Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

Polar and azimuthal alignment of a nematic liquid crystal by alkylsilane self-assembled monolayers: effects of chain-length and mechanical rubbing

Alkylsilane self-assembled monolayers (SAMs) on oxide substrates are commonly used as liquid crystal (LC) alignment layers. We have studied the effects of alkyl chain length, photolytic degradation, and mechanical rubbing on polar and azimuthal LC anchoring. Both gradient surfaces (fabricated using photolytic degradation of C18 SAMs) and unirradiated SAMs composed of short alkyl chains show abrupt transitions from homeotropic to tilted alignment as a function of degradation or chain length. In both cases, the transition from homeotropic to tilted anchoring corresponds to increasing wettability of the SAM surfaces. However, there is an offset in the critical contact angle for the transition on gradient vs unirradiated SAMs, suggesting that layer thickness is more relevant than wettability for LC alignment. Mechanical rubbing can induce azimuthal alignment along the rubbing direction for alignment layers sufficiently near the homeotropic-to-planar transition. Notably, mechanical rubbing causes a small but significant shift in the homeotropic-to-tilted transition, e.g., unrubbed C5 SAMs induce homeotropic anchoring, but the same surface after rubbing induces LC pretilt.     

新型偶氮苯硫醇衍生物自组装膜的制备与结构表征

自组装单分子膜(ＳＡＭｓ)是近年来引起广泛注意的一种稳定的、二维有序的、致密的有机超薄膜体系,由于其优越的性能,在润滑、吸附、防腐、电化学及微电子等领域中显示出广阔的应用前景[1～4].自组装单分子膜是使用含有各种活性官能团(如-ＣＯＯＨ,-ＳＨ,-Ｓ-Ｓ-,-ＯＨ,-ＣＮ等)的分子,以化学键的形式与相应的基底(如Ａｕ,Ａｇ,Ｃｕ,Ｐｔ,Ｓｉ,Ｍｉｃａ等)相互作用从而自发地形成自组装膜.根据不同的研究或应用目的合理设计组装分子的结构及基底表面,从而得到具有所需功能的自组装单分子膜是近年来界面科学和材料科学等领域研究的热点之一.…     

The thermal behaviour of mixed long chain alkylammonium tetrachloromanganates(II)

The results of a calorimetric and structural investigation of mixtures of layer compounds of the kind (RNH₃)₂MCl₄, R being a long chain n-alkyl group, show that the low-temperature forms are solid solutions, mainly ordered from the conformational viewpoint, in which chains of different length are more or less randomly arranged on the surface of the anionic layers. The observed high enthalpy solid—solid phase transitions correspond to the “melting” of the hydrocarbon layers, giving solid solutions in which the conformational freedom of the alkyl chains is similar to that of hydrocarbon substances in the liquid state.     

新型偶氮苯硫醇衍生物自组装膜的制备与结构表征

Self Assembled Monolayers(SAMs) of a series of mercapto contained azobenzene derivatives with the structure of CnH2n+1AzoO(CH 2)mSH (where n =4,6,8,10,12; with m =3,5 respectively) were prepared and characterized. Wettability measurement of water on the SAMs demonstrates that molecular packing density in the monolayers increases while the alkyl chain in the molecules is lengthened. Both the n and m values have similar contribution to the wetting property of SAMs. The RA IR spectra reveal that the alkyl chains in the SAMs tilt away dramatically from the surface normal direction with the increase in their length. However, the orientation of azobenzene moiety is found to be influenced slightly by the alkyl chain length, which is due to the tenderness of the molecule.     

Structural, odd-even chain alternation and thermal investigation of a homologous series of anhydrous silver(I) n-alkanoates

Molecular and lattice structures of a homologous series (n(c) = 8-20, inclusive) of silver (I) n-alkanoates are determined from X-ray Powder Diffraction, Solid State spin decoupled (13)C-NMR and variable temperature Fourier Transform Infrared Spectroscopies. The compounds crystallize in a monoclinic crystal system with hydrocarbon chains in the fully extended all-trans conformation. Moreover, the chains are tilted ca. 75° with respect to the metal basal plane and are arranged as methyl(tail)-to-methyl(tail) bilayers within a lamellar. The methyl chain ends, from different layers in the bilayer, do not overlap but are in such close proximity to cause methyl-methyl interactions. In a molecule, two carboxylate groups bind in a syn-syn type bridging bidentate mode to two silver atoms to form an eight-membered structure. Intramolecular silver-silver and intermolecular Ag-O-Ag interactions stabilize the head group and promote the formation of layer type polymeric sheets. Though the compounds are nearly isostructural, odd-even chain alternation is observed in density, anti-symmetric stretching vibrations of methyl and unusually, carboxylate (head) groups, as a result of packing differences of hydrocarbon chains within the crystal lattice. These arise from the relative vertical distances between polymeric sheets, which are not in the same plane. Thus, for odd chain length compounds, where those distances are less than for even chains, more ordered packing and hence higher densities are observed for these adducts. Also, the numbers and natures of the thermotropic phase transitions are chain length dependent and irreversible.     

四氯合锌酸二(正十一烷基铵)晶体相变的Raman光谱

用Raman光谱研究了[n-C~11H~23NH~3]~2ZnCl~4(简记为C~nZn)配合物的固-固相变。结果表明, 配合物产生的固-固相变主要与烷烃链的堆积结构和分子构象变化有关, 在T~cl=25℃的相变是由于烷烃链的侧向堆积和分子构象的有序到部分无序变化。在中间相, 分子链局部产生旁式构象。在T~c2=87℃的相变主要来源于烷烃链从部分构象有序到完全无序的变化, 高温相形成了构象完全无序相, 相应于烷烃链的"熔化"。     

Melting of saturated fatty acid zinc soaps

The melting of alkyl chains in the saturated fatty acid zinc soaps of different chain lengths, Zn(C(n)H(2n+1)COO)(2); n = 11, 13, 15, and 17, have been investigated by powder X-ray diffraction, differential scanning calorimetry, and vibrational spectroscopy. These compounds have a layer structure with the alkyl chains arranged as tilted bilayers and with all methylene chains adopting a planar, all-trans conformation at room temperature. The saturated fatty acid zinc soaps exhibit a single reversible melting transition with the associated enthalpy change varying linearly with alkyl chain length, but surprisingly, the melting temperature remaining constant. Melting is associated with changes in the conformation of the alkyl chains and in the nature of coordination of the fatty acid to zinc. By monitoring features in the infrared spectra that are characteristic of the global conformation of the alkyl chains, a quantitative relation between conformational disorder and melting is established. It is found that, irrespective of the alkyl chain length, melting occurs when 30% of the chains in the soap are disordered. These results highlight the universal nature of the melting of saturated fatty acid zinc soaps and provide a simple explanation for the observed phenomena.     

带有端烷烃链的超支化聚酯的受限结晶及动态黏弹行为

以三羟甲基丙烷(TMP)为核,二羟甲基丙酸(DMPA)为支化单体,通过熔融缩聚法合成了第3代端羟基脂肪族超支化聚酯,并用十八酸对其进行端基改性,采用广角X射线衍射(WAXD)、示差扫描量热分析(DSC)及红外光谱(FTIR)研究了不同端基改性程度的超支化聚酯的结晶熔融行为及端烷烃链的构象和堆积结构随温度的变化,采用旋转流变仪研究了端烷烃链对脂肪族超支化聚酯熔体动态黏弹行为的影响.结果表明,这类改性超支化聚酯的结晶归因于长链端烷烃的有序排列,改性程度越高,衍射峰强度越大.受限结晶的端烷烃链在升温后并不能完全转变为无序的结构状态,改性超支化聚酯在"熔点"以上仍有部分有序结构存在.超支化聚酯的线性黏弹区随着端基改性程度的增大而逐渐变短,超支化聚酯的弹性逐渐增大,剪切变稀越明显.动态流变测试中所出现的现象与改性超支化聚酯中端烷烃链的受限密切相关.     

Hydrogen Chloride Induced Reorganization of Packing Phases in Self-assembled Monolayers of n-Alkanoic Acids on Silver Surface

A unique reorganization process, which was induced by HCI treatment of the self-assembled monolayers of n-alkanoic acids on silver surfaces, was visualized by polarized reflection absorption IR spectroscopy. The process can be reversible or irreversible, depending on the chain length of the monolayer-forming acid. Thus for C16 acid, the highly oriented and crystalline monolayer packing phase reorganized reversibly into isotropic microcrystallites. For C8 acid, the ordered packing phase reorganized irreversibly into a disordered, liquid-like phase. For C24 acid, reversible change in orientation occurred. All changes are due to the protonation-deprotonation reaction occurring at the binding head group.     

Phase transition of short linear molecules adsorbed on solid surfaces from a density functional approach

A microscopic density functional theory is used to investigate the adsorption of short chains on strongly attractive solid surfaces. We analyze the structure of the adsorbed fluid and investigate how the layering transitions change with the change of the chain length and with relative strength of the fluid-solid interaction. The critical temperature of the first layering transition, rescaled by the bulk critical temperature, increases slightly with an increase of the chain length. We have found that for longer chains the layering transitions within consecutive layers are shifted toward very low temperatures and that their sequence is finally replaced by a single transition.     

Thermotropic mesomorphic behavior of surfactant-encapsulated polyoxometalate hybrids

We investigate in detail novel organic-inorganic hybrid liquid crystalline materials, the complexes of surfactant-encapsulated polyoxometalate clusters (SECs), using thermal, X-ray diffraction, and FT-IR spectroscopic analyses. The differential scanning calorimetry measurements reveal four phase transitions under heating processes. We employ FT-IR spectroscopy to understand these phase behaviors. On the basis of vibration spectral assignments, the evidence suggests that the first two phase transitions are associated with the increase of gauche conformers and the disruption of alkyl chains packing in the heating run; the third phase transition is due to the full conformational disorder of alkyl chains covered on the polyoxometalates (PMs); no significant C-H stretching or wagging vibrations are observed with the fourth transition. We find that the fourth endothermic peak is sensitive to the charges of the PMs, and the transition temperature decreases from 185, 177, to 164 degrees C with decreasing PM charges from 13, 11, to 9, respectively. Interestingly, the temperatures of the first three phase transitions of SECs are essentially independent of the PM charges.     

Crystal Engineering of Supramolecular 1,4-Benzene Bisamides by Side-Chain Modification – Towards Tuneable Anisotropic Morphologies and Surfaces

Benzene bisamides are promising building blocks for supramolecular nano-objects. Their functionality depends on morphology and surface properties. However, a direct link between surface properties and molecular structure itself is missing for this material class. Here, we investigate this interplay for two series of 1,4-benzene bisamides with symmetric and asymmetric peripheral substitution. We elucidated the crystal structures, determined the nano-object morphologies and derived the wetting behaviour of the preferentially exposed surfaces. The crystal structures were solved by combining single-crystal and powder X-ray diffraction, solid-state NMR spectroscopy and computational modelling. Bulky side groups, here t-butyl groups, serve as a structure-directing motif into a packing pattern, which favours the formation of thin platelets. The use of slim peripheral groups on both sides, in our case linear perfluorinated, alkyl chains, self-assemble the benzene bisamides into a second packing pattern which leads to ribbon-like nano-objects. For both packing types, the preferentially exposed surfaces consist of the ends of the peripheral groups. Asymmetric substitution with bulky and slim groups leads to an ordered alternating arrangement of the groups exposed to the surface. This allows the hydrophobicity of the surfaces to be gradually altered. We thus identified two leitmotifs for molecular packings of benzene bisamides providing the missing link between the molecular structure, the anisotropic morphologies and adjustable surface properties of the supramolecular nano-objects.     

How to prevent the loss of surface functionality derived from aminosilanes

Aminosilanes are common coupling agents used to functionalize silica surfaces. A major problem in applications of 3-aminopropylsilane-functionalized silica surfaces in aqueous media was encountered: the loss of covalently attached silane layers upon exposure to water at 40 degrees C. This is attributed to siloxane bond hydrolysis catalyzed by the amine functionality. To address the issue of loss of surface functionality and to find conditions where hydrolytically stable amine-functionalized surfaces can be prepared, silanization with different types of aminosilanes was carried out. Hydrolytic stability of the resulting silane-derived layers was examined as a function of reaction conditions and the structural features of the aminosilanes. Silane layers prepared in anhydrous toluene at elevated temperature are denser and exhibit greater hydrolytic stability than those prepared in the vapor phase at elevated temperature or in toluene at room temperature. Extensive loss of surface functionality was observed in all 3-aminopropylalkoxysilane-derived layers, independent of the number and the nature of the alkoxy groups. The hydrolytic stability of aminosilane monolayers derived from N-(6-aminohexyl)aminomethyltriethoxysilane (AHAMTES) indicates that the amine-catalyzed detachment can be minimized by controlling the length of the alkyl linker in aminosilanes.     

The effect of alkyltrimethylammonium bromides on the thermal stability of dioctadecyldimethylammonium bromide (DOAB) vesicles in aqueous solutions

The influence of alkyl chain length in alkyltrimethylammonium bromides on the gel to liquid crystal transitions in DOAB versicles is examined using differential scanning microcalorimetric data. The changes in melting temperature, patch number and standard enthalpy of melting for DOAB vesicles depend strongly on added surfactants and their concentration. The data show that vesicles are readily penetrated by surfactant molecules when the vesicles are in the liquid crystal state and the penetration is facile when the length of alkyl chains in both surfactants and vesicles are comparable. Furthermore, the vesicles are made up of domains that differ in composition.     

Molecular dynamics simulations of ionic liquid-vapour interfaces: effect of cation symmetry on structure at the interface

The influence of alkyl chain symmetry of the imidazolium cation on the structure and properties of the ionic liquid-vapour interface has been addressed through molecular dynamics simulations. The anion chosen is bis(trifluoromethylsulfonyl)imide (NTf(2)). Profiles of number densities, orientation of cations, charge density, electrostatic potential, and surface tension have been obtained. At the interface, both cations and anions were present, and the alkyl chains of the former preferred to orient out into the vapour phase. A large fraction of cations preferred to be oriented with their ring-normal parallel to the surface and alkyl chains perpendicular to it. These orientational preferences are reduced in ionic liquids with symmetric cations. Although the charge densities at the interface were largely negative, an additional small positive charge density has been observed for systems with longer alkyl chains. The electrostatic potential difference developed between the liquid and the vapour phases were positive and decreased with increasing length of the alkyl group. The calculated surface tension of the liquids also decreased with increasing alkyl chain length, in agreement with experiment. The surface tension of an ionic liquid with symmetric cation was marginally higher than that of one with an asymmetric, isomeric cation.     

Structure and orientation of the imidazolium cation at the room-temperature ionic liquid/SiO2 interface measured by sum-frequency vibrational spectroscopy

In this study, we have examined both the effect of alkyl chain length and anion composition on the 1-alkyl-3-methylimidazolium (C(n)mim, n = 4, 6, 8, 10, and 12) structure and orientation at the room-temperature ionic liquid (RTIL)/SiO(2) interface by sum-frequency vibrational spectroscopy (SFVS). Four different anions were investigated in this study: tetrafluoroborate (BF(4)), hexafluorophosphate (PF(6)), bis(trifluoromethylsulfonyl)imide (BMSI), and bis(pentafluoroethylsulfonyl)imide (BETI). It was found that the alkyl chain in BMSI and BETI RTILs showed a decrease in gauche defects with an increase in chain length, whereas the alkyl chains of the BF(4) and PF(6) RTILs have virtually no gauche defects regardless of chain length. The tilt of the alkyl chain lies predominantly perpendicular to the surface for all the RTILs examined. A strong correlation between the HCCH vs tilt angle and alkyl chain length was observed; as the alkyl chain is lengthened the HCCH vs lies more perpendicular to the SiO(2) surface. The results of this study suggest that the length of the alkyl chain dictates to a large degree the orientation of the imidazolium cation at the surface, regardless of anion composition. To a lesser extent, the HCCH vs tilt of the imidazolium ring of the cation also appears to be correlated to the surface charge density of the SiO(2). As the SiO(2) surface charge density becomes more negative the HCCH vs tilt angle lies more parallel to the surface.     

Synthesis, characterization and phase transitions of the inorganic-organic layered perovskite-type hybrids [(C(n)H(2n+1)NH3)2PbI4], n = 7, 8, 9 and 10

Four inorganic-organic hybrid materials that consist of 2-D layers of corner-sharing lead(II) iodide octahedra separated by alkylammonium chains have been crystallized and characterized via single-crystal XRD (SCXRD). The four hybrids, represented by the general formula [(C(n)H(2n+1)NH(3))(2)PbI(4)] and abbreviated C(n)PbI, exhibit multiple reversible phase transitions for a narrow temperature range. The transition temperatures were determined with differential scanning calorimetry experiments. The number of transitions and the transition temperatures are dependant on the chain length; for n = 7 and 10, there are three transitions, and for n = 8 and 9, there are two transitions. Regardless of the number of transitions, all four compounds have identical lowest temperature phases, which have inorganic layers that are eclipsed, non-planar conformations of the alkyl ammonium chains and yellow-coloured crystals. The next highest temperature phase for three of the compounds (C(10)PbI goes through an intermediate phase first), has staggered inorganic layers, all-trans planar conformations of the chains and orange coloured crystals. The highest temperature phase for n = 8 and 10 has red-coloured crystals and shows a disordering of the alkylammonium chains over two positions and staggered inorganic layers. The high temperature phase of C(7)PbI retains its orange colour and has only increased thermal motion of its alkylammonium chain. The structure of the high temperature phase of C(9)PbI was not determined. The SCXRD structures of the various phases give clues to the structural changes that the compounds undergo at the phase transitions, which will now enable future studies of their optical and electronic properties to be better understood.     

Analysis of the phase transitions in alkyl-mica by density and pressure profiles

In a previous work [Heinz, Castelijns, and Suter, J. Am. Chem. Soc. 115, 9500 (2003)], we developed an accurate force field and simulated the phase transitions in C18-mica (octadecyltrimethylammonium-mica) as well as the absence of such transitions in 2C18-mica (dioctadecyldimethylammonium-mica) between room temperature and 100 degrees C. Here we analyze (i) average z coordinates of the carbon atoms and interdigitation of the hydrocarbon bilayers, (ii) density profiles, and (iii) pressure profiles of the structures along all Cartesian axes. In C18-mica, the standard deviation in the z coordinate for the chain atoms is high and more than doubles in the disordered phase. The order-disorder transition is accompanied by a change in the orientation of the ammonium head group, as well as decreasing tensile and shear stress in the disordered phase. In 2C18-mica, the standard deviation in the z coordinate for the chain atoms is low and does not increase remarkably on heating. The backbones display a highly regular structure, which is slightly obscured by rotations in the C18 backbones and minor head group displacements at 100 degrees C. Close contacts between the bulky head groups with sidearms cause significant local pressure which is in part not relieved at 100 degrees C. An increase of the basal-plane spacing at higher temperature is found in both systems due to larger separation between the two hydrocarbon layers and an increased z spacing between adjacent chain atoms (=decreased tilt of the chains relative to the surface normal), and, in C18-mica only, a stronger upward orientation of the C18 chain at the ammonium head group. The likelihood for chain interdigitation between the two hydrocarbon layers is 24%-30% for C18-mica, and 65%-26% for 2C18-mica (for 20-100 degrees C).     

Packing density and structure effects on energy-transfer dynamics in argon collisions with organic monolayers

A combined experimental and molecular-dynamics simulation study has been used to investigate energy-transfer dynamics of argon atoms when they collide with n-alkanethiols adsorbed to gold and silver substrates. These surfaces provide the opportunity to explore how surface structure and packing density of alkane chains affect energy transfer in gas-surface collisions while maintaining the chemical nature of the surface. The chains pack standing up with 12 degrees and 30 degrees tilt angles relative to the surface normal and number densities of 18.9 and 21.5 A(2)molecule on the silver and gold substrates, respectively. For 7-kJmol argon scattering, the two surfaces behave equivalently, fully thermalizing all impinging argon atoms. In contrast, these self-assembled monolayers (SAMs) are not equally efficient at absorbing the excess translational energy from high-energy, 35 and 80 kJmol, argon collisions. When high-energy argon atoms are scattered from a SAM on silver, the fraction of atoms that reach thermal equilibrium with the surface and the average energy transferred to the surface are lower than for analogous SAMs on gold. In the case of argon atoms with 80 kJmol of translational energy scattering from long-chain SAMs, 60% and 45% of the atoms detected have reached thermal equilibrium with the monolayers on gold and silver surfaces, respectively. The differences in the scattering characteristics are attributed to excitation efficiencies of different types of surface modes. The high packing density of alkyl chains on silver restricts certain low-energy degrees of freedom from absorbing energy as efficiently as the lower-density monolayers. In addition, molecular-dynamics simulations reveal that the extent to which argon penetrates into the monolayer is related to packing density. For argon atoms with 80-kJmol incident energy, we find 16% and 7% of the atoms penetrate below the terminal methyl groups of C(10) SAMs on gold and silver, respectively.