Transition metal ion complexes of thiosemicarbazones derived from 2-acetylpyridine. Part 1. The4N-methyl derivative

Summary A series of metal ion complexes of the thiosemicarbazone,N-methyl-2[1-(2-pyridinyl)ethylidene]-hydrazinecarbothioamide (HL4M) has been prepared and spectrally characterized. HL4M coordinates either as a neutral bidentate ligand (i.e., pyridyl N and imine N) or as deprotonated tridentate ligand (i.e., pyridyl N, imine N and thiol sulphur). The cobalt(II) salts yield hexacoordinated cobalt(III) cations, and an isoelectronic species, [Ni(L4M)₂], has been formed from Ni(C₂H₃O₂)₂. The remaining nickel(II) complexes involve the neutral ligand, as do two of the three copper(II) complexes. HL4M possesses a weaker ligand field and has less covalency in its bonding than related thiosemicarbazones that possess anN-dialkyl-function.     

Some Novel Cobalt Diphenylphosphine Complexes: Synthesis,Characterization, and Behavior in the Polymerization of 1,3-Butadiene

Some novel cobalt diphenylphosphine complexes were synthesized by reacting cobalt(II) chloride with (2-methoxyethyl)diphenylphosphine, (2-methoxyphenyl)diphenylphosphine, and 2-(1,1-dimethylpropyl)-6-(diphenylphosphino)pyridine. Single crystals suitable for X-ray diffraction studies were obtained for the first two complexes, and their crystal structure was determined. The novel compounds were then used in association with methylaluminoxane (MAO) for the polymerization of 1,3-butadiene, and their behavior was compared with that exhibited in the polymerization of the same monomer by the systems CoCl₂(PⁿPrPh₂)₂/MAO and CoCl₂(PPh₃)₂/MAO. Some significant differences were observed depending on the MAO/Co ratio used, and a plausible interpretation for such a different behavior is proposed.     

Crystal Structure and Ethylene Oligomerization Catalytic Activity of {2-Carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2

The unsymmetric precursor ethyl 6-acetylpyridine-2-carboxylate （4） was synthesized from 2,6-dimethylpyridine （1）. On the basis of this precursor, a new mono（imino）pyridine ligand （5） and the corresponding Co（Ⅱ） complex {2-carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2 （6） were prepared. The crystal structure of complex indicates that the 2-carbethoxy-6-iminopyridine is coordinated to the cobalt as a tridentate ligand using [N, N, O] atoms, and the coordination geometry of the central cobalt is a distorted trigonal bipyramid, with the pyridyl nitrogen atom and the two chlorine atoms forming the equatorial plane. Being applied to the ethylene oligomedzation, this cobalt complex shows catalytic activity of 1.820× 10^4 g/mol-Cooh at 101325 Pa of ethylene at 15.5℃ for 1 h, when 1000 equiv, of methylaluminoxane （MAO） is employed as the cocatalyst.     

Cobalt(II) complexes of a pyridyl/benzimidazol-1-yl-based ligand: syntheses,crystal structures,and photoluminescent properties

Abstract  Two new cobalt(II) coordination polymers with a pyridyl/benzimidazol-1-yl-based ligand, namely 1-(4-pyridylmethyl)-1H-benzimidazole (L), were synthesized and characterized structurally by single crystal X-ray diffraction as [Co(L)₂(SCN)₂]_∞ (1) and [Co(L)₂(N₃)₂]_∞ (2). Complex 1 has a three-dimensional twofold interpenetrating diamondoid network, while 2 possesses a one-dimensional chain structure, which is further interlinked into a higher-dimensional supramolecular framework by hydrogen-bonding interactions. The structural differences between complexes 1 and 2 are attributable to the different auxiliary ligands, SCN⁻ for 1 and N₃ ⁻ for 2. The luminescent properties of the complexes and the free ligand have been investigated. Graphical Abstract  Two new Co(II) complexes having 3-D and 1-D structures have been successfully prepared through auxiliary ligand-controlled self-assembly reactions of Cobalt salts with a pyridyl/benzimidazol-1-yl-based ligand. Moreover, luminescent properties of these complexes and the corresponding ligand have also been investigated. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Hydrothermal Syntheses and Crystal Structures of Compounds Based on <Emphasis Type="Italic">α</Emphasis>- or <Emphasis Type="Italic">β</Emphasis>-[Mo<Subscript>8</Subscript>O<Subscript>26</Subscript>]<Superscript>4−</Superscript> Isomers

Using Cu(II/I)/Ni(II) complex fragments and [Bu₄N]₄[α-Mo₈O₂₆] as precursors, four compounds based on α- or β- octamolybdate isomers, [{Cu(tpdoen)}₂][α-Mo₈O₂₆]·3H₂O 1 (tpdoen = 2-(pyridin-2-ylmethoxy)-N-(2-(pyridin-2-ylmethoxy)ethyl)-N-(pyridin-2-ylmethyl)ethanamine); [{Cu(dpoen)}₂(α-Mo₈O₂₆)] 2 (dpoen = 2-(pyridin-2-ylmethoxy)-N-(pyridin-2-ylmethyl)ethanamine); [{Cu(dpmea)}₂(β-Mo₈O₂₆)] 3 (dpmea = N,N-diethyl-N-(pyridin-2-ylmethyl)ethanaminium); [{Ni(tpoen)}₂(β-Mo₈O₂₆)]·5H₂O 4 (tpoen = 2-(pyridin-2-ylmethoxy)-N,N-bis(pyridin-2-ylmethyl)ethanamine) were hydrothermally synthesized. They have been characterized by elemental analysis, FT-IR, TG analysis and single-crystal X-ray diffraction. Compound 1 is a discrete structure constructed from [α-Mo₈O₂₆]⁴⁻ anions and [Cu(tpdoen)]²⁺ coordination cations. The coordination cations aggregate around an octamolybdate anion via hydrogen bonding interactions, forming a “flowerpot” supramolecular network. Compound 2 is constructed from [α-Mo₈O₂₆]⁴⁻ anions bridged through [Cu(dpoen)]²⁺ fragments into a 2D layered grid. Compounds 3 and 4 are Cu(I) and Cu(II) complexes bis-supported by [β-Mo₈O₂₆]⁴⁻ anions, respectively. The electrochemical behaviors of compounds 1–4 modified solid bulk-modified carbon paste electrodes (1-MCPE-4-MCPE) have been studied.     

Polymerization of Methyl Methacrylate with Ni(II) α‐Diimine/MAO and Fe(II) and Co(II) Pyridyl Bis(imine)/MAO

Polymerizations of methyl methacrylate with (α‐diimine)nickel(II)/methylaluminoxane (MAO) and (pyridyl bis(imine))iron(II) and (pyridyl bis(imine))cobalt(II)/MAO are reported. Effects of structural variation of the ligand on the activities of catalysts and polymer microstructure are described. The catalyst systems gave syndio‐rich poly(methyl methacrylate). The α‐diimine system showed much higher activity than the pyridyl bis(imine) systems under similar polymerization conditions.

     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Cycloheptyl‐fused NNO‐ligands as electronically modifiable supports for M(II) (M = Co,Fe) chloride precatalysts; probing performance in ethylene oligo‐/polymerization

The N,N,O‐cobalt(II), [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]CoCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Co1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Co2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Co3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Co4 ) and N,N,O‐iron(II) complexes, [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]FeCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Fe1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Fe2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Fe3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Fe4 ), each containing one sterically enhanced but electronically modifiable N‐2,6‐dibenzhydryl‐4‐R²‐phenyl group, have been prepared by a one‐pot template approach using α,α′‐dioxo‐2,3:5,6‐bis(pentamethylene)pyridine, the corresponding aniline along with the respective cobalt or iron salt in acetic acid. Distorted square pyramidal geometries are a feature of the molecular structures of Co1 – Co4 . Upon activation with MAO or MMAO, Co1 – Co4 show good activities (up to 2.2 × 10⁵ g mol^?1(Co) h^?1) affording short chain oligomers (C₄–C₃₀) with good α‐olefin selectivity. By contrast, Fe1 – Fe4 , in the presence of MMAO, displayed moderate activities (up 10.9 × 10⁴ g(PE) mol^?1(Fe) h^?1) for ethylene polymerization forming low‐molecular‐weight linear polymers (up to 13.0 kg mol^?1) incorporating saturated n‐propyl and i‐butyl chain ends. For both cobalt and iron, the precatalysts incorporating the more electron withdrawing 4‐R²‐substituents [Cl ( Co3 / Fe3 ), F ( Co4 / Fe4 )] deliver the best catalytic activities, while with cobalt, these types of substituents additionally broaden the oligomeric distribution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3980–3989     

Synthesis and monoamine oxidase A/B inhibitory evaluation of new benzothiazole-thiazolylhydrazine derivatives

Abstract

In this study, a novel series of benzothiazole-thiazolylhydrazine (3a–3i) was synthesized and their structures were characterized by ¹H-NMR, ¹³C-NMR spectrometry, and mass spectroscopy. These compounds were evaluated as inhibitors of type A and type B monoamine oxidase (MAO) enzymes. The most active compound 3b (2-((2-(2-(4-(4-Nitrophenyl)thiazol-2-yl)hydrazineylidene)-2-phenylethyl)thio)benzothiazole) showed strong inhibitory activity at hMAO-A (IC₅₀ of 0.095?±?0.004?µM). Furthermore, compound 3i (2-((2-(2-(4-(2,4-dichlorophenyl)thiazol-2-yl)hydrazineylidene)-2-phenylethyl)thio)benzothiazole) showed significant inhibition profile on hMAO-A with the IC₅₀ values 0.141?±?0.006?µM.     

Polymerization of Norbornene with CoCl2 and Pyridine Bisimine Cobalt(II) Complexes Activated with MAO

Addition polymerization of norbornene was performed with several pyridine bis(imine) cobalt dichloride complexes activated with methylaluminoxane (MAO), first described for ethylene polymerization. For the first time, norbornene was also polymerized with CoCl₂ associated to MAO. The influence of several reaction parameters has been investigated. Quite different behavior was observed compared with ethylene polymerization. Moreover, the copolymerization of ethylene and norbornene with these complexes was not possible but led to a mixture of both homopolymers.

The pyridine bis(imine) cobalt dichloride complexes used in this study.     

Syntheses and crystal structures of two novel Cu(II) and Co(II) complexes with 3-methyl-4-(p-bromophenyl)-5-(2-pyridyl)-1,2,4-triazole

A new ligand, 3-methyl-4-(p-bromophenyl)-5-(2-pyridyl)-1,2,4-triazole (L) and its complexes, trans-[CuL₂(ClO₄)₂] (1) and cis-[CoL₂(H₂O)₂](ClO₄)₂·H₂O·CH₃OH (2), have been synthesized and characterized by UV, IR, electrospray ionization mass spectrum, elemental analyses, and single-crystal X-ray diffraction methods. In the structure, two L ligands are stabilized by intermolecular π···π interactions between the triazole rings. In the complexes, each L ligand adopts a chelating bidentate mode through N atom of pyridyl group and one N atom of the triazole. Both complexes have a similar distorted octahedral [MN₄O₂] core (M = Cu²⁺ and Co²⁺) with two ClO₄ ⁻ ions in the trans position in 1 but two H₂O molecules in the cis arrangement in 2.     

Iridium(iii)-(hydrido)cyclometallated-imine complexes and metal-promoted hydrolytic cleavage of imines

The room temperature reaction of the complex cis,trans,cis-[Ir(H)₂(PPh₃)₂(Solv)₂]PF₆ (Solv is a solvent) with the imine PhCH₂N=CHPh in acetone generates (with loss of H₂) the orthometallated complex [Ir(H){PhCH₂N=CH(o-C₆H₄)}(PPh₃)₂(Me₂CO)]PF₆ (3) containing a five-membered cyclometallated imine moiety. In MeOH, the reaction at an imine : Ir ratio = 1 leads to the corresponding MeOH analog of 3, while with excess imine, the mixed orthometallated imine/bezylamine complex [Ir(H){PhCH₂N=CH(o-C₆H₄)}(PPh₃)₂(PhCH₂NH₂)]PF₂ (4) is formed; the source of the coordinated amine is an Ir-promoted hydrolysis of the imine, the water likely coming from imine. Complexes 3 and 4 are fully characterized by elemental analysis, ¹H and ³¹P{¹H} NMR spectroscopy, and X-ray crystal structure analysis.     

Cobalt(II) chloro complexation in N-methylformamide–N, N-dimethylformamide mixtures

Cobalt(II) chloro complexation has been studied by titration calorimetry and spectrophotometry in solvent mixtures of N-methylformamide (NMF) and N,N-dimethylformamide (DMF). It revealed that a series of mononuclear CoCln_n ^(2–n)+ (n=1–4) complexes are formed in the mixtures of NMF mole fraction x _NMF=0.05 and 0.25, and the CoCl⁺, CoCl₃ ^– and CoCl₄ ^2– complexes in the mixture of x _NMF=0.5, and their formation constants, enthalpies and entropies were obtained. As compared with DMF, the complexation is markedly suppressed in the mixtures, as well as in NMF. The decreasing formation constant of CoCl⁺ with the NMF content is mainly ascribed to the decreasing formation entropy. DMF is aprotic and thus less-structured, whereas NMF is protic to form hydrogen- bonded clusters. In DMF-NMF mixtures, solvent clusters in neat NMF are ruptured to yield new clusters involving DMF, the structure of which depends on the solvent composition. The entropy of formation of CoCl⁺ will be discussed in relation to the liquid structure of DMF, NMF and their mixtures.     

Synthesis of some benzimidazole- and benzothiazole-derived ligand systems and their precursory diacids

Procedures are described for the preparation of various bidentate and linear tetradentate benzimidazoles and benzothiazoles incorporating units such as pyridyl and thioether, and for the preparation of certain thioether dicarboxylic acids precursory to them. Condensations of ortho-functinal anilines with carboxylic acids were carried out in polyphosphoric acid or refluxing HCl solution. Syntheses are reported for: [HO₂C(CH₂)2S(CH₂)₂]₂X (X = O, S), 1,9-bis(benzimidazol-2-yl)-2,5,8-trithianonane, 1,11-bis(N-methylbenzimidazol-2-yl)-3,6,9-trithiaundecane, 1,11-bis(2-benzimidazol-2-yl)-6-oxo-3,9-dithiaundecane, 2-(2-pyridyl)benzothiazole, 2,6-bis(benzothiazol-2-yl)pyridine, 2-(2-pyridyl)-N-methylbenzimidazole, 2-(2-pyridylmethyl)benzimidazole and 2-(N-methyl-2-piperidyl)benzimidazole. The compounds were characterized, where appropriate, by their mass, uv and ¹H-nmr spectra.     

Reactions of 2-(4,5-dihydro-3-furyl)-1,3-diphenyl-1,3-diaza-2λ<Superscript>3</Superscript>-phospholidine and 4,5-dihydro-3-furylphosphonous diamides with nitrile imines

Reactions of 2-(4,5-dihydro-3-furyl)-1,3-diphenyl-1,3-diaza-2λ³-phospholidine (1) with nitrile imines are multistep processes involving cleavage of one P-N bond of the diazaphospholidine ring to form substituted 5-(2-chloroethyl)-4-(N,N′-diphenylethylenediamino)-1,4-dihydro-1,2,4λ⁵-diazaphosphorines 4 as final products. Analogs of phospholidine 1, namely, 4,5-dihydro-3-furylphosphonous dipiperidide and dimorpholide, react with C,N-diphenylnitrile imine with retention of both P-N bonds to give 5-(2-hydroxyethyl)-1,2,4-diazaphosphorinium chlorides. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1590–1593, July, 2005.     

Polymerization of norbornene with Co(II) complexes

The norbornene polymerization was studied in the presence of 6 pyridine bis(imine) cobalt(II) complexes activated with methylaluminoxane (MAO). Norbornene was also polymerized with CoCl₂ associated to MAO. All these catalytic systems generate an addition polymerization of norbornene, yielding fully saturated polymers. It was shown that the polymerization yield and the molar masses are highly dependant on several reaction parameters (monomer concentration, [Al]/[Co] ratio, polymerization temperature and time) and the frame of the ligand.     

Reactivity trends of cobalt(III) complexes towards various amino acids based on the properties of the amino acid alkyl chains

The reactivity of the cobalt(III) complexes dichlorido[tris(2‐aminoethyl)amine]cobalt(III) chloride, [CoCl₂(tren)]Cl, and dichlorido(triethylenetetramine)cobalt(III) chloride, [CoCl₂(trien)]Cl, towards different amino acids (l ‐proline, l ‐asparagine, l ‐histidine and l ‐aspartic acid) was explored in detail. This study presents the crystal structures of three amino acidate cobalt(III) complexes, namely, (l ‐prolinato‐κ²N,O)[tris(2‐aminoethyl)amine‐κ⁴N,N′,N′′,N′′′]cobalt(III) diiodide monohydrate, [Co(C₅H₈NO₂)(C₆H₁₈N₄)]I₂·H₂O, I , (l ‐asparaginato‐κ²N,O)[tris(2‐aminoethyl)amine‐κ⁴N,N′,N′′,N′′′]cobalt(III) chloride perchlorate, [Co(C₄H₇N₂O₃)(C₆H₁₈N₄)](Cl)(ClO₄), II , and (l ‐prolinato‐κ²N,O)(triethylenetetramine‐κ⁴N,N′,N′′,N′′′)cobalt(III) chloride perchlorate, [Co(C₄H₇N₂O₃)(C₆H₁₈N₄)](Cl)(ClO₄), V . The syntheses of the complexes were followed by characterization using UV–Vis spectroscopy of the reaction mixtures and the initial rates of reaction were obtained by calculating the slopes of absorbance versus time plots. The initial rates suggest a stronger reactivity and hence greater affinity of the cobalt(III) complexes towards basic amino acids. The biocompatibility of the complexes was also assessed by evaluating the cytotoxicity of the complexes on cultured normal human fibroblast cells (WS1) in vitro. The compounds were found to be nontoxic after 24 h of incubation at concentrations up to 25 mM.     

The mononuclear cobalt(II) complex CoII(DMBDIZ)2(NCS)2, where DMBDIZ is 2,6‐di­methyl­benzo[1,2‐d:4,5‐d′]­di­imidazole

In the title mononuclear cobalt complex, bis(2,6‐di­methyl‐1H,7H‐benzo­[1,2‐d:4,5‐d′]­di­imidazole‐κN³)­bis­(thio­cyanato‐κN)cobalt(II), [Co^II(NCS)₂(DMBDIZ)₂] or [Co(NCS)₂(C₁₀H₁₀N₄)₂], the cobalt(II) ion is coordinated to four N atoms, from two thio­cyanate anions and two DMBDIZ ligands, in a distorted tetrahedral geometry. In the DMBDIZ ligand, the two imine N atoms are positioned cis with respect to one another. The crystal packing of the complex is dominated by both hydrogen bonding, involving two N—H?N and two N—H?S interactions, and aromatic π–π stacking.     

Amorphous Polyethylene by Tandem Action of Cobalt and Titanium Single‐Site Catalysts

Summary: A variety of branched polyethylenes, spanning from semicrystalline LLDPE to completely amorphous, rubbery PE, was obtained from ethylene by homogeneous tandem catalysis using combinations of CoCl₂(N) ( 1 ) (N = [1‐(6‐benzo[b]thiophen‐2‐yl‐pyridin‐2‐yl)‐ethylidlene)‐(2,6‐diisopropyl‐phenyl)‐amine) and [(η⁵‐C₅Me₄)SiMe₂(tBuN)]TiCl₂ ( 2 ) in the presence of MAO at 30 °C. The productivity reached a maximum of 4 570 kg PE (mol Ti · h)⁻¹ at χ_Co = 0.50, yielding a rubbery material with d₂₅ = 0.868 g · cm⁻³ and T_g = −55 °C.

Conversion of ethylene into branched polyethylene using Co^II iminopyridyl complex CoCl₂(N) ( 1 ) and TiCl₂[(η⁵‐C₅Me₄)SiMe₂(tBuN)] ( 2 ).     

Cobalt(II) complexes of the 2-aminopicolineN-oxides and 2-amino-4, 6-lutidineN-oxide

Summary Cobalt(II) complexes of the four 2-aminopicolineN-oxides and 2-amino-4, 6-lutidineN-oxide were prepared from Co(BF₄)₂ and CoCl₂, and characterized by partial elemental analyses, magnetic moments, molar conductivities, thermal analyses, and by plasma desorption mass, i.r., electronic, and e.s.r. spectroscopy. The compounds derived from CoCl₂ are 4-coordinate, tetrahedral, molecular solids with CoO₂Cl₂ chromophores. Dq values range from 332 to 382 cm^–1 and those of B from 758 to 813 cm^–1 for the five solids. Three of the compounds prepared from Co(BF₄)₂ are octahedral with the following stoichiometry: [CoL₆](BF₄)₂ where L=2-amino-4-picolineN-oxide and [CoL₅(H₂O)] (BF₄)₂ where L is either 2-amino-3-or 2-amino-5-picolineN-oxide. Both 2-amino-6-picolineN-oxide and 2-amino-4, 6-lutidineN-oxide gave square planar [CoL ₄ ²⁺ ] complex ions. While numerous square planar cobalt(II) centers are known, those described here are probably the first examples with monodentate ligands and a CoO₄ center. They have weak e.s.r. spectra, magnetic moments between 2 and 3 BM and characteristic d-d spectra.