Effect of synthesis method on oxygen adsorption/desorption properties of La–Sr–Co–Fe–O perovskite-type oxide

There has been a growing interest in utilizing La–Sr–Co–Fe–O perovskite-type oxide for efficient high temperature oxygen adsorption applications and oxygen removal process. In this paper, we focus our attention on the analysis of the determinants of the synthesis methods of La_0.6Sr_0.4Co_0.2Fe_0.8O_3?δ (LSCF) powders for the oxygen adsorption/desorption applications. To this aim, LSCF powders were successfully synthesized by different synthesis routes using polymerized complex and citrate methods. The effects of synthesis methods on the structure, particle size, specific surface area, oxygen adsorption/desorption kinetics, and oxygen uptake capacities of LSCF perovskite-type oxides were investigated. The oxygen adsorption/desorption capacities and kinetics of the LSCF oxides increase with increasing (1) the temperature from 700 to 900 °C and (2) the surface area observed at a given temperature. Collectively, the experimental observations suggest that particle sizes may play an important role in oxygen uptake capacities and adsorption/desorption kinetics.     

Synthesis and characterization of a new hybrid TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> filler for lithium conducting gel electrolytes

This paper describes the synthesis and properties of a new type of ceramic fillers for composite polymer gel electrolytes. Hybrid TiO₂-SiO₂ ceramic powders have been obtained by co-precipitation from titanium(IV) sulfate solution using sodium silicate as the precipitating agent. The resulting submicron-size powders have been applied as fillers for composite polymer gel electrolytes for Li-ion batteries based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF/HFP) copolymeric membranes. The powders, dry membranes and gel electrolytes have been examined structurally and electrochemically, showing favorable properties in terms of electrolyte uptake and electrochemical characteristics in Li-ion cells.     

渗透汽化型酯化膜反应器研究 聚合物/无机固体酸管式复合膜的膜反应性能

设计了渗透汽化型管式膜反应器,以乙酸丁酯合成反应为探针,考察了Ｚｒ（ＩＶ）／ＰＶＡ,Ｚｒ（ＩＶ）－ＰＶＡ／ＰＶＡ两类聚合物担载无机固体酸管式复合膜的膜催化反应性能。探讨了功能膜的组成,结构,反应条件等对膜反应和分离性能的影响以及同步膜分离过程对反应转化的促进作用。实验结果表明,膜催化酯化反应过程主要是依赖与料液接触侧膜表面层的催化活性,膜的催化活性是影响反应速率,特别是初期反应转化速率的主要因素,后期的超平衡转化则依赖于膜分离过程     

Ag/La0.6Sr0.4MnO3基催化剂上CH3OH和CO的完全氧化

合成了Ａｇ／Ｌａ０．６Ｓｒ０．４ＭｎＯ３、Ａｇ／Ｌａ０．６Ｓｒ０．４ＭｎＯ３／γ－ＡＩ２Ｏ３两毓催化剂,发现钙钛矿型Ｌａ０．６Ｓｒ０．４ＭｎＯ３对低浓度ＣＨ３ＯＨ或ＣＯ的完全氧化显示出相当高的催化活性,适量Ａｇ对钙钛矿型Ｌａ０．６Ｓ５０．４ＭｎＯ３基质的修使其对ＣＨ３ＯＨ或ＣＯ完全氧化催化活性获明显提高;在６％Ａｇ／２０％Ｌａ０．６Ｓｒ０．４ＭｎＯ３／γ－ＡＩ２Ｏ３催化剂 ,ＣＨ３ＯＨ完全氧化的Ｔ     

杂多化合物催化异丁烯氧化反应(英文)

The compositions and structures of heteropoly compounds as well as their catalytic behaviors for the isobutene partial oxidation have been studied by means of flow reactor, XRD, IR and DTA. It is found that the heteropoly compounds of PMo12As0.6Cu0.1Ox with appropriate quantities of K and V display good catalytic performances for one-step process of isobutene oxidation to methacrylic acid. Through modulating the compositions of catalysts and optimizing the reaction conditions, a yield of 67. 1% for methacrylic acid and methacrolein was obtained.     

TiO2修饰La0.6Sr0.4Co0.2Fe0.8O3-δ用于中温固体氧化物燃料电池的阴极

纳米TiO2修饰的La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)阴极被直接应用于YSZ电解质电池上. TiO2可阻止LSCF和YSZ间的化学反应,抑制SrZrO3的形成. LSCF-0.25 wt% TiO2阴极电池在0.7 V和600°C下的电流密度是LSCF阴极电池的1.6倍.电化学阻抗谱结果表明, TiO2修饰显著加快了氧离子注入电解质的过程,这可能与TiO2抑制了阴极/电解质界面处高电阻SrZrO3层的形成有关.本文为在ZrO2基电解质上使用高性能的(La,Sr)(Co,Fe)O3阴极材料提供了一种简单有效的方法.     

Thermogravimetry study of the effectiveness of different reducing agents during sintering of Cr-prealloyed PM steels

The La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF48) cathode material was used as a protective-conducting coating on an interconnect made of Crofer 22 APU ferritic steel intended for application in intermediate-temperature solid oxide fuel cell (IT-SOFC) stacks. The LSCF48 coating was deposited on the surface of the steel via screen-printing followed by appropriate thermal treatment. The oxidation kinetics of the Crofer 22 APU steel—uncoated and coated with LSCF48—approximately obeys the parabolic rate law in air at 1,073 K under isothermal and cyclic oxidation conditions. The oxidation rate for uncoated steel is higher than that for coated steel. SEM–EDS and XRD investigations showed that the LSCF48 coating interacts with the steel during long-term oxidation in the afore-mentioned thermal conditions, and an intermediate multilayer interfacial zone is formed. This intermediate layer leads to lower area specific resistance in air at 1,073 K in comparison to the Crofer 22 APU steel without surface modification.     

Oxygen permeation and oxidative coupling of methane in membrane reactor: A new facile synthesis method for selective perovskite catalyst

A dense membrane of La_0.6Sr_0.4Co_0.8Fe_0.2O_3−δ (LSCF) perovskite was prepared by a new chelating agent, ethylene diamine N,N,N′,N′-tetra N-acetyl diamine (EDTNAD). As a potent ligand, EDTNAD provided a facile one-step method to form complexes of the four metal ions, simultaneously. The oxygen permeation flux through the pure perovskite LSCF dense membrane was measured over temperature range of 1073–1223 K, thickness of 0.7–1.0 mm and oxygen partial pressure of 0.1–1.0 bar. Oxidative coupling of methane (OCM) reaction using LSCF disk in the atmospheric membrane reactor and over the temperature range of 1073–1173 K showed a C₂ selectivity of 100% and C₂ yield of 5.01% at 1153 K. Furthermore, OCM reaction data of the membrane reactor were discussed and compared with those of the fixed bed using the same perovskite powder as the catalyst.     

纳米La0.8A’0.2Mn1-xCuxO3（A’=Ce and/or Sr）的制备、表征及其高效催化NO+CO的性能研究

采用柠檬酸-溶胶凝胶法制得钙钛矿型复合氧化物La0.8Ce0.2Mn1-xCuxO3(x=0.2,0.3,0.4),La0.8Sr0.2Mn0.6Cu0.4O3,La0.8Ce0.1Sr0.1Mn0.6 Cu0.4 O3,并采用X射线衍射(XRD)、扫描电镜(SEM)、比表面积(BET)、X射线光电子能谱(XPS)对其进行表征,测试了复合氧化物对CO+NO的催化活性。结果表明:La0.8Ce0.1Sr0.1Mn0.6Cu0.4O3催化活性最好,150℃时CO转化率91.8%,300℃时NO转化率100%;对于La0.8Ce0.2Mn1-xCuxO3(x=0.2,0.3,0.4),比表面积和颗粒的大小及分散度是影响催化活性的主要因素;对于La0.8Ce0.2Mn0.6Cu0.4O3,La0.8 Sr0.2 Mn0.6 Cu0.4 O3,La0.8 Ce0.1 Sr0.1 Mn0.6 Cu0.4 O3,催化剂的组成是影响催化活性的关键因素。     

固体氧化物燃料电池LSCF-SDC 纳米复合阴极制备及性能研究

利用硝酸盐溶液一次浸渗工艺在La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)表面涂覆Sm0.2Ce0.8O2(SDC)纳米颗粒,制备了LSCF-SDC纳米结构复合阴极。微观结构分析显示SDC纳米颗粒在LSCF表面均匀分布并且颗粒大小均一。界面阻抗图谱表明SDC浸渗极大的降低了LSCF阴极的界面极化阻抗,在750和650℃仅为0.074,0.44Ω.cm2。LSCF-SDC复合阴极的表观活化能为1.42 eV,略小于纯LSCF阴极。与混合法制备的LSCF-GDC复合电极相比,采用浸渗工艺制备的LSCF-SDC纳米结构复合阴极也显示出良好的电化学催化活性。     

Tubular carbon nano-/microstructures synthesized from graphite powders by an in situ template process

Through the use of commercial graphite powders as the carbon sources, a variety of interesting tubular carbon nano- and microstructures, such as networked carbon nanotubes, aligned carbon microtubes with hexagonal cross-sections, aligned tapered carbon tubes, and hollow carbon microhorns, have been successfully synthesized. As-grown tubular carbon structures were characterized using scanning electron microscopy, transmission electron microscopy, and X-ray energy-dispersive spectroscopy. An in situ template mechanism was proposed to explain the possible growth process. The vibrational properties of the synthesized tubular carbon structures were also studied by Raman spectroscopy.     

Oxygenation of Fe(II) in the presence of citrate in aqueous solutions at pH 6.0-8.0 and 25 degrees C: interpretation from an Fe(II)/citrate speciation perspective

The kinetics of Fe(II) oxidation in the presence of various citrate concentrations have been investigated in aqueous solutions over the pH range 6.0-8.0 using colorimetry and speciation modeling. Oxidation of Fe(II) was interpreted and quantitatively modeled in terms of oxidation of various Fe(II)-citrate species. Using the model, it is possible to predict whether the presence of citrate would dominate the Fe(II) oxidation and thus enhance/retard the oxidation rate of Fe(II) and vice versa. The study also supports the presence of other Fe(II)-citrate species rather than just the monomeric species at circumneutral pH. At low pH and in a system where complexation of Fe(II) by citrate is dominant, oxidation of Fe(II) is controlled by the oxidation of both Fecit- and Fecit24-. As the pH increases, the oxidation of Fe(OH)cit25- becomes increasingly important and dominates the oxidation of Fe(II) at pH 8.0. Rate constants for the oxidation of all five suggested Fe(II)-citrate species have been estimated and may be used to predict the rate of Fe(II) oxidation at any combination of pH and citrate concentration.     

非晶态配合物法制备钙钛矿型纳米粉体催化剂及其CO催化氧化性能

运用非晶态配合物法合成了LaCoO3,La0.9Sr0.1CoO3,LaCo0.3Mn0.7O3和 La2CuO4钙钛矿型纳米粉体催化剂，研究了其CO催化化活性及SO2中毒性能，初步推 断了中毒机理。结果表明用该方法可以在较低下合成具有纯钙钛矿结构的纳米粉体 催化剂，该催化剂具有很好的CO催化化活性，其中LaCoO3系列的催化活性优于 La2CuO4，所有催化剂经SO2中毒后催化活性均有所下降。研究表明钙钛矿结构的破 坏是硫中毒失活的主要原因。     

采用红外漫反射光谱研究纳米Si3N4的表面结构

采用付利叶红外漫反射光谱对激光法制取的具有不同化学组成的纳米Ｓｉ３Ｎ４粉（１５４－３０ｎｍ）的表面结构，室表面氧化及热稳定性进行了研究，结果表明新鲜的富氮粉体表面主要为硅胺基（Ｓｉ３－ｘＮＨｘ，ｘ＝１－３）结构，粉体暴露空气后硅胺基会与空气中的水分子反应形成硅醇基（ＳｉＯＨ）结构，具有不同组成的粉体随粉中氮含量的增大粒子表面硅胺基量也增加；富硅粉体表面硅胺基较少，其氧化主要为表面硅原子与空气中氧原     

A rapid method for the estimation of glutamic acid with chloramine-T

Chloramine-T (added in excess) oxidizes glutamic acid in various solvent media and the reaction is rapid and stoichiometric with a 4-electron change in buffers of pH 1-6, in 0.01 M sulphuric and perchloric acids and in 0.1M hydrochloric acid. A back-titration procedure using a pH-4 buffer or 0.1M hydrochloric acid as reaction medium has been developed. rho-Toluenesulphonamide and a nitrile have been identified in the reaction products. The effect of other species on the oxidation has been investigated.     

渗透汽化型酯化膜反应器研究——PVA/PSSA共混聚合物管式复合膜的膜反应性能

聚合物共混是制备具有预定性能的功能膜材料的有效方法．报道了以惰性素烧陶瓷管为支撑体的ＰＶＡ／ＰＳＳＡ共混聚合物管式复合膜的制备及其在渗透汽化型酯化膜反应器中不同实验条件下的膜催化反应性能．探讨了共混膜的组成,反应温度等对膜反应和分离性能的影响以及同步膜分离过程对反应转化率的促进作用．交联ＰＶＡ／ＰＳＳＡ管式复合膜具有良好的催化和分离性能．     

SBA-15负载金属[Co(Ⅱ),Zn(Ⅱ)]酞菁催化剂的制备及其催化氧化性能

以1,8-二氮杂双环[5,4,0]十一碳烯-7为催化剂,4,5-二丁氧基邻苯二甲腈为原料,用液相法合成了两种金属酞菁配合物——β-八(丁氧基)酞菁钴(1)和β-八(丁氧基)酞菁锌(2),其结构经UV-Vis和IR表征。采用浸渍法将1和2分别负载到有序介孔分子筛SBA-15上制得SBA-15负载金属酞菁催化剂SBA1-15和SBA2-15。以0.1 mol.L-1亚硫酸钠的氧化反应为探针反应,研究了常温常压、氧气气氛下,SBA1-15和SBA2-15的催化氧化活性,并考察了SBA1-15的用量对其催化活性的影响及重复利用性。结果表明,两种催化剂均具有良好的催化性能,在用量相同时,SBA1-15的催化氧化性能优于SBA2-15;SBA1-15的质量为溶液质量的0.16‰时,催化活性最佳,且可以重复使用。     

Cu-CeO_2基阳极直接甲烷SOFC的制备及其性能

采用干压法制备了NiO-YSZ(氧化钇稳定氧化锆)/(ZrO2)0.89(Sc2O3)0.1(CeO2)0.01(10ScSZ-1CeO2)半电池,经还原-酸溶法除去NiO制备了多孔YSZ负载致密10ScSZ-1CeO2双层结构,通过浸渍法在多孔YSZ阳极基体中引入Ce、Cu的硝酸盐制备Cu-CeO2-YSZ复合阳极,结合La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)阴极构建了Cu-CeO2-YSZ/10ScSZ-1CeO2/LSCF单元电池.通过X射线衍射(XRD)和场发射扫描电镜(FESEM)等手段对电池单元的物相、微观结构进行表征.结果表明:还原-酸溶法制备的YSZ/10ScSZ-1CeO2双层结构的YSZ基体具有孔隙率高(64%)、孔洞连通性好的微观结构,有助于采用浸渍法引入Ce、Cu硝酸盐;10ScSZ-1CeO2电解质薄膜致密无缺陷,厚约30μm.电性能测试表明所构建单元固体氧化物燃料电池(SOFC)具有良好的电性能输出,在650℃以湿H2和CH4为燃料时的最大功率密度分别为0.29和0.09W·cm-2;在700℃以湿H2和CH4为燃料时的最大功率密度分别达到0.48和0.21W·cm-2.优良的电性能主要归功于小的电解质内阻和阴极极化电阻以及良好的阳极微观结构.     

Tubular Structures of Calcium Carbonate: Formation,Characterization, and Implications in Natural Mineral Environments

Chemical gardens are self-assembled tubular precipitates formed by a combination of osmosis, buoyancy, and chemical reaction, and thought to be capable of catalyzing prebiotic condensation reactions. In many cases, the tube wall is a bilayer structure with the properties of a diaphragm and/or a membrane. The interest in silica gardens as microreactors for materials science has increased over the past decade because of their ability to create long-lasting electrochemical potential. In this study, we have grown single macroscopic tubes based on calcium carbonate and monitored their time-dependent behavior by in situ measurements of pH, ionic concentrations inside and outside the tubular membranes, and electrochemical potential differences. Furthermore, we have characterized the composition and structure of the tubular membranes by using ex situ X-ray diffraction, infrared and Raman spectroscopy, as well as scanning electron microscopy. Based on the collected data, we propose a physicochemical mechanism for the formation and ripening of these peculiar CaCO₃ structures and compare the results to those of other chemical garden systems. We find that the wall of the macroscopic calcium carbonate tubes is a bilayer of texturally distinct but compositionally similar calcite showing high crystallinity. The resulting high density of the material prevents macroscopic calcium carbonate gardens from developing significant electrochemical potential differences. In the light of these observations, possible implications in materials science and prebiotic (geo)chemistry are discussed.     

Chemical state study of palladium powder and ceria-supported palladium during low-temperature CO oxidation

The chemical state of Pd at the surfaces of two sizes of Pd powders and ceria-supported Pd during low-temperature CO oxidation has been studied using X-ray photoelectron spectroscopy (XPS). During oxidation in O(2), metallic Pd powder is converted into PdO, and the thickness of the PdO layer increases with increasing reaction temperature. A similar Pd oxidation process occurs during the catalytic CO oxidation reaction, but the extent of the Pd oxidation is less due to the presence of CO which is a reducing agent. The reaction rate data indicate that the larger size Pd powder is about three times more active than the smaller size Pd powder on a surface area basis at 160 degrees C. Catalytic CO oxidation data obtained from 10 wt % Pd supported on nanocrystalline ceria powder indicate that there is a strong chemical interaction between the ceria and the supported Pd. The Pd is present as PdO on the fresh catalyst. During reaction, small amounts of Pd metal and PdO(2) are formed at 50 degrees C while less Pd metal and only a small amount of PdO(2) are present after running the reaction at 110 degrees C. At 50 degrees C, the catalytic activity decays rapidly due to accumulation of carbonate or bicarbonate species on the surface. This decay does not occur at 110 degrees C due to decomposition of the bicarbonate species.