

纳米La0.8A’0.2Mn1-xCuxO3（A’=Ce and/or Sr）的制备、表征及其高效催化NO+CO的性能研究

采用柠檬酸-溶胶凝胶法制得钙钛矿型复合氧化物La0.8Ce0.2Mn1-xCuxO3(x=0.2,0.3,0.4),La0.8Sr0.2Mn0.6Cu0.4O3,La0.8Ce0.1Sr0.1Mn0.6 Cu0.4 O3,并采用X射线衍射(XRD)、扫描电镜(SEM)、比表面积(BET)、X射线光电子能谱(XPS)对其进行表征,测试了复合氧化物对CO+NO的催化活性。结果表明:La0.8Ce0.1Sr0.1Mn0.6Cu0.4O3催化活性最好,150℃时CO转化率91.8%,300℃时NO转化率100%;对于La0.8Ce0.2Mn1-xCuxO3(x=0.2,0.3,0.4),比表面积和颗粒的大小及分散度是影响催化活性的主要因素;对于La0.8Ce0.2Mn0.6Cu0.4O3,La0.8 Sr0.2 Mn0.6 Cu0.4 O3,La0.8 Ce0.1 Sr0.1 Mn0.6 Cu0.4 O3,催化剂的组成是影响催化活性的关键因素。     

超临界水体系制备二氧化铈纳米颗粒

采用超临界水氧化的方法,使用自主设计的SCWO连续性反应釜制备出纳米Ce O2粉末,并应用XRD,FE-SEM,XPS等一系列分析手段对实验样品的结构与形貌进行了表征。结果表明:采用SCWO超临界反应釜制备的产物Ce O2纳米颗粒呈球形,结晶良好,平均粒径控制在10 nm左右,随着Ce(NO3)3·6H2O水溶液浓度的增大,制备出的纳米Ce O2粉末的粒径逐渐减小,粒度分布更加集中,但是粒子间团聚现象加重,Ce与O的结合能力逐渐减弱;随着Ce(NO3)3·6H2O水溶液浓度的增大,所制得的产物纳米Ce O2颗粒的BET比表面积也逐渐增加,平均比表面积为48 m2·g-1。     

负载型钯催化剂上生物质气化气催化燃烧

采用浸渍法制备了Pd/Al2O3、Pd/Ce/Al2O3、Pd/Mn/Al2O3、Pd/La/Al2O3四种催化剂。并借助XRD、BET对催化剂相结构、比表面积、孔结构进行了表征,在固定床反应器上考察了四种催化剂对CO、H2和CH4的催化燃烧性能。结果表明,随着La、Ce、Mn离子的引入使得催化剂的比表面积和孔容积不断降低;添加助剂Ce可以提高催化剂活性和热稳定性,助剂La可以提高催化剂的抗烧结能力,而助剂Mn在低温时可以提高催化剂活性,但并不能抑制催化剂的高温钝化。CO和H2的起燃顺序随催化剂的不同而不同,但四种催化剂对CO和H2的催化燃烧活性接近,均可以在低温条件下迅速燃烧,同时其燃烧特征温度明显低于CH4。     

镧、钇、镨、钕的添加对Pt/CeO_2消除碳烟性能影响

合成一系列催化剂Pt/Ce O2-Ln Ox(Ln=La,Y,Pr,Nd;Ln Ox掺杂量为10%(质量分数)),利用热重和原位红外等技术考察催化剂在NO下的碳烟消除性能,结果表明稀土氧化物Ln Ox的添加能抑制Ce O2晶粒长大、提高催化剂的比表面积和提高催化剂表面活性氧物种(O-2,O-)的量,但对催化剂中Pt分散度影响很小;催化剂的比表面积越大、孔径分布越规则、Ce O2晶粒越小、表面活性氧物种(O-2,O-)的量越多,催化剂在NO气氛下对碳烟消除能力越强;另外,结合In Situ DRIFT表征和活性结果证明NO储存的中间物种对碳烟消除的活性顺序为:螯合双齿硝酸盐桥式双齿硝酸盐单齿硝酸盐,并且中间物种的量越多,催化剂的活性越强。     

Ce基复合氧化物同时催化去除碳烟-NO_x的性能研究

我们采用柠檬酸配合法制备了Ce基复合氧化物催化剂,分别在热重分析仪(TG)和管式反应器中测试了其氧化碳烟及同时脱除NOx的催化活性;并利用XRD、BET、H2-TPR、XPS表征手段考察其结构.其中,Co0.1/C e La0.05复合氧化物同时催化去除碳烟和NOx的性能最佳,碳烟脱除率为50%的反应温度为301℃,N2产率为41.4%.实验结果表明,Co主要以氧化物形式均匀分散在Ce-La固溶体表面,Co3+与Co2+价态共存,离子间的变价有利于提高催化剂的氧化还原性能,有效降低了碳烟的起燃温度.La的引入增大了催化剂的比表面积,抑制了Ce O2晶粒长大,进而提高了N2产率.部分La和Co形成了微量的La Co O3,形成了更多氧空位,有利于提高催化氧化碳烟的活性.     

Ce0.35Zr0.55La0.10O1.95对低贵金属Pt-Rh型三效催化剂性能的影响

采用共沉淀技术制备了Ce0.35Zr0.55La0.10O1.95固溶体, 其织构和结构性能以及氧化还原性能分别采用BET、XRD和程序升温(TP)技术进行了表征. 制备了低贵金属Pt-Rh型三效催化剂, 考察了Ce0.35Zr0.55La0.10O1.95对催化剂性能的影响. XRD和BET的结果表明, 经600 ℃焙烧5 h后, Ce0.35Zr0.55La0.10O1.95具有与Ce0.50Zr0.50O2相似的立方结构和高的比表面积；经1000 ℃焙烧5 h后, 仍能保持稳定的立方结构和47.25 m2•g−1的比表面积, 表现出优越的织构性能和高的热稳定性. H2-TPR和O2-TPO的结果表明, Ce0.35Zr0.55La0.10O1.95具有比Ce0.50Zr0.50O2更好的氧化还原性能. 和含Ce0.50Zr0.50O2的催化剂相比, 含Ce0.35Zr0.55La0.10O1.95的催化剂具有较宽的工作窗口, 优越的低温起燃性能, 较强的水气变换能力；催化剂经1000 ℃高温水热老化5 h后, 仍具有良好的催化活性, 表现出了优异的抗老化性能.     

WO3/TiO2纳米材料的制备及光催化性能

采用溶胶-凝胶法制备WO3/TiO2复合纳米光催化剂,掺入WO3、TiO2锐钛矿101峰的相对强度、平均晶粒直径与颗粒直径均减小,比表面积增大;WO3掺入摩尔比分别为2%、5%、8%时,新的LRS峰位分别出现在797、967及969cm-1;在380-460nm范围内,WO3/TiO2的反射率减小,XPS分析表明,WO3/TiO2晶体中存在W6+、W5+、W4+、和Ti4+、Ti3+。以亚甲基兰的光催化降解为反应模型,掺入WO3后,光催化活性增强,掺入摩尔比为2%时,WO3/TiO2的光催化活性最高。还讨论了光催化活性与性质的关系。     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.     

钒与糖代谢及糖尿病

微量元素钒作为生物体内必需元素，经证实有很重要的生理学功能，与机体糖代谢有十分密切的关系，且能降低糖尿病动物模型的高血糖，极有可能被开发为治疗糖尿病的药物。     

Synthesis of Tyrosol and Hydroxytyrosol Glycofuranosides and Their Biochemical and Biological Activities in Cell-Free and Cellular Assays

Tyrosol (T) and hydroxytyrosol (HOT) and their glycosides are promising candidates for applications in functional food products or in complementary therapy. A series of phenylethanoid glycofuranosides (PEGFs) were synthesized to compare some of their biochemical and biological activities with T and HOT. The optimization of glycosylation promoted by environmentally benign basic zinc carbonate was performed to prepare HOT α-L-arabino-, β-D-apio-, and β-D-ribofuranosides. T and HOT β-D-fructofuranosides, prepared by enzymatic transfructosylation of T and HOT, were also included in the comparative study. The antioxidant capacity and DNA-protective potential of T, HOT, and PEGFs on plasmid DNA were determined using cell-free assays. The DNA-damaging potential of the studied compounds for human hepatoma HepG2 cells and their DNA-protective potential on HepG2 cells against hydrogen peroxide were evaluated using the comet assay. Experiments revealed a spectrum of different activities of the studied compounds. HOT and HOT β-D-fructofuranoside appear to be the best-performing scavengers and protectants of plasmid DNA and HepG2 cells. T and T β-D-fructofuranoside display almost zero or low scavenging/antioxidant activity and protective effects on plasmid DNA or HepG2 cells. The results imply that especially HOT β-D-fructofuranoside and β-D-apiofuranoside could be considered as prospective molecules for the subsequent design of supplements with potential in food and health protection.