Separation of benzene and hexane by solvent extraction with 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ionic liquids: effect of the alkyl-substituent length

The influence of the alkyl-substituent chain in 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ionic liquids ([C(n)mim][NTf(2)], where n is the length of a linear alkyl chain) as solvents for the separation of benzene and hexane by liquid extraction was investigated. The liquid-liquid equilibrium (LLE) at 25 degrees C for the ternary systems ([C(n)mim][NTf(2)] + hexane + benzene), with n taking the values 4, 8, 10, and 12, were determined. These data were analyzed and compared to those previously reported for the system ([C(2)mim][NTf(2)] + hexane + benzene). The results show that short alkyl chains on the imidazolium cation of the ionic liquid lead to a better extractive separation of benzene and hexane, and reveal the influence of the relative degree of ordering in the ionic liquids on the extraction parameters.     

Synthesis and characterization of ionic liquids incorporating the nitrile functionality

A series of imidazolium salts with the nitrile functional group attached to the alkyl side chain, viz. [CnCNmim][X] (where CnCNmim is the 1-alkylnitrile-3-methylimidazolium cation and Cn= (CH2)(n), n = 1-4; X = Cl, PF(6), and BF(4)) and [C3CNdmim][X] (where CnCNdmim is the 1-alkylnitrile-2,3-dimethylimidazolium cation and C(n) = (CH2)(n), n = 3; X = Cl, PF(6), and BF(4)), have been prepared and characterized using spectroscopic methods. The majority of the nitrile-functionalized imidazolium salts can be classed as ionic liquids since they melt below 100 degrees C. Four of the imidazolium salts have been characterized in the solid state using single-crystal X-ray diffraction analysis to reveal an extensive series of hydrogen bonds between H atoms on the cation and the anion. The relationship between the solid-state structure and the melting point is discussed. Key physical properties (density, viscosity, and solubility in common solvents) of the low melting ionic liquid have been determined and are compared with those of the related 1-alkyl-3-methylimidazolium and 1-alkyl-2,3-dimethylimidazolium ionic liquids. It was envisaged that these ionic liquids could act as both solvent and ligand for catalyzed reactions, and this application is demonstrated in hydrogenation reactions, which show that retention of the catalyst in the ionic liquid during product extraction is extremely high.     

On the self-aggregation and fluorescence quenching aptitude of surfactant ionic liquids

The aggregation behavior in aqueous solution of a number of ionic liquids was investigated at ambient conditions by using three techniques: fluorescence, interfacial tension, and (1)H NMR spectroscopy. For the first time, the fluorescence quenching effect has been used for the determination of critical micelle concentrations. This study focuses on the following ionic liquids: [Cnmpy]Cl (1-alkyl-3-methylpyridinium chlorides) with different linear alkyl chain lengths (n=4, 10, 12, 14, 16, or 18), [C12mpip]Br (1-dodecyl-1-methylpiperidinium bromide), [C12mpy]Br (1-dodecyl-3-methylpyridinium bromide), and [C12mpyrr]Br (1-dodecyl-1-methylpyrrolidinium bromide). Both the influence of the alkyl side-chain length and the type of ring in the cation (head) on the CMC were investigated. A comparison of the self-aggregation behavior of ionic liquids based on 1-alkyl-3-methylpyridinium and 1-alkyl-3-methylpyridinium cations is provided. It was observed that 1-alkyl-3-methylpyridinium ionic liquids could be used as quenchers for some fluorescence probes (fluorophores). As a consequence, a simple and convenient method to probe early evidence of aggregate formation was established.     

Synthesis of methyl orange using ionic liquids

Two ionic liquids were synthesized, each system consisting of the 1-hexyl-3-methylimidazolium ion ([hmim]⁺) as the cation and either hexafluorophosphate ([PF₆]⁻), or perchlorate ([ClO₄]⁻) as the anions. This study involves the synthesis of methyl orange (4-[[(4-dimethylamino)phenyl]-azo] benzene sulfonic acid sodium salt) using the ionic liquids as replacement solvents for the reaction. The advantage of using ionic liquids as substitutes for organic solvents includes: recyclable/reclaimable solvents, stabilization of intermediates and higher product yields. The 1-hexyl-3-methylimidazolium derivatives can be used for syntheses conducted at low temperatures and are less toxic than typical organic solvents.     

[EPy][BF4]和[EPy][PF6]离子对的气相及液相阴阳离子相互作用研究

采用从头算HF/6-31G和密度泛函理论B3LYP/6-31+G(d,p)方法, 对乙基吡啶四氟硼酸盐([EPy][BF4])和乙基吡啶六氟磷酸盐([EPy][PF6])的离子对进行了结构优化和频率分析, 并利用自洽反应场(SCRF)的导体极化连续模型(CPCM)考察了离子对液态下的结构及相互作用, 得到了两种离子对的红外光谱及气相、液相下最稳定结构. 由两种离子对的几何参数可知, 阴阳离子通过氢键相互作用, 两种离子液体的红外光谱特征值与实验值比较吻合. 应用自然键轨道(NBO)理论分析了吡啶阳离子及离子对中的原子电荷分布和电荷转移情况, 结果表明两种离子对中阴阳离子间存在静电相互作用和氢键作用. 通过几何参数、相互作用能及NBO分析研究发现, 液相下由于周围电荷的中和作用, 离子对中阴阳离子的相互作用明显降低.     

Stereoselective synthesis of analogs of natural isoprenoids based on the reaction of alkyl 4-dialkoxyphosphoryl-3-methylbut-2-enoates with aldehydes in ionic liquids and in an imidazolium salt—benzene system

Condensation of alkyl 4-dialkoxyphosphoryl-3-methylbut-2-enoates with a number of aldehydes under the Horner—Emmons reaction conditions in 1-butyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate and in 1-butyl-3-methylimidazolium bromide—benzene and 1-butyl-2,3-dimethylimidazolium hexafluorophosphate—benzene systems was studied. The E/Z-stereoisomer ratio of the olefination products for the reaction carried out in ionic liquids was 3 : 1, which corresponds to the values attained previously in the KOH—benzene—Bu₄ ⁿNBr (cat.) system. Quantum-chemical calculations were used to determine the averaged radii (r ₀) of the [Bu₄ ⁿN] and substituted imidazolium cations by means of the Gaussian 98 program package. The stereoselectivity of olefination in the KOH—PhH—phase-transfer catalyst system decreases with a decrease in the r ₀ value for the catalyst cation. The possibility of recovery and reuse of ionic liquids is demonstrated.     

The vapour of imidazolium-based ionic liquids: a mass spectrometry study

Eight common dialkylimidazolium-based ionic liquids have been successfully evaporated in ultra-high vacuum and their vapours analysed by line of sight mass spectrometry using electron ionisation. The ionic liquids investigated were 1-alkyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]imide, [C(n)C(1)Im][Tf(2)N] (where n = 2, 4, 6, 8), 1-alkyl-3-methylimidazolium tetrafluoroborate, [C(n)C(1)Im][BF(4)] (where n = 4, 8), 1-butyl-3-methylimidazolium octylsulfate, [C(4)C(1)Im][C(8)OSO(3)] and 1-butyl-3-methylimidazolium tetrachloroferrate, [C(4)C(1)Im][FeCl(4)]. All ionic liquids studied here evaporated as neutral ion pairs; no evidence of decomposition products in the vapour phase were observed. Key fragment cations of the ionised vapour of the ionic liquids are identified. The appearance energies, E(app), of the parent cation were measured and used to estimate the ionisation energies, E(i), for the vapour phase neutral ion pairs. Measured ionisation energies ranged from 10.5 eV to 13.0 eV. Using both the identity and E(app) values, the fragmentation pathways for a number of fragment cations are postulated. It will be shown that the enthalpy of vaporisation, Δ(vap)H, can successfully be measured using more than one fragment cation, although caution is required as many fragment cations can also be formed by ionisation of decomposition products.     

Thermochemistry of imidazolium-based ionic liquids: experiment and first-principles calculations

In this work the molar enthalpy of formation of the ionic liquid 1-ethyl-3-methylimidazolium dicyanoamide in the gaseous phase [C(2)MIM][N(CN)(2)] was measured by means of combustion calorimetry and enthalpy of vaporization using transpiration. Available, but scarce, primary experimental results on enthalpies of formation of imidazolium based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)] and [NTf(2)] were collected and checked for consistency using a group additivity procedure. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids with the common cation [C(n)MIM] (where n = 2 and 4) and with the anions [N(CN)(2)], [NO(3)], [NTf(2)], [Cl], [BF(4)] and [PF(6)] have been performed using the G3MP2 theory. It has been established that the gaseous phase enthalpies of formation of these ionic liquids obey the group additivity rules.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

电极/离子液体界面电容

用电化学阻抗方法研究了铂片电极在BMIMPF6,BMIMBF4,BMIMClO4,BMIMTf2N,BMIMCl,BMIMBr,C3OHMIMBF4,C3OHMIMClO4和BMMIMPF6(BMIM:1-butyl-3-methylimidazolium;C3OHMIM:1-(3-hydroxypropyl)-3-methylimidazolium;BMMIM:1-butyl-2-methyl-3-methylimidazolium;Tf2N:bis(trifluoromethylsulfonyl)amide)等离子液体中的界面电容及结构.结果表明:当阴、阳离子半径相差不大且不存在特性吸附时,在零电荷电势附近,电极/离子液体界面的电容-电势曲线将出现电容单峰或者双峰.电极的零电荷电势对应于单峰的峰电势或者双峰之间的谷电势.当电极电势远离零电荷电势时,电极/离子液体界面成紧密层结构,可由紧密层理论来描述.如果存在离子的特性吸附,相应的电容峰可能不再出现,而表现为双层电容随电极电势对零电荷电势的偏离而单调增加.还研究了添加小的Li+离子对电极/离子液体界面电容的影响.通过向BMIMTf2N中加入LiTf2N,发现Li+离子可以改变电极/离子液体界面的双层结构,但无助于界面电容的提高,甚至可能引起电容的降低.最后探讨了不同条件下,尤其考虑阴阳离子特性吸附时,电极/离子液体的界面结构.     

Liquid-liquid interfacial tension of equilibrated mixtures of ionic liquids and hydrocarbons

Ionic liquids are possible alternative solvents for the separation of aromatic and aliphatic hydrocarbons by liquid-liquid extrac- tion. Interfacial tension is an important property to consider in the design of liquid-liquid extraction processes. In this work, the liquid-liquid interfacial tension and the mutual solubility at 25 °C have been measured for a series of biphasic, equilibrated mixtures of an ionic liquid and a hydrocarbon. In particular, the ionic liquids 1-alkyl-3-methylimidazolium bis(trifluorome- thanesulfonyl)imide (with the alkyl substituent being ethyl, hexyl or decyl), 1-ethyl-3-methylimidazolium ethylsulfate, and 1-ethyl-3-methylimidazolium methanesulfonate have been selected, as well as the hydrocarbons benzene, hexane, ethylben- zene, and octane. The selected sets of ionic liquids and hydrocarbons allow the analysis of the influence of a series of effects on the interfacial tension. For example, the interfacial tension decreases with an increase in the length of the alkyl substituent chain of the cation or with an increase of the degree of charge delocalisation in the anion of the ionic liquid. Also, the interfa- cial tension with the aromatic hydrocarbons is markedly lower than that with the aliphatic hydrocarbons. A smaller effect is caused by variation of the size of the hydrocarbon. Some of the observed trends can be explained from the mutual solubility of the hydrocarbon and the ionic liquid.     

Application of mutually immiscible ionic liquids to the separation of aromatic and aliphatic hydrocarbons by liquid extraction: a preliminary approach

The recently discovered class of ionic liquids--mutually immiscible ionic liquids--are explored in this work for their first practical application: the separation of aromatic and aliphatic hydrocarbons by solvent extraction. For this preliminary approach, benzene and hexane were chosen as representatives of each group of hydrocarbons; the ionic liquids 1-ethyl-3-methylimidazolium bis( (trifluoromethyl)sulfonyl)amide and trihexyl(tetradecyl)phosphonium bis( (trifluoromethyl)sulfonyl)amide, which are both liquid at room temperature and hydrophobic, were selected as potential solvents. Liquid-liquid equilibrium experiments were carried out at 25 degrees C for the quaternary system formed by the two hydrocarbons and the two ionic liquids. Typical extraction parameters were calculated and analysed in order to evaluate the possibilities of the mutual immiscible ionic liquids in accomplishing the separation target. A comparison with the case of using just one of the ionic liquids was made.     

Relative volatilities of ionic liquids by vacuum distillation of mixtures

The relative volatilities of a variety of common ionic liquids have been determined for the first time. Equimolar mixtures of ionic liquids were vacuum-distilled in a glass sublimation apparatus at approximately 473 K. The composition of the initial distillate, determined by NMR spectroscopy, was used to establish the relative volatility of each ionic liquid in the mixture. The effect of alkyl chain length was studied by distilling mixtures of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids, or mixtures of N-alkyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids, with different alkyl chain lengths. For both classes of salts, the volatility is highest when the alkyl side chain is a butyl group. The effect of cation structure on volatility has been determined by distilling mixtures containing different types of cations. Generally speaking, ionic liquids based on imidazolium and pyridinium cations are more volatile than ionic liquids based on ammonium and pyrrolidinium cations, regardless of the types of counterions present. Similarly, ionic liquids based on the anions [(C2F5SO2)2N](-), [(C4F9SO2)(CF3SO2)N](-) , and [(CF3SO2)2N](-) are more volatile than ionic liquids based on [(CF3SO2)3C](-) and [CF3SO3](-), and are much more volatile than ionic liquids based on [PF6](-).     

Studies of structural, dynamical, and interfacial properties of 1-alkyl-3-methylimidazolium iodide ionic liquids by molecular dynamics simulation

Bulk and surface properties of the ionic liquids 1-alkyl-3-methyl-imidazolium iodides ([C(n)mim]I) were simulated by classical molecular dynamics using all atom non-polarizable force field (n = 4, butyl; 6, hexyl; 8, octyl). The structure of ionic liquids were initially optimized by density functional theory and atomic charges obtained by CHELPG method. Reduction of partial atomic charges (by 20% for simulation of density and surface tension, and by 10% for viscosity) found to improve the accuracy, while a non-polarizable force field was applied. Additionally, the simulation ensembles approach the equilibrium faster when the charge reduction is applied. By these refined force field parameters, simulated surface tensions in the range of 323-393 k are quite in agreement with the experiments. Simulation of temperature dependent surface tension of [C(4)mim]I well beyond room temperature (up to 700 K) permits prediction of the critical temperature in agreement with that predicted from experimental surface tension data. Simulated densities in the range of 298-450 K for the three ionic liquids are within 0.8% of the experimental data. Structural properties for [C(4)mim]I were found to be in agreement with the results of Car-Parrinello molecular dynamics simulation we performed, which indicates a rather well-structured cation-anion interaction and occurs essentially through the imidazolium ring cation. Diffusion coefficient changes with alkyl chain length in the order of [C(8)mim]I > [C(6)mim]I > [C(4)mim]I for the cation and the anion. Formation of a dense domain in subsurface region is quite evident, and progressively becomes denser as the alkyl chain length increases. Bivariate orientational analysis was used to determine the average orientation of molecule in ionic liquids surface, subsurface, and bulk regions. Dynamic bisector-wise and side-wise movement of the imodazolium ring cation in the surface region can be deduced from the bivariate maps. Atom-atom density profile and bivariate analysis indicate that the imidazolium cation takes a spoon like configuration in the surface region and the tilt of alkyl group is a function length of alkyl chain exposing as linear as possible to the vapor phase.     

Surface tension of binary mixtures of imidazolium and ammonium based ionic liquids with alcohols, or water: cation, anion effect

The surface tensions were measured at atmospheric pressure, with use of a ring tensiometer, of a series of alcoholic solutions of closely related ionic liquids: 1-methyl-3-methylimidazolium methylsulfate, [MMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium methylsulfate, [BMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium octylsulfate, [BMIM][OcSO4] in alcohol (methanol, or 1-butanol at 298.15 K) and of 1-hexyloxymethyl-3-methylimidazolium tetrafluoroborate, [C6H(13)OCH2MIM][BF4], 1,3-dihexyloxymethylimidazolium tetrafluoroborate, [(C6H13OCH2)2IM][BF4] in alcohol (methanol, or 1-butanol, or 1-hexanol at 308.15 and 318.5 K) and hexyl(2-hydroxyethyl)dimethylammonium bromide, C6Br in 1-octanol at 298.15 K. The set of ammonium ionic liquids of different cations and anions (C2Br, C2BF4, C2PF6, C2N(CN)2, C3Br, C4Br and C6Br) was chosen to show the influence of small amount of the ammonium ionic liquid on the surface tension of water at 298.15 K. The influence of the cation, or anion alkyl chain length on the properties under study (densities and surface tension) was tested.     

Ionic liquid induced spontaneous symmetry breaking: emergence of predominant handedness during the self-assembly of tetrakis(4-sulfonatophenyl)porphyrin (TPPS) with achiral ionic liquid

The self-assembly and supramolecular chirality of a dianionic tetrakis(4-sulfonatophenyl) porphyrin (TPPS) in the presence of ionic liquids, 1-alkyl-3-methylimidazolium tetrafluoroborate (alkyl = C(2), C(4) or C(6), abbreviated as C(2)mimBF(4), C(4)mimBF(4) and C(6)mimBF(4), respectively), have been investigated. It has been confirmed that mimBF(4) ionic liquids significantly promoted the J-aggregation of TPPS and the alkyl chain length in the imidazolium cation was closely related to the TPPS aggregation, the inducing ability of which decreased in the order of C(2), C(4) or C(6) in side chain. Interestingly, the formed TPPS assemblies with the ionic liquids showed supramolecular chirality although both TPPS and ionic liquids are achiral. It was found that the supramolecular chirality of the TPPS/IL system always appeared after the formation of the J aggregate. The dynamic process of the emergence of the handedness in the initial achiral system was monitored by the time-dependent CD spectra. A mechanism for the transformation of the conventional J-aggregate to the chiral J-aggregate was proposed. The work will lead to a deeper understanding of the chiral symmetry breaking in the supramolecular system.     

Biased spectroscopic protein quantification in the presence of ionic liquids

Owing to their unique physicochemical properties, ionic liquids have gained much recognition as solvents or co-solvents in a wide variety of biochemical applications. In the context of protein analytics, four similar 1-alkyl-3-methylimidazolium-based ionic liquids have been analysed for their applicability as co-solvents. Spectroscopic bovine serum albumin (BSA) quantification experiments in the presence of ionic liquids were performed and for two ionic liquids a concentration-dependent effect has been found that can lead to biased protein quantification. It could be shown that the biased spectroscopic analysis of the tested ionic liquids is dependent on the length of the alkyl side chain (>C₄) of the 1-alkyl-3-methylimidazolium-based cation, and the chaotropicity of the anion. Once accounted for and properly calibrated when using spectroscopic methods, these effects can be avoided thus facilitating correct protein quantification in the presence of ionic liquids.     

Benzene Solubility in Ionic Liquids: Working Toward an Understanding of Liquid Clathrate Formation

The solubility of benzene in 15 imidazolium, pyrrolidinium, pyridinium, and piperidinium ionic liquids has been determined; the resulting, benzene‐saturated ionic liquid solutions, also known as liquid clathrates, were examined with ¹H and ¹⁹F nuclear magnetic resonance spectroscopy to try and understand the molecular interactions that control liquid clathrate formation. The results suggest that benzene interacts primarily with the cation of the ionic liquid, and that liquid clathrate formation (and benzene solubility) is controlled by the strength of the cation–anion interactions, that is, the stronger the cation–anion interaction, the lower the benzene solubility. Other factors that were determined to be important in the final amount of benzene in any given liquid clathrate phase included attractive interactions between the anion and benzene (when significant), and larger steric or free volume demands of the ions, both of which lead to greater benzene solubility.     

Synthesis,Characterization, Thermal Analyses,and Spectroscopic Properties of Novel Naphthyl-Functionalized Imidazolium Ionic Liquids

A series of novel ionic liquids based on naphthyl-functionalized imidazolium cation have been prepared. Their structure was characterized by NMR. The thermal stabilities of the prepared liquids were studied by thermal gravimetric analysis. The new ionic liquids containing NTf^-₂ anion display significantly higher thermal stabilities (>400°C). Anion exchange to PF^-₆, BF^-₄, and Br^– decreases the thermal stabilities of such ionic liquids. Fluorescence and UV–Vis absorption spectroscopy were used to study the spectroscopic properties of the ionic liquids. Compared with common ionic liquids, the described ionic liquids provide robust fluorescence properties and remarkably increased UV–Vis absorption. This research may enrich the field of functionalized ionic liquids and provide a platform for extension of ionic liquid applications.     

功能化苯并咪唑类离子液体的合成及性质

合成了一系列由磺酸基、 羧基修饰的新型功能化苯并咪唑类离子液体, 采用IR, ¹H NMR, ¹³C NMR和ESI-MS对其结构进行了表征, 研究了化合物的热稳定性、 电导率以及室温下在各种溶剂中的溶解性等性质. 结果表明, 该类离子液体在 280 ℃以下基本没有失重, 热稳定性较好; 在水溶液浓度为1×10^-3 mol/L时, 随着温度的升高, 电导率几乎与温度呈正比增大; 能与大多数有机溶剂互溶, 溶解性随着溶剂极性的增加而增大.