H2-induced CO adsorption and dissociation over Co/Al2O3 catalyst

The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissociation. The H2 was adsorbed first, and activated to form H＊ over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH^＊, which reacted with adsorbed CO subsequently via CO^＊＋OH^＊ → CO2^＊＋H^＊; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO on the surface via CO^＊＋2H^＊ → CH^＊＋OH^＊. The formation of the surface species （CH） from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.     

EXAFS characterization of Ti/Al2O3 supports and Co/Ti/Al2O3 catalysts

The structure of Ti/Al₂O₃ supports (0–14 wt% Ti) and Co/Ti/Al₂O₃ catalysts (3 wt% Co) was examined by EXAFS. The results indicated that the Ti was present primarily as a highly dispersed surface phase. The Ti EXAFS results indicated that the Ti species were octahedrally coordinated. Evidence of Ti—Ti interactions was found for all loadings (2–14 wt% Ti) suggesting that the Ti surface species are present as small clusters of TiO₂.The Co EXAFS results showed evidence for several structurally different Co surface phases as a function of Ti loading. Evidence of a Co species interacting with the Ti surface phase was observed for the 3% Co/2% Ti-3%Co/6%Ti catalysts. At the highest loadings studied, 3%Co/8%Ti and 3%Co/14%Ti, evidence was found for a CoTiO₃-like phase.     

Mn/Al2O3 Systems: Structure and Activity

-Mn₂O₃ and KMn₈O₁₆ were detected on catalysts prepared by pore volume impregnation of -alumina using manganous nitrate and ammonium permanganate, respectively. While the surface texture was not remarkably affected: decomposition activities towards H₂O₂ and 2-propanol were higher for the later.     

New Gelation Process for Pt/Al2O3 Catalysts Preparation

Gel of platinum and aluminum was prepared by an anhydrous gelation process using a mixture of aluminum sec butoxid, platinum acetylacetonate and Butanol-2. The investigation of this gelation by FTIR, UV-vis and ²⁷Al NMR spectroscopies suggest that a slow polymerization of aluminum precursors occurs according to an etheration mecanism likely catalysed by metallic platinum which could be formed by the reduction of platinum in Pt(acac)₂ by sBuOH in the mixture during aging.     

The Effect of MoO3 Addition to V2O5/Al2O3 Catalysts for the Selective Catalytic Reduction of NO by NH3

The effect of MoO₃ addition to alumina supported vanadia catalysts on the catalytic activity for the selective catlaytic reduction of NO is investigated. Upon the addition of MoO₃, catalytic activity is enhanced and the particle size of V₂O₅ which is shown by the results of XRD and Raman spectroscopy is decreased. The MoO₃-V₂O₅/Al₂O₃ catalyst also exhibits more resistance to SO₂ deactivation than V₂O₅/Al₂O₃ does.     

Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

Hydrogenation of nitrate in water over bimetallic Pd-Ag/Al2O3 catalysts

Hydrogenation of nitrate (NO₃ ⁻) in water was studied with 0.8 ×10⁻³–3.2 ×10⁻³ mol/dm³ of reactant in the temperature range of 293–313 K over palladium promoted Ag catalysts. Pd-Ag catalysts with a low ratio of Ag/Pd were characterized by high efficiency in the reduction of nitrates. The degradation of nitrates followed approximately first order decay and the estimated apparent activation energy was about 4 kJ/mol.     

FT-IR photoacoustic spectra of the surface of Ru3(CO)12/Al2O3 system

The FT-IR photoacoustic spectra of Ru₃(CO)₁₂/Al₂O₃ (acidic and basic alumina) system have been measured for different ageing times. The behaviors of oxidation states of Ru on the surface of basic or acidic alumina and their difference are discussed on the ground of CO stretching bands of their spectra.     

Influence of ZrO2 on Carbon Monoxide Oxidation Over Pd/Al2O3

The influence of ZrO₂ on the properties of Al₂O₃ and performances of Pd/Al₂O₃ catalyst in CO oxidation have been investigated. TPD results show that the activity enhanced is due to the increase of the adsorptive capacity of CO and the activation of C=O bond after the introduction of ZrO₂.     

Determination of Equilibrium Dispersion of Pt on Al2O3 Support in Sintering Process

The variation of dispersion of Pt on Al₂O₃ support with sintering time is measured and the value of equilibrium dispersion of Pt is obtained directly. It is found that a General Power Law Expression can fit the experimental data well.     

阴极等离子体电解法制备氧化铝纳米颗粒

以金属铝为阴极材料,以3mol·L-1浓度的NH4NO3水溶液为电解液,采用非对称电极阴极等离子体电解方法制备出氧化铝纳米颗粒.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线能量色散谱(EDX)、X射线衍射(XRD)和X射线光电子能谱(XPS)对颗粒的形貌和结构进行了表征.结果表明颗粒以立方相Al2O3为主.还对放电过程的电流变化和发光现象进行了研究.结合实验结果提出了这种颗粒的生长机制.     

Effect of Preparation Conditions on the Stability of Pt/Al2O3 Catalysts in Methane Combustion

Alumina supported platinum catalysts were prepared by sol-gel method using aluminum-sec-butoxide, platinum acetylacetonate and sec-butanol. Various gelation process were performed either by the help of a gelation agent (water or acetic acid) or by a slow condensation without hydrolysis source. The textural and the structural study of the catalysts using the nitrogen physical adsorption and the hydrogen chemisorption showed that the BET surface area and the metal dispersion varied when the hydrolysis and the gelation processes were modified. The catalytic activities for methane combustion performed on the fresh and aged catalysts were correlated to the metal dispersion values. In addition the catalytic activity loss under reaction mixture seemed to be caused by the metal dispersion decrease. When the catalysts were aged under the reaction mixture at 600°C for 72 h, a BET surface area decrease and a metallic surface area loss were observed. The resistance to sintering observed to be dependant on the hydrolysis and the gelation processes was in favor of the catalyst prepared by acetic acid.     

Effect of sodium oxide doping on solid-solid interactions between V2O5 AND Al2O3

A V₂O₅/Al₂O₃ mixed solids sample was prepared with a molar ratio of 0.41 Na₂O (4 and 10 mol%) was added in the form of sodium nitrate prior to calcination in air in the temperature range 500–1000C. Solid-solid interactions between V₂O₅ and Al₂O₃ were studied using DTA and TG curves and their derivatives together with XRD techniques.The results obtained showed that Na₂O interacted with V₂O₅ at temperatures starting from 500C to yield a sodium/vanadium compound, Na_0.3V₂O₅ which remained stable and decomposed in part by heating at 1000C. V₂O₅ exists in orthorhombic and monoclinic forms in the case of pure mixed solids and those containing 4 mol% of Na₂O and preheated at 500C, and in monoclinic form in the case of the mixed solid doped with 10 mol% of Na₂O.Heating of pure and doped mixed oxide solids at 650C resulted in the conversion of most of the V₂O₅ into AlVO₄. Doping with sodium oxide enhanced the solid-solid interaction between V₂O₅ and Al₂O₃ at 650C to produce AlVO₄. The produced AlVO₄ decomposed completely on heating at 700C to form -Al₂O₃ and V₂O₅, (orthorhombic and monoclinic forms).The presence of Na₂O was found to decrease the relative intensity of the diffraction lines of -Al₂O₃ (corundum) produced at 750C which indicated some kind of hindrance of the crystallization process.Heating of pure and doped mixed solids at 1000C resulted in a further crystallization of acorundum together with V₂O₅ and sodium vanadate, Na_0.3V₂O₅. However, the intensities of diffraction lines relative to those of the sodium vanadium compound were found to decrease markedly by heating at 1000C, indicating partial thermal decomposition into vanadium and aluminium oxides.     

Devitrification Behavior of Calcium Phosphate Glasses Containing Al2O3 and SiO2 Additives

The effects of Al₂O₃ and SiO₂ additives on the crystallization of calcium phosphate glasses were studied. When the Al₂O₃ content was higher than 7 mol%, surface devitrification occurred in the glasses. However, for glasses with Al₂O₃ contents higher than 10 mol%, bulk devitrification predominanted. For the glasses with SiO₂, a surface devitrification mechanism predominanted. Non-isothermal DTA techniques were applied in order to establish the devitrification mechanism, and the kinetic parameters of crystal growth were obtained. The parameter m depends on the mechanism and morphology of devitrification of calcium phosphate, glass containing SiO₂ as additive, the values of m being lower than 1.2. These results indicate that the devitrification is controlled by the reaction at the glass-crystal interface, or occurs from surface nuclei. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Thermal Properties and Firing Characteristics of Zr/KClO4 Priming Compositions Containing Graphite,Fe2O3 and Al2O3 additives

Thermal decomposition of Zr/KClO₄ priming compositions containing different concentration of additives, such as graphite, Fe₂O₃ and Al₂O₃ have been studied by DSC/TG techniques. The firing characteristics of these primer mixtures have also been examined by Bruceton test and by adiabatic calorimeter. The results of these experiments suggest that strong interaction has been occurred between KClO₄ and Fe₂O₃ in the solid state. This revised version was published online in July 2006 with corrections to the Cover Date.     

纳米膜组装介孔Al2O3：合成及Pt/Al2O3的硝基苯催化加氢性能

以"乙酸乙酯(EA)-偏铝酸钠-水"体系在室温下合成了纳米膜组装介孔Al2O3。研究发现:合成反应时间、静置前搅拌时间、NaAlO2用量、EA用量及反应温度等对合成产物的形貌有影响;另外,与用商品γ-Al2O3制备的Pt/γ-Al2O3催化剂相比,纳米膜组装介孔Al2O3制备的Pt/Al2O3催化剂含有部分易被还原的PtOx物种。在硝基苯催化加氢反应中,用合成Al2O3为载体制备的Pt/Al2O3催化剂,比用商品γ-Al2O3制备的Pt/γ-Al2O3催化剂具有更好的催化活性。     

H2-induced CO adsorption and dissociation over Co/Al2O3 catalyst

The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissocia-tion. The H2 was adsorbed first, and activated to form H* over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH*, which reacted with adsorbed CO subsequently via CO*+OH* → CO2*+H*; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO onthe surface via CO*+2H* → CH*+OH*. The formation of the surface species (CH) from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.     

Synthesis of Diaryl Ethers Through the Copper-Catalyzed Arylation of Phenols with Aryl Iodides Using KF/Al2O3

An efficient synthesis of diaryl ethers by the copper-catalyzed arylation of phenols with a variety of aryl iodide susing KF/Al₂O₃ as a suitable base and CuI and 1,3 diphenyl-1,3 propandione as the catalyst is described.     

KF/Al2O3: Solid-Supported Reagent Used in 1,3-Dipolar Cycloaddition Reaction of Nitrile Oxide

The stereoselective synthesis of 2-isoxazolidine through 1,3-dipolar cycloaddition reaction of nitrile oxide, which is in situ generation from aldoxime in the presence of N-bromosuccinamide and solid-supported reagent KF/Al₂O₃ at room temperature, is reported. KF/Al₂O₃ is sufficiently basic such that it can replace organic bases such as Et₃N used in typical procedures and it catalyses the reaction to enhance the rate of the reaction.     

Improvement of high-voltage cycling behavior of Li(Ni1/3Co1/3Mn1/3)O2 cathodes by Mg, Cr, and Al substitution

To improve the electrochemical properties of Li[Ni_1/3Co_1/3Mn_1/3]O₂ at high charge end voltage (4.6 V), a series of the mixed transition metal compounds, Li(Ni_1/3Co_{1/3 − x} Mn_1/3M _x )O₂ (M = Mg, Cr, Al; x = 0.05), were synthesized via hydroxide coprecipitation method. The effects of doping Mg, Cr, and Al on the structure and the electrochemical performances of Li[Ni_1/3Co_1/3Mn_1/3]O₂ were compared by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy. The XRD results show that all the samples keep layered structures with R3m space group as the Li[Ni_1/3Co_1/3Mn_1/3]O₂. SEM images show that all the compounds have spherical shapes and the Cr-doped sample has the largest particle size. Furthermore, galvanostatic charge–discharge tests confirm that the Cr-doped electrode shows improved cycling performance than the undoped material. The capacity retention of Li(Ni_1/3Co_{1/3 − 0.05}Mn_1/3Cr_0.05)O₂ is 97% during 50 cycles at 2.8∼4.6 V. The improved cycling performance at high voltage can be attributed to the larger particle size and the prevention of charge transfer resistance (R _ct) increase during cycling.