Origin of buckling phenomenon during drying of micrometer-sized colloidal droplets

The origin of the buckling of micrometer-sized colloidal droplets during evaporation-induced self-assembly (EISA) has been elucidated using electron microscopy and small-angle neutron scattering. Doughnut-like assembled grains with varying aspect ratios are formed during EISA at different physicochemical conditions. It has been revealed that this phenomenon is better explained by an existing hypothesis based on the formation of a viscoelastic shell of nanoparticles during drying than by other existing hypotheses based on the inertial instability of the initial droplets and hydrodynamic instability due to thermocapillary forces. This conclusion was further supported by the arrest of buckling through modification of the colloidal interaction in the initial dispersion.     

Submicrometer intermediates in the citrate synthesis of gold nanoparticles: new insights into the nucleation and crystal growth mechanisms

The reduction of tetrachloroaurate by citrate ions in aqueous solutions yielding gold nanoparticles (GNPs) has been studied using in situ tapping mode atomic force microscopy (AFM), UV-vis absorption and dynamic light scattering (DLS) spectroscopies, small-angle X-ray scattering (SAXS) along with ex situ TEM, EDX and XPS. Special attention is given to mesoscale intermediates responsible for the intense coloring of the transient solutions and their role in nucleation and crystal growth. AFM detects liquid droplet-like domains, globules 30-50 nm in diameter arranged in submicrometer aggregates in the gray and blue solutions, and well separated individual particles in the final red sols. DLS shows abrupt appearance of species about 30 nm and larger but not growing Au nanoparticles, while SAXS reveals gradually increasing nanoparticles and no aggregates. The mesoscale structures observed in TEM become looser as the reaction proceeds; they contain signatures of oxidized Au and other solutes. The results are interpreted in terms of decomposition of supersaturated solutions to afford domains ("dense droplets") enriched by gold, and then, after nucleation and coalescence of Au nuclei inside them, rather slow growth of gold nanoparticles within the associated globules; the color changes of the transient solutions are due to increasing interparticle distances.     

Silica nanoparticle crystals and ordered coatings using lys-sil and a novel coating device

Silica nanoparticles with a narrow particle size distribution and controlled diameters of 10-20 nm are synthesized via hydrolysis and hydrothermal aging of tetraethylorthosilicate in an aqueous L-lysine solution. Cryo-transmission electron microscopy (cryo-TEM) reveals that the silica nanoparticles assemble to form close-packed nanoparticle crystals over short length scales on carbon-coated grids. Evaporative drying of the same sols results in nanoparticle stability and remarkable long-range facile ordering of the silica nanoparticles over scales greater than 10 microm. Whereas small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) discount the possibility of a core (silica)-shell (lysine) structure, the possibility remains for lysine occlusion within the silica nanoparticles and concomitant hydrogen bonding effects driving self-assembly. Facile ordering of the silica nanoparticles into multilayer and monolayer coatings over square-centimeter areas by evaporation-induced self-assembly is demonstrated using a novel dip-coating device.     

Multiple small-angle X-ray scattering analyses of the structure of gold nanorods with unique end caps

Small-angle X-ray scattering (SAXS) experiments were carried out on gold nanorods generated by a seed-mediated growth method. Previous transmission electron microscopy observations suggest that the main components of nanoparticles are rod-shaped nanoparticles, but they are contaminated by other different-shaped, large-volume particles. By performing profile fitting of theoretical and experimental scattering curves, we determined and then removed from the obtained SAXS profile, the contribution of the contaminating particles. From the revised SAXS profile, we calculated the distance distribution function by Fourier transform and precisely determined the structural parameters of the nanorods and the structure of the nanorod end caps.     

Control of buckling in colloidal droplets during evaporation-induced assembly of nanoparticles

Micrometric grains of anisotropic morphology have been achieved by evaporation-induced self-assembly of silica nanoparticles. The roles of polymer concentration and its molecular weight in controlling the buckling behavior of drying droplets during assembly have been investigated. Buckled doughnut grains have been observed in the case of only silica colloid. Such buckling of the drying droplet could be arrested by attaching poly(ethylene glycol) on the silica surface. The nature of buckling in the case of only silica as well as modified silica colloids has been explained in terms of theory of homogeneous elastic shell under capillary pressure. However, it has been observed that colloids, modified by polymer with relatively large molecular weight, gives rise to buckyball-type grains at higher concentration and could not be explained by the above theory. It has been demonstrated that the shell formed during drying of colloidal droplet in the presence of polymer becomes inhomogeneous due to the presence of soft polymer rich zones on the shell that act as buckling centers, resulting in buckyball-type grains.     

Silver nanoparticle formation in microemulsions acting both as template and reducing agent

A novel method of making silver nanoparticles in water-in-oil microemulsions using the surfactants as both the reducing agent and as the structure-directing agent is presented. Since no external strong reducing agent is used the kinetics of the formation is slow, which makes it possible to study the silver nanoparticle formation in situ. The microemulsions used were based on either the nonionic surfactant Brij30 (C12E4), which reduces the silver ion to metallic silver and is thereby partly oxidized, or mixtures of Brij30 and AOT (sodium bis(2-ethylhexyl) sulfosuccinate, where the latter does not reduce the silver ions. The influences of silver ion and nonionic surfactant concentrations on the formation kinetics of the nanoparticles were followed in situ using UV-vis spectroscopy, and both parameters were found to have a big influence. The microemulsion droplet's size, size distribution, and shape were examined by small-angle X-ray scattering (SAXS), and the formed silver nanoparticles were studied using both transmission electron microscopy and SAXS. The SAXS measurements showed that the presence of silver nitrate does not affect the microemulsion systems noticeably and that the droplet's size and shape are retained during the particle formation. It is shown that the size and morphology of the particles do not directly follow the shape and size of the microemulsion droplets even though there is a relation between the droplet size and the radii of the formed particles.     

The size distribution of 'gold standard' nanoparticles

The spherical gold nanoparticle reference materials RM 8011, RM 8012, and RM 8013, with a nominal radius of 5, 15, and 30 nm, respectively, have been available since 2008 from NIST. These materials are recommended as standards for nanoparticle size measurements and for the study of the biological effects of nanoparticles, e.g., in pre-clinical biomedical research. We report on determination of the size distributions of these gold nanoparticles using different small-angle X-ray scattering (SAXS) instruments. Measurements with a classical Kratky type SAXS instrument are compared with a synchrotron SAXS technique. Samples were investigated in situ, positioned in capillaries and in levitated droplets. The number-weighted size distributions were determined applying model scattering functions based on (a) Gaussian, (b) log-normal, and (c) Schulz distributions. The mean radii are 4.36 ± 0.04 nm (RM 8011), 12.20 ± 0.03 nm (RM 8012), and 25.74 ± 0.27 nm (RM 8013). Low polydispersities, defined as relative width of the distributions, were detected with values of 0.067 ± 0.006 (RM 8011), 0.103 ± 0.003, (RM 8012), and 0.10 ± 0.01 (RM 8013). The results are in agreement with integral values determined from classical evaluation procedures, such as the radius of gyration (Guinier) and particle volume (Kratky). No indications of particle aggregation and particle interactions—repulsive or attractive—were found. We recommend SAXS as a standard method for a fast and precise determination of size distributions of nanoparticles.      

Modelling of synchrotron SAXS patterns of silicalite-1 zeolite during crystallization

Synchrotron small angle X-ray scattering (SAXS) was used to characterize silicalite-1 zeolite crystallization from TEOS/TPAOH/water clear sol. SAXS patterns were recorded over a broad range of length scales, enabling the simultaneous monitoring of nanoparticles and crystals occurring at various stages of the synthesis. A simple two-population model accurately described the patterns. Nanoparticles were modeled by polydisperse core-shell spheres and crystals by monodisperse oblate ellipsoids. These models were consistent with TEM images. The SAXS results, in conjunction with in situ light scattering, showed that nucleation of crystals occurred in a short period of time. Crystals were uniform in size and shape and became increasingly anisotropic during growth. In the presence of nanoparticles, crystal growth was fast. During crystal growth, the number of nanoparticles decreased gradually but their size was constant. These observations suggested that the nanoparticles were growth units in an aggregative crystal growth mechanism. Crystals grown in the presence of nanoparticles developed a faceted habit and intergrowths. In the final stages of growth, nanoparticles were depleted. Concurrently, the crystal growth rate decreased significantly.     

Length scale of polyisopirene and dynamic light scattering and structure of sodium-2-diethylhexyl sulfosuccinate/water/decane

The mixture of polyisopirene (PI) and sodium-2-diethylhexyl sulfosuccinate /decane/water microemulsion (ME) at AOT to water molar ratio (X = 30) and droplet mass fraction (m_f,drop = 0.08) was studied with dynamic light scattering and small-angle X-ray scattering (SAXS). The light scattering was used to obtain the diffusion coefficient of Brownian motion of the nano-droplets at different polymer concentrations and molecular weights (1000 and 4700) in the ME. The dynamics of the nano-droplets decreased with the increase of molecular weight (from 1000 to 4700) and concentration (from 0.01 to 0.09) of PI. The study of the structure by SAXS showed that with increase of PI (MW = 1000) mass fraction from 0.01 to 0.09 at ME, the size of the droplets changes from 4.5 to 4.3 nm and with increase of PI (MW = 4700) concentration at ME, the size of droplets changes from 4.8 to 4.4 nm. The size ratio of droplets to polymer decreased with increase of concentration and molecular weight of polymer and also the interaction between the droplets increased with increase of polymer concentration.     

Fractionated crystallization of α‐ and β‐nucleated polypropylene droplets

A layer multiplying coextrusion process was used to produce multilayered polypropylene/polystyrene (PP/PS) films with various nucleating agents. When heated into the melt, the thin PP layers broke up into submicron PP droplets that exhibited fractionated crystallization. If the initial PP layers were 20 nm or less, the resulting droplets exhibited exclusively homogeneous nucleation. If a nucleating agent was added, the systematic departure from homogeneous nucleation provided insight into the nature of the heterogeneous nucleation. In this study, we used thermal analysis, atomic force microscopy (AFM), and wide angle X‐Ray scattering (WAXS) to examine the effect of two nucleating agents. We confirmed with WAXS and AFM that a soluble sorbitol nucleating agent for the PP α‐form operates in three concentration regimes as proposed in a previous study. Morphologically, homogeneous nucleation of the submicron droplets produced a granular texture. The correlation length from small‐angle X‐Ray scattering (SAXS) suggested that the grains contained 1–3 mesophase domains. Drawing on classical nucleation theory, the critical size nucleus of an individual mesophase domain was estimated to be about 2 nm³, which was considerably smaller than the mesophase domain. This pointed to mesophase crystallization that included the processes of nucleation and growth. Additional experiments were performed with nucleating agents for the PP β‐form. However, they were not effective in nucleating crystallization of the droplets, presumably because they were essentially insoluble in PP and the nucleating particles were too large to be accommodated in the PP droplets. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Drying dip-coated colloidal films

We present the results from a small-angle X-ray scattering (SAXS) study of lateral drying in thin films. The films, initially 10 μm thick, are cast by dip-coating a mica sheet in an aqueous silica dispersion (particle radius 8 nm, volume fraction ?(s) = 0.14). During evaporation, a drying front sweeps across the film. An X-ray beam is focused on a selected spot of the film, and SAXS patterns are recorded at regular time intervals. As the film evaporates, SAXS spectra measure the ordering of particles, their volume fraction, the film thickness, and the water content, and a video camera images the solid regions of the film, recognized through their scattering of light. We find that the colloidal dispersion is first concentrated to ?(s) = 0.3, where the silica particles begin to jam under the effect of their repulsive interactions. Then the particles aggregate until they form a cohesive wet solid at ?(s) = 0.68 ± 0.02. Further evaporation from the wet solid leads to evacuation of water from pores of the film but leaves a residual water fraction ?(w) = 0.16. The whole drying process is completed within 3 min. An important finding is that, in any spot (away from boundaries), the number of particles is conserved throughout this drying process, leading to the formation of a homogeneous deposit. This implies that no flow of particles occurs in our films during drying, a behavior distinct to that encountered in the iconic coffee-stain drying. It is argued that this type of evolution is associated with the formation of a transition region that propagates ahead of the drying front. In this region the gradient of osmotic pressure balances the drag force exerted on the particles by capillary flow toward the liquid-solid front.     

Size of elementary clusters and process period in silver nanoparticle formation

The time dependence of small-angle X-ray scattering (SAXS) curves for silver nanoparticle formation was followed in situ at a time resolution of 0.18 ms, which is 3 orders of magnitude higher than that used in previous reports (ca. 100 ms). The starting materials were silver nitrate solutions that were reacted with reducing solutions containing trisodium citrate. The SAXS analyses showed that silver nanoparticles were formed in three distinct periods from a peak diameter of ca. 0.7 nm (corresponding to the size of a Ag(13) cluster) during the nucleation and the early growth period. The Ag(13) clusters are most likely elementary clusters that agglomerate to form silver nanoparticles.     

Drying Study of Siloxane-PPG Nanocomposites

This is a study of the structural transformations occurring in hybrid siloxane-polypropyleneglycol (PPG) nanocomposites, with different PPG molecular weight, along the drying process. The starting materials are wet gels obtained by the sol-gel procedure using as precursor the 3-(trietoxysilyl)propylisocyanate (IsoTrEOS) and polypropylenglycol bis(2-amino-propyl-ether) (NH₂-PPG-NH₂). The shrinkage and mass loss measurements were performed using a temperature-controlled chamber at 50°C. The nanostructural evolution of samples during drying was studied in situ by small angle x-ray scattering (SAXS). The experimental results demonstrate that the drying process is highly dependent on the molecular weight of polymer. After the initial drying stage, the progressive emptying of pores leads to the formation of a irregular drying front in gels prepared from PPG of high molecular weight, like 4000 g/mol. As a consequence, an increase of the SAXS intensity due to the increase of electronic density contrast between siloxane clusters and polymeric matrix is observed. For hybrids containing PPG of low molecular weight, the pore emptying process is fast, leading to a regular drying front, without isolated nanopockets of solvents. SAXS intensity curves exhibit a maximum, which was associated to the existence of spatial correlation of the silica clusters embedded in the polymeric matrix. The spatial correlation is preserved during drying. These results also reveal that the structural transformation during drying is governed by capillary forces and depends on the entanglement of polymer chains.     

Synthesis and characterization of nanogels of poly(N-isopropylacrylamide) by a combination of light and small-angle X-ray scattering

Thermo-responsive crosslinked nanogels of N-isopropylacrylamide (NIPAM) were synthesized by emulsion polymerization and the size was varied using different concentrations of surfactant (sodium dodecyl sulfate, SDS) in the polymerization process. The collapse behavior of the nanogels at the lower critical solution temperature at around 32 °C was investigated by dynamic light scattering, and by combined static light scattering (SLS) and small-angle X-ray scattering (SAXS). The combined data from SLS and SAXS were analyzed by a model for the nanogels which at intermediate temperatures included a central core and a more diffuse outer layer describing pending polymer chains with a low degree of cross linking. In the expanded state, the particles were modeled with a single component with a broad graded surface. In the collapsed state the nanogels were modeled as homogeneous and relatively compact particles. The amount of surfactant used had a profound effect on the final size of the nanogels owing to the phenomenon of colloidal stabilization of the emulsion droplets during polymerization. The combination of SLS and SAXS as applied to the nanogels is an attractive method for particle characterization as it spans a very large range of scattering vector from q = 0.0004 to 0.22 ?(-1).     

Small angle X-ray scattering measurements probe water nanodroplet evolution under highly non-equilibrium conditions

Our in situ small angle X-ray scattering (SAXS) measurements yield an unprecedented and detailed view of rapidly evolving H(2)O nanodroplets formed in supersonic nozzles. The SAXS experiments produce spectra in a few seconds that are comparable to small angle neutron scattering (SANS) spectra requiring several hours of integration time and the use of deuterated compounds. These measurements now make it possible to quantitatively determine the maximum nucleation and growth rates of small droplets formed under conditions that are far from equilibrium. Particle growth is directly followed from about 10 micros to 100 micros after particle formation with growth rates of approximately 0.2 to 0.02 nm micros(-1). The peak H(2)O nucleation rates lie between 10(17) and 10(18) cm(-3) s(-1).     

Preparation and characterization of core-shell nanoparticles hardened by gamma-ray

Core-shell nanoparticles have been prepared by irradiation of gamma-ray on block copolymer micelles consisting of hydrophilic polyacrylic acid and hydrophobic polyisoprene with each 40 monomer units. The structure was determined by means of dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and atomic force microscopy (AFM). The size distribution of the core-shell nanoparticles determined by DLS and AFM was very narrow. The average diameter of the particles decreased from 48 nm for the original micelles to 26 nm by the irradiation of 30 kGy. The core size determined by SAXS combined with DLS was roughly constant of 10 nm, irrespective of irradiation dose, whereas the shell thickness of the micelles was twice as large as the core size, and decreased with increasing irradiation dose.     

Evolution of self-assembled silica-tetrapropylammonium nanoparticles at elevated temperatures

The time evolution of silica nanoparticles in solutions of tetrapropylammonium (TPA) has been studied using a combination of small-angle scattering, conductivity, and pH measurements to provide the first comprehensive analysis of nanoparticle structural and compositional changes at elevated temperatures. We have found that silica-TPA nanoparticles subjected to hydrothermal treatment (70-90 degrees C) grow via an Ostwald ripening mechanism with growth rates that depend on both pH and temperature. Small-angle X-ray (SAXS) and neutron (SANS) scattering confirm that the core-shell structure of the particles, initially present at room temperature, is maintained during heating, but an evolution toward sphericity is evidenced especially at high values of pH. SAXS absolute intensity calculations were utilized to calculate the changes in nanoparticle composition and concentration over time. These changes along with the conductivity and pH measurements and SANS contrast matching studies indicate that, upon heating, TPA becomes embedded in the core of nanoparticles giving rise to more zeolitic-looking nanomaterials.     

Formation of silica nanoparticles in microemulsions

Silica nanoparticles for controlled release applications have been produced by the reaction of tetramethylorthosilicate (TMOS) inside the water droplets of a water-in-oil microemulsion, under both acidic (pH 1.05) and basic (pH 10.85) conditions. In-situ FTIR measurements show that the addition of TMOS to the microemulsion results in the formation of silica as TMOS, preferentially located in the oil phase, diffuses into the water droplets. Once in the hydrophilic domain, hydrolysis occurs rapidly as a result of the high local concentration of water. Varying the pH of the water droplets from 1.05 to 10.85, however, considerably slows the hydrolysis reaction of TMOS. The formation of a dense silica network occurs rapidly under basic conditions, with IR indicating the slower formation of more disordered silica in acid. SAXS analysis of the evolving particles shows that approximately 11 nm spheres are formed under basic conditions; these are stabilized by a water/surfactant layer on the particle surface during formation. Under acidic conditions, highly uniform approximately 5 nm spheres are formed, which appear to be retained within the water droplets (approximately 6 nm diameter) and form an ordered micelle nanoparticle structure that exhibits sufficient longer-range order to generate a peak in the scattering at q approximately equal to 0.05 A-1. Nitrogen adsorption analysis reveals that high surface area (510 m2/g) particles with an average pore size of 1 nm are formed at pH 1.05. In contrast, base synthesis results in low surface area particles with negligible internal porosity.     

emim][etSO4] as the polar phase in low-temperature-stable microemulsions

We demonstrate here that microemulsions with an IL as the continuous phase can be formed so that they are stable over a wide temperature range and have intermediary properties between flexible and stiff microemulsions. Three components (1-ethyl-3-methylimidazolium ethylsulfate ([emim][etSO(4)]), limonene, and octylphenol ethoxylate (Triton X 100, abbreviated as TX-100)) were used. This ternary system has been characterized from ambient temperature down to -10 °C by means of conductivity, viscosity, and small-angle X-ray scattering (SAXS) measurements. The SAXS data exhibit a characteristic single, broad scattering peak in conjunction with a typical q(-4) decay at large q values. The SAXS data have also been interpreted in terms of a dimensionless dilution plot, demonstrating that microstructures are neither isolated droplets nor a random flexible film structure but resemble molten liquid crystals (i.e., they are formed from locally cylindrical or planar structures). This semirigidity is attributed to a good match between the surfactant and the ionic liquid; this holds in a temperature range well below 0 °C.     

Time-resolved in situ small-angle X-ray scattering study of silica particle formation in nonionic water-in-oil microemulsions

The formation of silica particles by the ammonia-catalyzed hydrolysis of tetraethyl orthosilicate (TEOS) in the polyoxyethylene (5) nonylphenyl ether (NP-5)/cyclohexane/water microemulsion system was investigated by time-resolved small-angle X-ray scattering (SAXS). The SAXS data could be modeled as a combination of two species where one describes the silica-particle containing microemulsion droplets and the other the reverse droplets. The analysis allowed the determination of the evolution of the system of particles of silica and reverse droplets. A model of nucleation and growth of the silica particles is confirmed and the volume fraction versus time data for the silica particles is in agreement with first order kinetics with respect to TEOS concentration. Moreover to describe the long time evolution of the system, a correlation among the silica particles has been taken into account by introducing a structure factor with a local silica volume fraction eta = 0.1. This high local density is 2 orders of magnitude larger than the global silica fraction and can be explained in terms of depleting interaction.