Comparison of sodium tetraethylborate and sodium tetra(n-propyl)borate as derivatization reagent for the speciation of organotin and organolead compounds in water samples

The influence of pH on the propylation with sodium tetra(n-propyl)borate of butyl- and phenyltins as well as for trimethyl- and triethyllead was investigated. Ethylation and propylation with tetraalkylborates were compared with regard to derivatization yields and figures of merit for organotin compounds in real water samples. Similar results for limit of detection (3-12 ng/L as tin), derivatization yield (40-100%) and relative standard deviation of the method (3-10%) were achieved for derivatization with the two tetraalkylborates. Propylation is thus the preferred method for the simultaneous determination of environmentally relevant organotin and organolead compounds. The handling of the hygroscopic and air sensitive reagents NaBEt4 and NaBPr4 was simplified by dissolving them in tetrahydrofurane. The reagent solutions in tetrahydrofurane can be stored for at least one month at 4 degrees C in the dark without observing any decrease in the derivatization efficiency.     

Speciation of butyltin compounds in environmental and biological samples using headspace single drop microextraction coupled with gas chromatography-inductively coupled plasma mass spectrometry

A method based on headspace single drop microextraction (HS-SDME) in combination with gas chromatography-inductively coupled plasma mass spectrometry (GC-ICP-MS) was proposed for the speciation analysis of butyltin compounds in environmental and biological samples. The sodium tetraethylborate (NaBEt4) and sodium tetrahydroborate (NaBH4) were used as the derivatizing reagent for in situ derivatization of the butyltins. For the two derivatizations, the HS-SDME parameters such as organic solvent, drop volume, sample pH, stirring rate, temperature, extraction time and the ionic strength were examined systematically. The analytical performance including the linearity ranges, limits of detection (LODs) and reproducibilities of the two derivatizations were compared under the respective optimized conditions. Derivatization with NaBEt(4) proved to be more sensitive and robust than that with NaBH4, leading to the LODs of 1.4 ng/L for MBT, 1.8 ng/L for DBT and 0.8 ng/L for TBT. The reproducibilities, expressed as relative standard deviations (RSDs), were in the range of 1.1-5.3% (c=1 microg/L, n=3). With tripropyltin (TPrT) as internal standard, HS-SDME-GC-ICP-MS with NaBEt(4) derivatization was applied for the speciation analysis of butyltins in real seawater and shellfish samples. The butyltins found in the real-world samples are 31ng/L MBT, 79 ng/L DBT and 32 ng/L TBT for seawater, and 11.6-30.4 ng/g MBT, 11.8-8.9 ng/g DBT and 12.8-52.6 ng/g TBT for different shellfish samples. For validation, the developed method was also employed for the speciation analysis of butyltins in certified reference material (CRM) of PACS-2 sediment, and the determined values are in a good agreement with the certified values. The developed method is simple, rapid, sensitive, and cost-effective and provides an attractive alternative for butyltins speciation in biological and environmental samples with complex matrix.     

Simultaneous speciation of methylmercury and butyltin species in environmental samples by headspace-stir bar sorptive extraction-thermal desorption-gas chromatography-mass spectrometry

In this work, making use of experimental designs, headspace-stir bar sorptive extraction (HS-SBSE) followed by thermal desorption (TD) coupled to a gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of mercury and tin organometallic compounds present in surface water, sediment and biological tissue was optimized. All solid samples require a previous extraction typically done with diluted HCl or KOH/methanol solutions, and the derivatization, in all the cases, of the organometallic compounds with NaBEt(4). As a consequence, the preconcentration step was carried out in a 0.1 mol L(-1) HOAc/NaOAc buffer solution, with 0.1% (m/v) of NaBEt(4), without the addition of NaCl as a salting out reagent, and with the stir bar (20 mm x 1 mm) located in the headspace (HS). In addition, the desorption step required the following conditions: 250 degrees C (desorption temperature), 15 min (desorption time), 14.1 psi (approximately 97.2 kPa) (vent pressure) and 75 mL min(-1) (vent flow). Finally, to assure the extraction of all the analytes under equilibrium, 5h are required. Inorganic mercury (Hg(2+)) and tripropyltin (TPrT) were used as internal standards to correct for variations in the extraction, derivatization and detection steps. The resulting method provides precise (4-17%) and accurate (against four certified reference materials) results in the ng L(-1) and pg g(-1) range concentrations with recoveries within 80-120% for water samples. The proposed methodology is currently applied in the speciation analysis of specimens obtained in different estuarine sites of the Basque Coast.     

Investigating the potential of high-performance liquid chromatography with atmospheric pressure chemical ionization-mass spectrometry as an alternative method for the speciation analysis of organotin compounds

Liquid chromatography with atmospheric pressure chemical ionization-mass spectrometry (LC-APCI-MS) was applied for the determination of butyl- and phenyltin compounds. Chromatography was performed on a 30 x 2 mm, 3 microm C18 column, enabling the separation of mono-, di- and trisubstituted butyl- and phenyltin compounds in less than 10 min using a water/1% trifluoroacetic acid/methanol gradient. While satisfactory retention and resolution is achieved for the di- and trisubstituted butyl- and phenyltin compounds, monobutyltin and monophenyltin cannot be resolved chromatographically. Depending on the parameter values of the interface, APCI-MS detection allows both specific detection of the molecular ion or cluster ion at low to intermediate fragmentor voltages or quasi-element specific detection of the Sn+ ion released from the organotin compounds at high fragmentor voltages. The sensitivity of MS detection is similar for butyl- and phenyltin compounds, but varies largely from mono- to trisubstituted organotin compounds with tributyl- and triphenyltin being the most sensitively detectable compounds. Detection limits are in the 20-65 pg (abs.) range in SIM mode and in the 750-2000 pg (abs.) range in the scan mode for tributyl- and triphenyltin and for dibutyl- and diphenyltin, respectively. Monobutyl- and monophenyltin can be detected with much lower sensitivity which, together with their unfavorable chromatographic behavior, accounts for the fact that they cannot be analyzed at environmentally relevant concentrations. Although LC-APCI-MS is generally less sensitive than comparable GC methods, it is applicable to the analysis of environmental samples as demonstrated by the analysis of the PACS-2 sediment certified reference material. Although the derivatization of the ionic organotin compounds, which particularly in real samples is a potential source of error, is circumvented when LC-APCI-MS is used, the extraction step is still critical and may lead to underestimation when quantitation is not done by the method of standard addition.     

Speciation of organotin in environmental sediment samples

An optimized sample preparation procedure for organotin speciation in sediment samples has been applied to the analysis of sediments collected in the environment. The method is based on tropolone complexation of the ionic organotins, followed by extraction into a hexane-ethylacetate mixture and derivatization by NaBEt(4). The method was applied to the determination of organotin in various harbour, shipyard and dry-dock sediments in Belgium. Butyltin compounds were detected in all samples analyzed, often at high mg kg(-1) levels. A limited number of samples showed the presence of phenyltin compounds. Further, the method was adapted to the analysis of river sediments sampled from the vicinity of shipyards. Butyltin concentrations were detected at the microg kg(-1) level in the majority of samples.     

Determination of the acaricide fenbutatin oxide in water samples by automated headspace-SPME-GC/MS

The analysis of the acaricide fenbutatin oxide (FBTO) having a molecular weight of 1052.66 g mol(-1) in water samples by capillary GC/MS after in-situ derivatization with sodium tetraethylborate (NaBEt4) and headspace-SPME enrichment is described. Automated SPME is performed at 80 degrees C for 30 min. Detection is carried out in the ion monitoring mode with deuterated triphenyltin (TPhTd15) as internal standard. Good linearity (R2 = 0.9993) was obtained in the dynamic range 20 to 1000 ng L(-1) with a limit of detection of 16 ng L(1) (LOD at 3 S/N) and a limit of quantitation of 50 ng L(-1) (LOQ at 10 S/N). Intra-day RSD% for n=6 was 8.9 at the LOQ level.     

Rapid quantitative determination of ephedra alkaloids in tablet formulations and human urine by microchip electrophoresis

Microchip electrophoresis with fluorescence detection has been applied for fast separation and determination of ephedra alkaloids in pharmaceutical formulations and body fluids. A custom epifluorescence microscope setup was employed and the compounds were separated within 40?s, allowing the detection of less than 200?ng/L for both analytes. Quantitation of the two stimulants was performed via a derivatization step using FITC without any extraction or preconcentration steps. The effects of different microchip types and excitation light sources were investigated and the method was successfully applied for the analysis of these compounds in tablet formulations, yielding recovery rates from 100.2 to 101.1% and relative standard deviations from 1.5 to 3.4%. Analysis of ephedrines was also carried out with human urine samples at detection limits of 500-1000?ng/L and relative standard deviations from 2.2 to 3.3% using argon ion LIF detection.     

气相色谱-质谱法测定水体中5种典型有机紫外防晒剂

建立了水体中5种典型有机紫外防晒剂甲氧基肉桂酸乙基己酯（ethylhexyl methoxycinnamate,EHMC）、二苯酮-3（benzophenone-3,BP-3）、4-甲基苄亚基樟脑（4-methylbenzylidene camphor,4-MBC）、奥克立林（octocrylene,OC）和胡莫柳酯（homosalate,HMS）的气相色谱-质谱检测方法。对HMS、BP-3衍生化条件进行了系统的优化。以100 μL双（三甲基硅烷基）三氟乙酰胺（N,O-bis（trimethylsilyl） trifluoroacetamide,BSTFA）为衍生化试剂,在100 ℃下反应100 min。水样固相萃取选用Oasis HLB萃取柱（0.5 g）,洗脱溶剂为乙酸乙酯-二氯甲烷（1：1,v/v）,水样pH 3~5。该方法对5种化合物的检出限范围为0.5~1.2 ng/L,定量限范围为1.4~4.0 ng/L。最佳实验条件下,加标水样回收率为87.85%~102.34%,相对标准偏差（n=3）均小于5%。该方法成功地应用于昆明市第一污水厂进出口水样中目标物质的分析。     

Determination of chlorophenols in water samples using simultaneous dispersive liquid-liquid microextraction and derivatization followed by gas chromatography-electron-capture detection

Simultaneous dispersive liquid-liquid microextraction (DLLME) and derivatization combined with gas chromatography-electron-capture detection (GC-ECD) was used to determine chlorophenols (CPs) in water sample. In this derivatization/extraction method, 500 microL acetone (disperser solvent) containing 10.0 microL chlorobenzene (extraction solvent) and 50 microL acetic anhydride (derivatization reagent) was rapidly injected by syringe in 5.00 mL aqueous sample containing CPs (analytes) and K(2)CO(3) (0.5%, w/v). Within a few seconds the analytes derivatized and extracted at the same time. After centrifugation, 0.50 microL of sedimented phase containing enriched analytes was determined by GC-ECD. Some effective parameters on derivatization and extraction, such as extraction and disperser solvent type and their volume, amount of derivatization reagent, derivatization and extraction time, salt addition and amount of K(2)CO(3) were studied and optimized. Under the optimum conditions, enrichment factors and recoveries are in the range of 287-906 and 28.7-90.6%, respectively. The calibration graphs are linear in the range of 0.02-400 microg L(-1) and limit of detections (LODs) are in the range of 0.010-2.0 microg L(-1). The relative standard deviations (RSDs, for 200 microg L(-1) of MCPs, 100 microg L(-1) of DCPs, 4.00 microg L(-1) of TCPs, 2.00 microg L(-1) of TeCPs and PCP in water) with and without using internal standard are in the range of 0.6-4.7% (n=7) and 1.7-7.1% (n=7), respectively. The relative recoveries of well, tap and river water samples which have been spiked with different levels of CPs are 91.6-104.7, 80.8-117.9 and 83.3-101.3%, respectively. The obtained results show that simultaneous DLLME and derivatization combined with GC-ECD is a fast simple method for the determination of CPs in water samples.     

Trends in flow-based analytical methods applied to pesticide detection: a review

Landfilling is the most common disposal of municipal waste. During the decomposition of different waste materials, several toxic compounds are leached. Although organotin compounds (OTC) represent an important group of pollutants in landfill leachates, there are only few analytical procedures reported for their analysis. These procedures are complex or recommend the use of enriched stable isotopes that are available only for butyltins. In the present work analytical procedure for simultaneous routine speciation analysis of methyl-, butyl-, phenyl- and octyl-tins in landfill leachates by GC-ICP-MS was developed. For this purpose the applicability of methanol as co-extraction reagent and Tris-citrate buffer for adjustment of pH for derivatization of OTC in landfill leachates was carefully investigated. The use of NaBEt(4) and NaBPr(4) as derivatization reagents for liquid-liquid extraction into hexane was critically evaluated. 15m GC column was used for rapid separation of OTC. The developed analytical procedure was sensitive (LODs for OTC investigated in general better than 2 ng Sn L(-1)) with good repeatability of measurement (RSDs mostly better than 3%) and was successfully applied in the analysis of OTC in landfill leachates using standard addition calibration method. Due to its simplicity and reliability it is appropriate to be used in routine laboratories for monitoring of OTC in landfill leachates.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Speciation of organotin compounds in marine sediments by capillary column gas chromatography-atomic absorption spectrometry coupled with hydride generation

A method for speciation of organotin compounds in marine sediments by solvent extraction combined with hydride generation gas chromatography-atomic absorption spectrometry has been developed. Sediment samples spiked with tributyltin and triphenyltin chlorides were homogenized in hydrochloric acid. The chlorides were extracted twice into toluene. Recoveries of the organotin compounds from the spiked sediment samples were improved by the addition of 8-quinolinol. Tributyltin and triphenyltin chlorides form ion-associates with 8-quinolinol in aqueous hydrochloric acid. The method was optimized with respect to derivatization reactions and extraction conditions. Interferences from Sn(II/IV) and additional 13 ions were investigated. Recoveries of 84-100% for tributyltin and 86-100% for triphenyltin were achieved using this method. The detection limits obtained for tributyltin and triphenyltin chlorides were 95 and 145 pg, respectively, corresponding to a relative detection limit of 95 and 145 ng kg(-1) in the sediment.     

Analysis of carbamate pesticides in water samples using single-drop microextraction and gas chromatography–mass spectrometry

Single-drop microextraction (SDME) followed by gas chromatography–mass spectrometry detection was used for the determination of some carbamate pesticides in water samples. The studied pesticides were thiofanox, carbofuran, pirimicarb, methiocarb, carbaryl, propoxur, desmedipham and phenmedipham. Two alternative sample introduction methods have been examined and compared; SDME followed by cool on-column injection (without derivatization) and SDME followed by in-microvial derivatization and splitless injection. Acetic anhydride was used as derivatization reagent. Parameters that affect the derivatization reaction yield and the extraction efficiency of the SDME method were studied and optimized. The analytical performances and possible applications of both approaches were investigated. Relative standard deviations for the studied compounds ranged from 3.2 to 8.3%. The detection limits obtained by the derivatization method were found to be in the range 3–35 ng/L. Using cool on-column injection (without derivatization), the detection limits were between 30 and 80 ng/L.     

Analysis of off-flavors in the aquatic environment by stir bar sorptive extraction–thermal desorption–capillary GC/MS/olfactometry

The off-flavor compounds 2-methylisoborneol (MIB), geosmin, 2,4,6-trichloroanisole, 2,3,6-trichloroanisole, 2,3,4-trichloroanisole, and 2,4,6-tribromoanisole were analyzed in water samples by stir bar sorptive extraction (SBSE) followed by on-line thermal desorption (TD) capillary GC/MS. Quantification was performed using the MS in the single-ion-monitoring mode (SIM) with 2,4,6-trichloroanisole-D(5 )as internal standard. Quantification limits are 0.1-0.2 ng L(-1) for the haloanisoles, 0.5 ng L(-1) for geosmin, and 1 ng L(-1) for MIB. The relative standard deviations at the quantification limit ranged from 7 to 14.6%. SBSE recovery was evaluated by spiking real water samples and varied from 87 to 117%. More than twenty samples per day can be analyzed by SBSE-TD-capillary GC-MS. The same technique in combination with olfactometry was used to elucidate unknown odorous compounds in water samples.     

Determination of organotin compounds in biological samples using accelerated solvent extraction,sodium tetraethylborate ethylation,and multicapillary gas chromatography–flame photometric detection

A method has been developed for species-selective analysis of organotin compounds in solid, biological samples. The procedure is based on accelerated solvent extraction (ASE) of analytes and includes extraction of the tin species with a methanol–water (90% methanol) solution of acetic acid/sodium acetate containing tropolone (0.03% w/v), their ethylation with NaBEt₄, and separation and detection by GC–FPD. The analytical procedure was optimized with an unspiked sample of harbor porpoise (Phocoena phocoena) liver. Effects of ASE operational variables (extraction temperature and pressure, solvent composition, number of static extraction steps) are discussed. Method detection limits (MDL) were in the range 6–10 ng(Sn) g^–1 dry weight and 7–17 ng(Sn) g^–1 dry weight for butyl- and phenyltin compounds, respectively. Recoveries were comparable with or better than those obtained by use of other procedures reported in the literature. The analytical procedure was validated by analysis of NIES No. 11 (fish tissue) certified reference material.     

Analysis of some chlorophenoxy acids and carbamate herbicides in water and soil as amide derivatives using gas chromatography-mass spectrometry

A newly developed method for determining three phenoxy acids and one carbamate herbicide in water and soil samples using gas chromatography with mass spectrometric detection is developed. Phenoxy acids are derivatized through a condensation reaction with a suitable aromatic amine. 1,1-Carbonyldiimidazole is used as a condensation reagent. Derivatization conditions are optimized with respect to the amount of analyte, amine, solvent, and derivatization reagent. The optimum derivatization yield is accomplished in acetonitrile. 4-Methoxy aniline is used as a derivatizing agent. Obtained derivatives are stable indefinitely. Enhancement in sensitivity is achieved by using the single-ion monitoring mass spectrometric mode. The effectiveness of the developed method is tested by determining investigated compounds in water and soil samples. Analytes are concentrated from water samples using liquid-phase extraction and solid-phase extraction. Soil samples are extracted using methanol. Detection limits of 1.00, 50.00, 100.00, and 1.00 ng/mL are obtained for 2-(1-methylethoxy)phenyl methylcarbamate (Baygon), 2-(3-chlorophenoxy)-propionic acid (Cloprop), 2,4,5-trichlorophenoxyacetic acid, and 4-(2,4-dichlorophenoxy)butyric acid, respectively. LPE for spiked water samples yields recoveries in the range of 60.6-95.7%, with relative standard deviation (RSD) values of 1.07-7.85% using single component calibration curves. Recoveries of 44.8-275.5%, with RSD values ranging from 1.43% to 8.61% were obtained using a mixed component calibration curves. SPE from water samples and soil samples showed low recoveries. The reason is attributed to the weak sorption capabilities of soil and Al(2)O(3).     

Fully automated determination of parabens, triclosan and methyl triclosan in wastewater by microextraction by packed sorbents and gas chromatography-mass spectrometry

A fully automated method for the determination of triclosan (TCS), its derivative methyl triclosan (MeTCS) and six parabens (esters of 4-hydroxybenzoic acid) including branched and linear isomers of propyl (i-PrP and n-PrP) and butyl paraben (i-BuP and n-BuP) in sewage water samples is presented. The procedure includes analytes enrichment by microextraction by packed sorbent (MEPS) coupled at-line to large volume injection-gas chromatography-mass spectrometry (LVI-GC-MS). Under optimised conditions, compounds were extracted from 2 mL samples, adjusted at pH 3, using a C18 MEPS-sorbent. Adsorbed analytes were eluted directly into the Programmable Temperature Vaporizer (PTV) injector of the chromatograph with 2×25 μL of ethyl acetate. They were quantified using standard solutions in ultrapure water submitted to the same sample enrichment process as real sewage water samples. After signal normalisation using isotopic labelled species as internal surrogates, no differences were noticed among the extraction efficiency for sewage and ultrapure water; moreover, the proposed method reported lineal calibration curves from 0.1 to 10 ng mL(-1), relative standard deviations (%RSD) between 2 and 7.1% and limits of detection (LODs) varying from 0.001 to 0.015 ng mL(-1) in ultrapure water and from 0.02 to 0.59 ng mL(-1) in the most complex sample (raw wastewater).     

Derivatization procedures for the detection of estrogenic chemicals by gas chromatography/mass spectrometry

This work evaluated derivatization procedures for detecting both natural and synthetic estrogenic chemicals by gas chromatography/mass spectrometry (GC/MS). Different silylating agents, mainly trimethylsilylating (TMS) agents, were compared, and the roles of various content of trimethylchlorosilane (TMCS, as a stimulator) were investigated. The difference in the abundances of the derivatives was caused by the steric hindrance of multiple hydroxyl groups and ethynyl groups in the structures of estrogenic chemicals. The use of TMCS produces an increase in the derivatization yield, especially for the compounds with multiple hydroxyl groups (i.e., 17beta-estradiol (E(2)) and estriol (E(3))). Mass spectra of O-TMS derivatives and tentative fragmentation profiles are proposed. Molecular ions were the base peaks for all the derivatives, and were used as the quantitation ions to obtain maximum detection sensitivity and specificity. Sample enrichment was achieved by Oasis HLB solid-phase extraction cartridges. The quantitation limits of these compounds ranged from 5 to 10 ng/L in 1000-mL water samples. Recovery of the estrogenic chemicals in spiked various water samples ranged from 78 to 102% while relative standard deviation (RSD) ranged from 1 to 15%.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Comparison of two derivatizing agents for the simultaneous determination of selenite and organoselenium species by gas chromatography and atomic emission detection after preconcentration using solid-phase microextraction

Two methods for the simultaneous determination of selenite and two organoselenium compounds, dimethylselenide (DMSe) and dimethyldiselenide (DMDSe), are proposed. Both methods involve sample preconcentration by solid-phase microextraction (SPME) and capillary gas chromatography coupled to atomic emission detection (GC-AED). The main difference between the methods is the derivatizing agent used to complex the inorganic species: sodium tetraethylborate and 4,5-dichloro-1,2-phenylenediamine. The parameters affecting the derivatization and preconcentration steps, chromatographic separation as well as detection of the compounds were optimized. Direct immersion (DI) mode and a relatively long extraction time were selected for the method involving the formation of the piazselenol complex, better sensitivity being achieved for the three analytes under study. In this case, detection limits ranged between 3 and 25 ng L(-1), depending on the compound. Headspace mode (HS) and extraction times of 20 min were selected for the method involving tetraalkylborate, and detection limits of between 7.3 and 55 ng L(-1) were obtained. DMSe and Se(IV) were found in several of the water samples analyzed at concentrations of 0.07-1.0 ng mL(-1).