电晕放电引发丙烯酸表面接枝LDPE薄膜的研究

本文采用接枝量测定、ATRIR和ESCA研究了电晕放电引发丙烯酸表面接枝LDPE薄膜,实验结果表明:电晕放电能有效地引发丙烯酸在LDPE薄膜表面的接枝聚合反应,随反应时间延长、反应温度提高和丙烯酸单体浓度增大,表面接枝量增大。当丙烯酸浓度为20%、聚合温度为70℃、反应15小时时,经电晕放电处理72秒后的LDPE薄膜表面接枝量高达22055μgcm2。     

苯乙烯在炭黑表面的阴离子接枝聚合研究

利用正丁基锂（ｎ－ＢｕＬｉ）与炭黑（ＣＢ）表面含氧基团反应制得了表面含－ＯＬｉ基团的反应型炭黑，以该炭黑与聚氧乙烯－聚氧丙烯－聚苯乙烯（ＰＥＯ－ＰＰＯ－ＰＳ）多嵌段聚合物组成的阴离子引发体系作活性中心，研究了苯乙烯在炭黑表面的阴离子接枝聚合。ＦＴ－ＩＲ，ＴＥＭ和ＤＳＣ分析表明在接枝炭黑表面存在苯乙烯的聚合物。接枝炭黑在甲苯中有良好的分散稳定性。     

GMA熔融接枝EPDM的研究

以甲基丙烯酸缩水甘油酯（ＧＭＡ）为接枝单体，过氧化二异丙苯（ＤＣＰ）为引发剂，对三元乙丙胶（ＥＰＤＭ）进行了熔融接枝，在烃链上引入极性基团，以改善ＥＰＤＭ与极性聚合物的相容性。用差示扫描量热计（ＤＳＣ）研究了ＧＭＡ的聚合温度，用富里叶红外（ＦＴ－ＩＲ）、凝胶渗透色谱（ＧＰＣ）对接枝产物进行了表征。实验结果表明，产物的接枝率和凝胶量可以通过反应条件（温度、时间、反应物组成及加料方式）来控制。     

聚氯乙烯-g-聚甲基丙烯酸-2-羟乙酯共聚物的合成和表征

聚氯乙烯 (ＰＶＣ)是常用医用高分子材料之一 ,可以制作储血袋、导液管、人工尿道等 .ＰＶＣ亲水性差 ,影响其生物相容性 .采用亲水性单体与ＰＶＣ接枝共聚是提高ＰＶＣ亲水性的重要方法[1] .Ｋｒｉｓｈｎａｎ等[2 ] 对Ｃｏ60 辐照下ＰＶＣ接枝Ｎ 乙烯基吡咯烷酮进行了研究 .Ｓｉｎｇｈ等[3～ 5] 采用辐照引发甲基丙烯酸在ＰＶＣ薄膜的接枝反应 ,对接枝动力学、接枝后薄膜表面形态、溶胀和抗凝血性等进行了研究 .Ｇｏｌｄｂｅｒｇ等[6] 采用辐照引发甲基丙烯酸2 羟乙酯 (ＨＥＭＡ)在ＰＶＣ薄膜上的接枝 .Ｌｅｅ等[7]采用溶液接枝共聚制备了…     

表面波技术研究TBP对C12E8表面流变性质的影响

利用表面波技术研究消泡剂ＴＢＰ对起泡剂Ｃ１３Ｅ８表面流变性质的影响,阐述泡沫的排液过程中液膜变形所产生的表面张力梯度修复机理以及液膜强度与表面彭胀模量、表面膨胀弹性和表面膨胀粘度的,探讨了消泡剂ＴＢＰ的消泡机理。实验结果表明,当包剂Ｃ１２Ｅ８浓度泪地ｃｍｃ时,ＴＢＰ能大幅芳地降低Ｃ１２Ｅ８的表面膨胀模量、表面膨胀弹性表面膨胀粘度,其中对表面膨胀性的影响大于对表面膨用粘度的影响,并且增加了Ｃ１２Ｅ１     

乙烯基单体在炭黑表面上的接枝聚合

讨论了分别在铈离子体系，正丁基锂体系，过渡金属离子乙酰丙酮铜（Ⅱ）以及焦磷酸络锰（Ⅲ）体系的作用下，炭黑与乙烯基单体的接枝聚合．研究了引发剂浓度、单体浓度、反应时间对接枝聚合反应的影响．利用ＦＴ ＩＲ分析确证了炭黑表面的接枝反应，利用ＴＥＭ表征了接枝炭黑的形态．结果表明，在所研究的多种炭黑表面接枝聚合体系中，正丁基锂体系的接枝率最高，可达２００％．而各种氧化还原体素的接枝率只能达到３０％左右．表面接枝后的炭黑在介质中的分散稳定性明显改善．     

聚丙烯微孔膜表面的等离子体接枝

通过氢气氛等离子体处理，在聚丙烯微孔膜表面接枝了聚丙烯酸，改善了膜表面的亲水性。接枝率与等离子体放电功率、放电时间和溶液浓度有关，微孔膜内外表面及不同位置接枝效率有差别。接枝后微也膜的表面孔径减少了。     

辉光放电等离子体对聚丙烯纤维的表面改性

在对电晕、介质阻挡放电、γ射线辐射接枝对化纤改性的简要介绍基础上，重点论述了辉光放电等离子体对聚丙烯纤维的改性。并按等离子体技术的发展过程，对低压和常压辉光放电等离子体对聚丙烯纤维与织物改性的特点、原理及发展前景进行了扼要综述，指出常压辉光放电等离子体是一种很有潜力的表面改性技术。     

樟脑酮/过氧化物复合体系引发丙烯酸酯可见光聚合反应

采用差热扫描方法（ＤＳＣ）研究了樟脑酮（ＣＱ）／过氧化物（ＰＯ）复合体系引发三缩乙二醇双甲基丙烯酸酯（ＴＥＧＤＭ）的可见光聚合．与ＣＱ单一引发体系相比,ＣＱ和ＰＯ组成的复合体系更为有效．实验结果指出,加入过氧化物,如ＤＣＰＯ和ＤＢＰＯ,使聚合速率显著增加,最大速率到达时间明显缩短,然而它们对应的过氧化氢化合物,如ＴＢＨＰ、ＣＭＨＰ却效果不佳,复合体系的增效作用表明,激发态ＣＱ通过能量传递机制,使过氧化物发生有效的光解生成活性自由基,同时发现在含氧的条件下聚合反应速率得到增加．     

PET碳氟等离子体处理的表面动力学的研究（Ⅱ）：Wilhelmy吊片法…

通过Ｗｉｌｈｅｌｍｙ吊片研究了ＣＦ４／ＣＨ４混合气体等离子体处理的ＰＥＴ浸水表面的动态行为。结果表明，处理后的ＰＥＴ浸水后表面憎水性下降，这是幅地表面含氟基团向体相的高速翻转及含氟链段向相缓慢迁移的缘故。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.