ZnO纳米电缆的制备、结构和生长机理

以混合的锌粉和锡粉作为原料, 通过热蒸发的方法在沉积有金膜的硅基片上制备出具有“芯线-壳层”同轴结构的ZnO/SiO_x纳米电缆. 扫描和透射电镜的研究表明, 这种纳米电缆的产量很高, 长度达到数个微米, 并且确认了其“芯线-壳层”的独特结构. 不同于以往ZnO一维纳米材料的三个快速生长方向〈0001〉、〈0110〉及〈2110〉, 其ZnO芯线的生长方向为[2021]. 本实验中锡粉和金膜分别作为抑制剂和催化剂, 通过控制锌粉的蒸发速率以及金硅共熔反应使ZnO纳米电缆在硅基片上得到一维生长. 这种纳米电缆可望在纳米尺度的电路、电器以及力学和光学信号的耦合和转换方面得到应用.     

Li/Mo codoping of CaO films: a means to tailor the equilibrium shape of Au deposits

Using scanning tunneling microscopy, we have investigated how the doping of CaO thin films affects the growth behavior of gold. Whereas 3D deposits develop on pristine films, 2D islands form after inserting 4% of Mo into the CaO lattice. Adding small amounts of Li to the Mo-doped CaO reinstalls the initial 3D growth regime. We assign this morphology crossover to charge transfer processes between the dopants and the ad-metal. Whereas Mo acts as an electron donor and provides excess charges to be transferred into the gold, Li creates electron traps in the oxide lattice that interrupt the charge flow toward the metal. The different Au charge states in the presence of the dopants are derived from different growth morphologies with anionic gold favoring a 2D mode due to an enhanced interface adhesion. Our work demonstrates how oxide doping can be exploited to tailor the equilibrium geometry of ad-particles on supported metal catalysts.     

Morphological study on diffusion‐limited aggregates of poly(ethylene oxide) on alkali halides

When poly(ethylene oxide) was crystallized on a fresh cleavage surface of alkali halides from solution in isoamyl acetate, diffusion‐limited‐aggregate dendrites were formed. Their patterns varied, depending on the kind of substrate on which the poly(ethylene oxide) crystallized: On a KCl substrate, rather ordered dendrites grew with fibrillar crystallites aligning roughly in the 〈110〉_KCl direction, and coarse dendritic clusters formed on NaCl and KBr during the initial stage of their growth. The dendrites grew and matured to sheet the whole surface of alkali halides with a uniform thickness, and subsequently, tetragonal lamellae formed on it through the spiral growth mechanism or the primary nucleation process. Tetragonal lamellar crystals grew with their diagonals parallel to fibrillar crystallites of dendrites. Their orientation did not result from direct, epitaxial contact with the alkali halide substrate but depended on the fibrillar orientation of the underlying sheeted layer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2421–2430, 2002     

Synthesis and properties of new organosoluble and alternating aromatic poly(ester-amide-imide)s with pendant phosphorus groups

New phosphorus-containing aromatic diesteramines, 1,4-bis(4-aminobenzoyloxy)-2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)naphthalene (p- 3 ) and 1,4-bis(3-aminobenzoyloxy)-2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)naphthalene (m- 3 ), were synthesized by the reaction of 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol with 4-nitrobenzoyl chloride and 3-nitrobenzoyl chloride, respectively, followed by catalytic reduction. Two series of phosphorus-containing aromatic poly(ester-amide-imide)s with inherent viscosities of 0.94–2.00 and 0.41–0.56 dL/g were prepared via low-temperature solution polycondensation from p- 3 and m- 3 , respectively, with three imide ring-preformed diacid chlorides. All the poly(ester-amide-imide)s were amorphous and readily soluble in many organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc or NMP solutions. Their casting films possessed a tensile strength range of 118–181 MPa, an elongation to break of 5–11%, and an initial modulus range of 2.41–4.46 GPa. They had useful levels of thermal stability associated with relatively high glass-transition temperatures (264–286 °C) and 10% weight-loss temperatures in excess of 450 °C in nitrogen or air. The limiting oxygen indices of these polymers were 41–46. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1786–1799, 2001     

Mononukleare und mehrfach verbrückte dinukleare Phthalocyaninate(1–/2–) des Yttriums durch Solvenz‐kontrollierte Kondensation; kleine Solvenz‐Cluster als Liganden

Mononuclear and Multiply Bridged Dinuclear Phthalocyaninates(1–/2–) of Yttrium by Solvent Controlled Condensation; Small Solvent Clusters as Ligands Green chlorophthalocyaninato(2–)yttrium(III), [Y(Cl)pc^2–] forms when yttrium chloride is heated with o‐phthalonitrile in 1‐chloronaphthalene. Black cis‐di(chloro)phthalocyaninato(1‐)yttrium(III), ^cis[Y(Cl)₂pc^–] is obtained as a stable intermediate by partial reduction. Both complexes are soluble in many O‐donor solvents and pyridine. The solubility in water is remarkable: [Y(Cl)pc^2–] dissolves with green, ^cis[Y(Cl)₂pc^–] with red‐violet color. Typical absorptions of the pc^2– ligand are observed at 14800 and 29700 cm^–1. A solvent dependent monomer‐dimer equilibrium is found for the pc^– radical. The monomer with absorptions at 12100 and 19900 cm^–1 is favored in non‐polar solvents, while in polar solvents the dimer with absorptions at 8700, 13200 and 18600 cm^–1 is preferred. cis‐Tri(dimethylformamide)chlorophthalocyaninato(2–)yttrium(III) etherate ( 1 ) crystallises from a solution of [Y(Cl)pc^2–] in MeOH/dmf, cis‐tetra(dimethylsulfoxide)phthalocyaninato(2–)yttrium(III) chloride etherate methanol disolvate ( 2 ) from thf/dmso, μ‐di(chloro)‐μ‐di〈di(pyridine)(μ‐water)〉di(phthalocyaninato(2–)‐ yttrium(III)) ( 5 ) from py, and cis‐(chloro)pyridine(triphenylphosphine oxide)phthalocyaninato(2–)yttrium(III) semi‐etherate ( 3 ) is obtained from a solution of [Y(Cl)pc^2–] and triphenylphosphine oxide in py. 1 condenses in MeOH yielding a (1 : 1)‐mixture ( 4 ) of μ‐di(chloro)di(〈trans‐(diwaterdimethanol)〉〈dimethanol〉phthalocyaninato(2–)yttrium(III)) ( 4 a ) and μ‐di(chloro)di(dimethylformamide〈dimethanol〉phthalocyaninato(2–)yttrium(III)) ( 4 b ); co‐ordinatively bound solvent clusters are in brakets. The structures of 1 – 5 have been established by X‐ray crystallography. Apart from 3 with hepta‐co‐ordinated yttrium, the metal ion prefers octa‐co‐ordination, and the bond arrangement around Y³⁺ is always a distorted quadratic antiprism. In the dinuclear complexes obtained by solvent controlled condensation both antiprisms share an edge by two μ‐Cl atoms in 4 , while in 5 the antiprisms are face‐shared by two trans positioned μ‐Cl atoms and μ‐O atoms, respectively. In 5 , the bent ^b〈{py}₂(μ‐H₂O)〉 cluster is stabilised by a combined interplanar bonding of pyridine by short N…H–O bonds (d(N…O) = 2.664(7) Å; 2.81(2) Å) and strong van‐der‐Waals interactions with the ecliptic pc^2– ligands. 4 a and 4 b contain the dimeric methanol cluster 〈(MeOH)₂〉, and 4 a in addition the cyclic heterotetrameric trans‐diwaterdimethanol cluster, trans^c〈(H₂O)₂(MeOH)₂〉. The neutral clusters co‐ordinatively bound to the Y atom are compared with structurally established cluster‐anions of type 〈(OMe)(MeOH)〉^–, linear ^l〈(OMe)(MeOH)₂〉^–, cyclic ^c〈(OH)₃(H₂O)₃〉^3–, ^b〈{H₂O}₂(μ‐O)〉^2–, and ^b{H₂O}₂(μ‐F)〉^–.     

基于苯并硫氮杂卓的亚胺、烯胺在质子溶剂中的稳定性及其互变异构

用核磁共振法研究了亚胺型杂卓1和烯胺型杂卓2在不同质子溶剂—甲醇、乙醇、叔丁醇、乙酸及CF3CO2D的DMSO-d6溶液中的稳定性及互变异构.结果表明,烯胺型杂卓2在上述溶剂中稳定,亚胺型杂卓1在酸性较弱的质子溶剂中(乙醇、叔丁醇)及较低的温度下(≤30℃)基本稳定,在酸性较强的质子溶剂中(甲醇、乙酸、CF3CO2D的DMSO-d6溶液)向烯胺转化,而且随着溶剂酸性的增强、温度的升高以及反应物与溶剂接触时间的延长,亚胺向烯胺的转化进一步加强.本文还以1a和1b为例,研究了在乙酸溶液中亚胺型杂卓向烯胺型杂卓转化的热力学和动力学特征.研究表明,在283~333 K范围内,该转化的焓变(△H)和熵变(△S)均大于零,吉布斯自由能变(△G)小于零,因此其是吸热、自发及熵增加的过程,该过程可用二级动力学方程来描述,质子对亚胺向烯胺的转化起催化作用.     

The influence of A-site rare-earth for barium substitution on the chemical structure and ferroelectric properties of BZT thin films

Rare-earth (RE) doped Ba(Zr,Ti)O₃ (BZT) thin films were prepared by rf-magnetron sputtering from a Ba_0.90Ln_0.067Zr_0.09Ti_0.91O₃ (Ln=La, Nd) target. The films were deposited at a substrate temperature of 600 °C in a high oxygen pressure atmosphere. X-ray diffraction (XRD) patterns of RE-BZT films revealed a 〈001〉 epitaxial crystal growth on Nb-doped SrTiO₃, 〈001〉 and 〈011〉 growth on single-crystal Si, and a 〈111〉-preferred orientation on Pt-coated Si substrates. Scanning electron microscopy (SEM) showed uniform growth of the films deposited, along with the presence of crystals of about half-micron size on the film's surface. Transmission electron microscopy (TEM) evidenced high crystalline films with thicknesses of about 100 nm for 30 min of sputtering. Electron-probe microanalysis (EPMA) corroborated the growth rate (3.0-3.5 nm/min) of films deposited on Pt-coated Si substrates. X-ray photoelectron spectroscopy (XPS), in depth profile mode, showed variations in photoelectron Ti 2p doublet positions at lower energies with spin-orbital distances characteristic of BaTiO₃-based compounds. The XPS analysis revealed that lanthanide ions positioned onto the A-site of the BZT-perovskite structure increasing the MO₆-octahedra distortion (M=Ti, Zr) and, thereby, modifying the Ti-O binding length. Polarization-electric field hysteresis loops on Ag/RE-doped BZT/Pt capacitor showed good ferroelectric behavior and higher remanent polarization values than corresponding non-doped system.     

Synthesis of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>〈B〉 solid precursors and LiNbO<Subscript>3</Subscript>〈B〉 batches and their phase compositions

A process has been developed for preparing boron-doped niobium pentoxides Nb₂O₅〈B〉 to be used as precursors in the sysnthesis of nithium biobate batches LiNbO₃〈B〉 having tailored dopant concentrations. Solutions of various origins were used to isolate Nb₂O₅〈B〉. A method has been advanced to account for boron loss as volatile compounds upon the heat treatment of niobium hydroxide in order to determine the boron amount to be added to niobium hydroxide in the form of H₃BO₃. The boron concentration in LiNbO₃〈B〉 during lithium niobate synthesis is shown to be independent of the origin of the Nb₂O₅〈B〉 precursor with the same as-batch boron concentration. The phase compositions of Nb₂O₅〈B〉 and LiNbO₃〈B〉 have been characterized by X-ray powder diffraction and IR spectroscopy and boron concentrations have been determined for the synthesis of single-phase lithium niobate batches for use in the production of optically uniform single crystals and pore-free piezoelectric ceramics.     

Structural relationships and mechanisms for the stoichiometry change from MX3 (YF3-type) through MX2 (fluorite-type) to M2X3 (C-type sesquioxide)

Structures produced by inducing stoichiometry changes in crystalline fluorides and oxide-fluorides of yttrium by pyrohydrolysis have been studied by X-ray powder diffraction and electron microscopy. The structures of YF₃, various fluorite-related intermediates and the ultimate product of hydrolysis, Y₂O₃, are all closely related. The pyrohydrolysis is topotactic; the anion sublattice remains intact and vacancies and oxygen substitute for fluorine on the anion sublattice in an ordered, cooperative way to produce fully ordered product structures. A ‘unit slip’ mechanism, involving the most favourable slip systems for a primitive cubic sublattice, 〈001〉{110} and 〈001〉{110}, is postulated as a possible mechanism for the process.     

Oxide electrodes. A new technique to bind oxide powders onto Au substrates

A technique is described to obtain supported oxide powder electrodes. Preformed powders are first embedded into a gold substrate, as reported by Totir et al. [D.A. Totir, B.D. Cahan, D.A. Scherson, Electrochim. Acta 45 (1999) 161], and then made to adhere in place by heating at T∼260–300 °C in flowing oxygen. This latter step is of the greatest importance to obtain reliable electrodes for use in aqueous electrolytes. Electrode stability and reproducibility are examined on voltammetric and O₂ evolution results using Co₃O₄ as a sensitive test oxide material. Many independent Au–Co₃O₄ electrodes compare favourably with one another and with graphite-supported electrodes from an unrelated, room temperature binding technique. Substrate and oxide-substrate junction effects are minimised.     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

A 3D AgCl Hierarchical Superstructure Synthesized by a Wet Chemical Oxidation Method

A novel 3D AgCl hierarchical superstructure, with fast growth along the 〈111〉 directions of cubic seeds, is synthesized by using a wet chemical oxidation method. The morphological structures and the growth process are investigated by scanning electron microscopy and X‐ray diffraction. The crystal structures are analyzed by their crystallographic orientations. The surface energy of AgCl facets {100}, {110}, and {111} with absorbance of Cl^? ions is studied by density functional theory calculations. Based on the experimental and computational results, a plausible mechanism is proposed to illustrate the formation of the 3D AgCl hierarchical superstructures. With more active sites, the photocatalytic activity of the 3D AgCl hierarchical superstructures is better than those of concave and cubic ones in oxygen evolution under irradiation by visible light.     

β-Ga2O3 nanowires sheathed with boron nitrogen

A new synthetic route was developed to obtain β-Ga₂O₃ nanowires by heating mixed B and Ga₂O₃ powder precursor at 1600 °C under Ar atmosphere. The nanowires have widths of 30–60 nm and perfect crystallinity. When the heating of B and Ga₂O₃ powder precursor was carried out in N₂ atmosphere, β-Ga₂O₃ nanowires sheathed with BN layers (3–5 nm) were yielded. The structure and composition of the products were characterized. The growth scenario for the β-Ga₂O₃ nanowires as well as the formation of outer BN sheaths was also discussed.     

n型半导体硅电极表面Au的电化学成核机理

在成功实现半导体硅表面电沉积致密金膜的柠檬酸盐镀金实际应用体系中,运用循环伏安和电位阶跃法研究了Au在n型Si(111)电极表面的电沉积过程和成核机理.结果表明,在该体系中, Au在Si表面呈现不可逆电极过程,成核过电位达到250 mV;根据Cottrell方程求得扩散系数D = (1.81 ± 0.14) × 10^-4 cm₂·s^-1;运用Scharifker-Hills (SH)理论模型对比分析拟合实验结果,表明Au在n型Si表面遵循扩散控制下的三维连续成核机理;通过扫描电子显微镜观察Au初期成核、生长形貌,进一步证实了Au的三维连续成核机制,并讨论了阶跃电位和阶跃时间对Au核形貌和密度的影响.     

Time-resolved in situ XAS study of the preparation of supported gold clusters

Incipient-wetness impregnation of gamma-Al(2)O(3) with HAuCl(4) and subsequent removal of chlorine with NaOH, and deposition-precipitation of HAuCl(4) on TiO(2) at pH 7 resulted in supported Au(3+) species. Time-resolved in situ XAS at the Au L(3) edge showed that the Al(2)O(3)-supported oxidic or hydroxidic species were reduced in hydrogen at 440 K to yield small metallic gold clusters. The Au(3+) precursor decomposed to metallic gold in inert atmosphere at 573 K and in oxidizing atmosphere above 623 K. In all atmospheres, initially small clusters were formed that gradually grew with increasing temperature. The TiO(2)-supported species were considerably less stable. In hydrogen and carbon monoxide, Au(0) clusters of 1 to 1.5 nm were formed at room temperature, which was the lowest temperature studied. In inert and oxidizing atmosphere, the Au(3+) precursor decomposed fully to metallic gold at 530 K, as shown by XAS and temperature-programmed experiments. Large clusters were obtained already in the initial stage of reduction. Residual chlorine inhibited the reduction and led to sintering of the gold clusters. Exposure of the TiO(2)-supported catalyst precursor to light or the X-ray beam led to partial reduction, and STEM showed that storage of the reduced gold clusters under ambient conditions led to agglomeration and bimodal cluster-size distributions.     

三维多孔Sn-Zn合金电极助力Zn的均匀沉积/剥离

通过在化学镀构建的三维多孔铜上电沉积锡-锌(Sn-Zn)合金, 构筑了孔径为5 μm左右的三维多孔 Sn-Zn合金电极(3D Sn-Zn), 对其形貌、 结构和性能进行了表征和测定. 结果表明, 该电极拥有高稳定性和适宜孔径的三维多孔结构, 可降低局部电流密度, 提供均匀的电场分布, 缓解了由于锌的不均匀生长而造成的粗大枝晶; 合金镀层中的Sn元素不仅可以增大析氢过电位, 增强电极的防腐蚀性能, 还可降低锌的形核势垒, 为锌的沉积提供丰富的形核位点, 促进锌在电极表面的均匀沉积, 减少枝晶的形成. 采用3D Sn-Zn电极组装的对称电池, 在0.5 mA/cm² 下可稳定循环超过1200 h, 电压滞后仅为21.3 mV; 而采用锌片(2D Zn)组装的对称电池电压滞后达到了99.2 mV, 且在循环300 h后开始出现剧烈的电压波动. 使用3D Sn-Zn电极组装的全电池在 1.8 A/g电流密度下可稳定循环2000次.     

Random-coil dimensions and dipole moments of propylene–vinyl chloride copolymers

Mean-square unperturbed dimensions 〈r²〉₀ and dipole moments 〈μ²〉 have been calculated for propylene–vinyl chloride copolymers by means of rotational isomeric state theory. The calculations indicate that for these chain molecules 〈mu;²〉 is much more sensitive to chemical sequence distribution than is 〈r²〉₀, a conclusion in agreement with results of previous studies of ethylene–propylene copolymers and styrene-substituted styrene copolymers. In the case of propylene–vinyl chloride chains, both 〈r²〉₀ and 〈μ²〉 are most strongly dependent on chemical sequence distribution in the case of copolymers which are significantly syndiotactic in stereochemical structure. At equimolar chemical composition, increase in average chemical sequence length generally increases 〈r²〉₀ but decreases 〈μ²〉. Under some conditions, values of these statistical properties go through a minimum with increase in the reactivity ratio product r₁r₂, thus complicating the use of experimental values of these properties in the characterization of chemical sequence distributions in these copolymers.     

Spontaneous oscillations in gold electrodeposition

We report the appearance of spontaneous oscillations during the electrodeposition of gold along the surface of aqueous hydrogen tetrachloroaurate solutions coated by a positively charged dimethyldioctadecylammonium monolayer, when a current ramp with a rate comprised between 1 and 1.5 nA s⁻¹ is applied to the working electrode. Alternating sequences of two-dimensional (2D) growth and three-dimensional (3D) thickening of the deposits leading to gold films with a well-defined terraced structure are observed. Such a phenomenon appears to be produced by the competition between two mechanisms controlling the current density J₁: one is the current ramp which tends to increase J₁ and the other one is the growing of the gold deposit which induces a decrease of J₁.     

Oxidation of Au by surface OH: nucleation and electronic structure of gold on hydroxylated MgO(001)

The nucleation and electronic structure of vapor-deposited Au on hydroxylated MgO(001) surfaces has been investigated under ultrahigh vacuum conditions. Hydroxylated MgO(001) surfaces with two different hydroxyl coverages, 0.4 and 1 monolayer, respectively, were prepared by exposure to water (D(2)O) at room temperature. Scanning tunneling microscopy experiments show significantly higher gold particle densities and smaller particle sizes on the hydroxylated MgO surface as compared to gold deposited on clean MgO(001). Infrared spectroscopy and X-ray photoelectron spectroscopy experiments were performed to reveal details about the initial nucleation of gold. Gold atoms are found to chemically interact with a specific type of hydroxyl groups on the MgO surface, leading to the formation of oxidized gold particles. The enhanced adhesion of Au particles, which is due to the formation of strong Au-O interfacial bonds, is responsible for the observed higher stability of small Au clusters toward thermal sintering on hydroxylated MgO surfaces. The results are compared to similar studies on Au/TiO(2)(110) model systems and powder samples prepared by the deposition-precipitation route.     

Growth of SnO nanobelts and dendrites by a self-catalytic VLS process

This article reports on the growth of SnO nanobelts and dendrites by a carbothermal reduction process. The materials were synthesized in a sealed tube furnace at 1210 degrees C and at 1260 degrees C for 2 h, in a dynamic nitrogen atmosphere of 40 sccm. After synthesis, gray-black materials were collected downstream in the tube and the samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). The results showed that the gray-black materials were composed of nanobelts, which grew in the [110] direction of the orthorhombic structure of SnO. Some of the belts also presented dendritic growth. The dendrites grew in the (110) planes of the SnO structure, and no defects were observed at the junction between the nanobelts and the dendrites. A self-catalytic vapor-liquid-solid (VLS) process was proposed to explain the growth of the SnO nanobelts and dendrites.