Poly(oxyethylene) based surface coatings for poly(dimethylsiloxane) microchannels

Control of surface properties in microfluidic systems is an indispensable prerequisite for successful bioanalytical applications. Poly(dimethylsiloxane) (PDMS) microfluidic devices are hampered from unwanted adsorption of biomolecules and lack of methods to control electroosmotic flow (EOF). In this paper, we propose different strategies to coat PDMS surfaces with poly(oxyethylene) (POE) molecules of varying chain lengths. The native PDMS surface is pretreated by exposure to UV irradiation or to an oxygen plasma, and the covalent linkage of POE-silanes as well as physical adsorption of a triblock-copolymer (F108) are studied. Contact angle measurements and atomic force microscopy (AFM) imaging revealed homogeneous attachment of POE-silanes and F108 to the PDMS surfaces. In the case of F108, different adsorption mechanisms to hydrophilic and hydrophobic PDMS are discussed. Determination of the electroosmotic mobilities of these coatings in PDMS microchannels prove their use for electrokinetic applications in which EOF reduction is inevitable and protein adsorption has to be suppressed.     

Obtaining nanocomposites of polyamide 6 and cellulose whiskers via extrusion and injection molding

Nanocomposites of polyamides with cellulose whiskers are difficult to obtain by conventional processing of extrusion and injection molding because of the low thermal stability of the cellulosic nanostructures and the relatively high processing temperature of polyamides, which is higher than the temperature of thermal degradation of cellulose whiskers. Thus, in this study cellulose whiskers were coated with polyamide 6 (PA6) in order to increase their thermal stability and prevent the formation of agglomerates. This coating on cellulose whiskers allows their application to obtain nanocomposites with polyamides, whose processing temperatures are relatively high, around 250 °C. Cellulose whiskers (CWs) were obtained from cotton fibers by acid hydrolysis. The freeze-dried CWs were coated with PA6 by dispersing them in formic acid; PA6 was solubilized in this suspension. The cellulose-coated whiskers (CCWs) were characterized by X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetry (TG), scanning electron microscopy (SEM-FEG) and infrared spectroscopy. SEM-FEG and TG results showed that the PA6 coating on CWs prevented high agglomeration of dried CWs and promoted an increase in their thermal stability from 180 to 280 °C, allowing the use of CCWs to obtain nanocomposites with PA6 using conventional processing routes, such as extrusion and injection molding, at appropriate processing temperatures. In this way, 1 wt% CCWs was used to prepare nanocomposites with PA6. The PA6 + 1CW nanocomposites were compared to neat PA6 without CWs. The samples were characterized by tensile tests and DSC, and the results showed that the PA6 coating on CWs was effective in raising the thermal stability of CWs, improving the dispersion of CWs in the matrix of PA6, resulting in a 45 % increase in the elastic modulus of the nanocomposite with only 1 wt% of coated cellulose whiskers in comparison to neat PA6.     

Poly(lactic acid)‐based nanocomposites

Classic plastics accumulate in nature causing environmental pollution, yet as a counterbalance they benefit society in many ways. They are versatile, cost‐effective, and can be tailored to have desired properties. The global environment has led to the fabrication of commodity plastics from environmentally degradable polymers. Poly(lactic acid) (PLA) is the most promising among the environmentally friendly polymers available. PLA‐based plastics have mechanical, thermal, and transparency similar to traditional plastics, and they can be molded and fabricated using the same equipment and procedures. Their material properties are enhanced through nanocomposites, compatibilizers, plasticizers, and other fillers (flame retardant, ultraviolet filter, etc.). This review summarizes mass production techniques and property reinforcements (focusing on nanocomposites and plasticizers) for PLA‐based plastics for commodity use. Copyright © 2016 John Wiley & Sons, Ltd.     

Poly(lactic acid)/organoclay nanocomposites: Thermal,rheological properties and foam processing

In this study, polymer nanocomposites based on poly(lactic acid) (PLA) and organically modified layered silicates (organoclay) were prepared by melt mixing in an internal mixer. The exfoliation of organoclay could be attributed to the interaction between the organoclay and PLA molecules and shearing force during mixing. The exfoliated organoclay layers acted as nucleating agents at low content and as the organoclay content increased they became physical hindrance to the chain mobility of PLA. The thermal dynamic mechanical moduli of nanocomposites were also improved by the exfoliation of organoclay; however, the improvement was reduced at high organoclay content. The dynamic rheological studies show that the nanocomposites have higher viscosity and more pronounced elastic properties than pure PLA. Both storage and loss moduli increased with silicate loading at all frequencies and showed nonterminal behavior at low frequencies. The nanocomposites and PLA were then foamed by using the mixture of CO₂ and N₂ as blowing agent in a batch foaming process. Compared with PLA foam, the nanocomposite foams exhibited reduced cell size and increased cell density at very low organoclay content. With the increase of organoclay content, the cell size was decreased and both cell density and foam density were increased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 689–698, 2005     

Poly(vinyl chloride)-paste/clay nanocomposites: Investigation of thermal and morphological characteristics

The paper concentrates on poly(vinyl chloride) - PVC - from the point of nanocomposite characterisation through thermal degradation of samples, evolution of the changes caused by elevating temperature using TGA, FTIR and Congo Red methods combined with morphological characterisation by XRD and TEM analyses. A novel method of PVC-paste/nanocomposite preparation while processing was used. During preparation, PVC plasticizer was mixed with clay, both natural and organophilic, and the suspension was then compounded with the other components. Two factors were followed: effect of shearing alone, and in combination with temperature. As is presented, the type of nano-filler and its chemical modifier have obvious influence on final properties either thermal or morphological. Presented contribution follows previous part of investigation and brings further information from PVC-paste/nanocomposite field.     

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

Micellisation and gelation of block-copoly(oxyethylene/oxybutylene/oxyethylene) E58 B17 E58

A triblock-copoly(oxybutylene/oxyethylene), denoted E₅₈ B₁₇ E₅₈ (80 wt-% E), was prepared by sequential anionic copolymerisation and its micellar and gelation properties in aqueous solution were determined. The oxybutylene/oxyethylene copolymer had the advantage over comparable oxypropylene/oxyethylene copolymers of greater uniformity of composition and chain length. The methods generally used were surface tension, light scattering intensity, photon correlation spectroscopy, together with observation of gelation. Measurements were made at 30°, 40° and 55° C over a full concentration range from dilute solution into the gel (>200 g dm^–3) and at specified concentrations, including the gel, over the temperature range from 10° to 70° C. The lower and upper temperature boundaries of the gel region were identified, and the occurrence of syneresis was noted. The properties investigated and discussed include critical micelle and gel concentrations, micellar weights and sizes, and structures and mobilities in the gel.     

纳米V2O5／ZnO光催化剂对壬基酚聚氧乙烯醚降解的催化活性

采用氨浸法制备了不同V2O5含量的纳米V2O5/ZnO光催化剂,并用X射线衍射、比表面积测定、透射电镜、X射线光电子能谱和漫反射紫外-可见光谱测定了催化剂的晶型、比表面积、形貌尺寸、表面组成和光谱特征.以壬基酚聚氧乙烯醚(NPE-10)为模型污染物,分别在紫外光和可见光照射下考察了光催化剂的催化活性.结果表明,随着V2O5含量的增加,V2O5/ZnO的粒径逐渐减小,比表面积逐渐增大.与纳米ZnO样品相比,V2O5/ZnO中V2p的结合能减小,而Zn2p和O1s的结合能增大,V2O5/ZnO表面的羟基氧和吸附氧含量增加.n(V)/n(Zn)=2·5%的V2O5/ZnO光催化剂样品的催化活性最高(在紫外光和可见光照射3h后,NPE-10降解率分别约为79%和62%).     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Effect of extrusion and photo-oxidation on polyethylene/clay nanocomposites

Polyethylene (a 1:1 blend of m-LLDPE and z-LLDPE) double layer silicate clay nanocomposites were prepared by melt extrusion using a twin screw extruder. Maleic anhydride grafted polyethylene (PEgMA) was used as a compatibiliser to enhance the dispersion of two organically modified monmorilonite clays (OMMT): Closite 15A (CL15) and nanofill SE 3000 (NF), and natural montmorillonite (NaMMT). The clay dispersion and morphology obtained in the extruded nanocomposite samples were fully characterised both after processing and during photo-oxidation by a number of complementary analytical techniques. The effects of the compatibiliser, the organoclay modifier (quartenary alkyl ammonium surfactant) and the clays on the behaviour of the nanocomposites during processing and under accelerated weathering conditions were investigated. X-ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy (SEM), rheometry and attenuated reflectance spectroscopy (ATR-FTIR) showed that the nanocomposite structure obtained is dependent on the type of clay used, the presence or absence of a compatibiliser and the environment the samples are exposed to. The results revealed that during processing PE/clay nanocomposites are formed in the presence of the compatibiliser PEgMA giving a hybrid exfoliated and intercalated structures, while microcomposites were obtained in the absence of PEgMA; the unmodified NaMMT-containing samples showed encapsulated clay structures with limited extent of dispersion in the polymer matrix. The effect of processing on the thermal stability of the OMMT-containing polymer samples was determined by measuring the additional amount of vinyl-type unsaturation formed due to a Hoffman elimination reaction that takes place in the alkyl ammonium surfactant of the modified clay at elevated temperatures. The results indicate that OMMT is responsible for the higher levels of unsaturation found in OMMT-PE samples when compared to both the polymer control and the NaMMT-PE samples and confirms the instability of the alkyl ammonium surfactant during melt processing and its deleterious effects on the durability aspects of nanocomposite products. The photostability of the PE/clay nanocomposites under accelerated weathering conditions was monitored by following changes in their infrared signatures and mechanical properties. The rate of photo-oxidation of the compatibilised PE/PEgMA/OMMT nanocomposites was much higher than that of the PE/OMMT (in absence of PEgMA) counterparts, the polymer controls and the PE–NaMMT sample. Several factors have been observed that can explain the difference in the photo-oxidative stability of the PE/clay nanocomposites including the adverse role played by the thermal decomposition products of the alkyl ammonium surfactant, the photo-instability of PEgMA, unfavourable interactions between PEgMA and products formed in the polymer as a consequence of the degradation of the surfactant on the clay, as well as a contribution from a much higher extent of exfoliated structures, determined by TEM, formed with increasing UV-exposure times.     

Poly(styrene-co-acrylonitrile) based proton conductive membranes

Sulfonated poly(styrene-co-acrylonitrile) (PSAN–SO₃H) membranes were obtained by sulfonation of the original styrene–acrylonitrile copolymer, in different molar ratios, and characterized by vibrational spectroscopy (FTIR), thermal analyses (TGA and DSC) and electrochemical impedance spectroscopy (EIS). The thermal stability of the sulfonated polymers exhibited a dependence on the sulfonation degree and reached 261 °C for samples up to 1:4 (sulfonating agent to styrene unit). FTIR spectra showed the covalent incorporation of sulfonic groups at the styrene units, confirming the PSAN–SO₃H formation. Vibrational spectra also indicated the presence of hydronium ions and dissociated sulfonic groups, indicating the existence of mobile protons for ion conduction. DSC analyses evidenced two glass transition temperatures (T_g), one associated with an ion-water domain and other with the chain backbone glass transition. The maximum conductivity of PSAN–SO₃H membranes at ambient temperature was about 10⁻³ Ω⁻¹ cm⁻¹, achieving 10⁻² Ω⁻¹ cm⁻¹ at 80 °C. The conductivity dependency on the temperature was found to be linear, similarly to other sulfonic acid polymers described on the literature, and the water uptake reaches 45.7% of the polymer mass, against 18.9% of the original copolymer.     

Chlorinated polyethylene/layered silicate nanocomposites: Poly(ε-caprolactone)-based “masterbatch” approach

Chlorinated polyethylene (CPE)/organophilic-montmorillonite (Cloisite^®30B (CL30B)) nanocomposites have been prepared by melt intercalation using (poly(ε-caprolactone), (PCL)) as CPE/clay compatibilizer. Actually, a high clay content masterbatch-based on PCL was first produced and then dispersed by melt blending within CPE. CPE/CL30B nanocomposites was also prepared by direct blending of CPE with CL30B for sake of comparison. All the composites were characterized by wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM). The thermal stability of the nanocomposites was analyzed by thermogravimetric analysis (TGA) while the mechanical properties were assessed by tensile testing. When using low molecular mass PCL chains as compatibilizer, the nanocomposites displayed a rather intercalated structure but their ultimate properties remained unchanged whereas with high molecular weight PCL chains, clay delamination was favoured and led to an increase of both thermal and mechanical properties of the resulting nanocomposites.     

Amphiphilic Comb‐Like Poly(oxyethylene) and Its Complexes with LiClO4: Synthesis and Mesomorphic Behavior

Summary: We prepared an amphiphilic, comb‐like poly(oxyethylene) containing decyl‐tri(oxyethylene) amphiphiles in the side chain using a polymer analogous reaction to obtain a novel nonionic amphiphilic polymeric system with high molecular weight. The amphiphilic comb‐like poly(oxyethylene) itself only showed a side‐chain crystalline phase below its melting temperature of −31 °C. When the polymer was mixed with lithium perchlorate, a smectic liquid‐crystalline phase appeared. The ordered phases of the polymer and the polymer mixture were studied by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction.

POM image (200 X) of D3OTP1 at room temperature.     

Poly(styrene-block-isoprene) nanocomposites: Kinetics of intercalation and effects of copolymer on intercalation behaviors

In addition to phase morphology, diffusion, and dynamics in the bulk, the behavior of block copolymers in the confined state has been of great interest. Although random and graft copolymers have been used in polymer-layered silicate nanocomposites, well-defined block copolymers have received relatively little attention. In this study, the kinetics of intercalation of a series of poly(styrene-b-isoprene) block copolymers into a layered silicate were examined via X-ray diffraction. Intercalation was observed even when the copolymer was in the ordered state, with no discontinuity around the order–disorder transition of the copolymer. As the size of the polystyrene block was increased, slower intercalation kinetics were observed, possibly because of the increased glass-transition temperature of the polystyrene segment. Finally, the clearing temperature of the copolymer in the nanocomposites as measured by small-angle X-ray scattering showed a large heating-rate dependence suggesting that the nanoparticles act as kinetics barriers to the disordering of the copolymer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3264–3271, 2003     

Hybrid nanocomposites: Poly(chloromethyl-), poly(methyl-), poly(phenylsilsesquioxane)-nitrogen polybase

Formation of nanocomposites in the sol-gel systems RSiX₃ [R = CH₃ (I), C₆H₅ (II), X = Cl; R = ClCH₂ (III), X = OC₂H₅]-polyvinylazole [(-CH₂-C(Y)H-) _n , Y = pyrazolyl, imidazolyl, 4-pyridinyl, 2-methyl-5-pyridinyl], and also I-1-vinyl-4,5,6,7,-tetrahydroindole using was studied. The composition and structure of the resulting nanocomposites were analyzed.     

用SAXS/WAXS研究聚氧乙烯/聚氧丁烯嵌段共聚物在n-己烷中的结晶性球形胶束结构

嵌段共聚物在选择性溶剂中能够自组装形成胶束,胶束的不同形状与嵌段共聚物的结构、溶剂和浓度有关．无定形嵌段共聚物通常形成球形胶束,在某些情况下也可以形成其它形状的胶束,关于结晶性嵌段共聚物在无定形链段选择性溶剂中的胶束结构和形状的报道非常少．由于结晶和相似相溶两种作用力的竞争,使得这类胶束的形状丰富多变．通常结晶作用较强时,结晶性嵌段共聚物形成片状的胶束,当结晶组分比较少时,可形成棒状胶束,尽管理论上已经指出存在球形胶束,但尚无关于这方面的报道。     

Poly(N-vinylcaprolactam) nanocomposites containing nanocrystalline cellulose: a green approach to thermoresponsive hydrogels

In this work, we report on the synthesis and characterization of thermoresponsive poly(N-vinylcaprolactam), PNVCL, nanocomposite hydrogels containing nanocrystalline cellulose (CNC) by the use of frontal polymerization technique, which is a convenient, easy and low energy-consuming method of macromolecular synthesis. CNC was obtained by acid hydrolysis of commercial microcrystalline cellulose and dispersed in dimethylsulfoxide. The dispersion was characterized by TEM analysis and mixed with suitable amounts of N-vinylcaprolactam for the synthesis of PNVCL nanocomposite hydrogels having a CNC concentration ranging between 0.20 and 2.0 wt%. The nanocomposite hydrogels were analyzed by SEM and their swelling and rheological features were investigated. It was found that CNC decreases the swelling ratio even at small concentration. The rheological properties of the hydrogels indicated that CNC strongly influenced the viscoelastic modulus, even at concentrations as low as 0.1 wt%: both G′ and G″, and the viscosity increase with CNC content, indicating that the nanocellulose has a great potential to reinforce PNVCL polymer hydrogels.     

Osmotic Coefficients of Aqueous Solutions of Some Poly(oxyethylene) Glycols at the Freezing Point of Solution

Summary. The freezing temperatures of dilute aqueous solutions of some poly(oxyethylene) glycols (PEG, HO–(CH₂CH₂O) _n –H, n varying from 4 to 117) were measured over a solute to solvent mass ratio from 0.0100 to 0.3900. The second and third osmotic virial coefficient (A ₂₂ and A ₂₂₂) of poly(oxyethylene) glycols in aqueous solution were determined. The molecular weight dependence of the second virial coefficient can be described by a simple relation A ₂₂=2×10^–5 M _n ^1.86, and the third virial coefficient is A ₂₂₂=0.038A ₂₂ ². The activity coefficients of the solute were calculated using the Gibbs-Duhem equation as applied by Bjerrum. From the osmotic and activity coefficients the excess Gibbs energies of solution, as well as the respective partial molar functions of solute and solvent and the virial pair interaction coefficients for the excess Gibbs energies were estimated. The second and the third osmotic virial coefficients are correlated with the Mc-Millan-Mayer virial coefficients.