Colorimetric method for determination of bisphenol A based on aptamer-mediated aggregation of positively charged gold nanoparticles

A sensitive, specific and rapid colorimetric aptasensor for the determination of the plasticizer bisphenol A (BPA) was developed. It is based on the use of gold nanoparticles (AuNPs) that are positively charged due to the modification with cysteamine which is cationic at near-neutral pH values. If aptamers are added to such AuNPs, aggregation occurs due to electrostatic interactions between the negatively-charged aptamers and the positively-charged AuNPs. This results in a color change of the AuNPs from red to blue. If a sample containing BPA is added to the anti-BPA aptamers, the anti-BPA aptamers undergo folding via an induced-fit binding mechanism. This is accompanied by a conformational change, which prevents the aptamer-induced aggregation and color change of AuNPs. The effect was exploited to design a colorimetric assay for BPA. Under optimum conditions, the absorbance ratio of A ₅₂₇/A ₆₈₀ is linearly proportional to the BPA concentration in the range from 35 to 140 ng∙mL⁻¹, with a detection limit of 0.11 ng∙mL⁻¹. The method has been successfully applied to the determination of BPA in spiked tap water and gave recoveries between 91 and 106 %. Data were in full accordance with results obtained from HPLC. This assay is selective, easily performed, and in our perception represents a promising alternative to existing methods for rapid quantification of BPA.

The negatively-charged anti-BPA aptamers can absorb onto the positively-charged cysteamine-capped AuNPs (cysteamine-AuNPs) via electrostatic interactions, which can cause the aggregation of AuNPs accompanied by a red-to-blue color change. In the presence of BPA, the specific binding of BPA to the aptamers induces the conformation changes of anti-BPA aptamers, which can release the aptamers from cysteamine-AuNPs and thus prevent the aggregation and color change of cysteamine-AuNPs.

     

Aptamers-based sandwich assay for silver-enhanced fluorescence multiplex detection

In this work, aptamers-modified silver nanoparticles (AgNPs) were prepared as capture substrate, and fluorescent dyes-modified aptamers were synthesized as detection probes. The sandwich assay was based on dual aptamers, which was aimed to accomplish the highly sensitive detection of single protein and multiplex detection of proteins on one-spot. We found that aptamers-modified AgNPs based microarray was much superior to the aptamer based microarray in fluorescence detection of proteins. The result shows that the detection limit of the sandwich assay using AgNPs probes for thrombin or platelet-derived growth factor-BB (PDGF-BB) is 80 or 8 times lower than that of aptamers used directly. For multiplex detection of proteins, the detection limit was 625 pM for PDGF-BB and 21 pM for thrombin respectively. The sandwich assay based on dual aptamers and AgNPs was sensitive and specific.     

Characterization of troponin T binding aptamers for an innovative enzyme-linked oligonucleotide assay (ELONA)

Early diagnosis of acute myocardial infarction (AMI) is of outmost importance to reduce the mortality rate, and cardiac troponins are considered the gold standard biomarkers of myocardial necrosis. In this scenario, the characterization of two troponin T (TnT)-binding aptamers as viable alternative to antibodies employed on clinical immunoassays is here reported for the first time. Their recognition ability was first investigated through surface plasmon resonance (SPR). Subsequently, an enzyme-linked oligonucleotide assay (ELONA) was developed on common 96-well polystyrene plates, both by direct and sandwich detection strategies for comparison. In both cases, the assay exhibits a detection ability of TnT in the range of low nanomolar but a great advantage on serum interference was obtained by using both aptamers in a sandwich format, with excellent reproducibility and recovery values. Despite the sensitivity needing to be enhanced to the low picomolar range, these results are encouraging for the development of new, low-cost, and rapid antibody-free colorimetric assays for AMI studies based on aptamer–Troponin T recognition.

     

Highly Specific Recognition of Guanosine Using Engineered Base-Excised Aptamers

Purines and their derivatives are highly important molecules in biology for nucleic acid synthesis, energy storage, and signaling. Although many DNA aptamers have been obtained for binding adenine derivatives such as adenosine, adenosine monophosphate, and adenosine triphosphate, success for the specific binding of guanosine has been limited. Instead of performing new aptamer selections, we report herein a base-excision strategy to engineer existing aptamers to bind guanosine. Both a Na⁺-binding aptamer and the classical adenosine aptamer have been manipulated as base-excising scaffolds. A total of seven guanosine aptamers were designed, of which the G16-deleted Na⁺ aptamer showed the highest bindng specificity and affinity for guanosine with an apparent dissociation constant of 0.78 mm . Single monophosphate difference in the target molecule was also recognizable. The generality of both the aptamer scaffold and excised site were systematically studied. Overall, this work provides a few guanosine binding aptamers by using a non-SELEX method. It also provides deeper insights into the engineering of aptamers for molecular recognition.     

Study on an electrochemical biosensor for thrombin recognition based on aptamers and nano particles

This paper presents a high specific, sensitive electrochemical biosensor for recognition of protein such as thrombin based on aptamers and nano particles. Two different aptamers were chosen to construct a sandwich manner for detecting thrombin. Aptamer I was immobilized on nano magnetic particle for capturing thrombin, and aptamer II labled with nano gold was used for detection. The electrical current generated from gold after the formation of the complex of magnetic particle, thrombin and nano gold, and then an electrochemical cell designed by ourselves was used for separating, gathering, and electrochemical detecting. Through magnetic separation, high specific and sensitive detection of the target protein, thrombin, was achieved. Linear response was observed over the range 5.6×10-12―1.12×10-9 mol/L, with a detection limit of 1.42×10-12 mol/L. The presence of other protein as BSA did not affect the detection, which indicates that high selective recognition of thrombin can be achieved in complex biological samples such as human plasma.     

Aptamer based strategy for cytosensing and evaluation of HER-3 on the surface of MCF-7 cells by using the signal amplification of nucleic acid-functionalized nanocrystals

The electrochemical detection of cell lines of MCF-7 (human breast cancer) has been reported, using magnetic beads for the separation tool and high-affinity DNA aptamers for signal recognition. The high specificity was obtained by using the magnetic beads and aptamers, and the good sensitivity was realized with the signal amplification of DNA capped CdS or PbS nanocrystals. The ASV (anodic stripping voltammetry) technology was employed for the detection of cadmic cation and lead ions, for electrochemical assay of the amount of the target cells and biomarkers on the membrane of target cells, respectively. This electrochemical method could respond to as low as 100 cells mL⁻¹ of cancer cells with a linear calibration range from 1.0 × 10² to 1.0 × 10⁶ cells mL⁻¹, showing very high sensitivity. Moreover, the amounts of HER-3 which were overexpressed on MCF-7 cells were calculated correspond to be 3.56 × 10⁴ anti-HER-3 antibody molecules. In addition, the assay was able to differentiate between different types of target and control cells based on the aptamers and magnetic beads used in the assay, indicating the wide applicability of the assay for early and accurate diagnose of cancers.     

Multiparameter Particle Display (MPPD): A Quantitative Screening Method for the Discovery of Highly Specific Aptamers

Aptamers are a promising class of affinity reagents because they are chemically synthesized, thus making them highly reproducible and distributable as sequence information rather than a physical entity. Although many high‐quality aptamers have been previously reported, it is difficult to routinely generate aptamers that possess both high affinity and specificity. One of the reasons is that conventional aptamer selection can only be performed either for affinity (positive selection) or for specificity (negative selection), but not both simultaneously. In this work, we harness the capacity of fluorescence activated cell sorting (FACS) for multicolor sorting to simultaneously screen for affinity and specificity at a throughput of 10⁷ aptamers per hour. As a proof of principle, we generated DNA aptamers that exhibit picomolar to low nanomolar affinity in human serum for three diverse proteins, and show that these aptamers are capable of outperforming high‐quality monoclonal antibodies in a standard ELISA detection assay.     

Aptamer sandwich assays: label-free and fluorescence investigations of heterogeneous binding events

We studied aptamer binding events in a heterogeneous format using label-free and fluorescence measurements for the purpose of developing an aptamer-based sandwich assay on a standard microtiter plate platform. The approach allowed visualization of the underlying aptamer immobilization and target binding events rather than relying on only an endpoint determination for method optimization. This allowed for a better understanding of these multi-step assays and optimal conditions specific to aptamers. α-thrombin was chosen as a prototypical analyte as two well-studied aptamers (15 and 29-mer) binding distinct epitopes are available. The Corning Epic? system, which utilizes a resonance waveguide diffraction grating in a 384-well microtiter plate format, was employed to measure relative immobilization and binding levels for various modified aptamers. Parameters investigated included the effects of aptamer orientation, label orientation, spacer length, spacer type, immobilization concentration, and binding buffer. Most notably, the 15-mer aptamer was preferable for capture over the 29-mer aptamer and aptamers with increasing poly(dT) spacer length between the biotin modification and the aptamer yielded decreased immobilization levels. This decreased immobilization resulted in increased α-thrombin binding ability for 15-mer aptamers with the poly(dT) spacer. Fluorescence measurements of fluorescein-labeled 29-mer aptamers with varying spacers were used to visualize sandwich complex formation. Using both label-free and traditional fluorescence measurements, an in-depth understanding of the overall assay was obtained, thus the inclusion of label-free measurements is recommended for future method development.     

Surface plasmon resonance imaging for affinity analysis of aptamer–protein interactions with PDMS microfluidic chips

We report on the use of PDMS multichannels for affinity studies of DNA aptamer–human Immunoglobulin E (IgE) interactions by surface plasmon resonance imaging (SPRi). The sensing surface was prepared with thiol-terminated aptamers through a self-assembling process in the PDMS channels defined on a gold substrate. Cysteamine was codeposited with the thiol aptamers to promote proper spatial arrangement of the aptamers and thus maintain their optimal binding efficiencies. Four aptamers with different nucleic acid sequences were studied to test their interaction affinity toward IgE, and the results confirmed that aptamer I (5′-SH-GGG GCA CGT TTA TCC GTC CCT CCT AGT GGC GTG CCC C-3′) has the strongest binding affinity. Control experiments were conducted with a PEG-functionalized surface and IgG was used to replace IgE in order to verify the selective binding of aptamer I to the IgE molecules. A linear concentration-dependent relationship between IgE and aptamer I was obtained, and a 2-nM detection limit was achieved. SPRi data were further analyzed by global fitting, and the dissociation constant of aptamer I–IgE complex was found to be 2.7 × 10⁻⁷ M, which agrees relatively well with the values reported in the literature. Aptamer affinity screening by SPR imaging demonstrates marked advantages over competing methods because it does not require labeling, can be used in real-time, and is potentially high-throughput. The ability to provide both qualitative and quantitative results on a multichannel chip further establishes SPRi as a powerful tool for the study of biological interactions in a multiplexed format. Figure The SPRi sensograms and thier global fits for aptamer I and IgE interactions. Insert in the difference image obtained with the PDMS microchannel flow cell for aptamer IV, III, and I (from left to right     

Visual detection of cancer cells by colorimetric aptasensor based on aggregation of gold nanoparticles induced by DNA hybridization

A simple but highly sensitive colorimetric method was developed to detect cancer cells based on aptamer–cell interaction. Cancer cells were able to capture nucleolin aptamers (AS 1411) through affinity interaction between AS 1411 and nucleolin receptors that are over expressed in cancer cells, The specific binding of AS 1411 to the target cells triggered the removal of aptamers from the solution. Therefore no aptamer remained in the solution to hybridize with complementary ssDNA-AuNP probes as a result the solution color is red. In the absence of target cells or the presence of normal cells, ssDNA-AuNP probes and aptamers were coexisted in solution and the aptamers assembled DNA-AuNPs, produced a purple solution. UV–vis spectrometry demonstrated that this hybridization-based method exhibited selective colorimetric responses to the presence or absence of target cells, which is detectable with naked eye. The linear response for MCF-7 cells in a concentration range from 10 to 10⁵ cells was obtained with a detection limit of 10 cells. The proposed method could be extended to detect other cells and showed potential applications in cancer cell detection and early cancer diagnosis.     

Insulin-binding aptamer-conjugated graphene oxide for insulin detection

This paper describes a simple and sensitive aptamer/graphene oxide (GO) based assay for insulin detection. GO can protect DNA from nuclease cleavage, but aptamers can be detached from the GO surface by specific target binding. This exposes the aptamers to enzymatic cleavage and releases the target for a new cycle. Cycling of targets leads to significant signal amplification and low LOD.     

Electrochemical and Electrochemiluminescence Determination of Cancer Cells Based on Aptamers and Magnetic Beads

The electrochemical and electrochemiluminescence (ECL) detection of cell lines of Burkitt’s lymphoma (Ramos) by using magnetic beads as the separation tool and high‐affinity DNA aptamers for signal recognition is reported. Au nanoparticles (NPs) bifunctionalized with aptamers and CdS NPs were used for electrochemical signal amplification. The anodic stripping voltammetry technology employed for the analysis of cadmium ions dissolved from CdS NPs on the aggregates provided a means to quantify the amount of the target cells. This electrochemical method could respond down to 67 cancer cells per mL with a linear calibration range from 1.0×10² to 1.0×10⁵ cells mL^?1, which shows very high sensitivity. In addition, the assay was able to differentiate between target and control cells based on the aptamer used in the assay, indicating the wide applicability of the assay for diseased cell detection. ECL detection was also performed by functionalizing the signal DNA, which was complementary to the aptamer of the Ramos cells, with tris(2,2‐bipyridyl) ruthenium. The ECL intensity of the signal DNA, replaced by the target cells from the ECL probes, directly reflected the quantity of the amount of the cells. With the use of the developed ECL probe, a limit of detection as low as 89 Ramos cells per mL could be achieved. The proposed methods based on electrochemical and ECL should have wide applications in the diagnosis of cancers due to their high sensitivity, simplicity, and low cost.     

Disposable screen-printed chemiluminescent biochips for the simultaneous determination of four point-of-care relevant proteins

A screen-printed (SP) microarray is presented as a platform for the achievement of multiparametric biochips. The SP platform is composed of eight (0.28-mm²) working electrodes modified with electroaddressed protein A-aryl diazonium adducts. The electrode surfaces are then used as an affinity immobilisation support for the orientated binding of capture monoclonal antibodies, having specificity against four different point-of-care related proteins (myoglobin, cardiac troponin I, C-reactive protein and brain natriuretic peptide). The immobilised capture antibodies are involved in sandwich assays of the four proteins together with biotinylated detection antibodies and peroxidase-labelled streptavidin in order to permit a chemiluminescent imaging of the SP platform and a sensitive detection of the assayed proteins. The performances of the system in pure buffered solutions, using a 25-min assay duration, were characterised by dynamic ranges of 0.5–50, 0.1–120, 0.2–20 and 0.67–67 μg/L for C-reactive protein, myoglobin, cardiac troponin I and brain natriuretic peptide, respectively. The four different assays were also validated in spiked 40-times-diluted human sera, using LowCross buffer, and were shown to work simultaneously in this complex medium. Figure Principle of the screen-printed POC microarray and a schematic representation of the assay architecture. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Application of DNA aptamers as sensing layers for detection of carbofuran by electrogenerated chemiluminescence energy transfer

In this study, an electrogenerated chemiluminescence (ECL) sensing platform for carbofuran detection was constructed based on ECL energy transfer (ECRET) and carbon dot (C-dot)-tagged aptamers as the recognition element. Fullerene (C60)-loaded gold nanoparticles (C60-Au) were used as the energy donor, modified on a glassy carbon electrode. C-dot-tagged DNA aptamers were used as the receptor, and ECRET then occurred between C60-Au and C-dots. After accepting the energy, the C-dots acted as a signal indicator and showed decreased signal intensity in the presence of targets, which competitively bound to DNA aptamers and blocked energy transfer. Using this robust, straight-forward strategy, the sensor showed a linear ECL response to carbofuran at concentrations from 2.0 × 10⁻¹¹ mol L⁻¹ to 8.0 × 10⁻⁹ mol L⁻¹. The detection limit of this assay was shown to be 8.8 × 10⁻¹³ mol L⁻¹. Thus, the sensing approach described in this study could be adapted for use in the detection of various pesticide residue targets.     

In vitro selection and characterization of deoxyribonucleic acid aptamers for digoxin

The low therapeutic index of digoxin necessitates careful monitoring of its serum levels. Most of digoxin immunoassays suffer from interferences with digoxin-like immunoreactive substances. Since aptamers have been shown to be highly specific for their targets, the aim of this study was to develop DNA aptamers for this widely used cardiac glycoside. Digoxin was coated onto the surface of streptavidin magnetic beads. DNA aptamers against digoxin were designed using Systematic Evolution of Ligands by Exponential enrichment method (SELEX) by 11 iterative rounds of incubation of digoxin-coated streptavidin magnetic beads with synthetic DNA library, DNA elution, electrophoresis and PCR amplification. The PCR product was cloned and sequenced. Binding affinity was determined using digoxin–BSA conjugate, coated onto ELISA plate. Inhibitory effect of anti-digoxin aptamer was conducted using isolated guinea-pig atrium. Three aptamers (D1, D2 and D3) were identified. Binding studies of fluorescein-labeled truncated (without primer binding region) D1 and D2 and full length D1 anti-digoxin aptamers were performed and their corresponding dissociation constants values were 8.2 × 10⁻⁹, 44.0 × 10⁻⁹ and 17.8 × 10⁻⁹ M, respectively. This is comparable to what other workers have obtained for interaction of monoclonal antibodies raised against digoxin. There was little difference in binding affinity between full length and truncated anti-digoxin D1 aptamer. D1 anti-digoxin aptamer also inhibited the effects of digoxin on the isolated guinea-pig atrium. D1 anti-digoxin aptamer distinguished between digoxin and ouabain in both tissue study and binding experiments. Our finding indicated that D1 anti-digoxin aptamer can selectively bind to digoxin. Further studies might show its suitability for use in digoxin assays and as a therapeutic agent in life-threatening digoxin toxicity.     

Binding kinetics of human cellular prion detection by DNA aptamers immobilized on a conducting polypyrrole

We developed a biosensor based on the surface plasmon resonance (SPR) method for the study of the binding kinetics and detection of human cellular prions (PrP^C) using DNA aptamers as bioreceptors. The biosensor was formed by immobilization of various biotinylated DNA aptamers on a surface of conducting polypyrrole modified by streptavidin. We demonstrated that PrP^C interaction with DNA aptamers could be followed by measuring the variation of the resonance angle. This was studied using DNA aptamers of various configurations, including conventional single-stranded aptamers that contained a rigid double-stranded supporting part and aptamer dimers containing two binding sites. The kinetic constants determined by the SPR method suggest strong interaction of PrP^C with various DNA aptamers depending on their configuration. SPR aptasensors have a high selectivity to PrP^C and were regenerable by a brief wash in 0.1 M NaOH. The best limit of detection (4 nM) has been achieved with this biosensor based on DNA aptamers with one binding site but containing a double-stranded supporting part.

Supramolecular Fluorescence Resonance Energy Transfer in Nucleobase-Modified Fluorogenic RNA Aptamers

RNA aptamers form compact tertiary structures and bind their ligands in specific binding sites. Fluorescence-based strategies reveal information on structure and dynamics of RNA aptamers. Herein, we report the incorporation of the universal emissive nucleobase analog 4-cyanoindole into the fluorogenic RNA aptamer Chili, and its application as a donor for supramolecular FRET to the bound ligands DMHBI⁺ or DMHBO⁺. The photophysical properties of the new nucleobase–ligand-FRET pair revealed structural restraints for the overall RNA aptamer organization and identified nucleotide positions suitable for FRET-based readout of ligand binding. This strategy is generally suitable for binding-site mapping and may also be applied for responsive aptamer devices.     

Selection and identification of ssDNA aptamers recognizing zearalenone

Zearalenone (ZEN) is a nonsteroidal estrogenic mycotoxin produced by Fusarium graminearum on maize and barley. Because most current methods of ZEN detection rely on the use of low-stability antibodies or expensive equipment, we sought to develop a rapid, low-cost determination method using aptamers instead of antibodies as the specific recognition ligands. This work describes the isolation and identification of single-stranded DNA (ssDNA) aptamers recognizing ZEN using the modified systematic evolution of ligands by exponential enrichment methodology based on magnetic beads. After 14 rounds of repeated selection, a highly enriched ssDNA library was sequenced and 12 representative sequences were assayed for their affinity and specificity. The best aptamer, 8Z₃₁, with a dissociation constant (K _d) of 41?±?5 nM, was successfully applied in the specific detection of ZEN in binding buffer and in real samples based on a magnetic separation/preconcentration procedure. This analytical method provided a linear range from 3.14?×?10^?9 to 3.14?×?10^?5 M for ZEN, and the detection limit was 7.85?×?10^?10 M. The selected aptamers are expected to be used in the potential development of affinity columns, biosensors, or other analytical systems for the determination of ZEN in food and agricultural products.

Aptamer sandwich assays: human α-thrombin detection using liposome enhancement

Fluorescent dye-encapsulating liposomes tagged with aptamers were developed and used as reporting signals in an aptamer-based sandwich assay. α-Thrombin was utilized as a prototypical analyte as two well-studied aptamers binding distinct epitopes are available to form a sandwich complex. Cholesteryl–TEG-modified aptamers were embedded into the liposomal lipid bilayer while the interior cavity of the liposomes encapsulated fluorescent sulforhodamine B dye. Such liposomes successfully formed a sandwich complex with α-thrombin and a microtiter plate immobilized aptamer, proving that aptamers retain their ability to fold when anchored to the liposome surface. Parameters studied included liposomal aptamer coverage, sandwich aptamer orientation, aptamer label orientation, aptamer spacer length and type, incubation buffer, and aptamer concentration. The optimized conditions found here in the fluorescence assay led to a limit of detection of 64 pM or 2.35 ng/mL, corresponding to 6.4 fmol or 235 pg, respectively, in a 100 μL volume. This is an order of magnitude lower than previous sandwich aptamer assays using the same sequences with lowest reported limits of detection of 0.45 nM. In addition, the assay was applied successfully to the detection of α-thrombin in human plasma. The success of this method in a standard microtiter plate format and the relatively facile functionalization of liposomes with aptamers suggest that this approach provides a versatile option for routine analytical applications.     

Supramolecular Fluorescence Resonance Energy Transfer in Nucleobase‐Modified Fluorogenic RNA Aptamers

RNA aptamers form compact tertiary structures and bind their ligands in specific binding sites. Fluorescence‐based strategies reveal information on structure and dynamics of RNA aptamers. Herein, we report the incorporation of the universal emissive nucleobase analog 4‐cyanoindole into the fluorogenic RNA aptamer Chili, and its application as a donor for supramolecular FRET to the bound ligands DMHBI⁺ or DMHBO⁺. The photophysical properties of the new nucleobase–ligand‐FRET pair revealed structural restraints for the overall RNA aptamer organization and identified nucleotide positions suitable for FRET‐based readout of ligand binding. This strategy is generally suitable for binding‐site mapping and may also be applied for responsive aptamer devices.