Vinyl polymerizations of norbornene catalyzed by nickel complexes with acetoacetamide ligands

On the basis of a remote effect, a series of acetoacetamide ligands and corresponding nickel complexes N‐(R‐phenyl) acetoacetamide Ni(CH₂Ph) (PMe₃) (R = H, 1 ; R = 2‐methyl, 2 ; R = 2,6‐dimethyl, 3 ; R = 2,6‐diisopropyl, 4 ; R = 4‐NO₂, 5 ) were synthesized and characterized. The solid structure of complex 3 was confirmed by X‐ray single‐crystal analysis to be of cis form. ¹H and ³¹P NMR spectroscopy confirmed that cis and trans isomers of nickel complexes were present in solution. Norbornene polymerizations with acetoacetamide nickel complexes activated with modified methylaluminoxane (MMAO) were investigated in detail. Remote steric and electronic effects of acetoacetamide ligand on catalytic activity and molecular weight of polynorbornenes (PNBs) were observed. Characterizations of the obtained PNBs show that the obtained polymer products are non‐crystalline vinylic‐addition polynorbornenes. Copyright © 2013 John Wiley & Sons, Ltd.     

Functionalization of vinylic addition polynorbornenes via efficient copolymerization of norbornene using Ni(II)‐Me complexes

The facile and efficient functionalization of polynorbornene has been achieved through direct copolymerization of norbornene (NB) with 5‐norbornene‐2‐yl acetate (NBA) or 5‐norbornene‐2‐methanol (NBM) using a series of β‐ketiminato Ni(II)‐Me pyridine complexes 1–4 (Scheme 2 ) in the presence of B(C₆F₅)₃. Remarkably, the monomer conversion could reach up to about 96% in 10 min in the NB/NBA copolymerization. The copolymers with wide NBA contents (3.3–38.4 mol %) were obtained by variation of reaction conditions. These copolymers have high molecular weights (MWs) (M_n = 41.8–144 kg/mol) and narrow MW distributions (M_w/M_n = 1.80–2.27). In the absence of alkyl aluminum compounds, a monomer conversion of 81% was observed in the NB/NBM copolymerization, and copolymers with NBM content in the range of 11.2–21.8 mol % were obtained by variation of reaction conditions. In addition, Ni(II)‐Me pyridine complexes 2 was very active at a low B/Ni molar ratio of 6, while bis‐ligand complex 6 bearing the same ligand just showed moderate efficiency at a high B/Ni molar ratio of 20. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Nickel complexes bearing different electron groups on substituted salicylaldnaphthylmethyleneimine ligands: Syntheses and their catalytic performance for (co)polymerization of norbornene

Novel nickel complexes bearing different electron groups on substituted salicylaldnaphthylmethyleneimine ligands, bis-(salicylaldnaphthylmethyleneimino)Ni(II) (Ni{(3-R¹)(5-R²)C₆H₂(O)CH[N (naphthyl-CH₂)]}₂ Ni1 : R¹ = H, R² = H; Ni2 : R¹ = H, R² = CH₃; Ni3 : R¹ = H, R² = Br; Ni4 : R¹ = H, R² = OCH₃; Ni5 : R¹ = CH₃, R² = H; Ni6 : R¹ = Br, R² = H), were synthesized. Ni2 , Ni3 , Ni5 , and Ni6 are clearly characterized by single-crystal X-ray diffraction. Co-polymerization of norbornene (NB) with 5-norbornene-2-methylene butyl ether (BN) was carried out in toluene with the aforesaid complexes as catalyst precursors and B(C₆F₅)₃ as the co-catalyst. Catalyst activity, molecular weight, thermal stability, solubility, regularity, and optical transparency were investigated, and the mechanism of the electron groups changing catalyst performance is explained. All catalysts show high activity toward co-polymerization (up to 3.53 × 10⁵ g_polymer mol_Ni⁻¹ h⁻¹). Ni3 shows the highest activity and Ni5 shows the highest insertion rate (up to 37.6%). The obtained poly(NB-co-BN)s are confirmed to be vinyl-addition-type co-polymers, and they are noncrystalline. The co-polymers exhibited excellent thermal stability and processability (T_d ≥ 400 °C, T_g < 240 °C), optical transparency (up to 90%), and good solubility.     

Dinuclear nickel (II) complexes bearing two pyrazolylimine ligands: Synthesis characterization, and catalytic properties for vinyl-type polymerization of norbornene

A series of dinickel (II) complexes of bis-2-(C₃HN₂(R₁)₂-3,5)(C(R₂)N(C₆H₃(CH₃)₂-2,6)Ni₂Br₄ (complex 1: R₁ = CH₃, R₂ = Ph; complex 2: R₁ = CH₃, R₂ = 2,4,6-trimethylphenyl; complex 3: R₁ = R₂ = Ph; complex 4: R₁ = Ph, R₂  = 2,4,6-trimethylphenyl) were synthesized and characterized. The solid-state structures of complexes 1, 2 and 3 have been confirmed by X-ray single-crystal analyses to be in the form of a dinuclear and bromine-bridged structure. However, there is an equilibrium that shifts between the monomer and dimmer in toluene based on the characterization of UV-vis spectrophotometry. Activated by methylaluminoxane (MAO), these complexes are capable of catalyzing the polymerization of norbornene with moderate activity up to 6.64 × 10⁵ gPNBE/(molNi·h). The influences of polymerization parameters such as reaction temperature and Al/Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The influence of the bulkiness of the substituents on polymerization activity was also studied. The obtained polynorbornenes were characterized by means of ¹H NMR, FTIR and TG techniques. The analyses results of polymers’ structures indicated that the norbornene polymerization is vinyl-type polymerization rather than ROMP.     

Synthesis of norbornene/divinylbenzene copolymers catalyzed by anilinonaphthoquinone-ligated nickel complexes and their applications for the synthesis of graft polymers

The copolymerization of norbornene (NB) and divinylbenzene (DVB) was carried out using anilinonaphthoquinone-ligated nickel complexes of the type [Ni(C₁₀H₅O₂NAr)(Ph)(PPh₃)] ( 1a : Ar = C₆H₃-2,6- ⁱPr; 1b : Ar = C₆H₂-2,4,6-Me; 1c: Ar = C₆H₅) with modified methylaluminoxane (MMAO) as a cocatalyst. The DVB content was varied (5–25 mol%) and the resulting copolymers exhibited number-average molecular weights (M_n) of 40,000–69,000 g/mol with polydispersities (PDI = 1.5–1.8). The styryl group of the NB/DVB copolymer was used for grafting poly(methyl methacrylate) by reverse atom transfer radical polymerization using azobisisobutyronitrile in the presence of copper chloride and bipyridine.     

Vinyl polymerization of norbornene by mono‐ and trinuclear nickel complexes with indanimine ligands

A series of new indanimine ligands [ArN?CC₂H₃(CH₃)C₆H₂(R)OH] (Ar = Ph, R = Me ( 1 ), R = H ( 2 ), and R = Cl ( 3 ); Ar = 2,6‐i‐Pr₂C₆H₃, R = Me ( 4 ), R = H ( 5 ), and R = Cl ( 6 )) were synthesized and characterized. Reaction of indanimines with Ni(OAc)₂·4H₂O results in the formation of the trinuclear hexa(indaniminato)tri (nickel(II)) complexes Ni₃[ArN = CC₂H₃(CH₃)C₆H₂(R)O]₆ (Ar = Ph, R = Me ( 7 ), R = H ( 8 ), and R = Cl ( 9 )) and the mononuclear bis(indaniminato)nickel (II) complexes Ni[ArN?CC₂H₃(CH₃)C₆H₂(R)O]₂ (Ar = 2,6‐i‐Pr₂C₆H₃, R = Me ( 10 ), R = H ( 11 ), and R = Cl ( 12 )). All nickel complexes were characterized by their IR, NMR spectra, and elemental analyses. In addition, X‐ray structure analyses were performed for complexes 7 , 10 , 11 , and 12 . After being activated with methylaluminoxane (MAO), these nickel(II) complexes can polymerize norbornene to produce addition‐type polynorbornene (PNB) with high molecular weight M_v (10⁶ g mol^?1), highly catalytic activities up to 2.18 × 10⁷ gPNB mol^?1 Ni h^?1. Catalytic activities and the molecular weight of PNB have been investigated for various reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 489–500, 2008     

Nickel and cobalt complexes bearing β‐ketoamine ligands: syntheses,structures and catalytic behavior for norbornene polymerization

Late transition metal (nickel, cobalt) complexes (1, 2) with β‐ketoamine ligand (L) based on the pyrazolone derivative are synthesized by condensing 1‐phenyl‐3‐methyl‐4‐benzoyl‐5‐pyrazolone with p‐fluoroaniline, and then treating the β‐ketoamine (L) produced with the respective metal halide. The bis(β‐ketoamine)metal complexes can act as catalyst precursors for norbornene polymerization with activation by methylaluminoxane. The effects of the central metal variation in the complex on catalyst activities and polymer microstructure are described. Copyright © 2005 John Wiley & Sons, Ltd.     

Vinylic polymerization of norbornene by neutral nickel(II)‐based catalysts

Neutral Ni(II) salicylaldiminato complexes activated with modified methylaluminoxane as catalysts were used for the vinylic polymerization of norbornene. Catalyst activities of up to 7.08 × 10⁴ kg_pol/(mol_Ni · h) and viscosity‐average molecular weights of polymer up to 1.5 × 10⁶ g/mol were observed at optimum conditions. Polynorbornenes are amorphous, soluble in organic solvents, highly stable, and show glass‐transition temperatures around 390 °C. Catalyst activity, polymer yield, and polymer molecular weight can be controlled over a wide range by the variation of the reaction parameters such as the Al/Ni ratio, monomer/catalyst ratio, monomer concentration, polymerization reaction temperature, and time. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2680–2685, 2002     

Vinyl polymerization of norbornene by nickel(II) complexes bearing β‐diketiminate ligands

Norbornene polymerizations were carried out using nickel(II) bromide complexes CH{C(R)NAr}₂NiBr ( 1 , R = CH₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 2 , R = CH₃, Ar = 2, 6‐Me₂C₆H₃; 3 , R = CF₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 4 , R = CF₃, Ar = 2, 6‐Me₂C₆H₃) in the presence of methylaluminoxane. Compound 3 is the most active norbornene polymerization catalyst of all the nickel complexes tested. The activity of theses catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. The resulting polynorbornenes are vinyl type by IR and NMR analyses. Copyright © 2007 John Wiley & Sons, Ltd.     

[N,N]-二齿镍配合物催化烯烃聚合

烯烃聚合催化剂的设计是烯烃配位聚合领域的一个核心科学问题,通过设计合成精确结构的催化剂可以有效地调控催化聚合性能以及聚合产物的结构.后过渡金属催化剂由于其易调变性、对聚合产物支化结构的可控性及对极性单体的容忍性,在烯烃聚合领域引起了广泛的关注.本文介绍了近年来本课题组在[N,N]-二齿镍烯烃聚合催化剂设计方面的研究进展,包括四元环的中性脒基镍催化剂、五元环的-二亚胺镍催化剂、2-胺基吡啶和-胺基亚胺系列镍催化剂,以及六元环的-二亚胺和苯胺基亚胺镍催化剂在烯烃聚合的应用.通过优化后过渡金属镍催化剂结构,可成功实施烯烃活性聚合.     

Nickel(II) complexes bearing pyrazolylimine ligand: synthesis,structure, and catalytic properties for vinyl‐type polymerization of norbornene

Two nickel(II) complexes of {2‐[C₃HN₂(R₁)₂‐3,5]}[C(R₂)?N(C₆H₃ⁱPr₂‐2,6)]NiBr₂ (complex 1 : R₁ = CH₃, R₂ = 2,4,6‐trimethylphenyl; complex 2 : R₁ = R₂ = Ph) were synthesized and characterized. The solid‐state structure of complex 1 has been confirmed by X‐ray single‐crystal analysis. Activated by methylaluminoxane (MAO), complexes 1 and 2 are capable of catalyzing the polymerization of norbornene with moderate activities [up to 10.56 × 10⁵ gPNBE (mol Ni h)^?1] with high molecular weights (M_w?13.56 × 10⁵ g mol^?1) and molecular weight distributions were around 2. The influences of polymerization parameters such as reaction temperature and Al–Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The obtained polynorbornenes were characterized by means of ¹H‐NMR and FTIR techniques. The analytical results of polymer structures indicated that the norbornene polymerization is vinyl‐type polymerization rather than ROMP. Copyright © 2009 John Wiley & Sons, Ltd.     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

含N-萘基中性镍催化剂的合成及催化降冰片烯聚合反应

本文合成了两个新的催化剂，苯基-三苯基膦-[N-萘基-3-甲基水杨醛亚胺]合镍(4a)与苯基-三苯基膦-[N-萘基-5-硝基水杨醛亚胺]合镍(4b)，并研究了它们催化降冰片烯的聚合。发现两种催化剂在助催化剂甲基铝氧烷(MAO)存在下都具有良好的催化降冰片烯聚合物活性。在50 ℃时，催化剂4b表现出最高催化活性。     

Addition copolymerization of norbornene lactone catalyzed by Pd complexes

The addition copolymerization of norbornene (NB) with functionalized monomers can lead to the modification of physical properties of poly(NB). Herein, the synthesis of new copolymer of NB with exo-norbornene lactone (exo-NBL) is reported. The copolymerization proceeded by four Pd catalytic systems, and of these, Pd(allyl)IDippCl/AgSbF₆ (IDipp = 1,3-bis[2,6-diisopropylphenyl]imidazolin-2-ylidene)) was the most effective for the incorporation of exo-NBL. Specifically, the copolymerization with exo-NBL/NB feed ratio of 50/50 at r.t. by 0.1 mol% of the Pd catalyst produced poly(NB-co-exo-NBL) with M_n of 87,000, and M_w/M_n of 1.2 in 40% yield, incorporating exo-NBL of 18 mol%. The time–conversion plots and ¹H diffusion ordered spectroscopy (DOSY) NMR analysis of the copolymer suggest that it has a random sequence. In contrast, no copolymer was formed from endo-NBL. This is because of steric hindrance of the endo-lactone moiety by considering the (co)polymerization of endo-5-norbornene-2-carboxylic acid methyl ester (endo-NBCO₂Me). The incorporation of exo-NBL improves the solubility of poly(NB-co-exo-NBL) in several chlorinated solvents and gives high thermal stability with 10% weight loss at a temperature of more than 400°C. Two amorphous halos corresponding to intra- and interchain distances were observed in the WAXD patterns, allowing to calculate d-spacing values, which are higher than that of poly(NB).     

Synthesis and characterization of new bis(1-aryliminomethylenylnaphthalen-2-oxy)nickel complexes and their catalytic behavior for vinyl polymerization of norbornene

The synthesized 1-aryliminomethylenylnaphthalen-2-ol derivatives reacted with nickel chloride to form bis(1-aryliminomethylenylnaphthalen-2-oxy)nickel complexes. All resultant compounds were structurally characterized by elemental analyses, IR and H NMR, and the structures of the formed complexes were elucidated by X-ray crystal structure analysis. The complexes show high catalytic activities for the vinyl polymerization of norbornene in the presence of methylaluminoxane. The catalytic activity variations have been followed by gas chromatography through monitoring the conversion of norbornene.     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003     

Pd(II) complexes bearing di‐ and monochelate fluorinated β‐ketonaphthyliminato ligand and their catalytic properties towards vinyl‐addition polymerization and copolymerization of norbornene and ester‐functionalized norbornene derivative

Fluorinated β‐ketonaphthyliminate ligand CF₃C(O)CHC[HN(naphthyl)]CH₃ ( L1 ) and Pd(II) complexes with dichelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}₂Pd ( C1 ), as well as with monochelate fluorinated β‐ketonaphthyliminato ligand, {CF₃C(O)CHC[N(naphthyl)]CH₃}Pd(CH₃)(PPh₃) ( C2 ), were synthesized and their solid‐state structures were confirmed using X‐ray crystallographic analysis. The Pd(II) complexes were employed as precursors to catalyze norbornene (NB) homo‐ and copolymerization with ester‐functionalized NB derivative using B(C₆F₅)₃ as a co‐catalyst. High activity up to 2.3 × 10⁵ g_polymer mol_Pd^?1 h^?1 for the C1 /B(C₆F₅)₃ system and 3.4 × 10⁶ g_polymer mol_Pd^?1 h^?1 for the C2 /B(C₆F₅)₃ system was exhibited in NB homopolymerization. Moreover, the Pd(II) complexes exhibited a high level of tolerance towards the ester‐functionalized MB monomer. In comparison with the C1 /B(C₆F₅)₃ system, the C2 /B(C₆F₅)₃ system exhibited better catalytic property towards the copolymerization of NB with 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃), and soluble vinyl‐addition‐type copolymers were obtained with relatively high molecular weights (3.6 × 10⁴–7.5 × 10⁴ g mol^?1) as well as narrow molecular weight distributions (1.49–2.15) depending on the variation of monomer feed ratios. The NB‐COOCH₃ insertion ratio in all copolymers could be controlled in the range 2.8–21.0 mol% by tuning a content of 10–50 mol% NB‐COOCH₃ in the monomer feed ratios. Copolymerization kinetics were expressed by the NB and NB‐COOCH₃ monomer reactivity ratios: r_NB‐COOCH3 = 0.18, r_NB = 1.28 were determined for the C1 /B(C₆F₅)₃ system and r_NB‐COOCH3 = 0.19, r_NB = 3.57 for the C2 /B(C₆F₅)₃ system using the Kelen–Tüdõs method. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and catalytic activity of neutral salicylaldiminato nickel(II) complexes bearing a single N-heterocyclic carbene ligand

Neutral salicylaldiminato Ni(II) complexes bearing a single N-heterocyclic carbene (NHC) ligand [3,5-^tBu₂-2-(O)C₆H₂CHNAr]Ni(C{RNCHCHNⁱPr})Ph [Ar = 2,6-ⁱPr₂C₆H₃, R = Bn (1); Ar = 2,6-ⁱPr₂C₆H₃, R = ⁱPr (2)], have been synthesized via a one-pot procedure in high yield. The X-ray structure analysis reveals that both of 1 and 2 adopt distorted square-planar coordination geometry and NHC carbon (C_carbene) is trans to the ketimine nitrogen. Preliminary study indicates that complex 1 is inert toward the insertion of ethylene, however, it can catalyze the dimerization of ethylene in the presence of modified methylaluminoxane (MMAO) with a moderate activity of 3.05 × 10⁴ g(mol Ni)⁻¹ h ⁻¹ atm⁻¹ in a highly selective fashion.     

Novel titanium complexes bearing two chelating phenoxy‐imine ligands and their catalytic performance for ethylene polymerization

Three substituted salicylaldimine ligands ( 1a, 2a, 3a ) and their titanium complexes bis[N‐(5‐nitrosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 1 ), bis[N‐(5‐chlorosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 2 ) and bis[N‐(5‐bromosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 3 ) were synthesized and characterized by mass spectra, ¹H NMR and elemental analyses, as well as complex 1 by X‐ray structure analysis. In the presence of methylaluminoxane (MAO), 1, 2 and 3 are efficient catalysts for ethylene polymerization in toluene. Under the conditions of T = 60 °C, p = 0.2 MPa, and n(MAO)/n(cat) = 1500, the activities of 1–3 reached 4.55–8.80 × 10⁶ g of PE (mol of Ti h bar)^?1, which is much higher than that of the unsubstituted complex bis[N‐(salicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 4 ). The viscosity‐average molecular weight of polyethylene ranged from 24.8 × 10⁴ to 44.9 × 10⁴ g/mol for 1–3 and the molecular weight distribution M_w/M_n from 1.85 to 2.34. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature are favorable for 1–3 /MAO to rise the catalytic activity and the molecular weight of polyethylene. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of anilinonaphthoquinone-based nickel complexes and their application for olefin polymerization

A series of anilinonaphthoquinone-based nickel complexes, Ni(C₁₀H₅O₂NAr)(Ph)(PPh₃) (Ar = C₆H₃-2,6-Me (1c); Ar = C₆H₂-2,4,6-Me (2c); Ar = C₆H₃-2,6-Et (3c)), were synthesized and the structures of 1c-3c were confirmed by single crystal X-ray analyses. The anilinonaphthoquinone-ligated nickel complexes activated with B(C₆F₅)₃ showed high activities for ethylene polymerization at 40 °C under atmospheric pressure of ethylene and gave polyethylene with long chain branches and short chain branches. The activity of these systems was decreased by lowering polymerization temperature accompanied by increase in molecular weight. The number of the chain branches was also decreased with lowering polymerization temperature and increasing the bulkiness of the ligand.