Decomposition of ZnSO4 in a self-generalized atmosphere

The kinetics of the thermal decomposition of mixed ligand complexes of Mn(II), Cu(II), Zn(II) and Cd(II) containing N-(2-hydroxyethyl)-ethylenediamine and oxalate have been studied employing thermogravimetry (TG) and differential scanning calorimetry (DSC). The activation energy of the first order reaction in which the complex loses one molecule of the amine was calculated using the equations of Dharwadkar and Karkhanavala (modified Horowitz and Metzger equation) and Coats and Redfern from the TG data, and Swarin and Wims from the DSC data. These values are 23.45, 16.83, 19.62 and 19.25 kcal mole^?1 respectively, using the method of Dharwadkar and Karkhanavala. Infrared spectral studies of these complexes were carried out to determine the coordinating behaviour of the ligand in these complexes.     

Thermal, UV, FTIR, and XRD studies of urinary stones

Various crystals are seen in human urine. Oxalate, Phosphate, Uric acid, and Urate crystals are generally seen in urinary calculi. Calcium stones are most common, comprising 75 % of all urinary calculi. They may be pure calcium oxalate or calcium phosphate or a mixture of both. Many stones are not homogeneous. Low calcium intake increases the intestinal absorption of calcium, thus decreasing the amount of calcium available in the intestinal tract to form insoluble complexes with Oxalate. Consequently, a higher amount of oxalate is available for intestinal absorption and as a result, urinary oxalate excretion increases. Mineral water consumption did not reduce urinary oxalate excretion. High urinary excretion and concentration of magnesium decrease both the nucleation and growth rates of calcium oxalate crystals in urine, because of the higher solubility of magnesium oxalate compared with calcium oxalate. Analytical results show calcium oxalate to be one of the major inorganic components of renal stones and found to be present in almost all kidney and bladder stones. About 39.5 % of the total composition of the calculi is found to contain purely calcium oxalate and also hydroxyl apatite. The ten samples are a mixture of calcium oxalate and phosphate stones. Four samples are calcium oxalate as major composition and the remaining are calcium phosphate as major composition. These kidney stones are taken photographically and size of the stone are measured using optical microscopy. These qualitative analyses are also confirmed by UV, FTIR, DSC, and XRD analysis.     

The use of thermal analysis in determination of some urinary calculi of calcium oxalate

The human urinary calculi are mainly constituted by calcium oxalate, magnesium ammonium phosphate hexahydrate, and uric acid. The ions or molecules are easily characterized by wet chemical methods. The difficulties appear in the differentiation of the hydrates of calcium oxalate (monohydrate COM or Whewellite, and dihydrate COD or Weddelite). A high level of COD in the urinary stones leads, often, inflammation, sharp pain and blood in urine. In the worse cases, they must be extracted by surgical way. The identification of the main components of urinary calculi, the knowledge of the true number of water molecules bounded to the calcium oxalate, and the determination of each hydrate in the mixture, are the interests of this memory. The thermal analysis (simultaneous DTA-TG) was applied on thirty-three urinary calculi. The determination of the calcium oxalate hydrates was confirmed by calorimetry (DSC). This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal analysis of monument patina containing hydrated calcium oxalates

This work describes the thermal transformation of patina samples formed on the surface of dolomitic rocks used to build the Romanesque Torme's Church (Burgos, Spain). Analyses were performed using a combination of high-temperature XRD, simultaneous TG/DTA and gas mass spectrometry. The XRD analysis revealed the presence of hydrated calcium oxalates. The following three steps were proposed for the thermal transformation of the raw material: dehydration of weddellite/whewellite to form calcium oxalate, transformation of calcium oxalate to calcium carbonate, and formation of calcium oxide produced via decomposition of the calcite. DTA/TG and mass spectrometry analyses confirmed this mechanism. In addition, a high proportion of organic compounds was detected and was possibly formed via degradation of products applied for the building's conservation by the action of microorganisms attack. Mass spectrometry analysis revealed CO (and CO₂) gas evolved during the transformation of CaC₂O₄ to CaCO₃. The CO₂ gas also appears at 765 °C due to the decomposition of calcium carbonate, and it appears over a large range of temperatures due to the decomposition of organic compounds. The TG analyses performed in a CO₂ atmosphere were used to determine the percentages of Ca and Mg contained in dolomite, and the calcium carbonate formed by oxalate decomposition. DRIFTS and mass spectrometry results revealed the presence of several aliphatic and/or aromatic compounds containing CO groups.     

An investigation on the solid state pyrolytic decomposition of bimetallic oxalate precursors of Ca, Sr and Ba with cobalt: A mechanistic approach

The mixed metal oxalate precursors, calcium(II)bis(oxalato)cobaltate(II)hydrate (COC), strontium(II)bis(oxalato)cobaltate(II)pentahydrate (SOC) and barium(II)bis(oxalato)cobaltate(II)octahydrate (BOC) have been synthesized and their thermal stability was investigated. The complexes were characterized by elemental analysis, IR spectral and X-ray powder diffraction studies. Thermal decomposition studies (TG, DTG and DTA) in air showed that the compound COC decomposed mainly to CaC₂O₄ and Co₃O₄ at 340 °C, and a mixture of CaCO₃ and Co₃O₄ identified at 510 °C. A mixture of CaCO₃ and Ca₃Co₂O₆ along with the oxides and carbides of both the cobalt and calcium were attributed at 1000 °C as end products. DSC study in nitrogen ascertained the formation of a mixture of CaO and CoO along with a trace of carbon at 550 °C. The mixture species, SrC₂O₄, CoC₂O₄ and Co₃O₄ were generated at 255 °C in case of SOC in air, which ultimately changed to CoSrO₃, SrCO₃ and oxides of strontium and cobalt at 1000 °C. The several mixture species also generated as intermediate at 332 and 532 °C. The DSC study in nitrogen indicated the formation of CoSrO_x (0.5 < x < 1) as end product. In case of BOC in air, a mixture of BaCoO₂, BaO, CoO and carbides are identified as end product at 1000 °C through the generation of several intermediate species at 350 and 530 °C. A mixture of BaO and CoO is identified as end product in DSC study in nitrogen. The kinetic parameters have been evaluated for all the dehydration and decomposition steps of all the three compounds using four non-mechanistic equations. Using seven mechanistic equations, the kind of dominance of kinetic control mechanism of the dehydration and decomposition steps are also inferred. The kinetic parameters, ΔH and ΔS of all the steps are explored from the DSC studies. Some of the decomposition products are identified by IR and X-ray powder diffraction studies.     

Thermal Analysis,EPR and XPS Study of Vanadyl(IV) Oxalate Behavior on the Ceria Surface

The thermal decomposition of vanadyl oxalatesupported on CeO₂ solid in a flow of dried air was analysed by thermogravimetry (TG) and differential scanning calorimetry (DSC) from room temperature up to 350°C. TG and DSC results have demonstrated that after the impregnation of CeO₂ solid by a vanadyl oxalate solution, cerium and vanadium(V) oxalates were evidenced. This latter compound seems attached to cerium(III) of the partial reduced CeO₂ phase. This result was confirmed with the electron paramagnetic resonance(EPR) and X-ray photoelectron spectroscopy (XPS) techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of nicotinate complexes of cobalt and nickel in dynamic nitrogen atmosphere

Thermal decomposition of cobalt and nickel nicotinate was studied by TG, DTG and DSC. The mechanism of decomposition has been established from TG and DSC data. The kinetic parameters namelyE, A together with ΔH were calculated from DSC curves using mechanistic and non-mechanistic integral equations.

---

Zusammenfassung Mittels TG, DTG und DSC wurde die thermische Zersetzung von Cobaltund Nickelnikotinat untersucht. Der Zersetzungsmechanismus wurde anhand der TG-und DSC-Daten entwickelt. Die kinetischen ParameterE, A wurden zusammen mit ΔH anhand der DSC-Kurven mit Hilfe von mechanistischen und nichtmechanistischen Integrationsgleichungen berechnet.

     

TG and DSC studies on Sm(III) and Tb(III) tartrates

The tartrate monohydrates of Sm(III) and Tb(III), Sm₂C₁₂H₁₂O₁₈·H₂O and Tb₂C₁₂H₁₂O₁₈·H₂O, were prepared and characterized on the basis of their elemental analysis and IR spectral studies. The thermal decompositions of these compounds, studied by TG and DSC methods, were found to follow an almost uniform pattern. Decomposition occurs in four steps. The first step involves dehydration, accompanied by partial decomposition to the oxalate, followed by conversion to the carbonate. The ultimate product in each case is the oxide M₂O₃, whereM=Sm or Tb. Reflectance spectra of the terbium compound were recorded at various stages of decomposition. The kinetics of the first decomposition step was studied by the non-isothermal method. TG and DSC data for this step were analysed for the evaluation of various kinetic parameters. Reasonable values ofE, Z, andΔS ⁺ were obtained.α vs. T curves were drawn on the basis of the TG and DSC data. The results suggest that the mechanism involves random nucleation.     

Use of DSC and TG for identification and quantification of the dosage form

Thermal analysis techniques, DSC and TG can advantageously be used in quality control of drug products.The methods are commonly used in preformulation for the study of polymorphism and for the study of the interactions drug substance-excipients, since these physical interactions can be the basis of the dosage form performance.For routine control of the drug products, DSC and TG methods which are quick, which require only few mg of the samples and which are automated, are very attractive for routine analysis of drug products. A single scan can give several qualitative and quantitative informations.DSC offer analytical possibilities only if the drug substance and the excipients do not have physical interactions or limited interactions (e.g. eutectic behaviour). About twenty marketed products have been analyzed by DSC and TG. In most of them identification of drug substance is easy. Several excipients could be identified in a tablet. Quantitations are demonstrated for some drug substances and excipients. DSC purity calculations have been applied to acetyl salicylic acid, paracetamol, cimetidine, pindolol, ibuprofen.     

Displacement reactions in gypsum and in anhydrite

Displacement reactions between calcium sulfates (gypsum and anhydrite) and aqueous solutions of Ba⁻, Sr⁻ and Pb-salts were investigated by means of TG, DSC,microscopy and x-ray. The reactions can be followed directly by microscopy when cleavage plates of gypsum crystals are used. The first steps of crystallization are in some cases of a topotactical nature. The results presented in this paper deal mainly with the formation of barite, celestite and anglesite by displacement reactions at different temperatures.     

差示扫描量热法测定草酸艾司西酞普兰纯度

采用差示扫描量热法(DSC),根据DSC曲线利用纯度分析软件测定草酸艾司西酞普兰的纯度。对实验条件进行了优化,升温速率为4.0 K/min,称样量为2~3.2 mg。测得草酸艾司西酞普兰的纯度为99.17%,相对标准偏差为0.05%(n=6)。该法测定结果与非水滴定法测定结果(99.24%)基本一致。差示扫描量热法可用于测定草酸艾司西酞普兰纯度,方法操作简便、结果准确。     

Thermal behavior of Ca2+ and Cu2+ oxalates obtained by precipitation in homogeneous solution from dimethyl oxalate hydrolysis

Mixed calcium and copper oxalates, with different proportions of Ca²⁺ and Cu²⁺ ions, were precipitated by dimethyl oxalate hydrolysis in homogeneous solution. The compounds were evaluated by means of scanning electron microscopy, energy dispersive X-ray spectroscopy, thermogravimetry (TG), and differential thermal analysis (DTA). The results suggested quantitative precipitation without solid solution formation. From the TG and DTA curves, it was possible to evaluate the Ca²⁺ ion proportion in the solid phase and to confirm the precipitation of the individual species.     

Monitoring of the Gas Phase Composition: A Prerequisite for Unravelling the Mechanism of Decomposition of Solids. Thermal decomposition of cobalt oxalate dihydrate

The complexity of the processes occurring during cobalt oxalate dihydrate (COD) decomposition indicates that an interpretation of the mechanism based only on the TG curve is of little value. Mass change alone does not allow deeper insight into all of the potential primary and secondary reactions that could occur. The observed mass changes (TG) and thermal effects (DTA/DSC) are a superposition of several phenomena and thus do not necessarily reflect COD decomposition alone. Investigation of the mechanism of decomposition requires the application of different simultaneous techniques that allow the qualitative and quantitative determination of the composition of the gaseous products. Composition of the solid and gaseous products of COD decomposition and heats of dehydration and oxalate decomposition were determined for inert, oxidizing and hydrogen-containing atmospheres. Contrary to previous suggestions about the mechanism of cobalt oxalate decomposition, the solid product formed during decomposition in helium contains not only metallic Co_met, but also a substantial amount of CoO (ca 13 mol%). In all atmospheres, the composition of the primary solid and gaseous products changes as a result of secondary gas-solid and gas-gas reactions, catalyzed by freshly formed Co_met. The course of the following reactions has been investigated under steady-state and transient conditions characteristic for COD decomposition: water gas shift, Fischer-Tropsch, CO disproportionation, CoO reduction by CO and H₂, Co_met oxidation under rich and lean oxygen conditions. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preparation and properties of calcium silicate hydrate-poly(vinyl alcohol) nanocomposite materials

Summary A series of calcium silicate hydrate (C-S-H)-polymer nanocomposite (C-S-HPN) materials were prepared by incorporating poly(vinyl alcohol) (PVA) into the inorganic layers of C-S-H during precipitation of quasicrystalline C-S-H from aqueous solution. The as synthesized C-S-HPN materials were characterized by Fourier-transform infrared photoacoustic (FTIRPAS) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy/energy dispersed spectroscopy (SEM/EDS), thermogravimetric analysis (TG), differential thermogravimetry (DTG) and differential scanning calorimetry (DSC). The XRD peaks of C-S-HPN materials suggest the intermediate organizations presenting both intercalation of PVA and exfoliation of C-S-H. The SEM micrographs of C-S-H, PVA and C-S-HPN materials with different PVA contents exhibit the significant differences in their morphologies. Effects of the material compositions on the thermal stability of a series of C-S-HPN materials along with PVA and C-S-H were studied by TG, DTG and DSC. Three significant decomposition temperature ranges were observed in the TG curves of all C-S-HPN materials.     

Analysis of calcium, oxalate, and citrate interaction in idiopathic calcium urolithiasis in children

The majority of urinary stones in children are composed of calcium oxalate. To investigate the interaction between urinary calcium, oxalate, and citrate as major risk factors for calcium stones formation, their 24-h urinary excretion was determined in 30 children with urolithiasis and 15 normal healthy children. The cutoff points between children with urolithiasis and healthy children, accuracy, sensitivity, and specificity for each risk factor alone as well as for all three taken together were determined. OneR and J4.8 classifiers as parts of the larger data mining software Weka, based on machine learning algorithms, were used for the determination of the cutoff points for differentiation of the children. The decision tree based on J4.8 classifier analysis of all three risk factors together proved to be the best for differentiating stone formers from normal children. In comparison to the accuracy of the differentiation after calcium and oxalate of 80% and 75.6%, respectively, the decision tree showed an accuracy of 97.8%. Even when its stability was tested by the leave-one-out cross-validation procedure, the accuracy remained at a very acceptable percentage of 93.2% correctly classified patients. J4.8 classifier analysis gave a look inside urinary calcium, oxalate, and citrate interaction. Urinary calcium excretion was shown as the most informative in discrimination of the children with urolithiasis from healthy children. However, it was shown that oxalate and citrate excretions might influence the stone formation in a subpopulation of the stone formers. In patients with low urinary calcium, a major role in lithogenesis belongs to oxalate, in some of them alone and in others in conjunction with citrate. Decreased urinary citrate excretion in the presence of increased oxalate excretion may lead to stone formation.     

Study of stability and drug-excipient compatibility of diethylcarbamazine citrate

Diethylcarbamazine citrate (DEC) is the main drug used in the lymphatic filariasis treatment. This study aimed to evaluate drug-excipient compatibility of binary mixtures (BMs) (1:1, w/w), initially by differential scanning calorimetry (DSC), and subsequently, if there were any interaction evidence, by complementary techniques, such as thermogravimetric (TG), non-isothermal kinetics, Fourier transform infrared (FT-IR), and X-ray diffraction (XRD). For the analyses of the BMs by DSC, we selected those with Tabletose^®, representing the excipients containing lactose, polivinilpirrolidona (PVP), and magnesium stearate (MgS). The additional analyses by FT-IR and XRD showed no interaction evidence. The TG curves of DEC–Tabletose^® showed no signs of interaction, unlike the TG curves of PVP and MgS, confirming the results of non-isothermal kinetics, in which the BMs with PVP and MgS decreased the reaction activation energy. Thus, it was concluded after evaluation that the excipients, especially the PVP and MgS, should be avoided.     

Comparison of Generic Hydrochlorothiazide Formulations by Means of TG and DSC Coupled to a Photovisual System

The compatibilities and stabilities of some binary mixtures and generic hydrochlorothiazide formulations were studied by using TG, DSC and a DSC-photovisual system. The kinetic parameters were determined via the Arrhenius equations. Tablet B presented higher compatibility and thermal stability than those of tablets A and C. The photovisual system demonstrated that the decomposition of tablet A occurs before the melting point, due to the Maillard reaction between the hydrochlorothiazide and lactose present in the formulation. The behaviour and rate constants of binary mixtures suggest that lactose can be substituted for microcrystalline cellulose, MC(101), in tablet A. The DSC and TG data revealed different characteristics of compatibility and stability in generic formulations from different manufacturers. This revised version was published online in July 2006 with corrections to the Cover Date.     

L-半胱氨酸自组装膜诱导草酸钙结晶研究

在CaCl2.H2O和Na2C2O4配制的过饱和溶液中,利用L-半胱氨酸(L-Cys)在金片上形成的自组装膜为模板,研究了草酸钙(CaOxa)在自组装膜上的结晶行为,并探讨了溶液pH对CaOxa晶体组成、晶型及其形貌的影响。采用X射线衍射(XRD)和扫描电子显微镜(SEM)等技术对CaOxa晶体的结构和形貌进行了表征。实验结果表明:当溶液pH=3.0时,溶液中可以形成一水草酸钙(CaC2O4.H2O,COM)和二水草酸钙(CaC2O4.2H2O,COD)晶体,而在同样pH条件下,在L-Cys自组装膜上只形成COD晶体,表明自组装单层对CaOxa晶体的成核和生长有重要影响。通过改变溶液的pH,在自组装单层上可以得到不同晶型和不同形状的CaOxa晶体。当pH=3.0时得到四方块状的COD晶体,而pH=5.0和pH=7.0时分别得到六边形和拉长六边形的COM晶体。     

Application of time and temperature resolved x-ray diffraction (TRXRD) to thermal analysis

The application of TRXRD for thermal analysis is demonstrated using examples of phase transitions, solid-state reactions and high-temperature corrosion. The measuring system produces a series of diffraction patterns, which are evaluated by a difference procedure that a reduces the data to curves comparable to DSC and TG curves and thus suited to kinetic evaluation.