Enthalpy and entropy effects in hydrogen adsorption on carbon nanotubes

Interaction energies and entropies associated with hydrogen adsorption on the inner and outer surfaces of zigzag single-wall carbon nanotubes (SWCNT) of various diameters are analyzed by means of molecular mechanics, density functional theory, and ab initio calculations. For a single molecule the strongest interaction, which is 3.5 greater than that with the planar graphite sheet, is found inside a (8,0) nanotube. Adsorption on the outer surfaces is weaker than that on graphite. Due to the steric considerations, both processes are accompanied by an extremely strong decline in entropy. Absence of specific adsorption sites and weak attractive interaction between hydrogen molecules within carbon nanotubes results in their close packing at low temperatures. Using the calculated geometric and thermodynamic parameters in Langmuir isotherms we predict the adsorption capacity of SWCNTs at room temperature to be smaller than 1 wt % even at 100 bar.     

The effect of atomic hydrogen adsorption on single-walled carbon nanotubes properties

We investigated the adsorption of hydrogen atoms on metallic single-walled carbon nanotubes using ab initio molecular dynamics method. It was found that the geometric structures and the electronic properties of hydrogenated SWNTs can be strongly changed by varying hydrogen coverage. The circular cross sections of the CNTs were changed with different hydrogen coverage. When hydrogen is chemisorbed on the surface of the carbon nanotube, the energy gap will be appeared. This is due to the degree of the sp³ hybridization, and the hydrogen coverage can control the band gap of the carbon nanotube.     

Comparative study of Cr(III) adsorption by carbon nanotubes and active carbons

The adsorption of trivalent chromium ions from aqueous solutions on the surface of carbon materials, namely, multiwall carbon nanotubes (NTs) and two samples of active carbon, is studied depending on pH and adsorbate concentration in the system. Isotherms of Cr(III) adsorption by the aforementioned materials are obtained. It is shown that chromium ions are predominantly bound by surface carboxyl groups. The adsorption of chromium ions reduces the electrokinetic potential of NTs and, at chromium concentrations C _Cr(III) > 10^–5 M, leads to the reversal of the surface charge. The adsorption value decreases in the series NT > Merck carbon > Norit carbon, in contrast to an increase in the adsorbate affinity to the adsorbent in this series, as determined from the slope of the initial section of the Langmuir isotherms. Small amounts of chromium ions sorbed at low concentrations in solution (C _Cr(III) ≤ 10^–5 M) are comparable with the concentration of hydrogen ions displaced from the surface, thus making it possible to suppose the existence of an ionexchange adsorption mechanism. As the concentration of Cr(III) increases, the equivalent displacement of H⁺ is violated, thereby indicating the development of other adsorption mechanisms (complexation).     

Theoretical study of the contribution of physisorption to the low-pressure adsorption of hydrogen on carbon nanotubes

To investigate the contribution of geometry on the adsorption process, we present a theoretical study of the low-pressure physisorption of hydrogen on isolated nanotubes and nanotube bundles through the second virial coefficient, B(AS), computed classically with an uncorrugated adsorption potential. The optimal nanotube bundle geometry at low pressure for a Lennard-Jones adsorption potential is obtained by studying the second virial coefficient, B(AS), for variable radius or bundle lattice constant. The most favorable bundle adsorption sites at low pressures and temperatures are identified for typical bundle structures and the relative contribution of interstitial sites relative to other sites is discussed as a function of temperature and pressure. The Boyle temperature behavior for the B(AS) virial coefficient is also discussed as a function of radius for isolated nanotubes. For a given nanostructure, the maximum pressure of applicability of the B(AS) approach, below which the adsorption isotherm is linear, is estimated as a criterion which depends on temperature.     

Catalyzed collapse and enhanced hydrogen storage of BN nanotubes

The novel morphology of BN nanotubes with a collapsed structure has been discovered by a metal-catalyzed treatment. The collapse causes the dramatic enlargement of a specific surface area of BN nanotubes and remarkably enhances the hydrogen storage capacity of BN nanotubes.     

Monte Carlo simulations of hydrogen adsorption in alkali-doped single-walled carbon nanotubes

Monte Carlo simulations and Widom's test particle insertion method have been used to calculate the solubility coefficients (S) and the adsorption equilibrium constants (K) in single-walled (10,10) armchair carbon nanotubes including single nanotubes, and nanotube bundles with various configurations with and without alkali dopants. The hydrogen adsorption isotherms at room temperature were predicted by following the Langmuir adsorption model using the calculated constants S and K. The simulation results were in good agreement with experimental data as well as the grand canonical Monte Carlo simulation results reported in the literature. The simulations of nanotube bundle configurations suggest that the gravimetric hydrogen adsorption increases with internanotube gap size. It may be attributed to favorable hydrogen-nanotube interactions outside the nanotubes. The effect of alkali doping on hydrogen adsorption was studied by incorporating K+ or Li+ ions into nanotube arrays using a Monte Carlo simulation. The results on hydrogen adsorption isotherms indicate hydrogen adsorption of 3.95 wt% for K-doping, and 4.21 wt% for Li-doping, in reasonable agreement with the experimental results obtained at 100 atm and room temperature.     

Fluoride and lead adsorption on carbon nanotubes

The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on.…     

Phenol adsorption on closed carbon nanotubes

We present the results of systematic studies of phenol adsorption on closed commercially available, unmodified carbon nanotubes. Phenol adsorption is determined by the value of tube-specific surface area, the presence of small amount of surface groups influence adsorption only in very small amount. Phenol can be applied as a probe molecule for comparative analysis of tube surface areas. Tube curvature influences adsorption from solution, i.e., we observe increasing adsorption energy (and slower desorption process) with the decrease in tube curvature. This is in full accordance with molecular simulation results.     

Experimental study on high-pressure adsorption of hydrogen on activated carbon

A systematic measurement of H2 adsorption on activated carbon over a wide scope of conditions was completed for the first time using a novel cryostat developed by the present authors. The equilibrium temperatures covered 77-298 K with the space of about 20 K, and the equilibrium pressures increased from 0 to about 7MPa. A set of adsorption/desorption isotherms was obtained by a standard volumetric method. This set of experimental data was fitted to all the well-known models of type-I isotherms, and Dubinin-Astakhov (D-A) equation was found to be the best-fit one On the basis of D-A model one can predict adsorption with relative error of ±4%. A 3-dimensional adsorption surface was also constructed, and the isosteric heat of adsorption was analytically determined. Except in the low pressure area, the calculated values agreed well with the experimental ones. Finally, the troubles encountered in applying D-A equation to supercritical adsorption is discussed.     

Simulation of adsorption of DNA on carbon nanotubes

We report molecular dynamics simulations of DNA adsorption on a single-walled carbon nanotube (SWNT) in an aqueous environment. We have modeled a DNA segment with 12 base pairs (Dickerson dodecamer) and a (8,8) SWNT in water, with counterions to maintain total charge neutrality. Simulations show that DNA binds to the external surface of an uncharged or positively charged SWNT on a time scale of a few hundred picoseconds. The hydrophobic end groups of DNA are attracted to the hydrophobic SWNT surface of uncharged SWNTs, while the hydrophilic backbone of DNA does not bind to the uncharged SWNT. The binding mode of DNA to charged SWNTs is qualitatively different from uncharged SWNTs. The phosphodiester groups of the DNA backbone are attracted to a positively charged SWNT surface while DNA does not adsorb on negatively charged SWNTs. There is no evidence for canonical double-stranded DNA wrapping around either charged or uncharged SWNTs on the very short time scales of the simulations. The adsorption process appears to have negligible effect on the internal stacking structure of the DNA molecule but significantly affects the A to B form conversion of A-DNA. The adsorption of A-DNA onto an uncharged SWNT inhibits the complete relaxation of A-DNA to B-DNA within the time scale of the simulations. In contrast, binding of the A-DNA onto a positively charged SWNT may promote slightly the A to B conversion.     

Joint adsorption of benzene and water on carbon nanotubes

The joint adsorption of water and benzene on nanosized carbon tubes (NCTs) (with a specific surface area of 413 m²/g) synthesized by carbonizing methylene chloride in cylindrical pores of an Al₂O₃ matrix was studied. ¹H NMR spectroscopy with layer-by-layer freezing of the liquid phase was used to characterize the water bound in pores at various contents of benzene and water. Due to its higher energy of interaction with carbon surfaces, benzene was demonstrated to decrease the energy of interaction of water with the surface of the NCT sample from 43 to 15 J/g. It was suggested that, in the presence of benzene, H-bonded water clusters only weakly bound to the surface are formed in the cylindrical cavities of the NCTs.     

The adsorption of biogenic amines on carbon nanotubes

The adsorption of phenylethylamine, tryptamine, and tyramine on carbon nanotubes from aqueous solutions (pH 7.4) was studied depending on time and sorbate concentration. The suggestion was made that their interaction with electrodes was determined by electrostatic attraction between protonated amino groups and oxygen-containing functional groups of the surface of carbon. An increase in the adsorption of biological amines was caused by the interaction of the π systems of their aromatic rings with carbon surface hexagons. The adsorption of biogenic amines on carbon nanotubes was necessary for their possible electrooxidation and analytic determination by electrochemical methods with the use of carbon electrodes. Original Russian Text ? I.G. Sidorenko, O.V. Markitan, N.N. Vlasova, G.M. Zagorovskii, V.V. Lobanov, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 6, pp. 1139–1142.     

A theoretical study of the dissociative chemisorption of hydrogen on carbon nanotubes

Potential profiles were obtained for the chemisorption of hydrogen on (n, n) and (n, 0) carbon nanotubes. The energy barriers and rate constants for hydrogen molecule sorption on and desorption from various nanotubes were determined. The constants for sorption and desorption were used to calculate sorption-desorption equilibrium constants. Sorption on outside nanotube surfaces was found to be more favorable energetically than sorption on inside surfaces.     

Molecular dynamics simulations on the effects of diameter and chirality on hydrogen adsorption in single walled carbon nanotubes

We present systematic molecular dynamics simulation studies of hydrogen storage in single walled carbon nanotubes of various diameters and chiralities using a recently developed curvature-dependent force field. Our main objective is to address the following fundamental issues: 1. For a given H2 loading and nanotube type, what is the H2 distribution in the nanotube bundle? 2. For a given nanotube type, what is the maximal loading (H2 coverage)? 3. What is the diameter range and chirality for which H2 adsorption is most energetically favorable? Our simulation results suggest strong dependence of H2 adsorption energies on the nanotube diameter but less dependence on the chirality. Substantial lattice expansion upon H2 adsorption was found. The average adsorption energy increases with the lowering of nanotube diameter (higher curvature) and decreases with higher H2 loading. The calculated H2 vibrational power spectra and radial distribution functions indicate a strong attractive interaction between H2 and nanotube walls. The calculated diffusion coefficients are much higher than what has been reported for H2 in microporous materials such as zeolites, indicating that diffusivity does not present a problem for hydrogen storage in carbon nanotubes.     

First-principles study of field emission properties of gas adsorption on the carbon nanotubes

Carbon-containing gases usually present when preparing carbon nanotubes, and can affect the field emission of carbon nanotubes. Water vapor is also an important kind of gas for field emission, concerned by both experimental and theoretical studies. Under strong electric field, the gas molecules may be decomposed to radicals. Using DMol3 code based on density-functional theory, we calculated the adsorption of the gas molecules CH₄, CO and H₂O and the CH₃ and OH radicals under emission conditions. We found that the H₂O and the methyl have advantages to field emission and the CH₄, CO and the hydroxyl have disadvantages. The results of H₂O and CO are consistent with experiments, and the enhancement of current by CH₄ in the experiment may be due to the methyl decomposed from the CH₄.     

A density functional theory study on acetylene-functionalized BN nanotubes

Covalent functionalization of a zigzag boron nitride nanotube (BNNT) with acetylene has been investigated by density functional theory in terms of energetic, geometric, and electronic properties. It has been found that the most stable functionalized BNNT is the one in which the acetylene is diffused into the tube wall so that two heptagonal and two pentagonal rings are formed, releasing energy of 1.54 eV. In addition, the effect of substituting the hydrogen atoms of C₂H₂ by different functional groups including –F, –CH₂F, –CN, and –OCH₃ on the geometric and electronic properties of the BNNT has been investigated. The reaction energies are found to be in the range of ?1.03 to ?3.13 eV so that their relative magnitude order is as follows: C₂F₂ > (OCH₃)₂C₂ > C₂H₂ > (CH₂F)₂C₂ > (CN)₂C₂, suggesting that the functionalization energy is increased by increasing the electron donating character of the functional groups. Overall, chemical modification of BNNT by the studied groups results in little changes in electronic properties of the tube and may be an effective way for the purification of BNNTs.     

Hydrogen adsorption in defected carbon nanotubes

Recently there has been lot of interest in the development of hydrogen storage in various systems for the large-scale application of fuel cells, mobiles and for automotive uses. Hectic materials research is going on throughout the world with various adsorption mechanisms to increase the storage capacity. It was observed that physisorption proves to be an effective way for this purpose. Some of the materials in this race include graphite, zeolite, carbon fibers and nanotubes. Among all these, the versatile material carbon nanotube (CNT) has a number of favorable points like porous nature, high surface area, hollowness, high stability and light weight, which facilitate the hydrogen adsorption in both outer and inner portions. In this work we have considered armchair (5,5), zig zag (10,0) and chiral tubes (8,2) and (6,4) with and without structural defects to study the physisorption of hydrogen on the surface of carbon nanotubes using DFT calculations. For two different H₂ configurations, adsorption binding energies are estimated both for defect free and defected carbon nanotubes. We could observe larger adsorption energies for the configuration in which the hydrogen molecular axis perpendicular to the hexagonal carbon ring than for parallel to C–C bond configuration corresponding to the defect free nanotubes. For defected tubes the adsorption energies are calculated for various configurations such as molecular axis perpendicular to a defect site octagon and parallel to C–C bond of octagon and another case where the axis perpendicular to hexagon in defected tube. The adsorption binding energy values are compared with defect free case. The results are discussed in detail for hydrogen storage applications.     

Adsorption of atomic hydrogen on single-walled carbon nanotubes

We have investigated atomic and electronic structures of hydrogen-chemisorbed single-walled carbon nanotubes (SWCNTs) by density functional calculations. We have searched for relative stability of various hydrogen adsorption geometries with coverage. The hydrogenated SWCNTs are stable with coverage of H/C, theta >/= 0.3. The circular cross sections of nanotubes are transformed to polygonal shapes with different symmetries upon hydrogen adsorption. We find that the band gap in carbon nanotubes can be engineered by varying hydrogen coverage, independent of the metallicity of carbon nanotubes. This is explained by the degree of sp(3) hybridization.     

碳纳米管吸附水溶液中双酚A的热力学

以甲醇和去离子水组成的体系（体积比90∶10）为流动相,建立了以香烟过滤嘴作吸附剂,固相萃取（SPE）与高效液相色谱（HPLC）联用测定水中双酚A(Bisphenol A,BPA)的新方法。研究了水溶液中碳纳米管(CNTs)吸附双酚A的热力学特性,测定了不同温度下的吸附等温线,并探讨了其可能的吸附机理。结果表明,CNTs对BPA 的吸附主要以快速吸附为主,常温下,碳纳米管对于70 mg·L-1的双酚A水溶液的吸附量可达到 24.65 mg g-1,吸附量随初始浓度的增加而增加,随温度的降低而增大,采用Freundlich和Langmuir方程拟合,相关系数均大于0.99,热力学函数ΔG、ΔH及ΔS分别为-39.48 ~ -43.51 KJ·mol-1、-18.06 KJ·mol-1、71.73 J·mol-1·K-1,吸附为放热、熵增的自发过程,降低温度有利于吸附,并且具有物理吸附特征。     

First-principles study of interaction between H2 molecules and BN nanotubes with BN divacancies

The interaction between H(2) molecules and boron nitride (BN) single-walled nanotubes with BN divacancies is investigated with density-functional theory. Our calculations reveal that H(2) molecules adsorb physically outside defective BN nanotubes, and cannot enter into BN nanotubes through bare BN divacancies because the energy barrier is as high as 4.62 eV. After the defects are saturated by hydrogen atoms, the physisorption behavior of H(2) molecules is not changed, but the energy barrier of H(2) molecules entering into BN nanotubes through the defects is reduced to 0.58 eV. This phenomenon is ascribed to hydrogen saturation induced reduction of electrostatic potential around the defects.