Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Spectral studies of N-nonyl acridine orange in anionic, cationic and neutral surfactants

The spectroscopic and photophysical properties of N-nonyl acridine orange - a metachromatic dye useful as a mitochondrial probe in living cells - are reported in water and microheterogeneous media: anionic sodium dodecylsulfate (SDS), cationic cetyltrimethylammonium bromide (CTAB) and neutral octylophenylpolyoxyethylene ether (TX-100). The spectral changes of N-nonyl acridine orange were observed in the presence of varying amount of SDS, CTAB and TX-100 and indicated formation of a dye-surfactant complex. The spectral changes were also regarded to be caused by the incorporation of dye molecules to micelles. It was proved by calculated values K(b) and f in the following order: K(bTX-100)>K(bCTAB)>K(bSDS) and f(TX-100)>f(CTAB)>f(SDS). NAO binds to the micelle regardless the micellar charge. There are two types of interactions between NAO and micelles: hydrophobic and electrostatic. The hydrophobic interactions play a dominant role in binding of the dye to neutral TX-100. The unexpected fact of the binding NAO to cationic CTAB can be explained by a dominant role of hydrophobic interactions over electrostatic repulsion. Therefore, the affinity of NAO to CTAB is smaller than TX-100. Electrostatic interactions play an important role in binding of NAO to anionic micelles SDS. We observed a prolonged fluorescence lifetime after formation of the dye-surfactant complex tau(SDS)>tau(TX-100)>tau(CTAB)>tau(water), the dye being protected against water in this environment. TX-100 is found to stabilize the excited state of NAO which is more polar than the ground state. Spectroscopic and photophysical properties of NAO will be helpful for a better understanding of the nature of binding and distribution inside mammalian cells.     

Interaction between flavonoid, quercetin and surfactant aggregates with different charges

The interactions of flavonoid, quercetin with sodium dodecyl sulfate (anionic surfactant) and cetyltrimethyl ammonium bromide (cationic surfactant) micelles were investigated. The average location site of quercetin in different micelles was determined by the cyclic voltammetry method with the aid of molecular optimization. The interaction parameters of quercetin with micelles of different charges such as binding constant K and normal binding energy DeltaG were calculated. Furthermore, the morphologic change of the SDS and CTAB spherical micelles and rod-like micelles upon their interaction with quercetin was also observed.     

Characterization of the fluorescence emission properties of prodan in different reverse micellar environments

We have examined the steady state and time resolved fluorescence emission properties of the hydrophobic fluorescence probe, prodan, in three representative reverse micellar systems formed by the surfactants poly(oxyethylene) (tetramethylbutyl) phenylether (Triton X-100, neutral), cetyl trimethylammonium bromide (CTAB, cationic) and sodium bis-(2-ethylhexyl) sulfosuccinate (AOT, anionic) in organic solvent media containing different concentrations of water. The results obtained from the experiments indicate conspicuous dependence of the emission behaviour of prodan on the type of surfactant used and the water/surfactant molar ratio (w0). The nature of the emission profiles, along with relevant parameters namely emission maximum (lambda(em)max), anisotropy (r) and lifetime (tau) data are used to infer the distribution and microenvironments of the prodan molecules in the reverse micelles at different w0 values. Furthermore, quantitative estimates have been obtained for the polarities (in terms of the empirical polarity parameter E(T)(30)) of the sites of solubilization of the fluorophore in different reverse micellar systems.     

Quenching of zinc phthalocyanine excited states by viologen surfactant assemblies——The influence of microenvironment

A series of functional surfactants of N-alkyl-N'-butyl viologens has been synthesized.The quenching of excited singlet and triplet states of zinc phthalocyanine was studied in DMSOand in mixed micelles containing the functional surfactant as one and cationic cetyl trimethylam-monium bromide(CTAB),anionic sodium dodecylsulfate(SDS)and neutral TX-100 surfactantas the other component.Fluorescence quenching and laser photolysis studies indicate that thefunctional surfactants are solubilized at different sites in micelles,the process depends on chainlength and exerts great influence on the quenching of zinc phthalocyanine excited states.     

Study of valsartan interaction with micelles as a model system for biomembranes

In this study, the interaction of valsartan (VAL), an angiotensin II receptor antagonist, with cationic surfactant cetyltrimethylammonium bromide (CTAB) was investigated. The effect of cationic micelles on spectroscopic and acid-base properties of VAL was carried out using UV spectrophotometry at physiological conditions (pH 7.4). The binding of VAL to CTAB micelles implied a shift in drug acidity constant (pK(a)(water)-pK(a)(micelle)=1.69) proving the great affinity of VAL dianion for the positively charged CTAB micelle surface. To quantify the degree of VAL/CTAB interaction, two constants were calculated by using mathematical models: micelle/water partition coefficient (K(x)) and drug/micelle binding constant (K(b)). The decrease of K(x) with VAL concentration, obtained by using pseudo-phase model, is consistent with an adsorption-like phenomenon. From the dependence of differential absorbance at lambda=295 nm on CTAB concentration, by using mathematical model that treats the solubilization of VAL dianion as its binding to specific sites in the micelles (Langmuir adsorption isotherm), the binding constant (K(b)=(2.50+/-0.49)x10(4)M(-1)) was obtained. Binding constant VAL/CTAB was also calculated using micellar liquid chromatography (MLC).     

Interaction of quinapril anion with cationic surfactant micelles of cetyltrimethylammonium bromide

In this study, the interaction of the anion of quinapril (QUIN), angiotensin converting enzyme (ACE) inhibitor, with cationic surfactant cetyltrimethylammonium bromide (CTAB) was investigated. The effect of cationic micelles on the spectroscopic and acid-base properties of QUIN was studied at pH 8. The binding of QUIN anion to CTAB micelles implied a shift in drug acidity constant (pK(a)(water)-pK(a)(micelle)=1.39) proving the great affinity of negatively charged QUIN ion for the positively charged CTAB micelle surface. The strong dependence of the partition coefficient K(x) on QUIN concentration, obtained by using pseudo-phase model, is consistent with an adsorption-like phenomenon. From the dependence of differential absorbance at lambda=272 nm on CTAB concentration, by using mathematical model that treats the solubilization of QUIN anion as its binding to specific sites in the micelles (Langmuir adsorption isotherm), the binding constant K(b)=(2.3+/-0.4)x10(3) mol(-1)dm(3) was obtained. QUIN-CTAB binding constant was also calculated from micellar liquid chromatography (MLC) and this method was found to be not accurate enough for its determination.     

Kinetics of hydrolysis of procaine in aqueous and micellar media

The kinetics of alkaline hydrolysis of procaine under the pseudo–first‐order condition ([OH^?] ? [procaine]) has been carried out. N,N‐Diethylaminoethanol and p‐aminobenzoate anion were obtained as the hydrolysis product. The rate of hydrolysis was found to be linearly dependent upon [NaOH]. The addition of cationic cetyltrimethylammonium bromide (CTAB), dodecyltrimethylammonium bromide (DDTAB) and tetradecyltrimethylammonium bromide, and anionic sodium dodecyl sulfate (SDS) micelles inhibited the rate of hydrolysis. The maximum inhibitive effect on the reaction rate was observed for SDS micelles, whereas among the cationic surfactants, CTAB inhibited most. The variation in the rate of hydrolysis of procaine in the micellar media is attributed to the orientation of a reactive molecule to the surfactant and the binding constant of procaine with micelles. The rate of hydrolysis of procaine is negligible in DDTAB micelles. The observed results in the presence of cationic micelles were treated on the basis of the pseudophase ion exchange model. The results obtained in the presence of anionic micelles were treated by the pseudophase model, and the various kinetic parameters were determined. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 1–9, 2013     

Applicability of Positive Cooperativity Model of Enzyme Catalysis on Surfactant-Mediated Reaction of Pararosaniline Hydrochloride Carbocation with Hydroxide Ion

The reaction of hydroxide ion with stabilized pararosaniline hydrochloride carbocation was investigated in the presence of cationic micelles of cetyltrimethylammonium bromide (CTAB) and anionic micelles of sodium dodecyl sulfate (SDS). Pseudo-first-order kinetics were followed by the reaction system and rate constant depends on surfactant concentration. The reaction was strongly inhibited in the presence of SDS micelles whereas catalyzed in the presence of CTAB micelles. Micellar data were analyzed by applying positive cooperativity model of enzyme catalysis. The value of index of cooperativity (n) was greater than 1 for all reaction systems. Inhibitory and catalytic effect in the presence of micelles had been explained on the basis of hydrophobic and electrostatic interactions of various species present in the reaction systems. Presence of counterions in the reaction system inhibited the reaction rate.     

Effect of surfactant chain length on the binding interaction of a biological photosensitizer with cationic micelles

Steady-state and time-resolved fluorometric techniques have been exploited to study the photophysical and distribution behavior of an efficient cancer cell photosensitizer, norharmane (NHM), in well-characterized, biomimicking nanocavities formed by cationic micelles with varying surfactant chain length. Amphiphiles like dodecyl trimethyl ammonium bromide (DTAB), tetradecyl trimethyl ammonium bromide (TTAB), and cetyl trimethyl ammonium bromide (CTAB) have been used for the purpose. Emission behavior of NHM is very much dependent on the surfactant concentration as well as their hydrophobic chain length. The binding constant (K) and free-energy change (DeltaG) for the interaction of NHM with the cationic micelles have been determined from the fluorescence data. Polarity of the microenvironment around the probe has been determined in the cationic micellar environments from a comparison of the variation of fluorescence properties of the two-prototropic species of the probe in water/dioxane mixture with varying composition. Experimental results demonstrate that the variation in the cationic surfactant chain length plays an important role in promoting a specific prototropic form of the probe molecule. Fluorescence decays are biexponential in all the micelles indicating that the probe molecules are distributed between the two distinct regions of the micelles. The population of the component with a longer lifetime corresponds to the probe in the head group site, while the short-lived component comes from the probe bound to the core region of the micelles. On the basis of the lifetime measurements, the partitioning behavior of the chromophore in the head group and in the core regions in the micelles has been determined.     

Distribution of emulsified monomers with different water solubility

The location and distribution of acrylic acid and styrene in emulsions made with a cationic surfactant, cetyltrimethylammonium bromide (CTAB), or an anionic surfactant, sodium dodecylsulfate (SDS), were determined with ultra-violet spectroscopy, conductivity, and potentiometry. In these systems, the acrylic acid remains in the aqueous phase near the micelle surface, whereas the styrene is located in the micelles or in emulsified droplets. In the absence of acrylic acid, some of the styrene is solubilized in the micelle interior and some is adsorbed at the micelle inner surface. Upon addition of acrylic acid, all the styrene is displaced to the center of the micelles. The interaction between acrylic acid and CTAB micelles is stronger than that between acrylic acid and SDS micelles. With CTAB, acrylic acid is adsorbed at the micelle surface, whereas with SDS, acrylic acid remains in the intermicellar solution. These differences can account for the differences reported in the emulsion copolymerization of acrylic acid and styrene using CTAB or SDS.     

Depletion flocculation of latex dispersion in ionic micellar systems

The flocculation behavior of anionic and cationic latex dispersions induced by addition of ionic surfactants with different polarities (SDS and cetyltrimethylammonium bromide (CTAB)) have been evaluated by rheological measurements. It was found that in identical polar surfactant systems with particle surfaces of SDS + anionic lattices and CTAB + cationic lattices, a weak and reversible flocculation has been observed in a limited concentration region of surfactant, which was analyzed as a repletion flocculation induced by the volume-restriction effect of the surfactant micelles. On the other hand, in oppositely charged surfactant systems (SDS + cationic lattices and CTAB + anionic lattices), the particles were flocculated strongly in a low surfactant concentration region, which will be based on the charge neutralization and hydrophobic effects from the adsorbed surfactant molecules. After the particles stabilized by the electrostatic repulsion of adsorbed surfactant layers, the system viscosity shows a weak maximum again in a limited concentration region. This weak maximum was influenced by the shear rate and has a complete reversible character, which means that this weak flocculation will be due to the depletion effect from the free micelles after saturated adsorption.     

A surfactant type fluorescence probe for detecting micellar growth

We report on the detection of micellar growth in anionic, cationic, and catanionic surfactant systems using a novel surfactant type fluorescence probe, sodium 12-(N-dansyl)amino-dodecanate (12-DAN-ADA). The fluorescent group was incorporated in the tail of the surfactant which tethers the fluorescent group deep inside the apolar micellar cores. The fluorescence anisotropy of 12-DAN-ADA was found to be very sensitive for directly detecting the micellar growth in micelles containing oppositely charged surfactants, including cationic CTAB systems and mixed systems of oppositely charged surfactants (DEAB/SDS); in regard to the like charged SDS micellar systems, the sensitivity can be greatly enhanced by addition of a water soluble quencher which quenches the background fluorescence from the equilibrium population of free 12-DAN-ADA.     

Micellar effects of a triazole-based cationic gemini surfactant on the rate of a nucleophilic aromatic substitution reaction

The reaction between 2,4-dinitrochlorobenzene (DNCB) and hydroxide ion was studied spectrophotometrically at 25 °C in micelles of a triazole-based cationic gemini surfactant 18-triazole-18 or micelles of the conventional cationic surfactant CTAB. Both CTAB and 18-triazole-18 accelerated this nucleophilic aromatic substitution reaction. The binding constant of the substrate to the micelle, K _S, for 18-triazole-18 (K _S=335 M⁻¹) was found to be much larger than that for CTAB (85 M⁻¹) by fitting the kinetic results with pseudophase ion-exchange (PIE) model, which suggests that DNCB binds with gemini micelles more easily than it does with CTAB micelles. It was also found that 18-triazole-18 catalytic system was in accordance with PIE model at surfactant concentrations below ca. 0.5 mM, above which the increase of viscosity and the change of micelle size with increased surfactant concentration may remarkably influence the reaction. This was quite different from the reaction catalyzed by micelles of the conventional surfactant CTAB.     

Spectrophotometric study of anionic azo-dye light yellow (X6G) interaction with surfactants and its micellar solubilization in cationic surfactant micelles

Solubilization and interaction of azo-dye light yellow (X6G) at/with cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) was investigated spectrophotometricaly. The effect of cationic micelles on solubilization of anionic azo dye in aqueous micellar solutions of cationic surfactants was studied at pH 7 and 25 degrees C. The binding of dye to micelles implied a bathochromic shift in dye absorption spectra that indicates dye-surfactant interaction. The results showed that the solubility of dye increased with increasing surfactant concentration, as a consequence of the association between the dye and the micelles. The binding constants, K(b), were obtained from experimental absorption spectra. By using pseudo-phase model, the partition coefficients between the bulk water and surfactant micelles, K(x), were calculated. Gibbs energies of binding and distribution of dye between the bulk water and surfactant micelles were estimated. The results show favorable solubilization of dye in CTAB micelles.     

UV-Visible Spectrometric Study and Micellar Enhanced Ultrafiltration of Alizarin Red S Dye

Ultraviolet spectrometric study of alizarin red S (ARS) showed the substantial change in dye spectra by cationic CTAB as compared to anionic SDS and nonionic TX-100 surfactant. High spectral change by CTAB confirms the anionic nature of ARS dye and thus ARS-CTAB complex formation takes place due to electrostatic force of attraction. A little spectral change by SDS is the result of similarly charged repulsive forces that overcome weak hydrophobic-hydrophobic interaction between dye and surfactant micelles. TX-100 exhibited moderate spectral effect responsive to weak hydrophobic-hydrophobic interaction alone. MEUF study of ARS dye justified the spectral changes and dye rejection percentage (R) decreases in the following order: cationic > nonionic > anionic surfactant. Permeate flux (J) slightly decreases in presence of CTAB and it remains virtually constant for both SDS and TX-100. Addition of copper salt (i.e., CuCl₂) in dye-CTAB complex solution, favors rejection (%) removing dye and copper simultaneously via micellar enhanced ultrafiltration.     

Encapsulation of curcumin in cationic micelles suppresses alkaline hydrolysis

The alkaline hydrolysis of curcumin was studied in three types of micelles composed of the cationic surfactants cetyl trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB) and the anionic surfactant sodium dodecyl sulfate (SDS). At pH 13, curcumin undergoes rapid degradation by alkaline hydrolysis in the SDS micellar solution. In contrast, alkaline hydrolysis of curcumin is greatly suppressed in the presence of either CTAB or DTAB micelles, with a yield of suppression close to 90%. The results from fluorescence spectroscopic studies reveal that while curcumin remains encapsulated in CTAB and DTAB micelles at pH 13, curcumin is dissociated from the SDS micelles to the aqueous phase at this pH. The absence of encapsulation and stabilization in the SDS micellar solution results in rapid hydrolysis of curcumin.     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

Self-assembly of hydrophobin and hydrophobin/surfactant mixtures in aqueous solution

The self-assembly of the protein hydrophobin, HFBII, and its self-assembly with cationic, anionic, and nonionic surfactants hexadecylterimethyl ammonium bromide, CTAB, sodium dodecyl sulfate, SDS, and hexaethylene monododecyl ether, C(12)E(6), in aqueous solution have been studied by small-angle neutron scattering, SANS. HFBII self-assembles in solution as small globular aggregates, consistent with the formation of trimers or tetramers. Its self-assembly is not substantially affected by the pH or electrolytes. In the presence of CTAB, SDS, or C(12)E(6), HFBII/surfactant complexes are formed. The structure of the HFBII/surfactant complexes has been identified using contrast variation and is in the form of HFBII molecules bound to the outer surface of globular surfactant micelles. The binding of HFBII decreases the surfactant micelle aggregation number for increasing HFBII concentration in solution, and the number of hydrophobin molecules bound/micelle increases.