Simulation approach to decomposition kinetics and thermal hazards of hexamethylenetetramine

The thermal stability of HMT under dynamic, isothermal and adiabatic conditions was investigated using differential scanning calorimeter (DSC) and accelerating rate calorimeter (ARC), respectively. It is found from the dynamic DSC results that the exothermic decomposition reaction appears immediately after endothermic peak, a coupling phenomenon of heat absorption and generation, and the endothermic peak and exothermic peak were indentified at about 277–289 and 279–296 °C (T_peak) with the heating rates 1, 2, 4 and 8 °C min⁻¹. The ARC results reveal that the initial decomposition temperature of HMT is about 236.55 °C, and the total gas production in decomposition process is 6.9 mol kg⁻¹. Based on the isothermal DSC and ARC data, some kinetic parameters have been determined using thermal safety software. The simulation results show that the exothermic decomposition process of HMT can be expressed by an autocatalytic reaction mechanism. There is also a good agreement between the kinetic model and kinetic parameters simulated based on the isothermal DSC and ARC data. Thermal hazards of HMT can be evaluated by carrying out thermal explosion simulations, which were based on kinetic models (Isothermal DSC and ARC) to predict several thermal hazard indicators, such as T_D24, T_D8, TCL, SADT, ET and CT so that we can optimize the conditions of transportation and storage for chemical, also minimizing industrial disasters.

     

Polycycloalkylene-siloxane polymers: Synthesis and thermal study

Based on dicyclopentadiene and silacyclopentene, two linear polycycloalkylene-siloxane polymer systems have been synthesized and the thermal stability of the raw polymers evaluated by differential scanning calorimetry and thermal gravimetric analysis. The DSC data in nitrogen indicate that both polymer systems have excellent thermal stability. In air, these polymers begin to oxidize at approximately 150°C, with catastrophic oxidation occurring at about 400°C.     

Characterization,crystallization kinetics,and melting behavior of poly(ethylene succinate) copolyester containing 10 mol % butylene succinate

Copolyester was synthesized and characterized as having 89.9 mol % ethylene succinate units and 10.1 mol % butylene succinate units in a random sequence, as revealed by NMR. Isothermal crystallization kinetics was studied in the temperature range (T_c) from 30 to 73 °C using differential scanning calorimetry (DSC). The melting behavior after isothermal crystallization was investigated using DSC by varying the T_c, the heating rate and the crystallization time. DSC curves showed triple melting peaks. The melting behavior indicates that the upper melting peaks are associated primarily with the melting of lamellar crystals with various stabilities. As the T_c increases, the contribution of recrystallization slowly decreases and finally disappears. A Hoffman‐Weeks linear plot gives an equilibrium melting temperature of 107.0 °C. The spherulite growth of this copolyester from 80 to 20 °C at a cooling rate of 2 or 4 °C/min was monitored and recorded using an optical microscope equipped with a CCD camera. Continuous growth rates between melting and glass transition temperatures can be obtained after curve‐fitting procedures. These data fit well with those data points measured in the isothermal experiments. These data were analyzed with the Hoffman and Lauritzen theory. A regime II → III transition was detected at around 52 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2431–2442, 2008     

DSC Research on Critical Temperature in Thermal Explosion Synthesis Reaction Ti+3Al→TiAl3

The critical furnace chamber temperature (T′_ign) of the thermal explosion synthesis reaction Ti+3Al→TiAl₃ is studied by isothermal and non-isothermal DSC. The reaction product is characterized by using the X-ray powder diffraction. The value of T′_ign is between 740 and 745°C obtained from the isothermal DSC observations, and 729°C obtained from non-isothermal DSC curves. It shows that these two values have a good consistency. With the help of the apparent activation energy of the reaction obtained by Friedman method and the value of T′_ign0 by the multiple linear regression of the T′_igns at different heating rates (β), the critical temperature (T _b) of thermal explosion for Ti–75at%Al mixture is estimated to be 785°C. This revised version was published online in August 2006 with corrections to the Cover Date.     

Spherulite growth rates of in situ prepared poly(propylene terephthalate)/SiO2 nanocomposites

The spherulite growth rates of in situ prepared PPT/SiO₂ nanocomposites containing 2–5 wt% nano-silica were studied. Measurements of the spherulite growth rates were carried out by applying non-isothermal experiments using polarized light microscopy (PLM). Comparison with results from isothermal PLM tests showed good agreement. Isothermal crystallizations after self-nucleation were also performed using differential scanning calorimetry (DSC) and the inverse crystallization half-times were estimated. The Lauritzen–Hoffman analysis was applied by using data from both isothermal and non-isothermal PLM experiments and the DSC results. Regimes II–III transition were observed at critical breakpoint close to 195 °C. The regimes I–II transition was not so clear, because of the semi-rigid macromolecular chains of the polymers. Results using DSC data were in satisfactory agreement to those using PLM spherulite growth data.     

Cure Kinetics Study of Two Epoxy Systems with Fourier Tranform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC)

This work was aimed at the study of cure kinetics of two commercial thermosetting epoxy systems, Epikote resin 816 LV/Epikure F205 and Epikote resin 240/Epikure F205, by Fourier Tranform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC). The studied systems consist of a resin (A), based on a diglycidyl ether of bisphenol A and a hardener (B) based on the Isophorodiamine (IPDA) a cycloaliphatic diamine. These systems are used for the building and civil engineering industries, e.g. flooring compounds, adhesives, mortars and grouts. FTIR spectroscopy was employed to investigate the isothermal curing kinetics at 30, 50 or 70°C and DSC analysis to study the non-isothermal curing kinetics at different heating rates 2.5, 5, 10 and 20°C/min, from 20 to 300°C. A kinetic model was employed to simulate the FTIR isothermal experimental data using two kinetic rate constants and incorporating also diffusion control at high degrees of conversion. Finally, the variation of the effective activation energy with the extent of curing was estimated using isoconversional analysis of non-isothermal DSC data.     

Application of DSC, IST, and FTIR study in the compatibility testing of nateglinide with different pharmaceutical excipients

Experiments were done to assess the compatibility of nateglinide (NTG) with selected excipients in the development of immediate release tablets of NTG by thermal and isothermal stress testing (IST) techniques. To evaluate the drug excipient compatibility, different techniques such as differential scanning calorimetric (DSC) study, infrared (IR) spectrophotometric study, and IST were adopted. The results of DSC study showed that magnesium stearate exhibited some interaction with NTG. However, the results of IR and IST studies showed that all the excipients used in the formula were compatible with NTG. The optimized formulation developed using the compatible excipients were found to be stable after 3 months of accelerated stability studies (40 ± 2 °C and 75 ± 5% RH). Overall, compatibility of excipients with NTG was successfully evaluated using the combination of thermal and IST methods and the formulations developed using the compatible excipients was found to be stable.     

Thermal degradation of styrene-butadiene diblock copolymer: Part 1—Characteristics of polystyrene and polybutadiene degradation

Polystyrene, polybutadiene and diblock styrene-butadiene copolymer have been prepared, using sec-butyllithium as initiator, and characterised. Techniques required in an investigation of the degradation of the copolymer have first been applied to the two homopolymers. Degradations have been carried out under temperature programmed conditions at a heating rate of 10°/min, using TG and DSC in dynamic nitrogen and TVA (vacuum), and also isothermal TG and TVA at 380°C. The volatile product fractions have been separated by subambient TVA to facilitate identification of the various products. Volatile and cold ring fractions from isothermal degradation have been measured quantitatively by an improved gravimetric technique using the TVA system. Infra-red and nuclear magnetic resonance spectroscopy and mass spectrometry have been used to characterise the main product fractions. A new adsorption TVA method has allowed methane and hydrogen to be identified as constituents of the small amount of non-condensable gases formed in polybutadiene degradation.     

Thermal compatibility between hydroquinone and retinoic acid in pharmaceutical formulations

Thermogravimetry (TG) and differential scanning calorimetry (DSC) are used in pharmaceutical studies for characterization of drugs, purity, compatibility of formulations, identification of polymorphism, evaluation of stability, and thermal decomposition of drugs and pharmaceutical formulations. Hydroquinone (HQ) and products containing HQ have been widely used as depigmentation agents for lightening the skin. Retinoids are compounds that have the basic core structure of vitamin A and its oxidized metabolites, or synthetic compounds that share similar mechanisms of action as naturally occurring retinoids. Depigmentants and excipients were analyzed by TG and DSC. The dynamic thermogravimetric curves were obtained on a SHIMADZU thermobalance, model DTG-60, using an alumina crucible, at the heating rate of 10 °C min^?1, in the temperature range of 25–900 °C, under an atmosphere of nitrogen at 50 mL min^?1. The sample's mass was 10 ± 0.05 mg. The DSC curves were obtained using Shimadzu calorimeter, model DSC-60, using aluminum crucible, at the heating rate of 10 °C min^?1, in the temperature range of 25–400 °C. The thermogravimetric and calorimetric curves were analyzed using TASYS software SHIMADZU. In this study were found the interaction between retinoic acid (RA) and the following excipients: cetyl alcohol(CA), cetostearyl alcohol (CTA), glycerin(GLY), and dipropylene glycol (DPG), and that between HQ and the excipient, DPG. Therefore, additional studies are necessary to evaluate final formulations. Thermal analysis is an effective and reliable technique that can be used in the control of raw materials and pharmaceutical products, and for evaluating their employment potential in the development and characterization of products.     

Thermal decomposition of methylxanthines

The thermal decomposition of theophylline, theobromine, caffeine, diprophylline and aminophylline were evaluated by calorimetrical, thermoanalytical and computational methods. Calorimetrical studies have been performed with aid of a heat flux Mettler Toledo DSC system. 10 mg samples were encapsulated in a 40 μL flat-bottomed aluminium pans. Measurements in the temperature range form 20 to 400°C were carried out at a heating rate of 10 and 20°C min⁻¹ under an air stream. It has been established that the values of melting points, heat of transitions and enthalpy for methylxanthines under study varied with the increasing of heating rate. Thermoanalytical studies have been followed by using of a derivatograph. 50, 100 and 200 mg samples of the studied compounds were heated in a static air atmosphere at a heating rate of 3, 5, 10 and 15°C min⁻¹ up to the final temperature of 800°C. By DTA, TG and DTG methods the influence of heating rate and sample size on thermal destruction of the studied methylxanthines has been determined. For chemometric evaluation of thermoanalytical results the principal component analysis (PCA) was applied. This method revealed that first of all the heating rate influences on the results of thermal decomposition. The most advantageous results can be obtained taking into account sample masses and heating rates located in the central part of the two-dimensional PCA graph. As a result, similar data could be obtained for 100 mg samples heated at 10°C·min⁻¹ and for 200 mg samples heated at 5°C min⁻¹.     

Chain-backbone motion in glassy polycarbonate studied by polarized infrared spectroscopy

Chain-backbone motion in glassy polycarbonate has been investigated both under isothermal stress, and also under zero stress during isothermal annealing of freely contracting film specimens. In both types of experiment, backbone motion was detected by measuring the change in infrared dichroism. The dichroism of absorption bands at 1364 and 2971 cm^?1, which have transition moment vectors directly related to the chain-backbone orientation, was studied. Under tensile stress in the homogeneous region of deformation, changes of up to 2.2° in the mean chain-backbone orientation angle were measured at 23°C. With the onset of cold drawing a total orientation change of some 8° was observed. For the isothermal annealing experiments, a film specimen holder employing conductive heating with radiative losses was employed. It enables infrared measurements to be made while the temperature of the contracting specimen is maintained constant to ± 0.5°C. Oriented specimens were prepared by isothermal stretching of polycarbonate films to strains of the order of 100%. Changes in the mean chain-backbone orientation angle were observed during annealing of these oriented films at temperatures between 80°C and the glass transition (149°C). Chain motion proceeded during annealing, and chain segments were observed to move cooperatively. The temperature at which the polymer is prestretched has a pronounced effect on its subsequent relaxation during annealing: when the sample was stretched at 23°C. motions were detected during annealing at temperatures as low as 81°C, while, if it was stretched at 154°C, no motion was detected at annealing temperatures below 127°C. The data are discussed in comparison with theories of the glassy state that predict the absence of chain-backbone motion at temperatures significantly below the glass transition. A shift in frequency of the ν_a (CH₃) absorption peak in stretched polycarbonate was measured by using polarized radiation. The effect was interpreted in terms of changes in the intermolecular bonding structure of the oriented polymer.     

Isothermal and Non-Isothermal Crystallization Kinetics and Morphology of Poly(trimethylene terephthalate)/Multiwalled Carbon Nanotube Composites

Summary: Multiwalled carbon nanotubes (MWCNTs) synthesized using chemical vapor deposition method were dispersed in poly(trimethylene terephthalate) (PTT, Mv = 88,000) by melt compounding technique using DMS microcompounder. The nanocomposites consisting of varying amounts of MWCNTs were characterized by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The effect of carbon nanotubes on the crystallization behavior (under isothermal and non isothermal crystallization conditions) of PTT was studied using DSC. The presence of carbon nanotubes didn't show any significant effect on crystallization temperature of PTT matrix under non-isothermal conditions. Crystallization studies under isothermal conditions were carried out at different temperatures i.e 185, 190, 195 and 200 °C. Complete crystallization was observed within 60 sec at 185 °C whereas at 200 °C, longer time was required for complete crystallization. Crystal growth was also investigated using hot stage polarizing microscope (PLM). The effect of annealing time at 200 °C was investigated in the presence as well as in the absence of varying amounts of MWCNTs. Spherulitic growth was seen and the spherulite size in all the samples increased with annealing time. Morphological characterization using SEM and TEM showed a uniform dispersion of MWCNTs and poor compatibility with PTT matrix.     

Liquid Formulations for Long-Term Storage of Monoclonal IgGs

Proteins like immunoglobulin (IgGs) are prone to degradation by a variety of pathways. In this study, a stabilizing formulation for long-term storage of a panel of seven monoclonal IgGs was found using differential scanning calorimetry (DSC). In the chosen formulations, the IgGs were subjected to stress, accelerated and real-time storage, and analyzed by size exclusion chromatography to determine fragment and aggregate content, and fluorescence-activated cell sorting to measure immunoreactivity. All IgGs showed the greatest conformational stability near their isoelectric point which was enhanced by adding sorbitol, sucrose, glycine, and sodium chloride. Optimized formulations, found by DSC, containing 20 % sorbitol and 1 M glycine prevented IgG aggregation and fragmentation and conserved immunoreactivity against shear stress, multiple freeze–thaw cycles, accelerated storage at 37 °C, and 12 months storage at 4 and ?20 °C. Relatively poor thermal stability of the antigen-binding fragment domain was shown to limit storage stability of IgGs. This study confirms the predictive power of DSC to find storage formulations which protect IgGs during stress and long-term storage from aggregation and degradation. Liquid formulations found in this study may have a broad utility for other IgGs.     

Thermal analysis of polyesters containing oxirane groups

The preliminary studies of the thermal behaviour of polyester obtained in polycondensation process of cyclohex-4-ene-1,2-dicarboxylic anhydride and ethylene glycol and its new epoxidized form have been performed. The thermal characterization of initial polyester and its completely oxidized form was done by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TG). The non-isothermal DSC was applied to determine the influence of time and the temperature on the chemical modification of initial polyester using 38-40% solution of peracetic acid. On the basis of DSC profiles it has been found that the endothermic transition, due to the degradation process of initial polyester was characteristic feature under controlled heating program. The two characteristic transitions for the new epoxidized polyester, the exothermic peak corresponded to the thermal crosslinking of epoxidized polyester (322.8–336.4°C) and the endothermic decomposition peak of the cured material (363.8–388.9°C) were observed. The peak maximum temperatures (Tmax) and the heat of cross-linking reaction (ΔH_c) for epoxypolyester prepared at 20–60°C under 1–4 h were evaluated. The Tmax1 were almost independent from epoxidation conditions, while, the values of ΔH_c were dependent from conditions of synthesis. The ΔH_c values of this process decreased when time of oxidation increased. The highest values of ΔH_c at 40°C were obtained. Additionally, TG experiments confirmed two separated degradation steps of the new epoxidized polyester indicating the ester (370–380°C) and ether (450–460°C) bond breakdown.     

Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

Vapor-liquid equilibrium for the systems ethyl formate-methyl ethyl ketone,ethyl formate-toluene and ethyl formate-methyl ethyl ketone-toluene: new unifac parameters for interactions between the groups ACH/HCOO,ACCH2/HCOO and CH2Co/HCOO

Vapor-liquid equilibrium data are presented for the binary systems ethyl formate-methyl ethyl ketone (MEK) at 40°C and 50 °C and ethyl formate-toluene at 48°Cand 51°C and for the ternary system ethyl formate-MEK-toluene at 50°C. The measurements were carried out in a recirculation still similar to that proposed by Röck and Sieg. Vapor pressures of the pure substances were measured and the data correlated using the Antoine equation. The binary data were reduced by means of a maximum-likelihood procedure providing the relevant Margules, NRTL and UNIQUAC parameters.New UNIFAC interaction parameters between the groups ACH/HCOO, ACCH₂/HCOO and CH₂CO/HCOO have been obtained. These parameters have been used to predict the ternary data, and a comparison between the experimental and predicted values is presented.     

Effect of neutralization and cross-linking on the thermal degradation of chitosan electrospun membranes

Thermal degradation of as-electrospun chitosan membranes and samples subsequently treated with ethanol and cross-linked with glutaraldehyde has been studied by thermogravimetry (TG) coupled with an infrared spectrometer. The influence of the electrospinning process and cross-linking in the electrospun chitosan thermal stability was evaluated. Up to three degradation steps were observed in the TG data, corresponding to water dehydration reaction at temperatures below 100 °C, loss of side groups formed between the amine groups of chitosan and trifluoroacetic acid between 150 and 270 °C and chitosan thermal degradation that starts around 250 °C and goes up to 400 °C. The Kissinger model was employed to evaluate the activation energies of the electrospun membranes during isothermal experiments and revealed that thermal degradation activation energy increases for the samples processed by electrospinning and subsequent neutralization and cross-linking treatments with respect to the neat chitosan powder.     

Thermal and oxidative stability of Sacha Inchi oil and capsules formed with biopolymers analyzed by DSC and <Superscript>1</Superscript>H NMR

The oxidative stability of edible oils is an important feature to know due the undesirable changes that can occur in the storage. In this way, the oxidative induction time (OIT) value is an indicative to prevent this effect. The objectives of this study were to evaluate the omega-3 content and kinetic parameters of Sacha Inchi oil (SIO) and capsules that are formed with biopolymers, in addition, there were analyzed with differential scanning calorimetry (DSC) and proton nuclear magnetic resonance (¹H NMR). The SIO and capsules, formed using an emulsion, were analyzed with DSC in an oxygen atmosphere to determine the OIT value in isothermal conditions at 100, 120 and 150 °C. The kinetic parameters (activation energy, pre-exponential factor and z value) of SIO were obtained, and the stability time was predicted at different temperatures. The ¹H NMR spectra enabled us to assess the identification and percentage relative before and after the isothermal DSC oxidation of omega-3 concentration and formation of their oxidized compounds. (E-E)-2,4-Alkadienals were the primary oxidized compound and is strongly correlated with the decrease in omega-3 content. Isothermal DSC is a useful to determine the OIT (min) and kinetic parameters to predict the stability oxidation in different edible oils and thus prevent the inadequate consumption of edible oils oxidized.     

Dynamic mechanical properties of two copolymers of styrene and n-hexyl methacrylate

The storage (J′) and loss (J″) shear compliances have been measured for two random copolymers of styrene and n-hexyl methacrylate with styrene contents of 18% and 30% (by weight) in the frequency range 45–4400 Hz and the temperature range 31–107°C. The data at different temperatures were combined by the method of reduced variables, and the WLF coefficients were calculated from the temperature shift factors by the method of Pierson and Kovacs. The data were compared with earlier data for the two homopolymers. The thermal expansion coefficient of the fractional free volume, and the free volume at the glass transition temperature, varied monotonically with composition, but the fractional free volume at a reference temperature of 100°C appeared to pass through a maximum as a function of concentration. Comparison of isothermal plots of J′ at 100°C, plots of the relaxation spectrum at 100°C, the monomer friction coefficient and its temperature dependence, and isochronal plots of the storage shear moduls at 100 radians/see all show that the properties of poly(n-hexyl methacrylate) are very slightly affected by incorporation of 18% styrene and only moderately affected by 30% styrene. By contrast, comparison of styrene–butadiene rubber with 1,4-polybutadiene shows a very large effect of incorporation of 23.5% styrene. These differences may be associated with local packing relations of the comonomer residues and suggest that copolymer properties cannot be readily predicted from those of the component homopolymers.     

Thermal analysis of contemporary glass-ionomer restorative materials

The thermal characteristics of four conventional glass-ionomer cement (GIC) dental restorative products as well as five resin-modified glass-ionomer (RMGI) materials over 1-year of storage were investigated. All materials were prepared following manufacturer’s recommendations and placed into 40 μL aluminum differential scanning calorimeter (DSC) crucibles. Samples (n = 5) were stored at 37 °C and 98 ± 2 % humidity until their appointed time of evaluation at which they were first subjected to specific heat analysis using DSC over 20–60 °C that was immediately followed by a 37–600 °C thermal scan at 10 °C min^?1. Samples were evaluated immediately after preparation, at 24 h, 1 week, 1 month, as well as at 3, 6, 9, and 12 months. Mean thermal results were compared with analysis of variance and Scheffe post-hoc testing (p = 0.05). All materials absorbed water during storage. Conventional GIC materials demonstrated increased polyalkenoate polymer maturity over the 12-month storage. The paste–paste RMGI materials, absorbed more water during storage and had increased specific heat values compared to powder–liquid RMGI materials. Of the RMGI materials investigated, only two materials demonstrated evidence of a continuing polyalkenoate matrix maturity that was within the limitations of the technology used, indicating the resin component in some newer formulations of RMGI restorative materials may severely limit the polyalkenoate reaction.