DOE effect on BER performance in MSK space uplink chaotic optical communication

With the increasing demand for space optical communication security, space chaotic optical communication has attracted a great amount of attention. Compared with traditional space optical communication, a chaotic optical communication system has a higher bit error rate(BER) for its complex system design. In order to decrease the BER of space chaotic optical communication systems, we introduce two diffractive optical elements(DOEs)at a transmitting terminal(Tx). That is because the commonly used reflective optical antenna at Tx blocks the central part of the transmission beam, which leads to a great amount of power consumption. Introducing the DOEs into the optical subsystem at Tx can reshape the transmission beam from a Gaussian distribution to a hollow Gaussian distribution so that the block of the secondary mirror in the reflective optical antenna can be avoided. In terms of the DOE influence on communication quality, we give a BER model based on a minimumshift-key(MSK) space uplink chaotic optical communication system to describe the DOE function. Based on the model, we further investigate the effect of the DOEs through analyzing the BER relationship versus basic system parameters based on the BER model. Both different mismatch conditions of chaotic systems and different atmospheric turbulence conditions are considered. These results will be helpful for the scheme design of space uplink chaotic optical communication systems.     

Study of disorder-order transitions in FexAl1−x binary alloys using the augmented space recursion based orbital peeling technique

In this communication we propose a method for the study of disorder-order transitions in Fe_xAl_1−x binary alloys. We turn to our earlier development [1] of a combination of the recursion method introduced by Haydock et al. [2] and our augmented space approach [3] with the orbital peeling technique proposed by Burke [4] to determine the small energy differences required in obtaining the pair energies which go as input to the generalized perturbation technique [5] of studying disorder-order transitions.     

Influence of reflector temperature gradients on bit-error rate in periscope laser communication systems in the presence of detector noise and platform vibrations

We consider the influence of thermal deformations of elliptic reflectors in periscope laser communication terminals on the bit-error rate (BER) taking into account the satellite-platform vibrations and the detector noise. We study the relationship between the average BER and temperature gradients of elliptic reflectors in inter-satellite laser communication systems at different values of the light beam wavelength and truncation rate, and different vibration amplitudes. The average BER increases with increase in the vibration amplitude, and it is noteworthy that the average BER increases with increase in the beam truncation rate, which contradicts the result obtained in [1] without taking noise into account. We find that for some temperature gradients there is an optimum communication wavelength that provides the minimum average BER. We use the back-fixing method for fixing the elliptic reflectors, which has proved to be much less sensitive to temperature gradients compared to the traditional around-fixing method by a press board.     

A Generalized Spatial Modulation System Using Massive MIMO Space Time Coding Antenna Grouping

Massive multiple input multiple output (MIMO), also known as a very large-scale MIMO, is an emerging technology in wireless communications that increases capacity compared to MIMO systems. The massive MIMO communication technique is currently forming a major part of ongoing research. The main issue for massive MIMO improvements depends on the number of transmitting antennas to increase the data rate and minimize bit error rate (BER). To enhance the data rate and BER, new coding and modulation techniques are required. In this paper, a generalized spatial modulation (GSM) with antenna grouping space time coding technique (STC) is proposed. The proposed GSM-STC technique is based on space time coding of two successive GSM-modulated data symbols on two subgroups of antennas to improve data rate and to minimize BER. Moreover, the proposed GSM-STC system can offer spatial diversity gains and can also increase the reliability of the wireless channel by providing replicas of the received signal. The simulation results show that GSM-STC achieves better performance compared to conventional GSM techniques in terms of data rate and BER, leading to good potential for massive MIMO by using subgroups of antennas.     

Band structure and one-dimensional density-of-states of US

The compound US is studied by a non-magnetic self-consistent fully relativistic band structure technique based on the formalism of the Korringa-Kohn-Rostocker method and on the local-density fit of Hedin and Lundqvist. In addition to the band structure results one-dimensional densities-of-states along the [100], [110] and [111] direction in reciprocal space are presented. These quantities should be comparable to measurements applying the angular resolved photoemission.     

Time-domain analysis of lossy coupled transmission lines

A new approach, based on the waveform relaxation technique and fast Walsh transform, is first presented for the analysis of lossy coupled transmission lines (LCTL) with arbitrary terminal networks. The simulation accuracy of the new method can be greatly improved, the disadvantage which always exists in previous methods [1]–[7] can be avoided and a considerable saving in time and memory of CPU is obtained.     

Turbo Codes for 10-66GHz WiMax Systems

In this paper, performances of turbo codes for 10-66GHz WiMax system are analyzed and simulated. The channel of WiMax system is modeled as Rician channel due to the short wavelength. The uniform interleaver is used in the performance analysis to derive the average upper bound of performance of turbo codes. Simulations of bit error rate (BER) performances are performed for WiMax systems with/without turbo codes. It is shown that about 4.3dB coding gain can be achieved by using a [1,11/13,15/13] turbo code with 5 iterations, and thus the required transmission power of WiMax system can be decreased. It is also demonstrated that the performances of turbo codes are improved by increasing the interleaver length and the iteration number.     

Improvement of the bit error rate of a non-coherent OCDMA system for FTTH network applications

In this paper, an optical code division multiple access (OCDMA) system was analysed to improve the bit error rate (BER) performance at 10 Gbps. The improvements to this system were based on a modified double weight code and a NAND subtraction technique and aimed to support the large number of active users in the fibre-to-the-home network. The system performance was investigated through extensive theoretical and numerical simulation analyses. The theoretical and simulation results revealed that the new detection technique exhibits improved BER performance compared to conventional techniques, such as complimentary subtraction techniques. The system performance was characterised by the signal-to-noise ratio, the bit error rate (BER), and various transmit powers ( $P_{sr} - 10$  dBm). The results show that the proposed system, which is based on a new detection technique, can achieve the optimal BER with a high number of users and maintains the error floor transmission rate $(\le 10^{-9})$ .     

无线光链路快速同步技术

介绍了一种小型无线激光通信系统的硬件结构以及针对该硬件的物理层收发协议。具体阐述了该协议中采用的快速同步技术,该技术能够降低通信终端间同步过程中的带宽浪费。在硬件结构中,主要介绍了激光驱动系统、信号放大和整形系统以及信号接口。硬件相关的物理层协议主要用于外部信号接口、数据流的串行化和解串行化、传输错误在线检测以及传输调度。系统主要针对地基无线光通信设计,使用多相位采样技术在本地生成接收端的采样时钟,与基于PLL的时钟复原方法相比具有更快的同步速度,有效提高了无线光通信系统的带宽利用率,降低了通信误码率。     

空间光通信中基本振动对误码率的影响分析

在探讨卫星振动对空间光通信系统误码率所产生的影响时，有必要分析不同振动类型的影响问题。为了使讨论简单，本文主要侧重对正弦振动进行分析。分析结果表明，当振动持续时间为整周期时，误码率仅为振幅的函数，此时误码率随振幅的增加迅速上升，而与振动频率无关；当振动持续时间为非整周期时，误码率随时间的增加而波动，波动的起伏逐渐减小，误码率趋于仅与振幅有关的常数。该项工作为今后研究卫星复杂振动对空间光通信的影响打下了基础，同时也为研究对卫星振动影响的补偿分析提供了有意义的参考     

Experiment on 60-GHz MMW transmission performance in an optical fiber and wireless system

We experimentally investigate the transmission performance of 60-GHz signals over standard single-mode fiber (SSMF) and wireless links at different bit rates. Experimental results show that in a transmission of over 10-km SSMF and 1.3-m wireless link, bit rate reaches up to 5 Gb/s and bit error rate (BER) is less than 10 4 . The main limiting factor in such radio-over-fiber (ROF) systems is intersymbol interferences caused by the so-called walk-off effect when BER is below 10 8 . In addition, a transmission of over 20-km SSMF without chromatic dispersion compensation is briefly investigated. For a BER of 10 8 , the optical penalty is 2 dB.     

Design and implementation of 2-dimensional wavelength/time codes for OCDMA

In this paper, two-dimensional (2D) wavelength/time codes are designed and implemented. The 2D codes are constructed by a technique based on folding of Golomb rulers. The performance evaluation of OCDMA system based on wavelength/time code has been analyzed by measuring the values of bit error rates and eye diagrams for different number of active users. It is shown that eye opening decreases and BER increases with increase in number of active users. It is also shown that BER further increases with increase in number of active users when number of decoders increases on receiver side. Hence, it is concluded that multiple access interference (MAI) is the dominant source of BER and there is graceful degradation in system performance when number of simultaneously active users increases. The received optical power is also measured at different transmission distance. It has been observed that received optical power decreases with increase in length of fiber due to attenuation.     

High speed CO-OFDM-FSO transmission system

This work is focused to carry out the investigation of fading resistant coherent detected OFDM-FSO system using a simulated test-bed employing OSSB- and ODSB-schemes under clear weather conditions. The data rate transmission is enhanced to 1 Tbps range by employing the coherent detection scheme over a prolonged FSO link as compared to direct detection based OFDM-FSO system (Sharma [18]). Further, the simulated work is also demonstrated for OSSB- and ODSB-schemes to report the best scheme to be used in CO-OFDM-FSO systems to achieve acceptable BER at high data rate transmission (up to1 Tbps).     

Simulation of fiber to the home triple play services at 2 Gbit/s using GE-PON architecture for 56 ONUs

This paper evaluates and compares FTTH (Fiber To The Home) GEPON (Gigabit Ethernet Passive Optical Network) link design for 56 subscribers at 20 km reach at 2 Gbps bit rate. A 1:56 splitter is used as a PON (Passive Optical Network) element which creates communication between a Central Office to different users and. A boosting amplifier is employed before fiber length which tends to decrease BER and allows more users to accommodate. This architecture is investigated for different values of data rate from a CO (Central Office) to the PON in terms of BER (Bit Error Rate). The simulation work reports BER of 4.5246e−009 at 2 Gbit/s systems for the case of 56 users and if we further increase data rate of system say 5 Gbps, then we observe a sharp increase in BER. Similarly in the variation of BER with respect to transmission distance, we observe that BER shows an increase in its value as transmission distance increases.     

Modeling and simulation of FBG based OCDMA-IsOWC system

Photonics have evolved from protracted fibers to dominant wireless system to look at the use of hybrid optical-wireless communication system into space technology. Inter-satellite optical wireless communication (IsOWC) systems, one of the important applications of optical-wireless communication, will be deployed in space in the near future. A significant improvement in BER at 5 Gbps is achieved along with the maximum length of ISL link between the two satellites by incorporating OFDM scheme in IsOWC systems than that of conventional IsOWC systems [9]. The work is further extended in this paper to prolong the ISL link with acceptable BER at 10 Gbps between two satellites in space by employing code division multiple access (CDMA) scheme due to its robustness against narrowband interference and an inherent low power spectral density. In this work, we have designed a model of FBG based CDMA-IsOWC system to establish a prolonged ISL link at data rate of 10 Gbps with SNR of 20 dB. Further, a comparison is also reported between our proposed FBG based CDMA-IsOWC system and OFDM-IsOWC system.     

像差对星间相干光通信接收系统误码性能的影响

以空间链路方程为基础,详细推导了具有不同像差时的星间相干光通信接收系统信噪比表达式。以通信距离为60000km、速率为2Gb/s的2PSK零差同步轨道接收系统为例,通过数值仿真,全面比较了接收天线的倾斜、离焦、彗差和像散等像差对接收系统误码率(εBER)的影响。结果表明,不同像差单独作用时,倾斜像差的影响最大,象散的影响最小;不同像差相互作用时,它们中的某些能部分实现相互校正,从而降低误码率。以εBER≤10-6为比较标准,当彗差W31/λ≤1.00时,调整倾斜像差能实现它们之间的部分校正;当像散W22/λ≤0.53时,调整离焦能对像散进行部分校正。因此,在设计接收系统时,接收天线的像差所产生的影响不容忽视。这将为设计星间相干通信接收系统提供必要的理论依据。     

A bidirectional hybrid DWDM-PON employing optical injection locking technique and data comparators

A bidirectional hybrid dense-wavelength-division-multiplexing (DWDM)-passive optical network (PON) employing optical injection locking technique on vertical-cavity surface-emitting lasers (VCSELs) and data comparator, as well as optical injection locking technique on distributed feedback laser diodes (DFB LDs) and amplitude/phase compensator is proposed and demonstrated. Improved performances of bit error rate (BER) and carrier-to-noise ratio/composite second order/composite triple beat (CNR/CSO/CTB) were observed in our proposed bidirectional hybrid DWDM-PON. Bidirectional transmission in bidirectional hybrid DWDM-PON architecture is a very attractive option, the capacity of the optical network can be expanded relatively easily by bidirectional transmission technology.     

Enhanced performance analysis of optical CDMA communication system

Optical CDMA technique is required to meet the increased demand for high speed, large capacity communications in optical networks. OCDMA assures data access security and supports asynchronous burst data transmission. In this paper, improvement in optical CDMA has been done by implementing forward error correction technique and a distance of 100 km was achieved BER 10⁻¹⁹ at bit rate 3.75 Gbps with forward error correction in optical CDMA.     

Adsorption position of oxygen on the Pt(111) surface

The adsorption position of oxygen on the clean Pt(111) surface has been determined by means of the transmission channeling technique. Oxygen adsorbs in a well ordered p(2 × 2) overlayer structure at temperatures 200 T 350 K. From an analysis of the angular scans along the [111], [110] and [100] axial directions it is concluded that the O atoms are adsorbed in the fcc three-fold hollow site exclusively at a height of 0.85 ± 0.06 Å above the Pt surface layer. From a narrowing of the [111] angular O scan, the O RMS displacement parallel to the surface is found to be 0.16 ±0.03 Å.     

On the carrier generation and HD signal transmission using the millimeter-wave radio over fiber system

The dual sideband optical carrier suppression (DSB-OCS) technique is employed in the optical carrier generation for 40 GHz radio over fiber (ROF) system. A dual electrode Mach-Zehnder modulator (DE-MZM) with the minimum transmission bias (MiTB) technique is employed to build the system. The results show that, a 40 GHz carrier is successfully generated with the amplitude up to −29 dBm and signal to noise ratio (SNR) of 35 dB and a high definition (HD) signal is successfully transmitted using the system. Finally, the bit error rate (BER) measurement is carried out for the system with 1.25 Gbps OOK signal showing an error free 40 GHz ROF system with almost no penalty between the back to back and 20 km fiber for a BER of 10⁻⁹.