Separation of six purine bases by capillary electrophoresis with electrochemical detection

Capillary zone electrophoresis with electrochemical detection (ED) has been employed for the separation and determination of adenine (A), guanine (G), theophylline (Thp), hypoxanthine (HX), xanthine (Xan) and uric acid (UA). Effects of several important factors such as the acidity and concentration of running buffer, separation voltage, injection time and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 μm carbon disc electrode at a working potential of +0.95 V (versus saturated calomel electrode (SCE)). The six purine bases can be well separated within 14 min in a 40 cm length fused-silica capillary at a separation voltage of 10 kV in a 100 mmol/l borate buffer (BB, pH 10.0). The current response was linear over about three orders of magnitude with detection limits (S/N=3) ranging from 0.157×10⁻⁶ to 0.767×10⁻⁶ mol/l for all compounds. The proposed method was successfully applied to determine Thp in tea and aminophylline tablets, UA in human urine, and two purine bases in DNA.     

Separation and determination of rutin and quercetin in the flowers ofSophora japonica L. by capillary electrophoresis with electrochemical detection

Summary Capillary electrophoresis with amperometric detection has been evaluated for the simultaneous determination of rutin and quercetin. The cyclic voltammogram, hydrodynamic voltammogram, and the effects of pH, concentration of buffer and sodium dodecyl sulfate (SDS), and amount of organic modifier on the separation and the detection were studied. The optimized conditions were: detection potential 1.2V, separation at 12 kV, 5 s at 15 kV for sample injection, running electrolyte 20 mmol L⁻¹ borate buffer, pH 8.8, containing 40 mmol L⁻¹ SDS and 10% acetonitrile. The detection limit of the method was low, 0.001 and 0.0005 mg mL⁻¹, for rutin and quercetin, respectively; the linear ranges were wide −0.005–0.5 and 0.005–0.4 mg mL⁻¹, respectively. The variations in peak current and migration time for eight consecutive injections of a standard solution containing 0.1 mg mL⁻¹ of each compound were 4.78 and 3.63%, and 6.50 and 2.59% for rutin and quercetin, respectively. The levels of the two compounds in traditional Chinese herbal drugs were easily determined.     

Separation and determination of homovanillic acid and vanillylmandelic acid by capillary electrophoresis with electrochemical detection

A method of separation and determination of homovanillic acid (HVA) and vanillylmandelic acid (VMA) was developed based on capillary zone electrophoresis/amperometric detection with high sensitivity, good resolution and selectivity. In order to achieve complete separation and good response, several factors including pH, buffer concentration, separation voltage, detection potential and the length of separation capillary, were studied in detail. The method has been used to determine both HVA and VMA in human urine. Uric acid (UA) in human urine did not interference with their determination. The limit of detection of the method was 1.3×10⁻⁶ mol/l (1.4 fmol) for HVA and 7.9×10⁻⁷ mol/l (0.87 fmol) for VMA at a signal-to-noise ratio of 3.     

Separation and determination of flavonoids in Agrimonia pilosa Ledeb. by capillary electrophoresis with electrochemical detection

Five flavonoids (catechin, hyperoside, quercitrin, quercetin, and rutin) were separated and determined by capillary electrophoresis with electrochemical detection. Effects of several important factors, such as the pH and concentration of running buffer, separation voltage, injection time, and detection potential were investigated to determine the optimum conditions. The five flavonoids were baseline separated within 20 min in a 60 cm length capillary at a separation voltage of 19.5 kV with a running buffer consisting of 60 mmoL/L Na2B4O7 - 120 mmoL/L NaH2PO4 (pH = 8.8). The relationship between peak current and analyte concentration was linear over about two orders of magnitude with detection limits (S/N = 3) ranging from 0.02 to 0.05 microg/mL for all compounds. This method was successfully used to determine the above five flavonoids in Agrimonia pilosa Ledeb. with relatively simple extraction procedures, and the assay results were satisfactory.     

Nonaqueous capillary electrophoresis with indirect electrochemical detection

Nonaqueous capillary electrophoresis (NACE) which makes use of organic solvents in place of conventional aqueous electrophoresis buffers is gaining increasing importance among modern separation techniques. Recently, it has been shown that amperometric detection in conjunction with acetonitrile-based NACE offers an extended accessible potential range and an enhanced long-term stability of the amperometric responses generated at solid electrodes. The present contribution takes advantage of the latter aspect to develop reliable systems for NACE with indirect electrochemical detection (IED). In this context, several compounds such as (ferrocenylmethyl)trimethylammonium perchlorate, tris(1,10-phenanthroline)cobalt(III) perchlorate and bis(1,4,7-triazacyclononane)nickel(II) perchlorate were studied regarding their suitability to act as electroactive buffer additives for IED in NACE. The performance characteristics for the respective buffer systems were evaluated. Tetraalkylammonium perchlorates served as model compounds for the optimization of the NACE-IED system. Target analytes choline and acetylcholine could easily be separated and determined by means of NACE-IED. In the case of a buffer system containing 10(-4) M tris(1,10-phenanthroline)cobalt(III) perchlorate the limits of detection were 2.5 x 10(-7) M and 4.6 x 10(-7) M for choline and acetylcholine, respectively. With the elaborated analytical procedure choline could be determined in pharmaceutical preparations.     

毛细管电泳-电化学检测法测定饲料中的磺胺类药物

采用毛细管电泳-电化学检测法(CE-ED),对饲料中的6种磺胺类药物磺胺脒、磺胺二甲嘧啶、磺胺甲嘧啶、磺胺二甲氧嘧啶、磺胺嘧啶、磺胺甲恶唑进行了分离和测定。分别考察了工作电极电位、运行缓冲液的pH和浓度、分离电压和进样时间等实验参数对实验结果的影响。在优化的实验条件下,以直径300μm的碳圆盘电极为工作电极,检测电位为0.95 V(vs.SCE),在30 mmol/L硼砂-KH2PO4(pH7.6)的运行缓冲溶液中,6个分析物能够在16 min内实现很好的基线分离,被测物浓度与峰电流在3个数量级呈良好的线性,检出限(S/N=3)范围0.08～0.20μg/mL。该方法已应用于实际样品的分析。     

毛细管电泳电化学检测法测定烟草中的多元酚

采用毛细管电泳电化学检测法同时测定了烟草中的多元酚,即芦丁、绿原酸,槲皮素和咖啡酸。考察了工作电极的氧化电位、运行缓冲溶液浓度和pH值,分离电压和进样时间对分离和检测的影响。在优化条件下,以300μm直径的碳圆盘电极为工作电极,检测电位为+0.9 V(vs.SCE),在50 mmol/L硼酸盐(pH 8.4)的运行缓冲液中,被测物浓度与峰电流在三个数量级范围内呈良好线性,检出限为2×10-7或5×10-7g/mL。方法有着良好的重现性,被测组分的迁移时间和峰高的相对标准偏差(RSDs)小于4%(n=7)。单次测定可在16 min内完成,已用于实际样品多元酚的测定,样品处理简单,无须预富集。     

毛细管电泳电化学法分离检测盐酸克伦特罗、特布他林和沙丁胺醇

建立了毛细管电泳电化学法对盐酸克伦特罗、特布他林和沙丁胺醇进行分离检测。方法采用胶束电泳体系,以铂圆盘为工作电极,考察了检测电位、缓冲液浓度和pH、十二烷基硫酸钠(SDS)浓度、分离电压等因素的影响。3个分离物在10 kV的分离电压、缓冲体系为15 mmol/L(pH 9.0)硼砂+20 mmol/L SDS条件下得到分离。盐酸克伦特罗、特布他林和沙丁胺醇的线性范围分别为2.0～400,3.5～700,5.0～1000μg/L。方法已用于猪肉样品的检测。     

Monitoring environmental pollutants by microchip capillary electrophoresis with electrochemical detection

During the past decade, significant progress in the development of miniaturized microfluidic systems has occurred due to the numerous advantages of microchip analysis. This review focuses on recent advances and the key strategies in microchip capillary electrophoresis (CE) with electrochemical detection (ECD) for separating and detecting a variety of environmental pollutants. The subjects covered include the fabrication of microfluidic chips, ECD, typical applications of microchip CE with ECD in environmental analysis, and future prospects. It is expected that microchip CE-ECD will become a powerful tool in the environmental field and will lead to the creation of truly portable devices.     

Separation and detection of lanthanides by capillary electrophoresis

Due to the importance of application of lanthanides in various industries especially the nuclear ones, and the advantages of capillary electrophoresis method in separation of metal cations, this research was carried out in order to investigate the separation potential of lanthanides using capillary electrophoresis via simulation method at laboratory scale. Since the properties of various types of lanthanides are very similar, the separation of lanthanides using the usual approaches was not possible. Thus, the separation of lanthanides was devised upon partial, competing complexation in order to differentiate their properties. Salicylic acid was firstly used as the primary UV-absorbing ligand, whereas formic, acetic, lactic, tartaric and citric acids, which showed no absorption in UV-spectrum and had weaker complexes in comparison to salicylic acid, were used as auxiliary ligands. Upon the results of spectrometry, the wave length of 210 nm was selected for detecting lanthanides. The properties and stability of lanthanides were examined and furthermore acetic and citric acids were selected as auxiliary ligands. The simulation was carried out with respect to the transport phenomena in the unsteady state. The ion species dissociation was found to be directly dependent upon the concentration, and was also used in complexation. The results of simulation showed that the diffusion control of H⁺ and homogenizing electrical field promoted separation quality. The separation conditions were optimized by using the simulation results as well as the tests obtained. In order to optimize the experimental conditions, variable factors such as voltage, injection time, pH, temperature and ionic strength were examined. Also, methanol was used as dissolving modifier as well as noise reducer on the base line. Sodium nitrate was used as ionic strength controller and sucrose for increasing viscosity which optimized separation quality.     

Recent progress for capillary electrophoresis with electrochemical detection

Capillary electrophoresis (CE) is an attractive technique in separation science because of its high separation performance, short analysis time and low cost. Electrochemical detection (EC) is a powerful tool for CE because of its high sensitivity. In this review, developments of CE-EC from 2008 to August, 2011 are reviewed. We choose papers of innovative and novel results to demonstrate the newest and most important progress in CE-EC.      

Determination of enkephalin peptides by nonaqueous capillary electrophoresis with electrochemical detection

Nonaqueous capillary electrophoresis with electrochemical detection (NACE-ED) was applied to the analysis of enkephalin peptides. The effect of different buffer compositions on the electrophoretic behavior of methionine enkephalin, leucine enkephalin, and [D-Ala2]-leucine enkephalin was studied. Separation of the protonated and the deprotonated peptides was obtained using ACN/methanol-based electrolyte systems. The electrochemical behavior of the enkephalins was studied by the capillary batch injection analysis technique. NACE-ED yielded well-defined signals in the oxidation mode only for the negatively charged analytes. The optimized BGE for the counterelectroosmotic separation consisted of 10 mM ammonium acetate in ACN/methanol (3:1 v/v). Using a platinum microdisk electrode set to an actual potential of +0.65 V detection limits in the submicromolar range were observed which are about one order of magnitude lower compared to UV detection. Problems concerning EOF instability and electrode fouling caused by water and other neutral sample impurities transported by the EOF can be avoided in the EOF-inverted mode using poly(ethylene glycol)-coated capillaries and an actual working electrode potential of +1.0 V. For the quantification of the enkephalins [D-Ala2]leucine enkephalin was used as internal standard. The practical utility for the determination of enkephalins in spiked plasma samples after SPE was demonstrated.     

Determination of diclofenac sodium by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of diclofenac sodium using an end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.83 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 4.90 x 10(-3) mol/l Na2HPO4-3.10 x 10(-3) mol/l NaH2PO4 (pH 7.0) for the buffer solution, 10 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 2.5 x 10(-6) mol/l or 5.2 fmol (S/N=2). The relative standard deviation is 0.8% for the migration time and 4.7% for the electrophoretic peak current. The method was applied to the determination of diclofenac sodium in human urine.     

Analysis of amino acids by capillary zone electrophoresis with electrochemical detection

The precapillary derivatization of 20 amino acids with naphthalene-2,3-dicarboxaldehyde (NDA) and CN(-) was investigated. All these derivatized amino acids could be oxidized on the carbon fiber microdisk bundle electrode except proline. Capillary zone electrophoresis with electrochemical detection was employed for the analysis of 19 amino acids. The optimum conditions of separation and detection were borate, pH 9.48, for the electrolyte, 18 kV for the separation voltage and 1.15 V versus a saturated calomel electrode for the detection potential. Limits of detection of concentration or mass for individual amino acids were between 1.7 x 10(-7) and 1.8 x 10(-6) mol/L or 84 and 893 amol (according to the signal-to-noise ratio of 3) for the injection voltage of 6 kV and injection time of 10 s. The relative standard deviations were between 0.80 and 2.3% for the migration times and 1.4 and 6.4% for the electrophoretic peak currents. From a mixture of 19 amino acids, 10 amino acids (Arg, Lys, Orn, Try, Ser, Ala, Gly, Cys, Glu, Asp) could be well separated. The other 9 amino acids appeared on three electrophoretic peaks. From the samples, in which the nine amino acids do not exist simultaneously, some of them could also be detected. The method was applied to the determination of amino acids in beer by the standard addition method. The recovery for the amino acids in beer was 91-109%.     

毛细管电泳电化学检测法测定马钱子中的士的宁和马钱子碱

用毛细管电泳电化学检测法测定了马钱子中的士的宁和马钱子碱.以BR缓冲溶液(35 mmol/L混酸用180 mmol/L NaOH调节至pH 6.50)为电泳液,分离电压为6 kV,检测电位为0.95 V,士的宁和马钱子碱在30 min内得到了良好分离.士的宁和马钱子碱浓度分别在0.35～35.00 μg/mL和0.40(40.00 μg/mL内具有良好的线性关系,检测限分别为0.08μg/mL和0.15μg/mL.应用于马钱子样品的测定.     

Determination of diethylene glycol in toothpaste by capillary electrophoresis with electrochemical detection

Microchimica Acta - Diethylene glycol (DEG) can be determined in toothpaste via capillary electrophoresis at 16 kV using a fused silica capillary of 75 cm length and of...     

Capillary electrophoresis and microchip capillary electrophoresis with electrochemical and electrochemiluminescence detection

Recent advances and key strategies in capillary electrophoresis and microchip CE with electrochemical detection (ECD) and electrochemiluminescence (ECL) detection are reviewed. This article consists of four main parts: CE-ECD; microchip CE-ECD; CE-ECL; and microchip CE-ECL. It is expected that ECD and ECL will become powerful tools for CE microchip systems and will lead to the creation of truly disposable devices. The focus is on papers published in the last two years (from 2005 to 2006).     

Separation of arsenic anions by capillary zone electrophoresis with UV detection

Summary Capillary zone electrophoresis (CZE) in capillary silica columns has been used for the separation of arsenite (AsO ₂ ^– ), arsenate (AsO ₄ ^3– ), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA). The separation of these ionic species has been achieved using a capillary silica column (72 cm×50 m i.d.) with an acidic phosphate buffer and with an on-column UV detection (190 nm). Optimization of experimental parameters (pH, temperature, voltage) were studied. The selectivity of the separation can be improved by working in the pH-range of 4.5–6.5. For analytical inorganic separations of UV-absorbing anions, capillary zone electrophoresis has advantages because of the relatively simple equipment, the short analysis time (15 min), the high efficiency and the low mass detection limit (40 pg for arsenate).     

Separation of phospholipids by capillary zone electrophoresis with indirect ultraviolet detection

A simple method for separation of different anionic and zwitterionic phospholipid classes by capillary zone electrophoresis (CZE), using indirect UV detection with adenosine monophosphate (AMP) as background electrolyte and the UV-absorbing additive, was successfully developed in this study. The separation conditions including apparent pH (pH*) of running buffer, concentration of AMP, organic solvent, applied voltage and capillary temperature were systematically optimized. The application of this method to human blood sample was also briefly examined.