多单体接枝聚丙烯对PBT/PP共混体系的形态结构及力学性能影响研究

研究了甲基丙烯酸缩水甘油酯 (GMA)和苯乙烯 (St)多单体熔融接枝聚丙烯 (PP g (GMA co St) )对聚对苯二甲酸丁二酯 (PBT) 聚丙烯 (PP)共混物的形态结构和力学性能的影响 .利用双螺杆挤出机对PBT PP合金进行共混挤出 ,使用DSC、FT IR和SEM、TEM等手段对共混物进行了分析和相形态观察 ,并测试了力学性能 .实验证明 ,熔融共混过程中PP g (GMA co St)的环氧基团可以与PBT的端羧基发生化学反应 ,就地生成了PBT g PP共聚物 ,该共聚物可对PBT PP合金起到良好的增容剂作用 ,使共混物的相区尺寸显著减小 ,共混物的拉伸强度和冲击强度等力学性能同时得到明显改善 ,达到了弹性体系或小分子增容所难以达到的力学性能平衡的效果 .此外 ,TEM的研究还在PBT PP g (GMA co St)共混物中发现了特殊的微相分离结构     

EPM-g-GMA接枝率的测定及其增韧PBT的力学性能和形态结构研究

在同向双螺杆挤出机中通过熔融接枝反应制备了EPM g GMA ,将其与PBT在转矩流变仪中熔融共混可以获得增韧的PBT工程塑料 .实验中EPM g GMA接枝率的测定采用红外工作曲线法 ,选用CCl4 做溶剂以避免溶剂对样品吸收峰的干扰 .随着EPM g GMA接枝率的增加 ,PBT EPM g GMA的缺口冲击强度相应提高 ,共混物中EPM g GMA的粒径尺寸减小 ,当EPM g GMA的接枝率为 4 7mL 1 0 0gEPM时 ,EPM g GMA的粒径尺寸可达 0 5 μm ,PBT EPM g GMA的缺口冲击强度达到 5 1 6kJ m2 ,是纯PBT的 3 1倍     

聚丁二酸丁二醇酯与氯醚弹性体协同增韧改性聚乳酸多元共混体系

以来源于可再生资源聚丁二酸丁二醇酯(PBS)和氯醚橡胶(ECO)作为聚乳酸(PLA)的增韧改性剂,通过熔融共混的方法制备了PLA/PBS/ECO三元共混体系。动态力学分析和扫描电子显微镜结果表明,ECO促进了PBS和PLA之间的相容性。力学性能测试表明,ECO与PBS可实现对聚乳酸基体的协同增韧: PLA/PBS/ECO(70/20/10)显示出最优的拉伸性能,断裂伸长率高达270%;PLA/PBS/ECO(70/10/20)的冲击强度提高至23.7 kJ/m²,是纯聚乳酸的12倍。结合形态结构和冲击断面形貌分析表明ECO的存在可起到增容/增韧双重作用, 与柔性PBS产生良好的协同效应,有效改善聚乳酸材料的韧性。我们的研究表明,构造PLA-柔性生物聚酯和生物基弹性体多元共混体系是一种获得高性能生物基材料简单高效的手段。     

PP—g—（GMA—co—St）对PA6—PC共混合的反应增容作用

用红外、扫描电镜、熔体流动速率和力学性能等测试方法,研究了甲基丙烯酸缩水甘油酯（GMA）和苯乙烯（St）多单体熔融接枝聚丙烯PP－g-(GMA-co-St)对PA6－PC共混合的反应增容作用。研究结果表明,在熔融共混过程中,PP－g-(GMA-co-St)中的环氧基与PA6的端氨基及PC的端羟基原位生成的接枝共聚物就有效地降低了共混物相间的界面张力,明显提高了共混物相界面的粘着力。少量的PP－g-(GMA-co-St)就能使PA6和PC的相容性得到显著改善。当PP－g-(GMA-co-St)的质量分数为10％时,共混物分散相的相区尺寸细化到0．2μm,其力学性能也有较大提高。PA6／PC／PP－g-(GMA-co-St)共混物的力学性能均衡,达到了弹性体增韧体系难以达到的效果。即使PP－g-(GMA-co-St)组分含量为20％时,共混物仍能保持较好的力学性能,特别是在共混物地韧性得以提高的同时,其强度和伸长率也提高。     

剪切作用下马来酸酐接枝乙烯-辛烯共聚物和乙烯-丙烯酸丁酯-甲基丙烯酸缩水甘油酯共聚物对PA1010/PP共混物的增容作用比较

采用熔体共混的方法制备了两种增容剂增容的聚酰胺1010/聚丙烯(PA1010/PP)共混物,通过扫描电镜(SEM)、力学性能和差示扫描量热(DSC)测试,对动态保压注射成型(动态)和普通注射成型(静态)中增容剂POE-g-MAH(马来酸酐接枝乙烯-辛烯共聚物)和PTW(乙烯-丙烯酸丁酯-甲基丙烯酸缩水甘油酯共聚物)对PA1010/PP共混物的增容作用进行了比较研究.研究结果表明,普通注射成型中,PTW增容体系具有更小的分散相粒子,在DSC测试中出现两个结晶峰,即出现异相成核结晶和均相成核结晶,具有更好的拉伸和冲击性能,增容作用更佳.动态保压注射成型中施加剪切可以提高所有共混物的拉伸强度、拉伸模量和缺口冲击强度,PTW和POE-g-MAH两种增容剂增容体系冲击性能相近,但POE-g-MAH增容体系的分散相相区尺寸减小明显、分布均匀性显著增加,材料冲击强度增加幅度更大,表明剪切更有利于POE-g-MAH增容作用的进行.两种增容剂增容作用的不同源于它们化学组成的不同引起的材料形态差别.     

壳-核结构增韧剂超高增韧非晶共聚酯的形貌和形态

研究了马来酸酐接枝的壳核结构增韧剂 (TPEg)对非晶热塑共聚酯 (PETG)的增韧和增强效果 ,并与马来酸酐接枝的纯橡胶类增韧剂 (POEg)作了对比 .TPEg对PETG具有显著的增韧效果 ,当TPEg含量由 5%增加到 1 0 %时 ,共混物就可以发生由脆性到超高韧性的快速转变 .而POEg虽然也可以使PETG发生由脆性到韧性的快速转变 ,但转变是在较高的增韧剂含量下发生的 ,这意味着共混物的抗张强度和模量损失更多 .利用扫描电镜观察、分析了随增韧剂含量的增加 ,共混物的形貌、形态的演化过程 .共混物的缺口冲击韧性与其形貌、形态之间存在很好的对应关系 .     

环氧基团功能化弹性体增韧聚乳酸的性能

以2种不同结构的弹性体乙烯-辛烯共聚物接枝甲基丙烯酸缩水甘油酯(POE-g-GMA)和乙烯-丙烯酯甲酯-甲基丙烯酯缩水甘油酯三元共聚物(E-MA-GMA)增韧聚乳酸(PLA), 研究了接枝型与嵌段型弹性体的结构对聚乳酸增韧效果的影响. 结果表明, 接枝型聚合物POE-g-GMA与基体PLA之间具有良好的界面相互作用, 当POE-g-GMA的质量分数为15%时, 共混体系的缺口冲击强度为72.4 kJ/m², 而E-MA-GMA的质量分数为15%时, 共混体系的缺口冲击强度为32.4 kJ/m², 结果表明, 接枝型聚合物POE-g-GMA增韧效果明显优于嵌段型E-MA-GMA.     

相容剂对PP/POE共混体系脆韧转变行为的影响

采用熔融挤出法制备了不同相容剂含量的PP/POE共混体系,测试了不同体系的脆韧转变温度、热性能和力学性能.结果表明,乙烯-丙烯多嵌段共聚物相容剂的加入降低了PP/POE共混物的脆韧转变温度,提高了共混物的韧性.AFM和STEM照片显示相容剂的加入减小了橡胶分散相的临界粒子间距,PP和POE在两相界面结合处相互扩散或渗透,实现了POE弹性体在PP树脂中合适的尺度分布以及良好的形态分散.当相容剂含量达到10％时,POE分散相尺寸细小均匀,分散相粒子粒径为0.54μm,粒子间距为0.1 μm,PP结晶链段更多地插入到弹性体内部,弹性体POE分散相形成明显的“硬核-软壳”结构.DSC曲线中结晶峰和熔融峰的变化说明适量的相容剂对于材料结晶度的提高具有一定的促进作用.力学性能测试结果可以看出相容剂的加入在提高材料韧性,降低其脆韧转变温度的同时也保持了材料的刚性性能.     

PP-g-(GMA-co-St)对PA6/PC共混物的反应增容作用

用红外、扫描电镜、熔体流动速率和力学性能等测试方法,研究了甲基丙烯酸缩水甘油酯(GMA)和苯乙烯(St)多单体熔融接枝聚丙烯[PP-g-(GMA-co-St)]对PA6/PC共混物的反应增容作用.研究结果表明,在熔融共混过程中,PP-g-(GMA-co-St)中的环氧基与PA6的端氨基及PC的端羟基原位生成的接枝共聚物有效地降低了共混物相间的界面张力,明显提高了共混物相界面的粘着力.少量的PP-g-(GMA-co-St)就能使PA6和PC的相容性得到显著改善.当PP-g-(GMA-co-St)的质量分数为10%时,共混物分散相的相区尺寸细化到0.2μm,其力学性能也有较大提高.PA6/PC/PP-g-(GMA-co-St)共混物的力学性能均衡,达到了弹性体增韧体系难以达到的效果.即使PP-g-(GMA-co-St)组分含量为20%时,共混物仍能保持较好的力学性能,特别是在共混物的韧性得以提高的同时,其强度和伸长率也提高.     

动态固化聚丙烯/环氧树脂共混物的研究

将动态硫化技术应用于热塑性树脂 热固性树脂体系 ,制备了动态固化聚丙烯 (PP) 环氧树脂共混物 .研究了动态固化PP 环氧树脂共混物中两组分的相容性、力学性能、热性能和动态力学性能 .实验结果表明 ,马来酸酐接枝的聚丙烯 (PP g MAH)作为PP和环氧树脂体系的增容剂 ,使分散相环氧树脂颗粒变细 ,增加了两组分的界面作用力 ,改善了共混物的力学性能 .与PP相比 ,动态固化PP 环氧树脂共混物具有较高的强度和模量 ,含 5 %环氧树脂的共混物拉伸强度和弯曲模量分别提高了 30 %和 5 0 % ,冲击强度增加了 15 % ,但断裂伸长率却明显降低 .继续增加环氧树脂的含量 ,共混物的拉伸强度和弯曲模量增加缓慢 ,冲击强度无明显变化 ,断裂伸长率进一步降低 .动态力学性能分析 (DMTA)表明动态固化PP 环氧树脂共混物是两相结构 ,具有较高的储能模量 (E′)     

Preparation of core‐shell structured particle and its application in toughening PA6/PBT blends

Combining the excellent mechanical strengths of polyamide 6 (PA6) with the low water absorption of poly(butylene terephthalate) (PBT) was supposed to be a feasible way to prepare a high comprehensive performance material. However, the poor compatibility between PA6 and PBT resulted in low‐notched impact strength of PA6/PBT blends. Poly(n‐butyl acrylate)/poly(methyl methacrylate‐co‐methacrylic acid) (PBMMA), a core‐shell structured modifier with controlled particle sizes, was prepared by seed emulsion polymerization and confirmed by Transmission electron microscope (TEM). The PBMMA particles as toughening modifier and compatilizer were employed to toughen PA6/PBT blends. The notched impact strength of the PA6/PBT blends was significantly increased and the water absorption was reduced with the addition of PBMMA particles. With 23.0 wt% modifier loading, the notched impact strength of the blends was 25.66 kJ/m², which was 4.04 times higher than that of pure PA6/PBT. Meanwhile, the water absorption of the blends was only 1.3%, dropping 53.6% compared with pure PA6 and reducing by 26.6% than PA6/PBT. Scanning electron microscope results showed that the PBMMA particles were dispersed in the PA6/PBT blends homogeneously, and the toughening mechanism was the cavitation of rubber particles and shear yielding of the matrix. Thermo‐gravimetric analysis analysis demonstrated that the compatibility between PA6 and PBT was improved with the addition of core‐shell PBMMA particles. The core‐shell particles could be used as an effective modifier to achieve the high toughness and low water absorption for PA6/PBT blends. Copyright © 2016 John Wiley & Sons, Ltd.     

Toughening of a copolyester with a maleated core‐shell toughener

A reactive extrusion process was developed to toughen an amorphous copolyester (PETG) of ethylene glycol, terephthalic acid and 1,4‐cyclohexanedimethanol using either a maleic anhydride grafted polyethylene–octene elastomer (POEg), or a maleic anhydride grafted mixture (TPEg) of the polyethylene–octene elastomer and a semicrystalline polyolefin plastic as the impact modifier. TPEg showed an important toughening effect on the PETG. A sharp ductile‐brittle transition was observed when the TPEg content was about 10 wt %. For POEg toughened PETG, the ductile–brittle transition required a higher content in POEg, ∼15 wt %. Evolution of the topography and morphology of the blends and the relationship between impact strength and topography were discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2801–2809, 2000     

羟基不饱和脂肪酸改性纳米碳酸钙对聚丙烯微观形态和流变性能的影响

采用羟基不饱和脂肪酸,通过固相法对硬脂酸改性的工业纳米碳酸钙CCR进行表面改性制备了R-CCR,红外光谱(FTIR)显示改性剂已结合在碳酸钙表面.通过熔融共混法制备了聚丙烯(PP)/乙丙橡胶(EPDM)/纳米碳酸钙二元和三元复合材料.并利用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察复合材料的微观形态,发现R-CCR的加入,使PP复合材料的拉伸断面出现明显的拉丝状结构和大面积的屈服变形,与PP/EPDM/CCR相比,PP/EPDM/R-CCR冲击断面的空穴明显增加并细化,R-CCR在PP基体中分散均匀,且界面模糊,与基体的相容性明显优于CCR.复合材料流变行为的研究表明R-CCR的加入,体系储存模量G′和损耗模量G″随频率的增加而增加,对损耗因子和复数粘度的影响不大;但PP/EPDM/R-CCR复合材料的表观粘度,明显低于PP/EPDM/CCR和纯PP,同时,剪切速率的增加可有效降低体系的表观粘度.力学性能表明,R-CCR对PP同时起到增韧和增强的效果.且R-CCR和EPDM对PP具有协同增韧的效果.在保持聚丙烯的模量和强度基本不变的前提下,大幅度的改善聚丙烯的韧性,同时加工性能保持不变.     

TOUGHENING OF POLYCARBONATE WITH PBA-PMMA CORE-SHELL PARTICLES

The miscibility, mechanical properties, morphology and toughening mechanism of PC/PBA-PMMA blends were investigated. The dynamic mechanical results show that PC/PBA-PMMA blend has good miscibility and strong interfacial adhesion. The Izod impact strength of blend PC/PBA-PMMA with 4% (volume fraction) PBA-PMMA core-shell modifier is 16 times higher than that of pure PC. The core-shell volume fraction and thickness of the PMMA shell have effect on the toughness of PC/PBA-PMMA blends. As PMMA volume fraction increases, the toughness of PC/PBA-PMMA blend increases, and reaches a maximum value at 30% volume fraction of PMMA or so. The tensile properties of PC/PBA-PMMA blend with a minimum amount of PBA-PMMA modifier show that brittle-tough transition has no significant variance in comparison with that of pure PC. The scanning electron microscopic (SEM) observation indicates that the toughening mechanism of the blend with the pseudo-ductile matrix modified by small core-shell latex polymer particles is the synergetic effect of cavitation and shear yielding of the matrix.     

Effect of Epoxy Resin on the Thermal,Mechanical and Rheological Properties of Polybutylene Terephthalate/Glycidyl Methacrylate Functionalized Methyl Methacrylate-butadiene Blend

Epoxy resin was used to modify polybutylene terephthalate(PBT) and glycidyl methacrylate functionalized methyl methacrylate-butadiene(MB-g-GMA) blend. Results show that MB-g-GMA dispersed in PBT matrix uniformly and PBT/MB-g-GMA/epoxy blends reveal good compatibility. However, the added epoxy resin restricted the mobility of PBT macromolecular chains during the growth process of the crystal, which reduced the final crystallinity of PBT. The PBT/MB-g-GMA blend containing 1%(mass fraction) epoxy resin exhibited good mechanical properties. For example, the notched impact strength of the PBT/MB-g-GMA blend with 1%(mass fraction) epoxy resin was about 2 times that of PBT/MB-g-GMA blend. Sanning electron microscope(SEM) results show that the shear yielding of the PBT matrix and the cavitations of rubber particles were the major toughening mechanisms. The chemical reaction between PBT and epoxy resin induced the high complex viscosity and storage modulus of PBT/MB-g-GMA blend.     

三元乙丙橡胶环氧化增韧聚对苯二甲酸丁二酯的研究

三元乙丙橡胶环氧化增韧聚对苯二甲酸丁二酯的研究王学会，张会轩，王新华，王志刚，蒋俊光，姜炳政（吉林工学院化工系，长春，１３００１２）（中国科学院长春应用化学研究所）关键词三元乙丙橡胶，环氧化，ＰＢＴ，增韧作用，共混物聚对苯二甲酸丁二酯（ＰＢＴ）具有优...