CONTROL OF DIMENSIONAL STABILITY AND DEGRADATION RATE IN ELECTROSPUN COMPOSITE SCAFFOLDS COMPOSED OF POLY(D,L-LACTIDE-CO-GLYCOLIDE)AND POLY(Ε-CAPROLACTONE)

The purpose of this study is to investigate the effect of composition poly(D,L-lactide-co-glycolide)/poly(ε-caprolactone)(PLGA/PCL)blending on the morphology,shrinkage and degradation behaviors of the electrospun fibers.With the increase of PLGA content in the composite fibers,the average diameter of the electrospun fibers increased from 1.35 μm to 1.95μm.The serious shrinking of the electrospun PLGA meshes could be circumvented by adding 20% PCL in the fibers,resulting from the semi-crystalline nature of PCL.The degradation rate of the electrospun meshes could be modulated by PLGA/PCL composition.In addition,the electrospun meshes containing 20% PCL displayed stable dimensional morphology with degradation.     

Zein supports scaffolding capacity toward mammalian cells and bactericidal and antiadhesive properties on poly(ε-caprolactone)/zein electrospun fibers

Studies investigate the electrospinnability of poly(ε-caprolactone)/protein blends to produce fibers for tissue engineering applications. However, no reports show that zein can improve the scaffolding capacity toward stem cells and promote antiadhesive and bactericidal properties to the poly(ε-caprolactone)/zein fibers. We create fibers with average diameters ranging from 200 to 400 nm from the electrospinning of poly(ε-caprolactone)/protein mixtures. Poly(ε-caprolactone)/zein blends are electrospinnable at zein concentration between 20 and 40 wt% in a 70/30 formic acid/acetic acid mixture. Water contact angle measurements indicate that zein increases fiber hydrophilicity. The water contact angle decreases from 118° (pure poly(ε-caprolactone) fiber) to 73° for the scaffold containing 40 wt% zein. The zein (40 wt%) significantly increases Young's modulus from 260 MPa (pure poly(ε-caprolactone) fibers) to 980 MPa (poly(ε-caprolactone)/zein fibers) with no substantial influence on elongation at break (ε ≥ 125%) and tensile strength (≥0.040 MPa). The electrospun scaffolds containing zein also promote cell adhesion, proliferation, and spreading of adipose-derived human mesenchymal stem cells for at least 7 days of culture. The zein on poly(ε-caprolactone)/zein fibers can prevent the attachment and proliferation of Escherichia coli and Staphylococcus aureus. We propose these materials for wound healing and skin repair.     

Multilayered electrospun nanofibrous scaffolds for tailored controlled release of embelin

Polymeric electrospun meshes are highly attractive as versatile platforms for numerous biomedical applications, tissue engineering, biosensors, and controlled release of bioactive agents. Herein, we describe the preparation and characterization of multilayered nanofibrous poly(ε-caprolactone) scaffolds with different embelin content by electrospinning technique. In vitro release in physiological and acidic pH and kinetic analysis were performed. The results show that it is possible to modulate the release profile depending on the number and thickness of layers added to drug-loaded scaffold that acts as an embelin reservoir. Electrospun multilayered scaffolds present characteristics, morphology and release profiles that could be very attractive for use as embelin controlled release systems.     

Preparation,Characterization and Drug Release Behavior of 5-Fluorouracil Loaded Carboxylic Poly(ε-caprolactone) Nanoparticles

In this paper, 5-Fluorouracil (5-FU) loaded carboxylic poly(ε-caprolactone) nanoparticles have been prepared by emulsification/solvent evaporation o/w method, and the drug release behaviors of 5-FU were investigated. The novel carboxylic poly (ε-caprolactone) (P(CL-OPD)-mal) was synthesized via conjugation of maleic anhydride to sodium borohydride (NaBH₄) reduced poly(ε-caprolactone-co -4- carbonyl -ε-caprolactone) (P(CL-OPD)), while P(CL-OPD) was synthesized in bulk by ring-opening polymerization of ε-caprolactone and 4-carbonyl-ε-caprolactone (OPD) with stannous octoate as a catalyst. Their structures were confirmed by ¹HNMR, FT-IR and GPC. Dynamic light scattering (DLS), transmission electron microscopy (TEM), zeta potential measurements were used for nanoparticle characterization. TEM and DLS showed the nanoparticles were with spherical shape and uniform size distribution (mean diameter 70～100 nm), respectively. Zeta potential analysis revealed that the nanoparticles had an increased negative surface with the increase of carboxyl group concentration. UV spectroscopy was adopted to study the entrapment and release behaviour. The maximum 5-FU loading efficiency was 14.39% with the entrapment efficiency be 42%. In vitro release studies were performed in PBS at 37°C. Results of the study showed that the release behavior can be well-controlled, and the balanced release was up to 96 h. P(CL-OPD)-mal nanoparticles would provide increased benefit in biomedical and pharmaceutical applications.     

CONTROL OF DIMENSIONAL STABILITY AND DEGRADATION RATE IN ELECTROSPUN COMPOSITE SCAFFOLDS COMPOSED OF POLY(D,L-LACTIDE-co-GLYCOLIDE) AND POLY(ε-CAPROLACTONE)

The purpose of this study is to investigate the effect of composition poly(D,L-lactide-co-glycolide)/poly(ε- caprolactone)(PLGA/PCL)blending on the morphology,shrinkage and degradation behaviors of the electrospun fibers. With the increase of PLGA content in the composite fibers,the average diameter of the electrospun fibers increased from 1.35μm to 1.95μm.The serious shrinking of the electrospun PLGA meshes could be circumvented by adding 20% PCL in the fibers,resulting from the semi-crystalline nature ...     

Thoroughly Hydrophilized Electrospun Poly(L-Lactide)/ Poly(ε-Caprolactone) Sponges for Tissue Engineering Application

Biodegradable electrospun sponges are of interest for various applications including tissue engineering, drug release, dental therapy, plant protection, and plant fertilization. Biodegradable electrospun poly(l -lactide)/poly(ε-caprolactone) (PLLA/PCL) blend fiber-based sponge with hierarchical pore structure is inherently hydrophobic, which is disadvantageous for application in tissue engineering, fertilization, and drug delivery. Contact angles and model studies for staining with a hydrophilic dye for untreated, plasma-treated, and surfactant-treated PLLA/PCL sponges are reported. Thorough hydrophilization of PLLA/PCL sponges is found only with surfactant-treated sponges. The MTT assay on the leachates from the sponges does not indicate any cell incompatibility. Furthermore, the cell proliferation and penetration of the hydrophilized sponges are verified by in vitro cell culture studies using MG63 and human fibroblast cells.     

低结晶度聚ε-己内酯电纺膜的制备及其药物控释行为

以芳氧基稀土三(2,6-二叔丁基-4-甲基苯氧基)镧(La(OAr)3)为催化剂,通过加入少量(8.5 mol%)碳酸2,2-二甲基三亚甲基酯(DTC)与ε-己内酯(CL)进行无规共聚合,成功制备了低结晶度的脂肪族内酯-碳酸酯无规共聚酯(PCD)材料,并用1H-NMR、SEC、DSC和WAXS证明了产物的结构和性能.以...     

Superhydrophobicity of PHBV fibrous surface with bead-on-string structure

A poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) fibrous surface with various bead-on-string structures was fabricated by electrospinning. PHBV was electrospun at various concentrations and then CF4 plasma treatment was employed to further improve the hydrophobicity of the PHBV fiber surfaces. The surface morphology of the electrospun PHBV mats was observed by scanning electron microscopy (SEM). The surface properties were characterized by water contact angle (WCA) measurements and X-ray photoelectron spectroscopy (XPS). The surface morphology of the electrospun PHBV fibrous mats with the bead-son-string structure varied with the solution concentration. The WCA of all of the electrospun PHBV mats was higher than that of the PHBV film. In particular, a very rough fiber surface including porous beads was observed when PHBV was electrospun from the solution with a concentration of 26 wt%. Also, its WCA further increased from 141 degrees to 158 degrees after CF(4) plasma treatment for 150 s. PHBV can be rendered superhydrophobic by controlling the surface morphology and surface energy, which can be achieved by adjusting the electrospinning and plasma treatment conditions.     

RELEASE OF IBUPROFEN FROM PEG-PLLA ELECTROSPUN FIBERS CONTAINING POLY(ETHYLENE GLYCOL)-b-POLY(α-HYDROXY OCTANOIC ACID) AS AN ADDITIVE

<正>Poly(α-hydroxy octanoic acid) was first used as an additive for the preparation of electrospun ultra-fine fibers of poly(ethylene glycol)-b-poly(L-lactide)(PEG-PLLA).Ibuprofen was loaded in the electrospun ultra-fine fibers.The results from environmental scanning electron microscopy(ESEM),wide angle X-ray diffraction(WAXD) and differential scanning calorimetry(DSC) demonstrated that ibuprofen could be perfectly entrapped in the fibers electrospun from PEG-PLLA usingα-hydroxy octanoic acid or PEG-b-poly(α-hydroxy octanoic acid)(PEG-PHOA) as additives.Compared with electrospun PEG-PLLA fibers which entrapped 20 wt%ibuprofen,the PEG-PLLA electrospun fibers containing PEG-PHOA exhibited integral and robust after 1 week incubated in 37℃,pH 7.4 phosphate buffer solution with 10μg/mL proteinase K.Compared with electrospun fibers without PEG-PHOA,the concentration of proteinase K in release media had less effect on the release rate of ibuprofen.An unique release profile was found from PEG-PLLA fiber after the incorporation of PEG-PHOA. Enzyme degradation experiments demonstrated that PEG-PHOA but notα-hydroxy octanoic acid monomer was the crucial factor for integrity maintenance of the electrospun fibers,which may be due to the enzyme degradation tolerance property of the PEG-PHOA polymer additive.     

Vesicle-formation of hexadecyl phosphatidyl choline released from ε-caprolactone electrospun fibrous mats: preparation and characterization

After it was proved by transmission electron microscope and light microscope that hexadecyl phosphatidyl choline (HePC) itself and HePC/cholesterol (Chol) complexes could form micro- or nanoscale vesicles, it was also found that vesicles composed by HePC itself or HePC/Chol could be formed by releasing from the fibers after electrospun poly ε-caprolactone (PCL) fibers with hexadecyl phosphatidyl choline (HePC) and Chol entrapped was obtained. Characterization by field emission scanning electron microscope, wide-angle X-ray diffraction, and differential thermal analysis indicated that HePC and HePC/Chol was perfectly entrapped in fibers. Beside these, it is was also found that HePC and Chol presented synchronous sustained release pattern from PCL by high-performance liquid chromatography. This experiment provided a further vision of composite materials composed of macromolecule and small molecule, for application in gene delivery, controlled drug delivery and bio-scaffold.     

Diselenide-containing poly(ε-caprolactone)-based thermo-responsive hydrogels with oxidation and reduction-triggered degradation

Herein, novel multi-responsive injectable polyester hydrogels were reported based on the diselenide-containing poly(ε-caprolactone) copolymers ((mPEG-PCL-Se)₂). The (mPEG-PCL-Se)₂ solution remained a free-flowing state at ambient temperature but spontaneously turned into a semisolid hydrogel upon heating to physiologic temperature. The phase transition temperature was examined to be dependent on the composition and aqueous concentration of the copolymers. More importantly, the thermo-responsive hydrogels were endowed with oxidation and reduction-triggered degradation by the incorporation of diselenide groups. Accordingly, the degradation of poly(ε-caprolactone)-based hydrogels was greatly improved and the rate of degradation was well regulated by the concentration of hydrogen peroxide (H₂O₂) or glutathione (GSH). This superior stimuli-responsive degradation could lead to an enhanced drug release of encapsulated drug (Doxorubicin, DOX). Thus the oxidation and reduction-triggered degradable diselenide-containing poly(ε-caprolactone) hydrogels would offer great potential for the controlled drug delivery.     

Preparation of Poly(ε-caprolactone)/Poly(ester amide) Electrospun Membranes for Vascular Repair

With adjustable amphiphilicity and anionic/cationic charge, biodegradability and biocompatibility, amino acid-based poly(ester amide)s(PEAs) have drawn attention in the research of tissue engineered vascular grafts. In this work, L-phenylalanine-based PEAs with or without L-lysine were synthesized through polycondensation, and ultrafine fibrous grafts consisted of PEAs and poly(ε-caprolactone)(PCL) in given mass ratios were further prepared via blend electrospinning. Surface characterizations by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the chemical structure, and the wettability indicated that the prepared PCL/PEAs electrospun membranes exhibited less hydrophobic than PCL. Tensile results showed that the PCL/PEAs membranes possessed suitable mechanical properties, which could meet the requirements of artificial blood vessels. Cell culture and hemolytic tests exhibited that the PCL/PEAs electrospun membranes are biocompatible. In general, the electrospun grafts of PCL/PEAs could be applied for vascular repair.     

Highly porous fibers by electrospinning into a cryogenic liquid

Highly porous fibers of various polymers were created by electrospinning with a modified collector. A bath of liquid nitrogen was used to freeze the fibers, inducing a phase separation between the polymer and the solvent. When the solvent was removed in vacuo, highly porous fibers were obtained. Poly(styrene), poly(acrylonitrile), poly(vinylidene fluoride), and poly(epsilon-caprolactone) were all electrospun into porous fibers using this simple method. These porous fibers have a range of potential applications in encapsulation, controlled release, superhydrophobic coating, and lightweight reinforcement.     

Transparent superhydrophobic films based on silica nanoparticles

We demonstrate a layer-by-layer processing scheme that can be utilized to create transparent superhydrophobic films from SiO2 nanoparticles of various sizes. By controlling the placement and level of aggregation of differently sized nanoparticles within the resultant multilayer thin film, it is possible to optimize the level of surface roughness to achieve superhydrophobic behavior with limited light scattering. Transparent superhydrophobic films were created by the sequential adsorption of silica nanoparticles and poly(allylamine hydrochloride). The final assembly was rendered superhydrophobic with silane treatment. Optical transmission levels above 90% throughout most of the visible region of the spectrum were realized in optimized coatings. Advancing water droplet contact angles as high as 160 degrees with low contact angle hysteresis (<10 degrees ) were obtained for the optimized multilayer thin films. Because of the low refractive index of the resultant porous multilayer films, they also exhibited antireflection properties.     

Controlled-release and antibacterial studies of doxycycline-loaded poly(ε-caprolactone) microspheres

The objective of the present study is to achieve doxycycline’s maximum therapeutic efficacy. Doxycycline-loaded poly(ε-caprolactone) microspheres were prepared by water-in-oil-in-water (w/o/w) double emulsion solvent evaporation technique with different formulation variables such as concentrations of drug and polymer. The effects of these variables on surface morphology, particle size distribution, encapsulation efficiency, and in vitro release behavior were examined. To observe the nature of microspheres, X-ray diffraction studies were carried out. The release data obtained were determined using various kinetic models and Korsmeyer–Peppas model showed an acceptable regression value for all compositions. Antibacterial efficiency of doxycycline-loaded poly(ε-caprolactone) microspheres were assessed by determining Minimum Inhibition Concentration (MIC) by standard tube dilution method against four standard pathogenic strains. The in vitro drug release studies were carried out in phosphate buffer solution (pH 7.2). The results showed marked retardation of doxycycline release and higher percentage of polymer gave longer drug release profile. This may definitely provide a useful controlled-release drug therapy and also prove to be effective over a long period of time (76 h).     

Biodegradable poly(dl-lactide)/poly(ε-caprolactone) mixtures: Miscibility at the air/water interface

Mixtures of biodegradable polymers, poly(dl-lactide) and poly(ε-caprolactone) monolayers at the air/water interface have been studied. Surface pressure-area isotherms of poly(dl-lactide), poly(ε-caprolactone) and their mixtures were obtained by monolayer compression at constant temperature. The behavior of the mixed monolayers was analyzed according to the classical addition rule. Good agreement was observed between experimental and ideal behavior except for one composition where a negative deviation was observed. The polymer monolayer miscibility was corroborated by comparison between the surface pressure-area isotherms of the random copolymers (dl-lactide-co-ε-caprolactone) and their mixtures at the same compositions. Brewster angle microscopy (BAM) shows homogeneity in the monolayers in the whole range of compositions. These results also confirm the miscibility of the mixtures.     

PDMS migration at poly(vinyl chloride)/poly(ɛ-caprolactone)/poly(ɛ-caprolactone)-b-poly(dimethylsiloxane) blends surfaces

Films composed of poly(vinyl chloride)/poly(?-caprolactone)/poly(?-caprolactone)-b-poly(dimethylsiloxane) [PVC/PCL/(PCL-b-PDMS)] blends were prepared by solvent casting from tetrahydrofuran. The PVC content was kept constant (60 wt %) while varying the PCL and PCL-b-PDMS contents, part of the PCL (0–20 wt %) in the PVC/PCL (60/40) blend being replaced with PCL-b-PDMS with different molecular weights of the PCL blocks. The prepared blends were investigated by infrared spectroscopy and contact angle measurements. FTIR analysis and contact angle measurements indicate that the PDMS blocks tend to migrate towards the surface and this migration is preferential to the side in contact with air.     

Lipase-sensitive polymeric triple-layered nanogel for "on-demand" drug delivery

We report a new strategy for differential delivery of antimicrobials to bacterial infection sites with a lipase-sensitive polymeric triple-layered nanogel (TLN) as the drug carrier. The TLN was synthesized by a convenient arm-first procedure using an amphiphilic diblock copolymer, namely, monomethoxy poly(ethylene glycol)-b-poly(ε-caprolactone), to initiate the ring-opening polymerization of the difunctional monomer 3-oxapentane-1,5-diyl bis(ethylene phosphate). The hydrophobic poly(ε-caprolactone) (PCL) segments collapsed and surrounded the polyphosphoester core, forming a hydrophobic and compact molecular fence in aqueous solution which prevented antibiotic release from the polyphosphoester core prior to reaching bacterial infection sites. However, once the TLN sensed the lipase-secreting bacteria, the PCL fence of the TLN degraded to release the antibiotic. Using Staphylococcus aureus (S. aureus) as the model bacterium and vancomycin as the model antimicrobial, we demonstrated that the TLN released almost all the encapsulated vancomycin within 24 h only in the presence of S. aureus, significantly inhibiting S. aureus growth. The TLN further delivered the drug into bacteria-infected cells and efficiently released the drug to kill intracellular bacteria. This technique can be generalized to selectively deliver a variety of antibiotics for the treatment of various infections caused by lipase-secreting bacteria and thus provides a new, safe, effective, and universal approach for the treatment of extracellular and intracellular bacterial infections.     

Adsorption of asphaltenes from heavy oil onto in situ prepared NiO nanoparticles

In this study, a series of membranes with different amino group densities were prepared to investigate the surface properties of the novel poly(γ-amino-ε-caprolactone-co-ε-caprolactone) (NPCL) copolymer synthesized by our laboratory. Meanwhile, the human mesenchymal stem cells' (hMSCs) behavior on those membranes was examined. The molecular characteristics of the NPCL copolymers were characterized by nuclear magnetic resonance (NMR), size exclusion chromatography (SEC), and differential scanning calorimetry (DSC). Surface properties of membranes were characterized by water contact angle analysis, X-ray photoelectron spectroscopy analysis (XPS), and atomic force microscopy (AFM). It was found that the incorporation of amino groups to the poly(ε-caprolactone) (PCL) backbone resulted in an augmented wettability, a decreased crystallinity, and also an increased surface roughness on the NPCL membranes. In vitro cell experiments showed a significant enhancement in hMSCs' adhesion, proliferation, and osteogenic differentiation on NPCL membranes compared with virgin PCL membrane, and demonstrated that surface properties of membrane played an important role in tailoring cell behavior.     

Fabrication of biofunctional complex micelles with tunable structure for application in controlled drug release

In acidic solution, complex micelles were formed by diblock copolymers of poly (ethylene glycol)-b-poly (ε-caprolactone) (PEG-b-PCL) and folate-poly (2-(dimethylamino) ethyl methylacrylate)-b-poly (ε-caprolactone) (Fol-PDMAEMA-b-PCL) with a PCL core, a mixed PEG/Fol-PDMAEMA shell. The surface charge of the complex micelles was positive at acidic surroundings for the protonated PDMAEMA. With increasing pH value to 7.4 (above pK _a of PDMAEMA), these micelles could convert into a core-shell-corona (CSC) structure composing a hydrophobic PCL core, a collapsed PDMAEMA shell, and a soluble PEG corona. Compared to core-shell micelles formed by PEG-b-PCL, micelles with CSC structure can prolong degradation by enzyme. Doxorubicin was physically loaded into the PCL core. The drug release rate was pH-dependent. At pH 5.5, complex micelles with core-shell structure showed faster drug release rate, while at pH 7.4, complex micelles gained CSC structure which control the drug release at a lower rate. The multifunctional complex micelles were prepared for enhanced tumor therapy.