Thickness dependence of optical parameters for ZnTe thin films deposited by electron beam gun evaporation technique

Zinc telluride thin films with different thicknesses have been deposited by electron beam gun evaporation system onto glass substrates at room temperature. X-ray and electron diffraction techniques have been employed to determine the crystal structure and the particle size of the deposited films. The stoichiometry of the deposited films was confirmed by means of energy-dispersive X-ray spectrometry. The optical transmission and reflection spectrum of the deposited films have been recorded in the wavelength optical range 450-2500 nm. The variation of the optical parameters, i.e. refractive index, n, extinction coefficient, k, with thickness of the deposited films has been investigated. The refractive index dispersion in the transmission and low absorption region is adequately described by the single-oscillator model, whereby the values of the oscillator strength, oscillator position, dispersion parameter as well as the high-frequency dielectric constant were calculated for different film thickness. Graphical representations of the surface and volume energy loss function were also presented.     

膜层厚度对金属薄膜光学常数的影响

从麦克斯韦方程出发,可以得到超薄金属膜层光学常数n、k与其厚度有关系的理论依据。采用电阻热蒸发和电子束热蒸发的方法在K9玻璃基底上分别沉积了不同厚度的Cu膜、Cr膜、Ag膜,由椭偏法检测、Drude模型拟合,获得了不同厚度Cu膜、Cr膜、Ag膜光学常数n、k随波长λ的变化规律。超薄金属薄膜与块状金属的光学常数相差较大,随着薄膜厚度的增加,n、k值趋近于块状金属。通过对样品膜层吸收、色散特性的分析,发现连续金属薄膜在可见光波段对长波的吸收较大,而且相比于介质薄膜平均色散率高10mn～102nm量级。     

Synthesis and optical characterization of nanocrystalline CdTe thin films

From several years the study of binary compounds has been intensified in order to find new materials for solar photocells. The development of thin film solar cells is an active area of research at this time. Much attention has been paid to the development of low cost, high efficiency thin film solar cells. CdTe is one of the suitable candidates for the production of thin film solar cells due to its ideal band gap, high absorption coefficient. The present work deals with thickness dependent study of CdTe thin films. Nanocrystalline CdTe bulk powder was synthesized by wet chemical route at pH≈11.2 using cadmium chloride and potassium telluride as starting materials. The product sample was characterized by transmission electron microscope, X-ray diffraction and scanning electron microscope. The structural characteristics studied by X-ray diffraction showed that the films are polycrystalline in nature. CdTe thin films with thickness 40, 60, 80 and 100 nm were prepared on glass substrates by using thermal evaporation onto glass substrate under a vacuum of 10⁻⁶ Torr. The optical constants (absorption coefficient, optical band gap, refractive index, extinction coefficient, real and imaginary part of dielectric constant) of CdTe thin films was studied as a function of photon energy in the wavelength region 400–2000 nm. Analysis of the optical absorption data shows that the rule of direct transitions predominates. It has been found that the absorption coefficient, refractive index (n) and extinction coefficient (k) decreases while the values of optical band gap increase with an increase in thickness from 40 to 100 nm, which can be explained qualitatively by a thickness dependence of the grain size through decrease in grain boundary barrier height with grain size.     

基底对光学薄膜弱吸收测量的影响

 对表面热透镜技术测量光学薄膜弱吸收低频调制时不同基底对测量的影响进行了理论分析。用Lambda—900分光光度计测量了K9和石英基底的Ti₃O₅单层膜的吸收值,将该组样品作为定标片;用表面热透镜装置分别测量了BK7和石英空白基底及HfO₂,ZnO两组不同基底不同厚度单层膜样品的吸收。通过分析比较同一工艺条件下镀制的不同基底薄膜样品用与其同种和不同种基底定标片定标测量的结果,表明在低频测量时需要用与测量样品同种基底的定标片定标;不同厚度样品的测量结果表明,在不能严格满足热薄条件时,测量结果需引入修正值。     

Hydrophilicity of amorphous TiO2 ultra-thin films

The UV-light-induced hydrophilicity of amorphous titanium dioxide thin films obtained by radio frequency magnetron sputtering deposition was studied in relation with film thickness. The effect of UV light irradiation on the film hydrophilicity was fast, strong and did not depend on substrate or thickness for films thicker than a threshold value of about 12 nm, while for thinner films it was weak and dependent on substrate or thickness. The weak effect of UV light irradiation observed for the ultra-thin films (with thickness less than 12 nm) is explained based on results of measurements of surface topography, UV-light absorption and photocurrent decay in vacuum. Comparing to thicker films, the ultra-thin films have a smoother surface, which diminish their real surface area and density of defects, absorb partially the incident UV light radiation, and exhibit a longer decay time of the photocurrent in vacuum, which proves a spatial charge separation. All these effects may contribute to a low UV light irradiation effect on the ultra-thin film hydrophilicity.     

Metallic films forming on the surface of alkali-halide crystals during thermal diffusion of intracrystalline immpurities

It was detected for the first time that films consisting of a transition-metal-based structure form (via thermal diffusion of intracrystalline impurities) on the surface of alkali-halide (LiF, NaF) crystals activated by transition metals Co, Ni, or Mn. The thickness, density, and composition of the films are shown to be different, depending on the heat treatment conditions. The crystals were annealed at temperatures varying from 473 to 1073 K in vacuum and air. The surface structures forming upon annealing in vacuum exhibit magnetic properties. The films were studied by optical, x-ray fluorescence, and electron spectroscopy to reveal the mechanisms of transition-metal film formation during thermal annealing.     

Effect of temperature on residual stress and mechanical properties of Ti films prepared by both ion implantation and ion beam assisted deposition

Ti films with a thickness of 1.6 μm (group A) and 4.6 μm (group B) were prepared on surface of silicon crystal by metal vapor vacuum arc (MEVVA) ion implantation combined with ion beam assisted deposition (IBAD). Different anneal temperatures ranging from 100 to 500 °C were used to investigate effect of temperature on residual stress and mechanical properties of the Ti films. X-ray diffraction (XRD) was used to measure residual stress of the Ti films. The morphology, depth profile, roughness, nanohardness, and modulus of the Ti films were measured by scanning electron microscopy (SEM), scanning Auger nanoprobe (SAN), atomic force microscopy (AFM), and nanoindentation, respectively. The experimental results suggest that residual stress was sensitive to film thickness and anneal temperature. The critical temperatures of the sample groups A and B that residual stress changed from compressive to tensile were 404 and 428 °C, respectively. The mean surface roughness and grain size of the annealed Ti films increased with increasing anneal temperature. The values of nanohardness and modulus of the Ti films reached their maximum values near the surface, then, reached corresponding values with increasing depth of the indentation. The mechanism of stress relaxation of the Ti films is discussed in terms of re-crystallization and difference of coefficient of thermal expansion between Ti film and Si substrate.     

Influence of Annealing Temperature on Structure, Optical Loss and Laser-Induced Damage Threshold of TiO2 Thin Films

TiO2 thin films are prepared on fused silica with conventional electron beam evaporation deposition. After annealed at different temperatures for 4h, the spectra and XRD patterns of the TiO2 thin film are obtained. Weak absorption of coatings is measured by the surface thermal lensing technique, and laser-induced damage threshold （LIDT） is determined. It is found that with the increasing annealing temperature, the transmittance of TiO2 films decreases. Especially when coatings are annealed at high temperature over 1173K, the optical loss is very serious. Weak absorption detection indicates that the absorption of coatings decreases firstly and then increases, and the absorption and defects play major roles in the LIDT of TiO2 thin films.     

Untersuchungen an dünnen Alkalimetallschichten V

At 10^?8 mm Hg thin potassium films are evaporated on a quartz target by means of a potassium atomic beam in a reproducible manner. The big change of the optical absorption and of the electrical conductivity of such films on targets which are either “unbekernt” or “bekernt” is measured as a function of target temperature and film thickness.     

离子束溅射沉积不同厚度铜膜的光学常数研究

利用Lambda-900分光光度计对离子束溅射沉积不同厚度Cu膜测定的反射率和透射率,运用哈德雷方程,并考虑基片后表面的影响,对离子束溅射沉积的Cu膜光学常数进行了计算。结果表明,在同一波长情况下,膜厚小于100 nm的纳米Cu膜光学常数随膜厚变化明显;膜厚大于100 nm后,Cu膜的光学常数趋于一定值。Cu膜不连续时的光学常数与连续膜时的光学常数随波长变化规律不同;不同厚度的连续膜的光学常数随波长变化规律相同,但大小随膜厚变化而变化。     

Photothermal displacement spectroscopy: An optical probe for solids and surfaces

We present a sensitive technique for determining the optical and thermal properties of solids, surfaces and thin films. This technique, photothermal displacement Spectroscopy, is based on the detection of the thermal expansion of a sample upon absorption of electromagnetic radiation. The technique is well suited for in situ ultrahigh vacuum studies and for experiments where wide temperature ranges are required. We show that surface and bulk optical absorption can be distinguished and that surface absorptions of αL=10^?6/W of incident power can be measured. The theoretical basis of the signal generation is given, and excellent experimental and theoretical agreement is demonstrated. The implications of our findings to imaging and microscopy are discussed.     

Investigation of structural features of hexadecafluorinated copper and zinc phthalocyanine films

The structural features of hexadecafluorinated copper and zinc phthalocyanine (MPcF₁₆) films (M = Cu, Zn) obtained by vacuum thermal deposition are investigated. The dependence of structural features of these films on the film thickness is studied by means of optical and Raman spectroscopy. It is shown that an increase in the thickness of MPcF₁₆ films, as well as film annealing under vacuum conditions at a temperature of 220°C, leads to the formation of the phase whose crystalline structure differs from that of the 20-to 50-nm-thick initial films.     

The relationship between refractive index-energy gap and the film thickness effect on the characteristic parameters of CdSe thin films

CdSe thin films were deposited on glass substrates using Successive Ionic Layer Adsorption and Reaction (SILAR) method at room temperature and ambient pressure. The relationship between refractive index and energy bandgap was investigated. The film thickness effect on the structural, morphological, optical and electrical properties of CdSe thin films was investigated. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies showed that all the films exhibit polycrystalline nature with hexagonal structure and are covered well with glass substrates. The crystalline and surface properties of the films improved with increasing film thickness. The optical absorption studies revealed that the films are found to be a direct allowed transition. The energy bandgap values were changed from 1.93 to 1.87 eV depending on the film thickness. The electron effective mass (m_e^?/m_o), refractive index (n), optical static and high frequency dielectric constant (ε_o, ε_∞) values were calculated by using the energy bandgap values as a function of the film thickness. The resistivity of the films changed between 10⁶ and 10² Ω-cm with increasing film thickness at room temperature.     

Optical anisotropy of copper dipivaloylmethanate molecular films

The structures of films obtained from a coordination compound, copper dipivaloylmethanate, and by vacuum vapor deposition onto single crystal silicon substrates are studied. The size of crystals constituting films and intercrystal distances are microscopically estimated with the help of optical and scanning electron microscopes. The refractive index distribution along the film thickness and the optical anisotropy of films are determined by monochromatic zero ellipsometry. The optical anisotropy of films is shown to correlate with the surface morphology.     

Pulsed laser deposition of nanostructured Ag films

Ultra-thin (0.5-5 nm) films of Ag have been prepared by pulsed laser deposition in vacuum using a 26 ns KrF excimer laser at 1 J cm⁻². The deposition was controlled using a Langmuir ion probe and a quartz crystal thickness monitor. Transmission electron microscopy showed that the films are not continuous, but are structured on nanometer size scales. Optical absorption spectra showed the expected surface plasmon resonance feature, which shifted to longer wavelength and increased in strength as the equivalent film thickness was increased. It is shown that Maxwell Garnett effective medium theory can be used to calculate the main features of optical absorption spectra.     

Effect of thickness on physical properties of electron beam vacuum evaporated CdZnTe thin films for tandem solar cells

The thickness and physical properties of electron beam vacuum evaporated CdZnTe thin films have been optimized in the present work. The films of thickness 300 nm and 400 nm were deposited on ITO coated glass substrates and subjected to different characterization tools like X-ray diffraction (XRD), UV‐Vis spectrophotometer, source meter and scanning electron microscopy (SEM) to investigate the structural, optical, electrical and surface morphological properties respectively. The XRD results show that the as-deposited CdZnTe thin films have zinc blende cubic structure and polycrystalline in nature with preferred orientation (111). Different structural parameters are also evaluated and discussed. The optical study reveals that the optical transition is found to be direct and energy band gap is decreased for higher thickness. The transmittance is found to increase with thickness and red shift observed which is suitable for CdZnTe films as an absorber layer in tandem solar cells. The current-voltage characteristics of deposited films show linear behavior in both forward and reverse directions as well as the conductivity is increased for higher film thickness. The SEM studies show that the as-deposited CdZnTe thin films are found to be homogeneous, uniform, small circle-shaped grains and free from crystal defects. The experimental results confirm that the film thickness plays an important role to optimize the physical properties of CdZnTe thin films for tandem solar cell applications as an absorber layer.     

Electronic properties of ultrathin films based on pyrrolofullerene molecules on the surface of oxidized silicon

Results of the investigation into the interface formation during the deposition of the films based on aziridinylphenylpyrrolofullerene (APP-C₆₀) up to 8 nm thick on the surface of the oxidized silicon substrate are presented. The procedure of detecting reflection of testing low-energy electron beam from the surface implemented in the total current spectroscopy mode with a change in the incident electron energy from 0 to 25 eV is used. The structure of maxima in the total current spectra induced by the APP-C₆₀ deposited film is established, and the character of interrelation of these maxima with π* and σ* energy bands in the studied materials is determined. It is revealed due to analyzing the variation in intensities of the total current spectra of the deposited APP-C₆₀ film and the (SiO₂)n-Si substrate that the APP-C₆₀ film is formed at the early deposition stage with the coating thickness thinner than one monolayer without the formation of the intermediate modified organic layer. As the APP-C₆₀/(SiO₂)n-Si interface is formed, the work function of the surface increases by 0.7 eV, which corresponds to the transfer of the electron density from substrate (SiO₂)n-Si toward the film APP-C₆₀. The optical absorption spectra of the APP-C₆₀ films are measured and compared with the spectra of films of unsubstituted C₆₀.     

Optical constants of thin oxide films on titanium

Thin oxide films on titanium formed by heating were studied by the ellipsometric method. To obtain the complex refractive index and film thicknesses, the ellipsometric measurements were performed by means of the immersing method: each sample was measured first in air and then in a liquid of known refractive index (in our case CCl₄). The optical constants and the oxide film thickness were computed by means of a computer from two pairs of ellipsometric values. To state the optical constants of clean titanium surface the graphic-computational method was proposed and applied. The measurements were carried out at two wavelengths on oxide films grown in air and dry oxygen by thermal oxidation at temperatures from 150 to 700 °C. It has been shown that when increasing the film thickness the refractive index of the film decreases, whereas the absorption coefficient is independent on the film thickness. Optical constants of oxide films growing in dry oxygen are smaller than those growing in air.     

室温和液氮温度Si基底C60薄膜的微观结构与光学特性比较研究

在室温和液氮温度（77K）下用蒸镀法在Si(111)衬底上制备C60薄膜，用扫描电子显微镜（SEM）研究两种不同基底上制备薄膜的微观结构，并用椭圆偏振光谱仪测量了光学参数（包括吸收光谱，折射率及光频介电常数），结果表明，衬底温度降低，薄膜更均匀，颗粒更细，光学吸收峰位置出现蓝移且在整个光频范围吸收增强。     

Low loss niobium oxides film deposited by ion beam sputter deposition

Thin films of niobium oxides are deposited by ion beam sputtering with a Kaufman-type ion source. The deposition rate is function of the oxygen partial pressure. There is an optimum oxygen pressure at 7 × 10^–5 Torr to deposite a stoichiometric film. The as-deposited films are amorphous. The optical parameters, including refractive index, extinction coefficient, and homogeneity, of the oxide films are influenced by post-baking temperature. The surface morphology measured by an atomic force microscope (AFM) shows that there is a certain range of optimum baking temperature which yields a smooth film and a good optical quality.