Mononuclear (Pd, Pt), heterodinuclear (PdAg, PtAg), and tetranuclear (Pd2Ag2, Pt2Ag2) 1,1-ethylenedithiolato complexes

lp;&-5q;1 The reactions of [Tl2[S2C=C[C(O)Me]2]]n with [MCl2L2] (1:1) or with [MCl2(NCPh)2] and PPh3 (1:1:2) give complexes [M[eta2-S2C=C[C(O)Me]2]L2] [M = Pt, L2 = 1,5-cyclooctadiene (cod) (1); L2 = bpy, M = Pd (2a), Pt (2b), L = PPh3, M = Pd (3a), Pt (3b)] whereas with MCl2 and QCl (2:1:2) anionic derivatives Q2[M[eta2-S2C=C[C(O)Me]2]2] [M = Pd, Q = NMe4 (4a), Ph3P=N=PPh3 (PPN) (4a'), M = Pt, Q = NMe4 (4b)] are produced. Complexes 1 and 3 react with AgClO4 (1:1) to give tetranuclear complexes [[ML2]2Ag2[mu2,eta2-(S,S')-[S2C=C[C(O)Me]2]2]](ClO4)2 [L = PPh3, M = Pd (5a), Pt (5b), L2 = cod, M = Pt (5b')], while the reactions of 3 with AgClO4 and PPh3 (1:1:2) give dinuclear [[M(PPh3)2][Ag(PPh3)2][mu2,eta2-(S,S')-S2C=C[C(O)Me]2]]]ClO4 [M = Pd (6a), Pt (6b)]. The crystal structures of 3a, 3b, 4a, and two crystal forms of 5b have been determined. The two crystal forms of 5b display two [Pt(PPh3)2][mu2,eta2-(S,S')-[S2C=C[C(O)Me]2]2] moieties bridging two Ag(I) centers.     

Unusual monodentate binding mode of 2,2'-dipyridylamine (L) in isomeric trans-(acac)2RuII(L)2, trans-[(acac)2RuIII(L)2]ClO4, and cis-(acac)2RuII(L)2 (acac = acetylacetonate). synthesis, structures, and spectroscopic, electrochemical, and magnetic aspects

The reaction of cis-Ru(acac)2(CH3CN)2 (acac = acetylacetonate) with 2,2'-dipyridylamine (L) in ethanolic medium resulted in facile one-pot synthesis of stable [(acac)2RuIII(L)]ClO4 ([1]ClO4), trans-[(acac)2RuII(L)2] (2), trans-[(acac)2RuIII)L)2]ClO4 ([2]ClO4), and cis-[(acac)2RuII(L)2] (3). The bivalent congener 1 was generated via electrochemical reduction of [1]ClO4. Although in [1]+ the dipyridylamine ligand (L) is bonded to the metal ion in usual bidentate fashion, in 2/[2]+ and 3, the unusual monodentate binding mode of L has been preferentially stabilized. Moreover, in 2/[2]+ and 3, two such monodentate L's have been oriented in the trans- and cis-configurations, respectively. The binding mode of L and the isomeric geometries of the complexes were established by their single-crystal X-ray structures. The redox stability of the Ru(II) state follows the order 1 < 2 < 3. In contrast to the magnetic moment obtained for [1]ClO4, mu = 1.84 muB at 298 K, typical for low-spin Ru(III) species, the compound [2]ClO4 exhibited an anomalous magnetic moment of 2.71 muB at 300 K in the solid state. The variable-temperature magnetic measurements showed a pronounced decrease of the magnetic moment with the temperature, and that dropped to 1.59 muB at 3 K. The experimental data can be fitted satisfactorily using eq 2 that considered nonquenched spin-orbit coupling and Weiss constant in addition to the temperature-independent paramagnetism. [1]ClO4 and [2]ClO4 displayed rhombic and axial EPR spectra, respectively, in both the solid and the solution states at 77 K.     

A family of oxo-chalcogenide molybdenum and tungsten complexes, (n-Bu4N)2[M2O2(mu-Q)2(1,3-dithiole-2-thione-4,5-dithiolate)2] (M = Mo, W; Q = S, Se): new synthetic entries, structure, and gas-phase behavior

A new series of complexes with the general formula (n-Bu4N)2[M2O2(micro-Q)2(dmit)2] (where M = Mo, W; Q = S, Se; dmit = 1,3-dithiole-2-thione-4,5-dithiolate) have been prepared. Fragmentation of the trinuclear cluster (n-Bu4N)2[Mo3(micro3-S)(micro-S2)3(dmit)3] in the presence of triphenylphosphine (PPh3) gives the dinuclear compound (n-Bu4N)2[Mo2O2(micro-S)2(dmit)2] [(n-Bu4N)2[2]], which is formed via oxidation in air from the intermediate (n-Bu4N)2[Mo3(micro3-S)(micro-S)3(dmit)3] [(n-Bu4N)2[1]] complex. Ligand substitution of the molybdenum sulfur bridged [Mo2O2(micro-S)2(dimethylformamide)6]2+ dimer with the sodium salt of the dmit dithiolate also affords the dianionic compound (n-Bu4N)2[2]. The whole series, (n-Bu4N)2[Mo2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[3]], (n-Bu4N)2[W2O2(micro-S)2(dmit)2] [(n-Bu4N)2[4]], (n-Bu4N)2[W2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[5]], and (n-Bu4N)2[Mo2O2(micro-S)2(dmid)2] [(n-Bu4N)2[6]; dmid = 1,3-dithiole-2-one-4,5-dithiolate], has been synthesized by the excision of the polymeric (Mo3Q7Br4)x phases with PPh3 or 1,2-bis(diphenylphosphanyl)ethane in acetonitrile followed by the dithiolene incorporation and further degradation in air. Direct evidence of the presence of the intermediates with the formula [M3Q4(dmit)3]2- (M = Mo, W; Q = S, Se) has been obtained by electrospray ionization mass spectrometry. The crystal structures of (n-Bu4N)2[1], (PPh4)2[Mo2O2(micro-S)2(dmit)2] [(PPh4)2[2]; PPh4 = tetraphenylphosphonium], (n-Bu4N)2[2], (n-Bu4N)2[4], (PPh4)2[W2O2(micro-Se)2(dmit)2] [(PPh4)2[5]], and (n-Bu4N)2[6] have been determined. A detailed study of the gas-phase behavior for compounds (n-Bu4N)2[2-6] shows an identical fragmentation pathway for the whole family that consists of a partial breaking of the two dithiolene ligands followed by the dissociation of the dinuclear cluster.     

Mixed-metal sandwich complexes [M(II)2(H2O)2Fe(III)2(P2W15O56)2]14- (M(II) = Co, Mn): synthesis and stability. The molecular structure of [M(II)2(H2O)2Fe(III)2(P2W15O56)2]14-

Two new mixed-metal sandwich complexes [M(II)2(H2O)2Fe(III)2(P2W15O56)2]14- (abbreviated [M2Fe2P4W30], M(II) = Co(II), Mn(II)) were obtained at pH 3 by addition of M2+ to [Na2(H2O)2Fe(III)2(P2W15O56)2]16- (abbreviated [Na2Fe2P4W30]) without substitution in the alpha-[P2W15O56]12- (abbreviated [P2W15]) units. Their X-ray structures are reported. At lower pH, back conversion to [Na2Fe2P4W30] was followed by 31P NMR, electrochemistry and UV-visible spectroscopy. The preparation and the characterization in solution of the lacunary intermediate [NaCo(II)(H2O)2Fe(III)2(P2W15O56)2]15- (abbreviated [NaCoFe2P4W30]) is also described.     

Syntheses, structural determinations of [Ru(ROCS2)2(PPh3)2](+/0) pairs, and kinetic analyses of thermal reactions involving transient trans-[Ru(iPrOCS2)2(PPh3)2] species (ROCS2(-) = ethyl- or isopropyldithiocarbonate and PPh3 = triphenylphosphine)

Controlled-potential electrochemical oxidation of cis-[Ru(ROCS2)2(PPh3)2] (R = Et, iPr) yielded corresponding Ru(III) complexes, and the crystal structures of cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2](PF6) were determined. Both pairs of complexes exhibited almost identical coordination structures. The Ru-P distances in trans-[Ru(III)(ROCS2)2(PPh3)2](PF6) [2.436(3)-2.443(3) A] were significantly longer than those in cis-[Ru(II)(ROCS2)2(PPh3)2] [2.306(1)-2.315(2) A]: the smaller ionic radius of Ru(III) than that of Ru(II) stabilizes the trans conformation for the Ru(III) complex due to the steric requirement of bulky phosphine ligands while mutual trans influence by the phosphine ligands induces significant elongation of the Ru(III)-P bonds. Cyclic voltammograms of the cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2]+ complexes in dichloromethane solution exhibited typical dual redox signals corresponding to the cis-[Ru(ROCS2)2(PPh3)2](+/0) (ca. +0.15 and +0.10 V vs ferrocenium/ferrocene couple for R = Et and iPr, respectively) and to trans-[Ru(ROCS2)2(PPh3)2](+/0) (-0.05 and -0.15 V vs ferrocenium/ferrocene for R = Et and iPr, respectively) couples. Analyses on the basis of the Nicholson and Shain's method revealed that the thermal disappearance rate of transient trans-[Ru(ROCS2)2(PPh3)2] was dependent on the concentration of PPh3 in the bulk: the rate constant for the intramolecular isomerization reaction of trans-[Ru(iPrOCS2)2(PPh3)2] was determined as 0.338 +/- 0.004 s(-1) at 298.3 K (deltaH* = 41.8 +/- 1.5 kJ mol(-1) and deltaS* = -114 +/- 7 J mol(-1) K(-1)), while the dissociation rate constant of coordinated PPh3 from the trans-[Ru(iPrOCS2)2(PPh3)2] species was estimated as 0.113 +/- 0.008 s(-1) at 298.3 K (deltaH* = 97.6 +/- 0.8 kJ mol(-1) and deltaS* = 64 +/- 3 J mol(-1) K(-1)), by monitoring the EC reaction (electrode reaction followed by chemical processes) at different concentrations of PPh3 in the bulk. It was found that the trans to cis isomerization reaction takes place via the partial dissociation of iPrOCS2(-) from Ru(II), contrary to the previous claim that it takes place by the twist mechanism.     

Toward rational construction of gold, gold-silver, and gold-mercury string complexes: syntheses, structures, and properties of [Au(Tab)2]2L2 (L = I and PF6), {[(Tab)2M][Au(CN)2]}2 (M = Au and Ag), and {[Hg(Tab)2][Au(CN)2]2} [Tab = 4-(trimethylammonio)benzenethiolate

The reaction of AuI with 2 equiv of TabHPF6 [TabH = 4-(trimethylammonio)benzenethiol] in the presence of excess Et3N in dimethylformamide (DMF)/MeOH afforded a binuclear gold(I) complex [Au(Tab)2]2I2.2H2O (1). Anion exchange of 1 with NH4PF6 in DMF gave rise to the more soluble complex [Au(Tab)2]2(PF6)2 (2). Treatment of 2 with K[Au(CN)2] produced a tetranuclear gold(I) complex {[(Tab)2Au][Au(CN)2]}2 (3). Analogous reactions of two known mononuclear complexes [Ag(Tab)2](PF6) (4) and [Hg(Tab)2](PF6)2 (5) with 1 or 2 equiv of K[Au(CN)2] generated one Ag2Au2 complex {[(Tab)2Ag][Au(CN)2]}2 (6) and one Au/Hg complex {[Hg(Tab)2][Au(CN)2]2} (7), respectively. Compounds 1-3, 6, and 7 were fully characterized by elemental analysis, IR spectra, UV-vis spectra, 1H NMR, and single-crystal X-ray crystallography. 1 and 2 have a similar [Au(Tab)2]2(2+) dimeric structure in which the two [Au(Tab)2]+ cations are connected via one Au-Au aurophilic interaction. In the structure of 3 or 6, each of the two pairs of [M(Tab)2]+ cation and [Au(CN)2]- anion is held together via ionic interactions to form a {[(Tab)2M][Au(CN)2]} species (M = Au, 3; Ag, 6). Two such species are further connected by one Au-Au aurophilic bonding interaction to form an uncommon Au(4) or Ag2Au2 linear string structure with three ligand-unsupported metal-metal bonds. For 7, the [Hg(Tab)2]2+ dication and the [Au(CN)2]2(2-) dianion are interconnected by the secondary Hg...N(CN) interactions to form a 1D chain structure. The thermal and luminescent properties of 1-3, 6, and 7 in solid state were also investigated.     

Dihydrogen complexes of rhodium: [RhH2(H2)x (PR3)2]+ (R = Cy, iPr; x = 1, 2)

Addition of H2 (4 atm at 298 K) to [Rh(nbd)(PR3)2][BAr(F)4] [R = Cy, iPr] affords Rh(III) dihydride/dihydrogen complexes. For R = Cy, complex 1a results, which has been shown by low-temperature NMR experiments to be the bis-dihydrogen/bis-hydride complex [Rh(H)2(eta2-H2)2(PCy3)2][BAr(F)4]. An X-ray diffraction study on 1a confirmed the {Rh(PCy3)2} core structure, but due to a poor data set, the hydrogen ligands were not located. DFT calculations at the B3LYP/DZVP level support the formulation as a Rh(III) dihydride/dihydrogen complex with cis hydride ligands. For R = iPr, the equivalent species, [Rh(H)2(eta2-H2)2(P iPr3)2][BAr(F)4] 2a, is formed, along with another complex that was spectroscopically identified as the mono-dihydrogen, bis-hydride solvent complex [Rh(H)2(eta2-H2)(CD2Cl2)(P iPr3)2][BAr(F)4] 2b. The analogous complex with PCy3 ligands, [Rh(H)2(eta2-H2)(CD2Cl2)(PCy3)2][BAr(F)4] 1b, can be observed by reducing the H2 pressure to 2 atm (at 298 K). Under vacuum, the dihydrogen ligands are lost in these complexes to form the spectroscopically characterized species, tentatively identified as the bis hydrides [Rh(H)2(L)2(PR3)2][BAr(F)4] (1c R = Cy; 2c R = iPr; L = CD2Cl2 or agostic interaction). Exposure of 1c or 2c to a H2 atmosphere regenerates the dihydrogen/bis-hydride complexes, while adding acetonitrile affords the bis-hydride MeCN adduct complexes [Rh(H)2(NCMe)2(PR3)2][BAr(F)4]. The dihydrogen complexes lose [HPR3][BAr(F)4] at or just above ambient temperature, suggested to be by heterolytic splitting of coordinated H2, to ultimately afford the dicationic cluster compounds of the type [Rh6(PR3)6(mu-H)12][BAr(F)4]2 in moderate yield.     

Influence of hydrogen bonding on the assembly of six-membered vanadium borophosphate cluster anions: synthesis and structures of (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12](6)10H2O, (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12](6)17H2O, and (NH4)3(C4H14N2)4 5[Sr(H2O)5]2[Sr(H2O)4][V2P2BO12]6 10H2O

Three new strontium vanadium borophosphate compounds, (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12]6 10H2O (Sr-VBPO1) (1), (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12]6 17H2O (Sr-VBPO2) (2), and (NH4)3(C4H14N2)4.5[Sr(H2O)5]2[Sr(H2O)4][V2P2BO12]6 10H2O (Sr-VBPO3) (3) have been synthesized by interdiffusion methods in the presence of diprotonated ethylenediamine, 1,3-diaminopropane, and 1,4-diaminobutane. Compound 1 has a chain structure, whereas 2 and 3 have layered structures with different arrangements of [(NH4) [symbol: see text] [V2P2BO12]6] cluster anions within the layers. Crystal data: (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12]6 10H2O, monoclinic, space group C2/c (no. 15), a = 21.552(1) A, b = 27.694(2) A, c = 20.552(1) A, beta = 113.650(1) degrees, Z = 4; (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12]6 17H2O, monoclinic, space group I2/m (no. 12), a = 15.7618(9) A, b = 16.4821(9) A, c = 21.112(1) A, beta = 107.473(1) degrees, Z = 2; (NH4)3(C4H14N2)4.5[Sr(H2O)5]2[Sr(H2O)4] [V2P2BO12]6 10H2O, monoclinic, space group C2/c (no. 15), a = 39.364(2) A, b = 14.0924(7) A, c = 25.342(1) A, beta = 121.259(1) degrees, Z = 4. The differences in the three structures arise from the different steric requirements of the amines that lead to different amine-cluster hydrogen bonds.     

Synthesis, Raman spectra and crystal structures of [Cu(XeF2)n](SbF6)2 (n=2, 4)

Pure [Cu(XeF2)2](SbF6)2 was prepared by the reaction of Cu(SbF 6) 2 with a stoichiometric amount of XeF2 in anhydrous hydrogen fluoride (aHF) at ambient temperature. The reaction between Cu(SbF6)2 and XeF2 (1:4 molar ratio) in aHF yielded [Cu(XeF2)4](SbF6)2 contaminated with traces of Xe 2F 3SbF6 and CuF2. The 6-fold coordination of Cu(2+) in [Cu(XeF2)2](SbF6)2 includes two fluorine atoms from two XeF2 ligands and four fluorine atoms provided by four [SbF6](-) anions. The neighboring [Cu(XeF 2)2](2+) moieties are connected via two [SbF6] units, with the bridging fluorine atoms in cis positions, into infinite [Cu(eta(1)-XeF2)2](cis-eta(2)-SbF 6)2[Cu(eta(1)-XeF 2)2] chains. Because of the high electron affinity of Cu(2+), coordinated XeF2 shows the highest distortion (Xe-Fb=210.2(5) pm, Xe-Ft=190.6(5) pm) observed so far among all known [M(x+)(XeF2)n](A)x (A=BF4, PF6, etc.) complexes. The four equatorial coordination sites of the Cu(2+) ion in [Cu(XeF 2) 4](SbF6)2 are occupied by four XeF 2 ligands. Two fluorine atoms belonging to two [SbF6] units complete the Cu (2+) coordination environment. The neighboring [Cu(XeF2)4](2+) species are linked via one [SbF6] unit, with bridging fluorine atoms in trans positions, into linear infinite [Cu(eta(1)-XeF2)4](trans-eta(2)-SbF6)[Cu(eta(1)-XeF2)4] chains. To compensate for the remaining positive charge, crystallographically independent [SbF6](-) anions are located between the chains and are fixed in the crystal space by weak Xe...F(Sb) interactions.     

Bis(2, 2, 2-trichloroethoxy)cobalt(II) and chloro(2, 2, 2-trichloroethoxy) cobalt(II): synthesis and coordination chemistry

Summary Bis(2, 2, 2-trichloroethoxy) cobalt(II) and chloro(2, 2, 2-trichloroethoxy)cobalt(II) [Co(OCH₂CCl₃)₂·L] and [CoCl(OCH₂CCl₃)·L], derivatives (L=tetrahydrofuran, dioxan, triphenylarsine oxide, or pyridine) have been synthesised and characterized. They have tetrahedral geometry both in solution and in the solid state.     

Self-encapsulation of [MII(phen)2(H2O)2]2+ (M=Co, Zn) in one-dimensional nanochannels of [MII(H2O)6(BTC)2]4- (M=Co, Cu, Mn): a high HQ/CAT ratio catalyst for hydroxylation of phenols

Four novel three-dimensional (3D) microporous supramolecular compounds containing nanosized channels, namely, [Co(phen)2(H2O)2]2[Co(H2O)6].2BTC.21.5H2O (1), [Co(phen)2(H2O)2]2[Cu(H2O)6].2BTC.21.5H2O (2), [Co(phen)2(H2O)2]2[Mn(H2O)6].2BTC.18H2O (3), and [Zn(phen)2(H2O)2]2[Mn(H2O)6].2BTC.22.5H2O (4), were synthesized from 1,3,5-benzenetricarboxylate (BTC), 1,10-phenanthroline (phen), and the transition-metal salt(s) by self-assembly. Single-crystal X-ray structural analysis showed that the resulting 3D microporous supramolecular frameworks consist of a two-dimensional (2D) hydrogen-bonded host framework of [MII(H2O)6(BTC)2]4- (M=Co for 1, Cu for 2, Mn for 3, 4) with rectangular-shaped cavities containing [MII(phen)2(H2O)2]2+ (M=Co for 1-3, Zn for 4) guests. The guest complex is encapsulated in the 2D hydrogen-bonded host framework by hydrogen bonding and aromatic pi-pi stacking interactions, forming the 3D hydrogen-bonded framework. The catalytic activities of 1, 2, 3, and 4 were studied using hydroxylation of phenols with 30% aqueous H2O2 as a test reaction. The compounds displayed a good phenol conversion ratio and excellent channel selectivity in the hydroxylation reaction, with a maximum hydroquinone (HQ)/catechol (CAT) ratio of 3.9.     

Mixed-valent selenidoantimonates(III,V) with transition-metal complexes as counterions: solvothermal syntheses and characterization of [M(dien)2]2Sb4Se9 (M = Mn, Fe), [Co(dien)2]2Sb2Se6, and [Ni(dien)2]2Sb2Se5

Novel selenidoantimonate compounds [M(dien)2]2Sb4Se9 [M = Mn (1), Fe (2)], [Co(dien)2]2Sb2Se6 (3), and [Ni(dien)2]2Sb2Se5 (4) (dien = diethylenetriamine) were solvothermally synthesized and characterized. The unique features of compounds 1-3 are the mixed-valent anionic structures constructed by the Sb(III)Se3 trigonal pyramid and Sb(V)Se4 tetrahedron. Three Sb(III)Se3 pyramids share common corners, forming a heterocyclic Sb3Se6 moiety, and the Sb3Se6 moieties are further connected with Sb(V)Se4 tetrahedra to form the novel one-dimensional [Sb4Se9(4-)]n anionic chain in 1 and 2. The discrete [Sb2Se6]4- anion in 3 is formed by an Sb(III)Se3 trigonal pyramid and an Sb(V)Se4 tetrahedron sharing a common corner. The [Sb2Se5]4- anion in 4 is composed of two Sb(III)Se3 trigonal pyramids connected in the same manner as the [Sb2Se6]4- anion. The mixed-valent [Sb4Se9(4-)]n and [Sb2Se6]4- anions were not observed before. The synthesis and solid-state structural studies of the title compounds show that the transition-metal complexes exhibit different structure-directing effects on the formation of selenidoantimonates in dien. Extensive N-H...Se hydrogen bonds are observed between cations and anions in compounds 1-4, resulting in three-dimensional network structures. Optical and thermal properties of the compounds are reported.     

Complexes of (bpy)2Ru(II) and (Ph2bpy)2Ru(II) with a series of thienophenanthroline ligands: synthesis,characterization, and electronic spectra

A series of complexes (bpy)₂LRu(II) and (Ph₂bpy)₂LRu(II), where bpy is 2,2′-bipyridine, Ph₂bpy is 4,4′-diphenyl-2,2′-bipyridine and L is 1,10-phenanthroline (phen), [1]benzothieno[2,3-c][1,10]phenanthroline (btp), naphtho[1′,2′?:?5,4]thieno[2,3-c][1,10]phenanthroline [ntpl, l=linear], and naphtho[1′,2′?:?4,5]thieno[2,3-c][1,10]phenanthroline (ntph, h=helical) were synthesized and characterized using 2D COSY NMR spectra. The UV spectra were assigned to study their metal to ligand charge transfer (MLCT) excited states. Complexes of (bpy)₂LRu(II) showed identical absorption wavelengths (λ _max) for the MLCT of all four members of the series with the only variation being the intensity (log _ε ) for each. The MLCT of (Ph₂bpy)₂LRu(II) showed the similar behavior only with different wavelengths showing that in this heteroleptic series of complexes the MLCT is exclusively to the bpy ligands with none to thienophenanthroline (btp, ntpl, or ntph).     

Tuning intermolecular magnetic exchange interactions in the solids C(x)F(2)(x)(CNSSS)(2)(AsF(6))(2): structural, EPR, and magnetic characterization of dimeric (x = 2, 4) diradicals

A series of diradical containing salts CxF2x(CNSSS)2(**2+0(AsF6-)2 {x = 2, 1[AsF6]2; x = 3, 3[AsF6]2; x = 4, 2[AsF6]2} have been prepared. 1[AsF6]2 and 2[AsF6]2 were fully characterized by X-ray, variable-temperature magnetic susceptibility, and solid-state EPR measurements, further allowing us to extend the number of examples of the family of rare 7pi RCNSSS(*+) radical cations. 1[AsF6]2: a = 6.5314(7) A, b = 7.5658(9) A, c = 9.6048(11) A, alpha = 100.962(2) degrees , beta = 96.885(2) degrees , gamma = 107.436(2) degrees , triclinic, space group P, Z = 1, T = 173 K. 2[AsF6]2: a = 10.6398(16) A, b = 7.9680(11) A, c = 12.7468(19) A, beta = 99.758(2) degrees , monoclinic, space group P21/c, Z = 2, T = 173 K. In the solid-state, CxF2x(CNSSS)2(**2+) (x = 2, 4) formed one-dimensional polymeric chains of dications containing discrete centrosymmetric radical pairs in which radicals were linked by four centered two-electron pi*-pi* bonds [12+, d(S...S) = 3.455(1) A; 22+, d(S...S) = 3.306(2) A]. The exchange interactions in these bonds were determined to be -500 +/- 30 and -900 +/- 90 cm-1, by variable temperature magnetic susceptibility measurements, respectively, providing rare experimental data on the singlet-triplet gaps in the field of thiazyl radicals. For 2[AsF6]2, the thermally excited triplet state was unambiguously characterized by EPR techniques [/D/ = 0.0254(8) cm(-1), /E/ = 0.0013(8) cm(-1)]. These experimental data implied a weakly associated nature of the radical moieties contained in the solids 1[AsF6]2 and 2[AsF6]2. Computational analysis of the dimerization process is presented, and we show that the 2c 4 electron pi*-pi* bonds in 1[AsF6]2 and 2[AsF6]2 have ca. 50% and 40% diradical character, respectively. In contrast, 3[AsF6]2.SO2, containing diradical C3F6(CNSSS)2(**2+) with an odd number of CF2 spacers, showed magnetic behavior that was consistent with the presence of monomeric radical centers in the solid state.     

1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-: a noninnocent ligand. Syntheses, structures, and mechanisms of formation of [(n-Bu)4N][FeIV2(mu-N)(bpb)2(X)2] (X = CN-, N3-) and the electronic structures of [MIII(bpbox1)(CN)2] (M = Co, Fe)

The well-known tetradentate ligand 1,2-bis(pyridine-2-carboxamido)benzenate(2-), (bpb)2-, and its 4,5-dichloro analogue, (bpc)2-, are shown to be "noninnocent" ligands in the sense that in coordination compounds they can exist in their radical one- and diamagnetic two-electron-oxidized forms (bpbox1)- and (bpbox2)0 (and (bpcox1)- and (bpcox2)0), respectively. Photolysis of high-spin [(n-Bu)4N][FeIII(bpb)(N3)2] and its (bpc)2- analogue in acetone solution at room temperature generates the diamagnetic dinuclear complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(N3)2] and its (bpc)2- analogue; the corresponding cyano complex [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2] has been prepared via N3- substitution by CN-. Photolysis in frozen acetonitrile solution produces a low-spin ferric species (S = 1/2) which presumably is [FeIII(bpbox2)(N)(N3)]-, as has been established by EPR and M?ssbauer spectroscopy. The mononuclear complexes [(n-Bu)4N][FeIII(bpb)(CN2)] (low spin), [Et4N][CoIII(bpb)(CN)2] and Na[CoIII(bpc)-(CN)2].3CH3OH can be electrochemically or chemically one-electron-oxidized to give [FeIII(bpbox1)(CN)2]0 (S = 0), [CoIII(bpbox1)(CN)2]0 (S = 1/2), and [CoIII(bpcox1)(CN)2]0 (S = 1/2). All complexes have been characterized by UV-vis, EPR, and M?ssbauer spectroscopy, and their electro- and magnetochemistries have been studied. The crystal structures of [(n-Bu)4N][FeIII(bpb)(N3)2].1/2C6H6CH3, Na[FeIII(bpb)(CN)2], Na[CoIII(bpc)(CN)2].3CH3OH, [(n-Bu)4N][FeIV2(mu-N)(bpb)2(CN)2], and [(n-Bu)4N][FeIV2(mu-N)(bpb)(N3)2] have been determined by single-crystal X-ray diffraction.     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

A family of alkynylgold(III) complexes [AuI(mu-{CH2}2PPh2)2Au(III)(C triple bond CR)2] (R = Ph, tBu, Me3Si): facile and reversible comproportionation of gold(I)/gold(III) to digold(II)

The symmetric digold(II)dichloride bis(ylide) complex [Au2Cl2(mu-{CH2}2PPh2)2] reacts with acetylides to form the asymmetric heterovalent gold(I)/gold(III) complexes [AuI(mu-{CH2}2PPh2)2AuIII(CCR)2] [R = Ph, tBu, and SiMe3], the phenyl analogue of which was characterized by X-ray crystallography. These compounds represent the first examples of gold(III) complexes containing two acetylide ligands. [AuI(mu-{CH2}2PPh2)2AuIII(CCPh)2] undergoes a reversible comproportionation reaction upon treatment with [Ag(ClO4)tht] to give the symmetric digold(II) cationic complex [Au2(tht)2(mu-{CH2}2PPh2)2](ClO4)2. If this complex is treated with phenylacetylene in the presence of base, the heterovalent gold(I)/gold(III) complex is re-formed. This reversible interconversion between binuclear gold(I)/gold(III) and digold(II) bis(ylide) complexes is unprecedented.     

2D LnIII RuIII 2 compounds constructed from trans-[Ru(acac)2(CN)2]-. Syntheses, structures, and magnetic properties

A series of cyano-bridged Ln(III)Ru(III)2 coordination polymers, Ph4P{Ln(NO3)2[Ru(acac)2(CN)2]2} [Ln = Tb (1), Dy (2), Er (3), Gd (4); Hacac = acetylacetone] have been synthesized by the reaction of Ln(NO3)3 with trans-Ph4P[Ru(acac)2(CN)2] in methanol. X-ray crystallographic determination reveals that these compounds are isostructural and have a wavy (4,4) layer structure with the Ln3+ ions bridged by trans-[Ru(acac)2(CN)2]-. Magnetic studies shows that the magnetic coupling between the Ln(III) and Ru(III) ions through the cyano bridges in 1-4 is negligibly weak.     

Novel cation [N(SO2NMe3)2]+ and its synthesis and crystal structure. Dichloride of imido-bis(sulfuric) acid HN(SO2Cl)2. Part 1. Crystal structures of KN(SO2Cl)2.(1/2)CH3CN, KN(SO2Cl)2.(1/6)CH2Cl2, and [PCl4][N(SO2Cl)2

Several salts of bis(chlorosulfonyl)imide HN(SO2Cl)2 (1), namely, two solvates of its potassium salt, KN(SO2Cl)2.(1/2)CH3CN (1K1), KN(SO2Cl)2.(1/6)CH2Cl2 (1K2), and its tetrachlorophosphonium salt, [PCl4][N(SO2Cl)2] (2), were prepared and structurally characterized. The reaction of HN(SO2Cl)2 with Me3N gives the [N(SO2Cl)2]- salt of a novel cation, [N(SO2NMe3)2]+. This cation is analogous to the [HC(SO2NMe3)2]+ cation, but in contrast to the latter, it is fairly stable to hydrolysis. The salt [N(SO2NMe3)2]+[N(SO2Cl)2]- (3) can be converted into salts of other anions by being treated with diluted aqueous solutions of the respective acids, and thus NO3-, Cl-.H2O, SeO3(2-), CH3COO-, HSO4-, (COO)2(2-) salts were prepared. Treatment of 3 with concentrated HNO3 gave the [N(SO2NMe3)2]+ [O2NO-H-ONO2]- salt, and the addition of an HCl-acidified FeCl3 aqueous solution yielded the FeCl4- salt. Methanolysis resulted in the formation of MeOSO3- and [MeOSO2NSO2OMe]- salts. All salts have been characterized by chemical analysis, vibrational spectroscopy, and X-ray structure determinations.     

Cerium(III) dialkyl dithiocarbamates from [Ce[N(SiMe3)2]3] and tetraalkylthiuram disulfides, and [Ce(kappa2-S2CNEt2)4] from the Ce(III) precursor; Tb(III) and Nd(III) analogues

The synthesis and characterisation of the first neutral cerium dialkyl dithiocarbamate complexes, using a novel oxidative displacement of the amido ligands of [Ce[N(SiMe3)2]3] by tetraalkylthiuram disulfides [R2NC(S)S]2(R = Me, Et) in thf solution, are reported. In the absence of other donors, the complexes [Ce(kappa2-S2CNMe2)3(thf)2] and Ce(kappa2-S2CNEt2)3) 3 were obtained. The addition of a polypyridyl ligand allowed easy access to a range of complexes of general formula [Ce(kappa2-S2CNR2)3(L[intersection]L)][R = Me and L([intersection])L = 2,2'-bipy (4), or 4,7-diphenyl-1,10-phenanthroline (6); or R = Et and L[intersection]L = 2,2'-bipy (5)]. Brief exposure of the Ce(III) dithiocarbamate to oxygen gas afforded in high yield the diamagnetic, crystalline Ce(IV) dithiocarbamate [Ce(kappa2-S2CNEt2)4)] 7. The neodymium (8) and terbium (10) complexes, isoleptic with 2, were prepared from the appropriate 4f metal (Ln) bis(trimethylsilyl)amide [Ln[pN(SiMe3)2]3][Ln = Nd or Tb (9)] and [Me2NC(S)S]2. The structures of the crystalline complexes, 2, 4, 6, 7, 9 and 10 have been determined by X-ray crystallography. Some evidence has been obtained for the formation of the cerium(IV) complex Ce[N(SiMe3)2]2(kappa2-S2CNMe2)2. The cerium(IV) complex 7 has the metal coordinated to eight sulfur atoms of four planar chelating S2CNC2 moities and its geometry is intermediate between dodecahedral and square prismatic; the mean Ce-S bond length of 2.803 A in 7 compares with the 2.950 A in the Ce(III) complex 2.