Aggregation‐Controlled Excimer Emission from Anthracene‐Containing Polyamidoamine Dendrimers

Lower generations of polyamidoamine (PAMAM) dendrimers were peripherally modified with anthracene moieties, and excimer emission from anthracene chromophores was investigated in an acetonitrile–water mixture at acidic and basic pH values. Results from fluorescence spectroscopic experiments suggest that 1) the propensity of anthracene‐modified PAMAM dendrimers to aggregate in acetonitrile is substantial in the presence of 15–20 vol % of water, and 2) aggregate formation in anthracene‐modified PAMAM dendrimers leads to unique morphologies in the ground state, where the anthracene units are pre‐arranged to form stable excimers upon photoexcitation. Three types of anthracene excimers are generated in the system, with face‐to‐face, angular, and T‐shaped geometry. The formation of different types of anthracene excimers was confirmed by steady‐state and time‐resolved fluorescence spectroscopic experiments. Experimental results further suggest that it is feasible to alter the type of excimer formed by anthracene units attached to the PAMAM dendrimers through altering the propensity for ground‐state aggregation. Most excitingly, increased π conjugation in the molecular framework of anthracene‐substituted PAMAM dendrimers leads to intense and exclusive excimer emission from anthracene at room temperature.     

以聚酰胺-胺树形分子为模板制备AgI纳米簇

本文以聚酰胺-胺(PAMAM)树形分子为模板,原位制备AgI纳米簇.系统地研究了AgI纳米簇制备过程中各种反应条件如树形分子端基、反应时间、Ag⁺与PAMAM摩尔比等对AgI纳米簇粒径的影响,分别用紫外-可见光谱、荧光光谱、透射电镜等对所制备的纳米簇进行表征.在相同的条件下,以G4.5-COOH₃为模板较以G5.0-NH₂为模板制备的AgI纳米簇粒径小、分布均匀,这主要取决于G4.5-COOCH₃PAMAM树形分子所起的“内模板”作用.G4.5-COOH₃树形分子浓度为1×10^-5mol/L,Ag⁺与树形分子摩尔比为30:1时所制备的AgI纳米簇的粒径分布均匀、稳定性好,室温避光可稳定存在两个月以上.     

Preparation of PAMAM- and PPI-metal (silver, platinum, and palladium) nanocomposites and their catalytic activities for reduction of 4-nitrophenol

Dendrimer-metal (silver, platinum, and palladium) nanocomposites are prepared in aqueous solutions containing poly(amidoamine) (PAMAM) dendrimers with surface amino groups (generations 3, 4, and 5) or poly(propyleneimine) (PPI) dendrimers with surface amino groups (generations 2, 3, and 4). The particle sizes of the metal nanoparticles obtained are almost independent of the generation as well as the concentration of the dendrimer for both the PAMAM and the PPI dendrimers; the average sizes of silver, platinum, and palladium nanoparticles are 5.6-7.5, 1.2-1.6, and 1.6-2.0 nm, respectively. It is suggested that the dendrimer-metal nanocomposites are formed by adsorbing the dendrimers on the metal nanoparticles. Studies of the reduction reaction of 4-nitrophenol by these nanocomposites show that the rate constants are very similar between PAMAM and PPI dendrimer-silver nanocomposites, whereas the rate constants for the PPI dendrimer-platinum and -palladium nanocomposites are greater than those for the corresponding PAMAM dendrimer nanocomposites. In addition, it is found that the rate constants for the reduction of 4-nitrophenol involving all the dendrimer-metal nanocomposites decrease with an increase in the dendrimer concentrations, and the catalytic activity of dendrimer-palladium nanocomposites is highest.     

Extraction of Au nanoparticles having narrow size distributions from within dendrimer templates

Here, we show that Au nanoparticles having diameters of less than 2.2 nm can be extracted from within the interior of PAMAM dendrimers using n-alkanethiol extractants. Extraction proceeds quickly, regardless of the size of the nanoparticle, the dendrimer generation, or the peripheral functionalization of the dendrimer. The extraction rate is fastest for the lowest generation dendrimers, the smallest nanoparticles, and the shortest chain-length n-alkanethiols. Other important results of this study include the following. First, within the accuracy of absorbance spectroscopy, the extraction yield is quantitative. Second, NMR and FT-IR spectroscopy indicate that after extraction the dendrimer remains in the aqueous phase and can be used to template additional metal particles. Third, the size and optical characteristics of the extracted nanoparticles are the same as the precursor dendrimer-encapsulated nanoparticles (DENs). Fourth, a 100-fold excess of n-alkanethiol molecules is required to prevent aggregation of DENs during extraction.     

Dendritic chelating agents. 1. Cu(II) binding to ethylene diamine core poly(amidoamine) dendrimers in aqueous solutions

This paper describes an investigation of the uptake of Cu(II) by poly(amidoamine) (PAMAM) dendrimers with an ethylenediamine (EDA) core in aqueous solutions. We use bench scale measurements of proton and metal ion binding to assess the effects of (i) metal ion-dendrimer loading, (ii) dendrimer generation/terminal group chemistry, and (iii) solution pH on the extent of binding of Cu(II) in aqueous solutions of EDA core PAMAM dendrimers with primary amine, succinamic acid, glycidol, and acetamide terminal groups. We employ extended X-ray absorption fine structure (EXAFS) spectroscopy to probe the structures of Cu(II) complexes with Gx-NH2 EDA core PAMAM dendrimers in aqueous solutions at pH 7.0. The overall results of the proton and metal ion binding measurements suggest that the uptake of Cu(II) by EDA core PAMAM dendrimers involves both the dendrimer tertiary amine and terminal groups. However, the extents of protonation of these groups control the ability of the dendrimers to bind Cu(II). Analysis of the EXAFS spectra suggests that Cu(II) forms octahedral complexes involving the tertiary amine groups of Gx-NH2 EDA core PAMAM dendrimers at pH 7.0. The central Cu(II) metal ion of each of these complexes appears to be coordinated to 2-4 dendrimer tertiary amine groups located in the equatorial plane and 2 axial water molecules. Finally, we combine the results of our experiments with literature data to formulate and evaluate a phenomenological model of Cu(II) uptake by Gx-NH2 PAMAM dendrimers in aqueous solutions. At low metal ion-dendrimer loadings, the model provides a good fit of the measured extent of binding of Cu(II) in aqueous solutions of G4-NH2 and G5-NH2 PAMAM dendrimers at pH 7.0.     

Charging and aggregation of latex particles by oppositely charged dendrimers

Poly(amidoamine) (PAMAM) dendrimers were shown to adsorb strongly on negatively charged latex particles, and their effect on the particle charge and aggregation behavior was investigated by light scattering and electrophoretic mobility measurements. Time-resolved simultaneous static and dynamic light scattering was used to measure absolute aggregation rate constants. With increasing dendrimer dose, the overall charge could be tuned from negative to positive values through the isoelectric point (IEP). The aggregation is fast near the IEP and slows down further away. With decreasing ionic strength, the region of fast aggregation narrows and the dependence of the aggregation rate on the dendrimer dose is more pronounced. Surface charge heterogeneities become important for higher dendrimer generations. They widen the fast aggregation region, reduce the dependence of the aggregation rate on the dendrimer dose, and lead to an acceleration of the rate in the fast aggregation regime near the IEP. The ratio of the dendrimer charge and the particle charge exceeds the stoichiometric ratio of unity substantially and further increases with increasing generation. The tentative interpretation of such superstoichiometric charge neutralization involves coadsorption of anions and the finite thickness of the adsorbed dendrimer layer.     

Comparison of PAMAM-Au and PPI-Au nanocomposites and their catalytic activity for reduction of 4-nitrophenol

Dendrimer-Au nanocomposites are prepared in aqueous solutions using poly(amidoammine)dendrimers (PAMAM) (generation 2, 3, and 5) and poly(propyleneimine)dendrimers (PPI)(generation 2, 3, and 4) by wet chemical NaBH(4) method. The Au nanoparticles thus obtained are 2-4 nm in diameter for both dendrimers and no generation dependence on the particle size is observed, whereas the generations of the dendrimers are increased as stabilization of Au-nanoparticles is achieved with lower dendrimer concentrations. Studies of the reduction reaction of 4-nitrophenol using these nanocomposites show that the rate constants for the PAMAM dendrimers (generations 2 and 3) are higher than those for the PPI dendrimers (generations 2 and 3), while a distinct difference in the rate constants is not seen for the PAMAM dendrimer (generation 5) or the PPI dendrimer (generation 4). In addition, the rate constants for the reduction of 4-nitrophenol involving all the dendrimers decrease with increases in dendrimer concentrations.     

EPR study of the interactions between dendrimers and peptides involved in Alzheimer's and prion diseases

Spin-probe and spin-label techniques were used to study the interactions of the Abeta 1-28 peptide involved in Alzheimer disease and the PrP 106-126 peptide suspected to be preferentially involved in spongiform encephalopathies with three different types of dendrimers. A computer-aided EPR analysis of a positively charged and a neutral spin probe was performed by comparing the pure dendrimer and peptide systems with the dendrimer-peptide ones. Also spin-labeled PAMAM dendrimers were used to test the interactions. The results show the interactions between dendrimer and peptide monomer to be stronger for Abeta 1-28 than for PrP 106-126. PAMAM dendrimers perturb the aggregation of the peptides more than PPI dendrimers do.     

Nanoscale protein pores modified with PAMAM dendrimers

We describe nanoscale protein pores modified with a single hyperbranched dendrimer molecule inside the channel lumen. Sulfhydryl-reactive polyamido amine (PAMAM) dendrimers of generations 2, 3 and 5 were synthesized, chemically characterized, and reacted with engineered cysteine residues in the transmembrane pore alpha-hemolysin. Successful coupling was monitored using an electrophoretic mobility shift assay. The results indicate that G2 and G3 but not G5 dendrimers permeated through the 2.9 nm cis entrance to couple inside the pore. The defined molecular weight cutoff for the passage of hyperbranched PAMAM polymers is in contrast to the less restricted accessibility of flexible linear poly(ethylene glycol) polymers of comparable hydrodynamic volume. Their higher compactness makes sulfhydryl-reactive PAMAM dendrimers promising research reagents to probe the structure of porous membrane proteins with wide internal diameters. The conductance properties of PAMAM-modified proteins pores were characterized with single-channel current recordings. A G3 dendrimer molecule in the channel lumen reduced the ionic current by 45%, indicating that the hyperbranched and positively charged polymer blocked the passage of ions through the pore. In line with expectations, a smaller and less dense G2 dendrimer led to a less pronounced current reduction of 25%. Comparisons to recordings of PEG-modified pores revealed striking dissimilarities, suggesting that differences in the structural dynamics of flexible linear polymers vs compact dendrimers can be observed at the single-molecule level. Current recordings also revealed that dendrimers functioned as ion-selectivity filters and molecular sieves for the controlled passage of molecules. The alteration of pore properties with charged and hyperbranched dendrimers is a new approach and might be extended to inorganic nanopores with applications in sensing and separation technology.     

New cyclen-cored dendrimers functionalized with pyrene: Synthesis characterization,optical and photophysical properties

New cyclen (1,4,7,10-teraazacyclododecane) cored dendrimers up to the second generation, functionalized with 4, 8 and 16 pyrene units, respectively, were synthesized following a convergent procedure. All new compounds were characterized by NMR spectroscopies and ESI or MALDI TOF mass spectrometry. The optical and photophysical properties of the new dendrimers were studied in THF solution. Absorption spectra showed the typical absorption bands of pyrene moieties. In the fluorescence spectra, monomer as well as excimer emission were observed for all compounds. An increased proportion of excimer emission was observed in the dendrimer of the highest generation.     

PAMAM树形分子与Cd2＋的配位作用研究及CdS/PAMAM纳米复合材料的制备与表征

CdS半导体纳米簇具有独特的光、电性能, 如何制备均匀分散的、能够稳定存在的CdS纳米簇是目前的研究热点之一. 以聚酰胺-胺(PAMAM)树形分子为模板, 原位合成了CdS纳米簇. 首先用UV-Vis分光光度法研究了与树形分子的配位机理, 得出G4.5和G5.0的平均饱和配位数分别为16和34, 并发现在G4.5PAMAM树形分子中Cd^2＋主要与最外层叔胺基配位, 在G5.0PAMAM树形分子中Cd^2＋主要与最外层伯胺基配位. 酯端基的G4.5的模板作用要明显优于胺端基的G5.0. 通过改变Cd^2＋与G4.5树形分子的摩尔比可以得到不同粒径的CdS纳米簇. 溶液的pH值对CdS纳米簇影响很大, pH在7.0左右制备的CdS纳米簇粒径小而均匀, 且溶液稳定性高. 用UV-Vis分光光度计和TEM对CdS纳米簇的大小和形貌进行了表征. 结果表明TEM观测CdS纳米簇的粒径要大于用Brus公式的估算值.     

Chiral dendrimer encapsulated Pd and Rh nanoparticles

The synthesis of a series of chiral PAMAM dendrimers and the formation of chiral dendrimer encapsulated metal nanoparticles are described.     

紫外光辐照下以PAMAM树形分子为模板制备Ag纳米簇及光致发光性能研究

以G5.0-OH PAMAM树形分子为模板,用紫外光辐照法制备银纳米簇.用透射电子显微镜、紫外-可见吸收光谱和共振散射光谱等对所制备的银纳米簇进行了表征.结果表明:用紫外光辐照法可以制备尺寸分布均匀、稳定的银纳米簇;且辐照时间、PAMAM树形分子的浓度及Ag⁺/PAMAM树形分子的摩尔比都会对所制备的银纳米簇产生较大的影响.由于所制备的银纳米簇的粒径小于树形分子的流体力学半径,表明树形分子起到了“内模板”作用.同时研究了银纳米簇的尺寸对其光致发光性能的影响,发现通过调节银纳米簇的尺寸可实现其光致发光的可调性.     

Polyethylene glycol-polyamidoamine dendritic micelle as solubility enhancer and the effect of the length of polyethylene glycol arms on the solubility of pyrene in water

Unimolecular dendritic micelles designed as solubility enhancers were obtained by coupling polyethylene glycol (PEG) to Starburst polyamidoamine (PAMAM) dendrimers. Micelles-750, -2000, and -5000 have a generation 3.0 dendrimer core (32 primary amine end groups) and PEG arms with molecular weights of 750, 2000, and 5000, respectively. The conjugate of dendrimer core and PEG was characterized by MALDI-TOF MS and 1H NMR. 1H NMR was also used to estimate the average number of PEG arms on each dendrimer molecule. A typical hydrophobic compound, pyrene, was sonicated in an excess amount together with micelles at 50 degrees C for 6 h to produce its saturated water solution. The change of the solubility of pyrene was monitored at 334 nm, its maximum adsorption wavelength, by UV-VIS spectra. Concentrated micelles tended to dissolve more pyrene. However, there is no obvious linear relationship between micelle type and the amount of pyrene entrapped within micelles. Micelle-2000 could solubilize more pyrene than micelle-750. It is hypothesized that micelle-5000 did not solubilize more pyrene than micelle-2000 because of the PEG shell disruption by adjacent interpenetration of individual micelles when PEG arm length increased.     

Cu2+-induced blue shift of the pyrene excimer emission: a new signal transduction mode of pyrene probes

A pentiptycene-bispyrenyl system (1) has been synthesized and investigated as a fluorescent chemosensor for metal ions. A novel blue shift along with an intensity enhancement of the pyrene excimer emission is observed for 1 in the presence of Cu(2+). Such a new signal transduction mode of pyrene probes results from the formation of a static pyrene excimer that has very different characteristics from its dynamic counterpart.     

The characterization of high generation poly(amidoamine) G9 dendrimers by atomic force microscopy (AFM)

Scanning force microscopy (AFM) has been employed to characterize the generation‐9 (G9) poly(amidoamine) (PAMAM) dendrimer packing on a mica surface under various conditions. Well ordered 2‐D arrays from hexagonally packed particles of PAMAM (G9) dendrimers (11.4nm in diameter) were deposited on the mica surface. This may be one of the smallest regular monolayer arrays ever observed. The mechanism considered to be responsible for this 2‐D array packing is the interaction of forces between the dendrimer and the mica surface and between dendrimer molecules as well. Other factors such as molecular interpenetrating and the rigidity of the branch structure obviously play an important role in the 2‐D array formation.     

Morphological change of gold-dendrimer nanocomposites by laser irradiation

Gold-dendrimer nanocomposites are prepared in aqueous solutions in the presence of poly(amidoamine)dendrimers (PAMAM) (generation 3 and 5) or poly(propyleneimine)dendrimers (PPI) (generation 3 and 4) by wet chemical NaBH(4) method. Thus prepared gold-dendrimer nanocomposites are irradiated by laser at 532 nm. UV-vis absorption spectroscopy and transmission electron microscopy reveal that the gold nanoparticles grow with the laser irradiation time as well as the fluence of the laser; in particular, the gold nanoparticles prepared at lower concentrations of PAMAM dendrimer as well as lower generations of PAMAM grow significantly. On the other hand, in the case of PPI dendrimers, the gold nanoparticles hardly grow by irradiation. In addition, dynamic light-scattering measurements show that the laser irradiation markedly promotes the association of the gold-PAMAM G3 dendrimer nanocomposites compared to that of the gold-PAMAM G5 dendrimer nanocomposites, while the sizes of association for the gold-PPI G3, G4 dendrimer nanocomposites hardly change by laser irradiation.     

Effects of catalyst introduction methods using PAMAM dendrimers on selective electroless nickel deposition on polyelectrolyte multilayers

We studied the effects of catalyst introduction methods using poly(amidoamine) (PAMAM) dendrimers on the nickel patterning of polyelectrolyte multilayer (PEM)-coated substrates. Three different approaches to palladium catalyst introduction using microcontact printing as the patterning technique were utilized and compared. The catalyst introduction methods are (1) direct catalyst stamping, (2) directed assembly using PAMAM dendrimer stamping, and (3) catalyst encapsulation and reduction to nanoparticles within PAMAM dendrimers before stamping. After patterning, the sample surfaces were placed in an electroless bath where nickel was selectively plated onto the patterns. The patterned surfaces were characterized using optical microscopy, atomic force microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The metal plating rates on different homogeneous surfaces that simulate the patterned surfaces were measured using a quartz crystal microbalance. In addition, the effect of PEM film thickness (i.e., number of bilayers) on the selectivity of nickel patterning was investigated.     

Self‐assembly of a new class of amphiphilic poly(amidoamine) dendrimers and their electrochemical properties

Amphiphilic poly(amidoamine) (PAMAM) dendrimers consisting of a hydrophilic dendrimer core and hydrophobic aromatic dansyl or 1‐(naphthalenyl)‐2‐phenyldiazene (NPD) shells have been synthesized. These amphiphilic dendrimers from the zero generation to the third generation self‐assemble into vesicular aggregates in water. The self‐assembly behavior of these dendrimers strongly depends on their generations. The generation dependence has been further investigated by an exploration of their electrochemical properties. For the PAMAM–NPD aggregates, the photoisomerization process leads to a change in the aggregate size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5512–5519, 2005     

Specific binding structures of dendrimers on lipid bilayer membranes

Dissipative particle dynamics simulations are used to study the specific binding structures of polyamidoamine (PAMAM) dendrimers on amphiphilic membranes and the permeation mechanisms. Mutually consistent coarse-grained (CG) models both for PAMAM dendrimers and for dimyristoylphosphatidylcholine (DMPC) lipid molecules are constructed. The PAMAM CG model describes correctly the conformational behavior of the dendrimers, and the DMPC CG model can properly give the surface tension of the amphiphilic membrane. A series of systematic simulations is performed to investigate the binding structures of the dendrimers on membranes with varied length of the hydrophobic tails of amphiphiles. The permeability of dendrimers across membranes is enhanced upon increasing the dendrimer size (generation). The length of the hydrophobic tails of amphiphiles in turn affects the dendrimer conformation, as well as the binding structure of the dendrimer-membrane complexes. The negative curvature of the membrane formed in the dendrimer-membrane complexes is related to dendrimer concentration. Higher dendrimer concentration together with increased dendrimer generation is observed to enhance the permeability of dendrimers across the amphiphilic membranes.