全二维液相色谱(NPLC×RPLC)接口及其应用

用内径为0.53 mm的填充毛细管正相液相色谱为第一维, 用4.6 mm(i.d.)×50 mm RP-18e整体柱反相色谱为第二维, 建立了定量环-阀切换接口的全二维液相色谱系统(NPLC×RPLC). 第一维色谱分离洗脱出的组分交替存储在十通阀上的两个定量环中, 同时定量环中前一个组分被转移到第二维进行反相分离. 因为第一维的流动相流量仅是第二维的1/500, 自然解决了流动相兼容问题. 采用芳香族化合物的混合物和中药丹参正己烷提取液对该全二维液相系统的分离能力进行了评价.     

色谱最新研究亮点

1 多维分离技术新进展 一维色谱是目前最常用的分离分析方法,然而对于复杂体系如蛋白质组,采用一维分离模式其分离度远远不能满足要求.Giddings理论告诉我们:对于分离机理相互正交的二维分离系统(如色谱),峰的容量应该为两个色谱柱峰容量的乘积.因此,多维分离系统是解决复杂分离体系的一个最佳选择.在多维色谱中二维气相色谱发展较快,目前全二维气相色谱仪业已商品化,其峰的容量达到104以上.而二维液相色谱,尤其是正相/反相二维液相色谱技术发展较为缓慢,其主要的技术瓶颈在于第一维色谱(正相)分离后的流动相严重干扰第二维色谱(反相)的分离.     

高温正相色谱/反相色谱(HTNPLC/RPLC)二维联用系统的构建与应用

为解决含水正相色谱与反相色谱联用过程中的谱带展宽问题,以高温正相色谱(HTNPLC)为第一维,室温反相色谱(RPLC)为第二维,分别建立了切割模式的二维液相色谱(HTNPLC-μRPLC)和全二维液相色谱(HTNPLC×RPLC)系统.样品首先在第一维(CN色谱柱)进行正相分离,第一维洗脱产物选择性地或者交替存储在十通阀上的定量环中,然后切换十通阀将定量环内存储的样品组分转移到第二维(C18色谱柱)进行反相分离.该系统降低了第一维切割组分在第二维柱头的扩散,提高了分离度以及分离效率.采用多环芳烃混合物和天然植物甘草提取液对该二维液相色谱系统进行了评价.     

二维液相色谱(SCX/RP)系统的构建及对珠蛋白水解产物的研究

以十通阀为切换接口, 构建了SCX/RP常规柱二维液相色谱系统, 并以珠蛋白水解产物的分析对其加以评价. 样品首先由第一维阳离子交换色谱(Hypersil SCX, 100 mm×4.6 mm I.D.)在pH 4.0的磷酸盐缓冲体系中分离, 洗脱产物进入切换接口, 样品组分被富集在捕集柱(Hypersil BDS C18, 15 mm×4.6 mm I.D.)中, 进一步脱盐后被导入第二维反相色谱(Hypersil BDS C18, 250 mm×4.6 mm I.D.)分离分析. 阳离子交换色谱采用逐步增加盐浓度的12步台阶等度间断方式洗脱, 每次将洗脱产物捕集在捕集柱中进而由反相色谱分析, 实现对第一维洗脱产物的切割转移及第二维分析. 与一维色谱相比, 二维液相色谱系统的分辨率、峰容量也得到提高, 系统峰容量达到2280.     

全二维液相色谱(IEC/RP)的构建与评价

以IEC/RP模式构建了二维液相色谱系统,采用平行交替柱捕集分析的2位十通切换阀作接口,第一维洗脱产物按10:1的分流比分流后,得到IEC和RP切换谱图.以5个标准蛋白混合物的分离评价该系统,在单独一维模式中不能分离的样品在全二维液相色谱中得到了很好的分离.     

反相高效液相色谱法快速测定7种四环素类抗生素

建立了一种反相高效液相色谱梯度洗脱分离测定四环素类药物的新方法。采用DiamonsilTM C1 8ODS(2 5 0mm× 4 .6mmi.d ,5 μm)色谱柱 ,以甲醇 乙腈 0 .0 1mol/L草酸为流动相 ,流速 1.0mL/min ,2 70nm检测 ,在10min内分离检测四环素等 7种化合物。同时还研究了流动相组成、梯度条件、pH值、草酸浓度等因素对分离效果的影响。     

全二维液相色谱（NPLC×RPLC）接口及其应用

用内径为0．53mm的填充毛细管正相液相色谱为第一维，用4．6mm（i．d．）×50mmRP-18e整体柱反相色谱为第二维，建立了定量环一阀切换接口的全二维液相色谱系统（NPLC×RPLC）．第一维色谱分离洗脱出的组分交替存储在十通阀上的两个定量环中，同时定量环中前一个组分被转移到第二维进行反相分离．因为第一维的流动相流量仅是第二维的1／500，自然解决了流动相兼容问题．采用芳香族化合物的混合物和中药丹参正己烷提取液对该全二维液相系统的分离能力进行了评价．     

离线全二维逆流色谱-液相色谱分离莪术油成分

中药挥发油成分复杂,一维色谱分离由于有限的峰容量难以完全分离中药挥发油成分,全二维气相色谱为分离挥发油成分提供了有力的方法,然而气相色谱一般无法用于天然活性成分的筛选。为建立挥发油成分全二维色谱分析新方法,研究建立以液相色谱为基础的全二维色谱分离分析方法。本文主要研究全二维逆流色谱-液相色谱分离莪术油成分的方法,并探讨两种色谱技术之间的正交性,为活性成分筛选提供新的技术支持。通过优化离线全二维逆流色谱-液相色谱分离方法,对全二维色谱峰容量、正交性和空间覆盖率进行度量。优化液相色谱分析条件并筛选逆流色谱分离两相溶剂体系,通过比色法筛选了逆流色谱两相溶剂体系并采用下相为流动相进行梯度洗脱。在290～375 min采用推挤洗脱,莪术油在第一维逆流色谱分离中达到了良好的分离。第二维反相高效液相色谱的流动相组成为乙腈(A)和水(B)。梯度洗脱程序为0～10 min, 50%A～65%A; 10～14 min, 65%A; 14～21 min, 65%A～85%A; 21～25 min, 85%A～95%A; 25～30 min, 95%A～55%A; 30～40 min, 55%A。在上述条件下...     

六昧地黄丸组分的二维液相色谱分离

以1个常规六通阀直接连接两支常规尺寸的色谱柱(250 mm×4.6 mm i.d.),构建简单的SCX/RP在线二维液相色谱系统,对中成药六味地黄丸组分进行了优化分离.样品经过第一维阳离子交换色谱(Hypersil SCX),洗脱产物分离后通过六通阀直接富集到反相分析柱(C18)顶端,被转移到第二维色谱柱上继续进行分离.经过11步不连续的线性梯度洗脱,二维分离系统出峰数量达到550多个,峰容量达到2266.构建的二维液相色谱系统结构简单,与一维色谱相比,具有分辨率高、峰容量大的特点.     

六味地黄丸组分的二维液相色谱分离

以1个常规六通阀直接连接两支常规尺寸的色谱柱(250 mm×4.6 mm i.d.),构建简单的SCX/RP在线二维液相色谱系统,对中成药六味地黄丸组分进行了优化分离。样品经过第一维阳离子交换色谱(Hypersil SCX),洗脱产物分离后通过六通阀直接富集到反相分析柱(C18)顶端,被转移到第二维色谱柱上继续进行分离。经过11步不连续的线性梯度洗脱,二维分离系统出峰数量达到550多个,峰容量达到2266。构建的二维液相色谱系统结构简单,与一维色谱相比,具有分辨率高、峰容量大的特点。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。