Phenacyl dimethyl sulphonium ylide-mercuric chloride complex initiated radical polymerization of methylmethacrylate

Summary The metal-ylide-initiated radical polymerization of methylmethacrylate (MMA) at 85±0.1°C using dioxan as inert solvent was investigated by dilatometry. Kinetic parameters, average rate of polymerization (R _p ) and reaction orders with respect to initiator and monomer have been determined and are 0.33±0.1 and 1.33, respectively. Polymerization was inhibited by hydroquinone and non-polar solvents, but is favoured by polar solvent. The activation energy (E) and k _p ² /k_t values were 64.0 kJ mol^–1 and 3.3×10^–2 l mol^–1 s^–1 respectively. A suitable mechanism consistent with the observed kinetic data is proposed.     

On the Origin of the Heterogeneous Emission from Pyrene Sequestered Within Tetramethylorthosilicate-Based Xerogels: A Decay-Associated Spectra and O2 Quenching Study

Steady-state and time-resolved fluorescence spectroscopy are used to determine the local microheterogeneity surrounding pyrene molecules sequestered within tetramethylorthosilicate-derived xerogels. After compensation for the intrinsic background emission from the xerogel, we find that the pyrene intensity decay kinetics are best described by a two-term rate law. This is consistent with the pyrene molecules distributing primarily into two microenvironments. Under ambient conditions, the individual pyrene microenvironments exhibit excited-state fluorescence lifetimes that differ by 100 ns. However, the pyrene I₁ to I₃ band ratios that are associated with each microenvironment are statistically equivalent to one another. These results show that the local dipolarity surrounding these pyrene microenvironments are similar, but the decay rates associated with each microenvironment are very different. The longer-lived pyrene species (Environment #1) constitutes 1/2 of the total fluorescence and it exhibits an O₂ quenching sensitivity (K_sv1) of (5.19 ± 0.52 × 10^–3 %O₂ ^–1 and a bimolecular quenching constant (k_q1) of (2.30 ± 0.23) × 10⁴ %O₂ ^–1 s^–1. Environment #2, associated with the shorter-lived pyrene species, exhibits an O₂ quenching sensitivity (K_sv2) of (2.31 ± 0.16) × 10^–2 %O₂ ^–1 and a bimolecular quenching constant (k_q2) of (2.11 ± 0.23) × 10⁵ %O₂ ^–1 s^–1. These results are interpreted as follows: Environment #1 consists of pyrene molecules sequestered within a relatively rigid siloxane network wherein non-radiative decay pathways are lessened, but these pyrene molecules are not quenched readily by O₂. Environment #2 consists of pyrene molecules adsorbed onto surface silanols within the xerogel. These pyrene molecules are quenched by the silanols and they are simultaneously more accessible to O₂ compared to Environment #1.     

Solvent effect and temperature dependence in the interaction of singlet oxygen with α-phenyl-N-tert-butyl nitrone

The solvent effect on the quenching of singlet oxygen by -phenyl-N-tert-butyl-nitrone /PBN/ has been investigated by laser flash photolysis technique registrating luminescence kinetics of¹O₂. The values of the rate constant /k_q/ of the quenching were at 293 K: /9.0±0.4/×10⁶, /4.4±0.3/×10⁶ and /18.3±0.5/×10^{6 –}M^–1 s^–1 in toluene, chloroform and acetonitrile, respectively. The rate constant for the chemical interaction between¹O₂ and PBN, was k_r<1×10⁵ M^–1 s^–1k_q independently of the solvent. At temperatures between 223 and 293 K in toluene E_q=0.4±0.4 kJ mol^–1.     

Ambient temperature Atom Transfer Radical copolymerization of tetrahydrofurfuryl methacrylate and methyl methacrylate: Reactivity ratio determination

Tetrahydrofurfuryl methacrylate (THFMA), a heterocyclic monomer was polymerized by ambient temperature Atom Transfer Radical Polymerization (AT ATRP) using CuX/PMDETA/EBiB system. THFMA was found to undergo very rapid polymerization, in bulk. For a target DP > 200, bulk polymerization results in cross-linking as evidenced by (CH₂)_n,wag peaks (IR spectroscopy). Atom Transfer Radical copolymerization (ATRcP) of THFMA with MMA was performed and the reactivity ratios were calculated from the copolymer composition, as determined by ¹H NMR, using Fineman–Ross and Kelen–Tudos methods. The reactivity ratios determined for ATRP were found to be significantly different from the literature values for conventional free radical polymerization (CFRP). This may be due to the coordination of copper catalytic system with the oxygen atom of the tetrahydrofurfuryl group that could lead to the variation in reactivity ratios. ¹H NMR evidence for catalyst–monomer interaction is also provided.     

Polymerization of methyl methacrylate by charge-transfer mechanism with aliphatic primary amines and carbon tetrachloride

Polymerization of methyl methacrylate (MMA) with aliphatic primary amines and carbon tetrachloride has been investigated in th dimethylsulfoxide medium by employing a dilatometric technique at 60°C. The rate of polymerization (R_p) has been evaluated under the conditions, [CCl₄]/[amine] < 1 and > 1. The kinetic data indicate possible participation of the charge transfer complexes formed between the amine + CCl₄ and the amine + MMA in the polymerization of MMA. In the absence of CCl₄ or amine, no polymerization of MMA was observed under the present experimental conditions. The polymerization of MMA was inhibited by hydroquinone, indicating a free radical initiation. The energy of activation varied from 32 to 58 kJ mol^?1.     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

Flow-injection hydride generation atomic absorption spectrometric study of the automated on-line pre-reduction of arsenate, methylarsonate and dimethylarsinate and high-performance liquid chromatographic separation of their -cysteine complexes

An automated on-line pre-reduction of arsenate, monomethylarsonate (MMA) and dimethylarsinate (DMA) using flow injection hydride generation atomic absorption spectrometry (FI-HGAAS) is feasible. The kinetics of pre-reduction and complexation depend strongly on the concentration of -cysteine and on the temperature in the following increasing order: inorganic As(V)<DMA<MMA. Arsenate is pre-reduced/complexed within less than 50 s at 70–100°C compared to 1 h at room temperature, while MMA and DMA require 1.5–2 min at 70–100°C and up to 1–2 h at room temperature. The characteristic masses and concentrations for 100 μl injections are 0.01 ng and 0.1 μg l⁻¹ in integrated absorbance and 0.2 ng and 2 μg l⁻¹ in peak height measurements, and the limits of detection are ca. 0.5 ng and 5 μg l⁻¹, respectively. In a high-performance liquid chromatography (HPLC)–HGAAS system, the -cysteine complexes of inorganic As(III), MMA and DMA are best separated within 7 min by HPLC on a strongly acidic cation exchange column such as Spherisorb S SCX 120×4 mm (5 μm) with a mobile phase containing 12 mmol l⁻¹ phosphate buffer (KH₂PO₄/H₃PO₄)–2.5 mmol l⁻¹ -cysteine, pH 3.3–3.5. Upon dilution to -cysteine levels below 10 mmol l⁻¹, which are compatible with HPLC separations, the DMA–cysteine complex is unstable on storage. No baseline separations are possible with anion exchange and reverse phase C₁₈ HPLC columns. The limits of detection with 50 μl injections in peak area mode are ca. 0.5 ng and 10 μg l⁻¹, respectively.     

2‐[(Diphenylphosphino)methyl]pyridine as ligand for iron‐based atom transfer radical polymerization

2‐[(Diphenylphosphino)methyl]pyridine (DPPMP) was successfully used as a bidentate ligand in the iron‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with various initiators and solvents. The effect of the catalytic system on ATRP was studied systematically. Most of the polymerizations with DPPMP ligand were well controlled with a linear increase in the number‐average molecular weights (M_n) versus conversion and relatively low molecular weight distributions (M_w/M_n = 1.10–1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values. Initially added iron(III) bromide improved the controllability of the polymerization reactions in terms of molecular weight control. The ratio of ligand to metal influenced the controllability of ATRP system, and the optimum ratio was found to be 2:1. It was shown that ATRP of MMA with FeX₂/DPPMP catalytic system (X = Cl, Br) initiated by 2‐bromopropionitrile (BPN) was controlled more effectively in toluene than in polar solvents. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 56.7 KJ mol^?1. In addition, reverse ATRP of MMA was able to be successfully carried out using AIBN in toluene at 80 °C. Polymerization of styrene (St) was found to be controlled well by using the PEBr/FeBr₂/DPPMP system in DMF at 110 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2922–2935, 2008     

Polymerization of Methyl Methacrylate with Bis(Cyclopentadienyl)Titanium Dichloride in a Water-Methanol Mixture: Formation of Tetrahydrofuran-Insoluble Polymer

Abstract

Methyl methacrylate (MMA) was found to be effectively polymerized with bis(cyclopentadienyl)titanium dichloride (CP₂TiCl₂) in a water-methanol mixture (1:1, v/v). The polymerization proceeded heterogeneously because the resulting poly(MMA) was insoluble in the system. The rate (R _p) of the heterogenous polymerization was apparently expressed by R _p = k[Cp₂TiCl₂]²[MMA]^2˙5 (at 40°C). The resulting poly(MMA) was observed to consist of tetrahydrofuran (THF)-soluble and insoluble parts. In contrast with the usual radical poly(MMA), the THF-insoluble part was soluble in benzene, toluene, and chloroform but insoluble in polar solvents such as ethyl acetate, acetone, acetonitrile, dimethylformamide, and dimethylsulfoxide. The polymerization was found to be profoundly accelerated by irradiation with a fluorescent room lamp (15 W). The results of copolymerization of MMA and acrylonitrile indicated that the present polymerization proceeds through a radical mechanism.     

Photoinitiation. IV. The effect of lewis acid on the vinyl monomer polymerization photoinitiated by aromatic hydrocarbons

Polymerization of acrylonitrile photoinitiated by naphthalene, anthracene, phenanthrene, and pyrene is accelerated by an admixture of zinc (II) chloride, acetate, or nitrate. The effect of zinc (II) salts on the rate of pyrene-photoinitiated polymerization of acrylonitrile leads to an increase in this rate in the order Zn/OCOCH_3/2 < ZnCl₂ < Zn/NO_3/2. The maximum polymerization rate is achieved at the molar ratio [ZnCl₂]/([ZnCl₂] + [pyrene]) approximately 0.7. In contrast to the photoinitiated polymerization of acrylonitrile, the methyl methacrylate admixture of zinc (II) chloride exerts a smaller effect on the polymerization rate. In the pyrene-photoinitiated polymerization of styrene an admixture of zinc (II) chloride retards the polymerization rate. Fluorescence of aromatic hydrocarbon in the system acrylonitrile–aromatic hydrocarbon is efficiently quenched by zinc (II) chloride. Stern–Volmer constants determined for pyrene (80 dm³ mole^?1), phenanthrene (66 dm³ mole^?1), and naphthalene (49 dm³ mole^?1) are higher by about 2–3 orders of the Stern–Volmer constants for fluorescence quenching of aromatic hydrocarbons by acrylonitrile in the absence of ZnCl₂. The fluorescence of anthracene in acrylonitrile is not quenched by ZnCl₂. The acceleration effect of Zn (II) salts on the polymerization of acrylonitrile photoinitiated by aromatic hydrocarbons depends on two factors: an increase in the ratio of the rate constant of the growth and termination reactions, k_p/k_t, and an increase in the quenching constant of fluorescence of aromatic hydrocarbon, k_q, by the complex {acrylonitrile…ZnCl₂}. ZnCl₂ thus influences both the growth and initiation reactions of the polymerization process.     

Investigation of the spectral properties of a squarylium near-infrared dye and its complexation with Fe(III) and Co(II) ions

The spectral features of the squarylium near-infrared (NIR) dye NN525 in different solutions and its complexation with several metal ions were investigated. The absorbance maximum of the dye is λ=663 nm in methanol. This value matches the output of a commercially available laser diode (650 nm), thus making use of such a source practical for excitation. The emission wavelength of the dye in methanol is λ_em=670 nm. The addition of either Fe(III) ion or Co(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=2.70×10⁷ M⁻¹ for Co(II) ion. The K_SV value for Fe(III) ion could not be established due to the non-linearity of the Stern–Volmer plot and the modified Stern–Volmer plot for this ion. The detection limit is 6.24×10⁻⁸ M for Fe(III) ion and 1.55×10⁻⁵ M for Co(III) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 3.14×10⁶ M⁻¹ for the Fe–dye complex and 2.64×10⁵ M⁻¹ for the Co–dye complex.     

Hydroxoaquotetraminecobalt(III)-promoted hydrolysis of pyrophosphate. Mechanistic considerations

The hydrolysis of pyrophosphate was investigated at two different concentrations (10^–2 and 10^–3M) of [N₄Co(H₂O)(OH)]²⁺ [N₄=tn₂ or trpn (tn=trimethylenediamine, trpn=tris(3-aminopropyl)amine)] using two quenching methods (Eu^II/H⁺ and OH^–). The reaction was monitored by measurement of orthophosphate (Pi) in quenched aliquots of a reaction mixture consisting of the reagents added to a reaction mixture consisting of the reagents added to a preformed 1:1 pyrophosphate complex (tn₂CoPPi). The results are compared with similar findings in the literature for cyanide-quenched reaction mixtures. The reactive species with regard to hydrolysis was found to be a 3:1 N₄Co^III to PPi complex. Factors affecting the formation and degradation of this reactive species are discussed.     

Plasma chemical synthesis. II. Effect of wall surface on the synthesis of ammonia

The plasma synthesis of ammonia was stuided at pressures of 1–5 torr and flow rates of up to 200 torr cm³ min^–1 using Pyrex and silver surfaces cooled to 77 K. The N conversion to ammonia was about 13% in experiments in which the afterglow was trapped on the Pyrex surface. By quenching the plasma rather than the afterglow, the percent N conversion could be doubled using the Pyrex surface and quadrupled using the silver surface. Increasing the hydrogen pressure and/or hydrogen discharge cleaning decreased the percent N conversion; nitrogen discharge conditioning had no significant effect. With increasing nitrogen flow rate the percent N conversion decreased linearly in the quenched plasma reaction on the silver surface, suggesting nitriding and reduction by hydrogen to form ammonia. The exponential decrease of the percent N conversion in the quenched afterglow reaction on the Pyrex surface is explained by the formation and/or dissociation of adsorbed N₂ determining the ammonia yield at 77 K.     

Electrophysical properties of metal nitrate complexes with polyacrylamide

The electrophysical characteristics of metallopolymers obtained by spontaneous polymerization of complexes of Er, Ca, and UO₂ nitrates with acrylamide were investigated. The conductivity () at direct current was measured (10^–5 to 10^–6 Ohm^–1 cm^–1), and its alterations during the polymerization were observed. The conductivity of the metallopolymers obtained depends essentially on the voltage applied during the polymerization and the component ratio in the original mixture. It is concluded that the conductivity is ionic in character. The conductivity and the electret properties discovered depend on the moisture content of the samples.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 865–867, May, 1994.     

Electron transfer in the photochemical reactions of phenothiazine with halomethanes

Photochemical transformations of phenothiazine (PTA) in solutions of halomethanes CH_nX_4–n (X = Cl, Br; n = 0, 1, 2) and in n-hexane—CH_nX_4–n mixtures under the irradiation with = 337 and 365 nm were studied. The rate constants of quenching of PTA fluorescence with halomethanes (k _q) are 4·10⁵—1.3·10¹⁰ L mol^–1 s^–1. The process occurs due to electron transfer with the C—X bond cleavage in the radical anion fragment of the primary radical ion pair. This results in the formation of the stable radical cation salt (PTA^·+X^–). The plot of k _q vs. free energy of electron transfer corresponds to the Rehm—Weller empirical equation for a one-electron process and is satisfactorily described in terms of the theory of nonradiative electron transitions in the approximation of one quantum vibration.     

Spectroscopic and Molecular Docking Approaches for Investigation of Interaction of Phellopterin with Human Serum Albumin

The mechanism of interaction between human serum albumin (HSA) and natural product phellopterin (PL) from Angelica dahurica was investigated by spectroscopic techniques with molecular docking under simulated physiological conditions. The experimental results showed that the fluorescence of HSA was regularly quenched by PL, and the quenching constants (K_SV) decreased with increasing temperature, which indicated that the quenching mechanism was a static quenching procedure. The binding constants (K_A) were larger than 10^?5 M^?1 and the number of binding sites (n) was approximate to 1 at different temperatures, which indicated that the binding affinity was hige and there was just one main binding site in HSA for PL. According to thermodynamic parameters from Van't Hoff equation, the binding process of PL with HSA was spontaneous and exothermic process due to ΔG < 0, and the electrostatic force played major role in the binding between PL and HSA according to ΔH < 0 and ΔS > 0. The binding distance (r) was calculated to be about 3.35 nm, which implied that the energy transfer from HSA to PL occurred with high possibility according to the theory of Förster's non-radiation energy transfer. The microenvironment and conformation of HSA changed with the addition of PL based on the results of synchronous and three-dimensional fluorescence methods. The molecular docking analysis revealed the binding locus of PL to HSA in subdomain IIIA (Sudlow's site II).     

Quenching of the fluorescence of riboflavin by the histidinates and alaninates of nickel,copper, and zinc

The formation of complexes of histidinates and alaninates of Ni(II), Cu(II), and Zn(II) with riboflavin (RF) in the ground state and the quenching of the fluorescence of RF by these compounds has been investigated. It has been found that the quenching of the fluorescence of RF by the Cu²⁺ and Ni²⁺ complexes is caused mainly by the nonemissive energy transfer from the donor (RF) to the metal ions. In the case of the Cu²⁺, Ni²⁺, and Zn²⁺ histidinates the formation of nonfluorescing unstable complexes (K_stab — 3–10) of the metal histidinates with RF in the ground state also contribute to the quenching. Free histidine and zinc histidinate quench the fluorescence of RF by the transfer of an electron to the excited molecule of the flavin with the formation of nonfluorescing reduced RF.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 4, pp. 488–493, July–August, 1985.     

Triplettlöschung durch Chrom(III)-Komplexe

Zusammenfassung Die Löschung der Triplett-Triplett-Absorption von aromatischen Kohlenwasserstoffen und von Eosin wurde blitzlichtspektroskopisch untersucht. Für die Löschkonstanten von Chromkomplexen wurden Werte von 5,7·10⁶ bis 1,3·10⁹ lMol^–1 sec^–1 gefunden. Sie hängen von der Ionenladung des Chromkomplexes ab. Die Triplett-Triplett-Absorption von Naphthazen wird von K₃[Cr(CN)₆] nicht beeinflußt. Als Löschmechanismus wird Dipol-Quadrupol-Resonanz-Energieübertragung angenommen.

---

Quenching of triplet-triplet-absorption by chromium(III) complexes

The quenching of triplet-triplet-absorption of aromatic hydrocarbons and cosine was studied by means of flash spectroscopy. Second order quenching constants of chromium complexes were found to range from 5.7·10⁶ to 1.3·10⁹mol^–1 sec^–1. The values depend on the charge of the chromium complex. Naphthacene triplet-triplet-absorption is not quenched by K₃[Cr(CN)₆]. The quenching mechanism is supposed to be a dipole-quadrupole-energy transfer.

---

Résumé L'extinction de l'absorption triplet-triplet des hydrocarbures aromatiques et de l'éosine a été étudiée au moyen de la spectroscopie de flash. Les constantes d'extinction du second ordre des complexes du chrome ont été trouvées entre 5.7 10⁶ à 1.3·10⁹ l mol^–1 sec^–1. Les valeurs dépendent de la charge du complexe. L'absorption triplet-triplet du nephtacène n'est pas éteinte par K₃[Cr(CN)₆]. Le mécanisme d'extinction est sans doute un transfert d'énergie dipole-quadrupole.

---

---

Dem Andenken von Herrn Professor Hans-Ludwig Schläfer gewidmet.

---

Wir danken der Max-Kade-Stiftung für finanzielle Unterstützung.     

Influence of Excitation of the Lanthanide 4 fShell on Complexation with Organic Substrates in Solutions: 2. Isotope Effects in Complexation of Tris(heptafluorodimethyloctanedionato)europium(III) with Dimethyl Sulfoxide in Benzene Solutions

The effect of deuteration of dimethyl sulfoxide on the fluorescence quantum yield, temperature quenching of fluorescence, and its complexation with tris(heptafluorodimethyloctanedionato)europium(III) (Eu(fod)₃) in the ground and excited states was studied. It was found that excitation of f–ftransitions in Eu(III) increases the stability of Eu(fod)₃complexes with sulfoxides but has a very insignificantly influence on isotope effects. The deuterium effect is displayed to a small extent in altering the quantum yield and is accompanied by a decrease in the efficiency of temperature quenching of Eu(fod)^* ₃fluorescence.     

Vinyl polymerization. 364. Polymerization of methyl methacrylate initiated with benzaldehyde

Benzaldehyde (PhCHO) is found to be able to initiate the radical polymerization of methyl methacrylate (MMA). The rate of polymerization is expressed by the following equation: R_p = const[PhCHO]^0.5[MMA]^1.5. The overall activation energy is estimated to be 56.3 kJ mole^?1. The mechanism of polymerization is discussed.