The standard enthalpy of formation of silver pivalate

The standard enthalpy of combustion of crystalline silver pivalate, (CH₃)₃CC(O)OAg (AgPiv), was determined in an isoperibolic calorimeter with a self-sealing steel bomb, Δ_c H ⁰ (AgPiv, cr)= −2786.9±5.6 kJ mol⁻¹. The value of standard enthalpy of formation was derived for crystalline state: Δ_f H ⁰(AgPiv,cr)= −466.9±5.6 kJ mol⁻¹. Using the enthalpy of sublimation, measured earlier, the enthalpy of formation of gaseous dimer was obtained: Δ_f H ⁰(Ag₂Piv₂,g)= −787±14 kJ mol⁻¹. The enthalpy of reaction (CH₃)₃CC(O)OAg(cr)=Ag(cr)+(CH₃)₃CC(O)O^.(g) was estimated, Δ_r H ⁰=202 kJ mol⁻¹.     

Prediction of hydrocarbon enthalpies of formation by various thermochemical schemes

The correlation consistent composite approach (ccCA) has been used to compute the enthalpies of formation (ΔH_f′s) for 60 closed‐shell, neutral hydrocarbon molecules selected from an established set (Cioslowski et al., J. Chem. Phys. 2000 , 113, 9377). This set of thermodynamic values includes ΔH_f's for hydrocarbons that span a range of molecular sizes, degrees of aromaticity, and geometrical configurations, and, as such, provides a rigorous assessment of ccCA's applicability to a variety of hydrocarbons. The ΔH_f's were calculated via atomization energies, isodesmic reactions, and hypohomodesmotic reactions. In addition, for 12 of the aromatic molecules in the set that are larger than benzene, the energies of ring‐conserved isodesmic reactions were used to calculate the ΔH_f′s. Using an atomization energy approach to determine the ΔH_f′s, the lowest mean absolute deviation (MAD) from experiment achieved by ccCA for the 60 hydrocarbons was 1.10 kcal mol^?1. The use of the mixed Gaussian/inverse exponential complete basis set extrapolation scheme (ccCA‐P) in conjunction with hypohomodesmotic reaction energies resulted in a MAD of 0.87 kcal mol^?1. This value is compared with MADs of 1.17, 1.18, and 1.28 kcal mol^?1 obtained via the Gaussian‐4 (G4), Gaussian‐3 (G3), and Gaussian‐3(MP2) [G3(MP2)] methods, respectively (using the hypohomodesmotic reactions). © 2012 Wiley Periodicals, Inc.     

The enthalpies of formation and evolved gas detection

The standard molar enthalpies of formation of H₄SiW₁₂O₄₀·6H₂O (I), H₄SiW₁₂O₄₀·6DMF·H₂O (II), H₄SiW₁₂O₄₀·8DMSO·H₂O (III) have been determined. Thermodynamic cycles were designed, and the heat of reactions in the thermodynamic cycles were measured calorimetrically. The infrared spectra were compared with those of the heteropoly anion α-H₄SiW₁₂O₄₀ [1] and of the ligands DMF and DMSO. The evolved gas from the adducts was monitored by a quadrupole mass spectrometer at a heating rate of 16 deg·min^?1.     

Determination of combustion energies and the standard enthalpies of formation for the complexes of RE(Et_2dtc)_3(phen)

Solid complexes, RE(Et2dtc)3(phen) (RE=La, Pr, Nd, Sm-Lu), were synthesized with sodium diethyldithiocarbamate (NaEt2dtc3H2O),1,10-phenanthroline (o-phen·H2O) and hydrated lanthanide chlorides in absolute ethanol. The constant-volume combustion energies of complexes,ΔcU, were determined by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpies of combustion,ΔcHmθ, and standard enthalpies of formation,ΔfHmθ, were calculated for these complexes, respectively. The experiment results showed the "tripartite effect" of rare earth.     

Calculations of enthalpies of formation of carbenes in the ground state in the gas phase

Known enthalpies of formation (Δ_f H ^o) of carbenes in the ground state in the gas phase were analyzed; the prospects for the theoretical evaluation of (Δ_f H ^o) were considered. The (Δ_f H ^o) values of carbenes were calculated by the group-addition method, developed previously for free radicals, as well as by the AM1 and PM3 quantum-chemical methods; these methods were compared. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 57–63, January, 1997.     

Thermodynamic and ab initio analysis of the controversial enthalpy of formation of formaldehyde.

There are two values, -26.0 and -27.7 kcal mol(-1), that are routinely reported in literature evaluations for the standard enthalpy of formation, Delta(f) H(o)(298), of formaldehyde (CH(2)=O), where error limits are less than the difference in values. In this study, we summarize the reported literature for formaldehyde enthalpy values based on evaluated measurements and on computational studies. Using experimental reaction enthalpies for a series of reactions involving formaldehyde, in conjunction with known enthalpies of formation, its enthalpy is determined to be -26.05+/-0.42 kcal mol(-1), which we believe is the most accurate enthalpy currently available. For the same reaction series, the reaction enthalpies are evaluated using six computational methods: CBS-Q, CBS-Q//B3, CBS-APNO, G2, G3, and G3B3 yield Delta(f) H(o)(298)=-25.90+/-1.17 kcal mol(-1), which is in good agreement to our experimentally derived result. Furthermore, the computational chemistry methods G3, G3MP2B3, CCSD/6-311+G(2df,p)//B3LYP/6-31G(d), CCSD(T)/6-311+G(2df,p)//B3LYP/6-31G(d), and CBS-APNO in conjunction with isodesmic and homodesmic reactions are used to determine Delta(f) H(o)(298). Results from a series of five work reactions at the higher levels of calculation are -26.30+/-0.39 kcal mol(-1) with G3, -26.45+/-0.38 kcal mol(-1) with G3MP2B3, -26.09+/-0.37 kcal mol(-1) with CBS-APNO, -26.19+/-0.48 kcal mol(-1) with CCSD, and -26.16+/-0.58 kcal mol(-1) with CCSD(T). Results from heat of atomization calculations using seven accurate ab initio methods yields an enthalpy value of -26.82+/-0.99 kcal mol(-1). The results using isodesmic reactions are found to give enthalpies more accurate than both other computational approaches and are of similar accuracy to atomization enthalpy calculations derived from computationally intensive W1 and CBS-APNO methods. Overall, our most accurate calculations provide an enthalpy of formation in the range of -26.2 to -26.7 kcal mol(-1), which is within computational error of the suggested experimental value. The relative merits of each of the three computational methods are discussed and depend upon the accuracy of experimental enthalpies of formation required in the calculations and the importance of systematic computational errors in the work reaction. Our results also calculate Delta(f) H(o)(298) for the formyl anion (HCO(-)) as 1.28+/-0.43 kcal mol(-1).     

用原子序数连接性指数研究烷基衍生物的标准生成焓

通过对杂原子染色给出每个非氢原子的序数（fi)，它对分子中非氢原子实现 唯一性表征。基于邻接矩阵和fi建立析的连接性指数（^mF），其中^1F对烷烃的其 衍生物具有良好的结构选择性，拟合42种烷基衍生物的标准生成焓（△fHm^θ)与 ^1F的直线与曲线方程为：-△fHm^θ=-131.98+101.76^1F,r=0.9884,-△fHm^θ=- 24.55+27.34^1F^1.75,r=0.9956。相关性明显优于文献报道的研究结果（其r为0. 2930)。     

Accurate prediction of the enthalpies of formation for xanthophylls

This study investigates the applications of computational approaches in the prediction of enthalpies of formation (ΔH(f)) for C-, H-, and O-containing compounds. Molecular mechanics (MM4) molecular mechanics method, density functional theory (DFT) combined with the atomic equivalent (AE) and group equivalent (GE) schemes, and DFT-based correlation corrected atomization (CCAZ) were used. We emphasized on the application to xanthophylls, C-, H-, and O-containing carotenoids which consist of ～ 100 atoms and extended π-delocaization systems. Within the training set, MM4 predictions are more accurate than those obtained using AE and GE; however a systematic underestimation was observed in the extended systems. ΔH(f) for the training set molecules predicted by CCAZ combined with DFT are in very good agreement with the G3 results. The average absolute deviations (AADs) of CCAZ combined with B3LYP and MPWB1K are 0.38 and 0.53 kcal/mol compared with the G3 data, and are 0.74 and 0.69 kcal/mol compared with the available experimental data, respectively. Consistency of the CCAZ approach for the selected xanthophylls is revealed by the AAD of 2.68 kcal/mol between B3LYP-CCAZ and MPWB1K-CCAZ.     

量子化学的Gaussian－2理论及其应用与化合物的标准生成焓预测

本文较为全面地综述了Ｇａｕｓｓｉａｎ－１，Ｇａｕｓｓｉａｎ－２（简称Ｇ１，Ｇ２）理论以及简化的Ｇ２（ＭＰ２），Ｇ２（ＭＰ３）理论，将其主要结果进行了比较分析。关于Ｇ２理论的应用，除了较为详细地综述了几年来理论在重现实验数据、评价实验数据、预测实验数据及研究化学反应途径等方面的应用外，还结合我们近期研究结果的主要结论讨论了该理论在研究等电子－等自旋，价层等电－等旋，等旋及非等旋化学反应的能量计算中的应用情况，以及该理论在预测化合物的标准生成焓方面的应用情况。     

The enthalpies of mixing of organophosphate esters with hydrocarbons

Heats of mixing were obtained calorimetrically at 298°K for each of the phosphate esters tri-n-butylphosphate (TBP), bis(2-ethylhexyl)phosphate [(H)DE-HP], and di-n-butylphosphate [(H)DBP] withn-dodecane and with 1,3-diethylbenzene. These data and data from the literature on Gibbs free energies and heats of mixing of the phosphate esters with decane, hexane, and benzene are interpreted according to a nonideal associated mixture model. This takes into account the size effect, nonspecific (regular-type) interactions, and association to dimers, which is partial for TBP and complete for the acidic esters, which in turn associate further to trimers and possibly higher oligomers. The enthalpies of mixing with the aliphatic hydrocarbons involve two parameters, one describing the association and the other the nonspecific interaction, and independently obtained quantities. The enthalpies of mixing with the aromatic hydrocarbons require further parameters, involving the mutual interactions, which could not be calculated.     

Thermochemistry of heteroatomic compounds 22. Enthalpies of combustion and formation of alkyl(aryl)arsines and arsenites in the condensed and gaseous phases

The enthalpies of combustion (ΔH _comb) of five primary, secondary, and tertiary alkyl(aryl)arsines in the condensed state were calculated using the equation ΔH _comb = −385.8–110.3N, where N is the number of bond-forming electrons. The dependence presented is used for the calculation of the enthalpies of combustion of full esters and amidoesters of arsinous acid of noncyclic and cyclic structures. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1042–1043, May, 2007.     

Structure analysis and the standard molar enthalpy of formation of a coordination polymer [Co(TO)2Cl2]n (TO = 1,2,4-triazole-5-one)

A coordination polymer was synthesized by the reaction of CoCl₂ with 1,2,4-triazole-5-one (TO) and charaterized by means of IR and TG–DTG. Single-crystal structure analysis showed that the complex crystallized in the monoclinic space group C2/c: a = 23.105(9) Å, b = 3.5683(2) Å, c = 13.589(6) Å,  = 90°, β = 124.038(4)°, γ = 90°, V = 928.4(7) Å³, Z = 4. The standard molar enthalpy of formation of the complex was determined to be (−1034.28 ± 0.95) kJ mol⁻¹.     

高氯酸钆与脯氨酸形成配合物的反应热化学研究

稀土氨基酸配合物具有许多特殊的性能,1975年Anghileri等报到了氯化镧与甘氨酸的配合物具有抗肿瘤作用^[1],此后人们又陆续发现这类配合物在医药,防腐剂,动物饲料,农用微肥,钙离子探针,羊毛染色等方面具有广泛的实用价值[2,3],因而引起人们对研究稀土氨基酸配合物的兴趣。但目前这类配合物的制备和性质报道较多^[4,5],基础热化学的研究尚待展开^[6]。     

Standard enthalpies of formation of 2-aminobenzothiazoles in the crystalline phase by rotating-bomb combustion calorimetry

The standard molar enthalpies of combustion of 2-aminobenzothiazole (2AB), 2-amino-4-methyl-benzothiazole (2A4MB), and 2-amino-6-methyl-benzothiazole (2A6MB) were determined in the crystalline phase at T = 298.15 K using a rotating-bomb combustion calorimeter. The molar energies of combustion of these compounds were found to be: (−4273.6 ± 0.9), (−4896.9 ± 1.1), and (−4906.9 ± 1.2) kJ · mol⁻¹, respectively. From these values, the corresponding standard molar enthalpies of formation in the solid phase were obtained as: (59.55 ± 1.28), (2.71 ± 1.50), and (13.53 ± 1.53) kJ · mol⁻¹, respectively. The enthalpies of formation in the gas phase were determined using the experimental enthalpies of formation in the solid phase and predicted values of the enthalpies of sublimation. Additionally, the enthalpies of formation in the gas phase were calculated by means of the Gausian-4 theory, using several gas-phase working reactions, and were compared with those found using the predicted enthalpies of sublimation.     

Low-temperature heat capacity and standard molar enthalpy of formation of the complex Zn(Thr)SO4·H2O (s)

Low-temperature heat capacities of the complex Zn(Thr)SO₄·H₂O (s) have been precisely measured with a small sample adiabatic calorimeter over the temperature range from 78 to 373 K. The initial dehydration temperature of the complex (T_d=325.50 K) has been obtained by analysis of the heat-capacity curve. The experimental values of molar heat capacities have been fitted to a polynomial equation by least square method. The standard molar enthalpy of formation of the complex has been determined from the enthalpies of dissolution (Δ_dH_m^Θ) of [ZnSO₄·7H₂O (s) +Thr (s)] and Zn(Thr)SO₄·H₂O (s) in 100 ml of 2 mol dm⁻³ HCl solvent as: Δ_fH_{m,Zn(Thr)SO4·H2O}^Θ=−2111.7±3.4 kJ mol⁻¹. These experiments were made by using an isoperibol solution calorimeter at 298.15 K.     

Determination of selected chlorohydrocarbons and polyaromatic hydrocarbons by gas chromatography-mass spectrometry in soils in Southwest Louisiana

The use of gas chromatography-mass spectrometry for the determination of selected polyaromatic hydrocarbons (PAHs) (anthracene and pyrene) and chlorohydrocarbons (hexachlorobutadiene and 1, 2, 4-trichlorobenzene) in soils from five areas in Southwest Louisiana was investigated. No detectable concentrations (below the detection limits) were found on or near the surface. However, trace levels of the PAHs were found at a depth in the 2 to 3 ft range below the surface levels.     

Crystal Structure, Lattice Energy, and Standard Molar Enthalpy of Formation of the Complex (C11H18NO)2CuCl4(s)

The complex (C₁₁H₁₈NO)₂CuCl₄ (s), which may be a potential effective drug, was synthesized. X‐ray crystallography, elemental analysis, and chemical analysis were used to characterize the structure and composition of the complex. Lattice energy and ionic radius of the anion of the complex were derived from the crystal data of the title compound. In addition, a reasonable thermochemical cycle was designed, and standard molar enthalpies of dissolution for reactants and products of the synthesis reaction of the complex were measured by an isoperibol solution‐reaction calorimeter. The enthalpy change of the reaction was calculated to be Δ_rH^?_m=(2.69±0.02) kJ·mol^?1 from the data of the above standard molar enthalpies of dissolution. Finally, the standard molar enthalpy of formation of the title compound was determined to be Δ_rH^?_m[(C₁₁ H₁₈NO)₂CuCl₄, s]= ? (1822.96±6.80) kJ·mol^?1 in accordance with Hess law.     

Experimental and quantum-chemical study of complexation of carbene analogs with dinitrogen. Direct IR-spectroscopic observation of Cl2Si·N2 complexes in low-temperature argon-nitrogen matrices

Interaction of dichlorosilylene with dinitrogen in mixed Ar—N₂ matrices at 9 - 10 K was studied by IR spectroscopy. A donor-acceptor complex Cl₂Si·N₂ was found and characterized by six bands of symmetric (at 511.2, 508.9, and 506.5 cm^–1) and antisymmetric (at 500.1, 496.9, and 495.1 cm^–1) stretching vibrations of Si—Cl bonds in the most abundant isotopomers. Two bands at 498.7 and 493.5 cm^–1 observed in mixed matrices were tentatively assigned to Cl₂Si·(N₂)₂ complex. Several stretching vibration bands of minor isotopomers of SiCl₂ were detected for the first time in argon matrices. Assignment has been done for the isotopic structure of SiCl₂ associates with dinitrogen observed in N₂ matrices. Dimerization of SiCl₂ and its complexation with one and two N₂ molecules were studied by quantum-chemical DFT calculations (PBE and B3LYP functionals). The structures, energies, and vibrational frequencies of the Cl₂Si·N₂ and Cl₂Si·(N₂)₂ complexes and the Si₂Cl₄ dimer were determined. The energies of SiCl₂ complexation with one and two N₂ molecules obtained from PBE and B3LYP calculations are 0.3 and 0.6 kcal mol^–1, respectively. More accurate G2(MP2,SVP) calculations using the B3LYP geometries have predicted a higher stability of the Cl₂Si·N₂ complex (1.2 kcal mol^–1). The calculated and experimental vibrational frequencies of reagents and complexes are in good agreement. A correlation has been established between the PBE calculated energies of complexation of EHal₂ (E = Si, Ge, Sn, Pb) with N₂ and the experimentally observed shifts of E—Hal stretching vibrations in EHal₂ upon complexation. The strength of the complexes with N₂ increases on going from dihalosilylenes to dihaloplumbylenes.