首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
The mechanical and thermal characteristics of the self-similar boundary-layer flows induced by continuous surfaces stretched with rapidly decreasing power-law velocities U wx m , m<?1 are considered. Comparing to the well studied cases of the increasing stretching velocities (m>0) several new features of basic significance have been found. Thus: (i) for m<?1 the boundary layer equations admit self-similar solutions only if a lateral suction is applied; (ii) the dimensionless suction velocity f w<0 must be strong enough, i.e. f w<f w,max(m) where f w,max(m) depends on m so that its absolute maximum max (f w,max(m))=?2.279 is reached for m→?∞, while for m→?1, f w,max(m)→?∞; (iii) the case {m→?∞, f w,max(m)=?2.279} of the flow boundary value problem is isomorphic to the stretching problems with exponentially decreasing velocities U w∝e ax with arbitrary a<0; (iv) for any fixed m<?1 and f w<f w,max(m) the flow problem admits a non-denumerable infinity of multiple solutions corresponding to the values of the dimensionless skin friction f (0)≡s belonging to a finite interval s∈ [s min(f w,m), s max(f w,m)]; (v) the solution is only unique for f w=f w,max(m) where s=s min(f w,m)= s max(f w,m) holds; (vi) to every one of the multiple solutions of the flow problem there corresponds a unique solution of the heat transfer problem with a wall temperature distribution T w?T x n and a well defined and distinct value of the dimensionless wall temperature gradient ?(0), except for the cases n=(|m|?1)/2 where ?(0) has the same value ?(0)=Pr·f w for the whole class of flow solutions with s∈[s min(f w,m), s max(f w,m)]; (vii) for f w→?∞ one obtains the `asymptotic suction profiles' corresponding to s=s min(f w,m)?f w and ?(0)?Pr·f w in an explicit analytic form. The paper includes several examples which illustrate the dependence of the heat and fluid flows induced by surfaces stretching with rapidly decreasing velocities on the physical parameters f w, m, n and Pr.  相似文献   

2.
Heat and mass transfer characteristics of the self-similar boundary layer flows induced by continuous surfaces stretched with rapidly decreasing power law velocities Uw xm, m < –1 are considered for mixed convection flow. The effect of various governing parameters, such as Prandtl number Pr, temperature exponent n, dimensionless injection/suction velocity fw, and the mixed convection parameter = s Gr/Re2 are studied. These parameters have great effects on velocity and temperature profiles, heat transfer coefficient, and skin friction coefficient at the moving surface. Results show that similarity solutions exist only when the condition n = 2m – 1 is satisfied. Critical values of , Nu/Re0.5 and Cf Re0.5 are obtained for predominate natural convection for different Prandtl numbers at m = –2, –6 and n = –5, and –13 respectively. Results also show that the effect of buoyancy is more significant for weak than for strong suction. Furthermore, critical Prandtl numbers where fw profiles have minimums are obtained for m = –2 and –6. Finally, critical values of , Cf Re0.5 are also obtained for predominate natural convection for both m = –2 and –6.  相似文献   

3.
The steady mixed convection boundary layer flow over a horizontal circular cylinder, generated by Newtonian heating in which the heat transfer from the surface is proportional to the local surface temperature, is considered in this study. The governing boundary layer equations are first transformed into a system of non-dimensional equations via the non-dimensional variables, and then into non-similar equations before they are solved numerically using a numerical scheme known as the Keller-box method. Numerical solutions are obtained for the skin friction coefficient Re 1/2 C f and the local wall temperature θ w (x) as well as the velocity and temperature profiles with two parameters, namely the mixed convection parameter λ and the Prandtl number Pr.  相似文献   

4.
A continuous surface stretched with velocity u w=u w (x) and having the temperature distribution T w=T w (x) interacts with the viscous fluid in which it is immersed both mechanically and thermally. The thermal interaction is characterized by the surface heat flux q w=q w (x) and the mechanical one by the skin friction τ ww (x). In the whole previous theoretical research concerned with such processes, either (u w and T w) or (u w and q w) have been prescribed as known boundary conditions. The goal of the present paper is to initiate the investigation of the boundary layer flows induced by stretching processes for which either (τ w and T w ) or (τ w and q w) are the prescribed quantities. The case of an isothermal surface stretched with constant skin friction, (τ w=const., T w=const. ≠ T ) is worked out in detail. The corresponding flow and heat transfer characteristics are compared to those obtained for the (well known) case of a uniformly moving isothermal surface (u w=const., T w=const. ≠ T ).  相似文献   

5.
In the present paper the steady boundary-layer flows induced by permeable stretching surfaces with variable temperature distribution are investigated under the aspect of Reynolds' analogy r = St x /C f(x). It is shown that for certain stretching velocities and wall temperature distributions, “Reynolds' function”r, i.e. the ratio of the local Stanton number St x and the skin friction coefficient C f(x) equals −1/2 for any value of the Prandtl number Pr and of the dimensionless suction/injection velocity f w. In all of these cases, the dimensionless temperature field ϑ is connected to the dimensionless downstream velocity f by the simple relationship ϑ=(f )Pr. It is also shown that in the general case, Reynolds' function r may possess several singularities in f w. The largest of them represents a critical value, so that for f w<f w,crit the solutions of the energy equation (although they still satisfy all the boundary conditions) become nonphysical.  相似文献   

6.
The analysis of laminar mixed convection in boundary layers adjacent to a vertical, continuously stretching sheet has been presented. The velocity and temperature of the sheet were assumed to vary in a power-law form, that is, u w (x)=Bx m and T w (x)−T =Ax n . In the presence of buoyancy force effects, similarity solutions were reported for the following two cases: (a) n=0 and m=0.5, which corresponds to an isothermal sheet moving with a velocity of the form u w =Bx 0.5 and (b) n=1 and m=1, which corresponds to a continuous, linearly stretching sheet with a linear surface temperature distribution, i.e. T w T =Ax. Formulation of the present problem shows that the heat transfer characteristics depends on four governing parameters, namely, the velocity exponent parameter m, the temperature exponent parameter n, the buoyancy force parameter G *, and Prandtl number of the fluid. Numerical solutions were generated from a finite difference method. Results for the local Nusselt number, the local friction coefficient, and temperature profiles are presented for different governing parameters. Effects of buoyancy force and Prandtl number on the flow and heat transfer characteristics are thoroughly examined. Received on 17 July 1997  相似文献   

7.
A numerical treatment for axisymmetric flow and heat transfer due to a stretching cylinder under the influence of a uniform magnetic field and prescribed surface heat flux is presented. Numerical results are obtained for dimensionless velocity, temperature, skin friction coefficient and Nusselt number for several values of the suction/injection, magnetic and curvature parameters as well as the Prandtl number. The present study reveals that the controlling parameters have strong effects on the physical quantities of interest. It is seen that the magnetic field enhances the dimensionless temperature inside the thermal boundary layer, whereas it reduces the dimensionless velocity inside the hydrodynamic boundary layer. Heat transfer rate reduces, while the skin friction coefficient increases with magnetic field.  相似文献   

8.
In this study, laminar boundary layer flow over a flat plate embedded in a fluid-saturated porous medium in the presence of viscous dissipation, inertia effect and suction/injection is analyzed using the Keller box finite difference method. The flat plate is assumed to be held at constant temperature. The non-Darcian effects of convection, boundary and inertia are considered. Results for the local heat transfer parameter and the local skin friction parameter as well as the velocity and temperature profiles are presented for various values of the governing parameters. The non-Darcian effects are shown to decrease the velocity and to increase the temperature. It is also shown that the local heat transfer parameter and the local skin friction parameter increase due to suction of fluid while injection reverses this trend. It is disclosed that the effect of the viscous dissipation for negative values of Ec (T w < T ) is to enhance the heat transfer coefficient while the opposite is true for positive values of Ec (T w > T ). The results are compared with those available in the existing literature and an excellent agreement is obtained.  相似文献   

9.
 An numerical study of the flow and heat transfer characteristics associated with a heated, continuously stretching surface being cooled by a mixed convection flow has been carried out. The relevant heat transfer mechanisms are of interest in a wide variety of practical applications, such as hot rolling, continuous casting, extrusion, and drawing. The surface velocity of the continuously stretching sheet was assumed to vary according to a power-law form, that is, u w (x)=Cx p . Two conditions of surface heating were considered, a variable wall temperature (VWT) in the form T w (x)−T =Ax n and a variable surface heat flux (VHF) in the form q w (x)=Bx m . The governing differential equations are transformed by introducing proper nonsimilarity variables and solved numerically using a procedure based on finite difference approximations. Results for the local Nusselt number and the local friction coefficient are obtained for a wide range of governing parameters, such as the surface velocity parameter p, the wall temperature exponent n, the surface heat flux exponent m, the buoyancy force parameters (ξ for the VWT case and χ for the VHF case), and Prandtl number of the fluid. It is found that the local Nusselt number is increased with increasing the velocity exponent parameter p for the VWT case, while the opposite trend is observed for the VHF case. The local friction coefficient is increased for a decelerated stretching surface, while it is decreased for an accelerated stretching surface. Also, appreciable effects of the buoyancy force on the local Nusselt number and the local friction coefficient are observed for both VWT and VHF cases, as expected. Received on 11 January 1999  相似文献   

10.
The effects of suction/injection on steady laminar mixed convection boundary layer flow over a permeable horizontal surface of a wedge in a viscous and incompressible fluid is considered in this paper. The similarity solutions of the governing boundary layer equations are obtained for some values of the suction/injection parameter f 0, the constant exponent m of the wall temperature as well as the mixed convection parameter λ. The resulting system of nonlinear ordinary differential equations is solved numerically for both assisting and opposing flow regimes using an implicit finite-difference scheme known as the Keller-box method. Numerical results for the reduced skin friction coefficient, the local Nusselt number, and the velocity and temperature profiles are obtained for various values of parameters considered. Dual solutions are found to exist for the case of opposing flow.  相似文献   

11.
 Heat transfer characteristics of a non-Newtonian fluid on a power-law stretched surface of variable temperature with suction or injection were investigated. Similarity solutions of the laminar boundary layer equations describing heat transfer and fluid flow in a quiescent fluid were obtained and solved numerically. Velocity and temperature profiles as well as the Nusselt number, Nu, were studied for two thermal boundary conditions; uniform surface temperature and variable surface temperature, for different parameters; Prandtl number Pr, temperature exponent b, velocity exponent m, injection parameter d and power-law index n. It was found that decreasing injection parameter d, and power-law index n and increasing Prandtl number Pr and surface temperature exponent b enhance the heat transfer coefficient. Received on 27 April 2000  相似文献   

12.
In this paper, the problem of unsteady axisymmetric boundary layer flow and heat transfer induced by a permeable shrinking sheet in the presence of radiation effect is studied. The transformed boundary layer equations are solved numerically by an implicit finite‐difference scheme known as the Keller‐box method. The influence of radiation, unsteadiness and mass suction parameters on the reduced skin friction coefficient f′′(0) and the heat transfer coefficient ?θ′(0), as well as the velocity and temperature profiles are presented and discussed in detail. It is found that dual solutions exist and suction parameter delays the separation of boundary layer. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

13.
The effects of suction or blowing at the surface of a rotating cone in a quiet fluid on the skin friction and heat transfer are described. The equations which govern the fluid motion and thermal energy transfer are transformed by the boundary layer approximations and the resulting equations are solved under the condition that the suction or blowing velocity varies as x n (x: distance measured from the apex of the cone, n: arbitrary constant). The solutions are obtained as a perturbation from the basic laminar flow of an incompressible viscous fluid over the impermeable rotating cone. Detailed numerical calculations are performed for the case of an isothermal rotating cone with uniform blowing or suction, i.e. n=0, the Prandtl number being 0.72. Results are given for the shear stress, heat transfer and velocity and temperature fields. It is shown from the analysis that suction sharply increases the circumferential shear stress and the heat transfer at the surface.Nomenclature c proportional constant - C fx dimensionless skin friction factor, x /(V 2) - C fx0 dimensionless skin friction factor for an impermeable cone - C fy dimensionless circumferential skin friction factor, y /(V 2) - C fy0 dimensionless circumferential skin friction factor for an impermeable cone - c p specific heat at constant pressure - f k function of - g k function of - h heat transfer coefficient, q/(T wT ) - k thermal conductivity of fluid - n arbitrary constant - Nu x local Nusselt number, hx/k - Nu x0 local Nusselt number for an impermeable cone - Pr Prandtl number - q heat transfer rate - r radius of a circular cross section of the cone, x sin - R x Reynolds number, Vx/ - T temperature - T w surface temperature of the cone - T temperature of the surrounding fluid - u fluid velocity in x-direction - v fluid velocity in y-direction - V circumferential velocity at the cone surface, r - w fluid velocity in z-direction - x coordinate along meridional section - y coordinate along a circular cross section - z coordinate perpendicular to both x and y - perturbation parameter, cx n /(x sin )1/2 - dimensionless z-coordinate, z( sin /)1/2 - k function of - kinematic viscosity - density of fluid - x skin friction in x-direction - y circumferential skin friction - stream function - angular speed of the cone  相似文献   

14.
The problem of natural convective heat transfer for a non-Newtonian fluid from an impermeable vertical plate embedded in a fluid-saturated porous medium has been analyzed. Non-Darcian, radiative and thermal dispersion effects have been considered in the present analysis. The governing boundary layer equations and boundary conditions are cast into a dimensionless form and simplified by using a similarity transformation. The resulting system of equations is solved by using a double shooting Runge–Kutta method. The effect of viscosity index n, the conduction–radiation parameter R, the non-Darcy parameter Gr*, the thermal dispersion parameter Ds and the suction/injection parameter fw on the fluid velocities, temperatures and the local Nusselt number are discussed.  相似文献   

15.
The experimental data on the effect of weak and moderate non-equilibrium adverse pressure gradients (APG) on the parameters of dynamic and thermal boundary layers are presented. The Reynolds number based on the momentum thickness at the beginning of the APG region was Re** = 5500. The APG region was a slot channel with upper wall expansion angles from 0 to 14°. The profiles of the mean and fluctuation velocity components were measured using a single-component hot-wire anemometer. The friction coefficients were determined using two methods, namely, the indirect Clauser method and the direct method of weighting the lower wall region on a single-component strain-gage balance. The heat transfer coefficients were determined by a transient method using an IR camera. It is noticed that in the pressure gradient range realized the universal logarithmic region in the boundary layer profile is conserved. The values of the relative (divided by the parameters in zero gradient flow at the same value of Re**) friction and heat transfer coefficients, together with the Reynolds analogy factor, are determined as functions of the longitudinal pressure gradient. The values of the relative friction coefficient reduced to cf/cf0 = 0.7 and those of the heat transfer to St/St0 = 0.9. A maximum value of the Reynolds analogy factor (St/St0)/(cf/cf0) = 1.16 was reached for the pressure gradient parameter β = 2.9.  相似文献   

16.
A rarely adopted simple finite difference scheme has been successfully employed to solve the nonlinear coupled partial differential equations, with nonhomogeneous boundary condition, which describe the free convection at a vertical plate with transpiration. The solution is obtained for a Prandtl number of 0.72, in the blowing parameter range of — 1.9 < Cx < 1.9. The effects of suction and blowing on heat transfer and skin friction are discussed. It is concluded that the boundary layer has a better memory of the upstream suction distribution than of the upstream blowing distribution.  相似文献   

17.
 The effect of uniform suction on the steady two-dimensional laminar forced flow of a viscous incompressible fluid of temperature dependent viscosity past a wedge with uniform surface heat flux is considered. The governing equations for the flow are obtained by using suitable transformations and are solved by using an implicit finite difference method. Perturbation solutions are also obtained near the leading edge and in the downstream regime. The results are obtained in terms of the local skin friction coefficient and the rate of heat transfer for various values of the pertinent parameters, such as the Prandtl number, Pr, the velocity gradient parameter, m, the local suction parameter, ξ, and the viscosity variation parameter, ɛ. Perturbation solutions are compared with the finite difference solutions and are found to be in excellent agreement. The effect of ξ, m and ɛ on the dimensionless velocity profiles and viscosity distribution are also presented graphically for Pr = 0.7 and 7.0, which are the appropriate values for gases and water respectively. Received on 22 July 1999  相似文献   

18.
The aim of this paper is to study the development of mixed convection flow near the stagnation point region over an exponentially stretching/shrinking sheet in nanofluids. The external flow, stretching velocity and wall temperature are assumed to vary as prescribed exponential functions. Using the local similarity method, it has been shown that dual solutions of velocity and temperature exist for certain values of suction/injection, mixed convection, nanoparticle volume fraction and stretching/shrinking parameters. The transformed non-linear ordinary differential equations along with the boundary conditions form a two point boundary value problem and are solved using Shooting method, by converting into an initial value problem. In this method, the system of equations is converted into a set of first order system which is solved by fourth-order Runge–Kutta method. Three different types of nanoparticles, namely copper (Cu), aluminum oxide (Al2O3) and titanium oxide (TiO2) are considered by using water-based fluid with Prandtl number Pr = 6.2. It is also found that the skin friction coefficient and the heat transfer rate at the surface are highest for Copper–water nanofluids as compared to Al2O3. The effect of the solid volume fraction parameter φ of the nanofluids on the heat transfer characteristics is also investigated. The results indicate that dual solutions exist only for shrinking sheet. The effects of various parameters on the velocity and temperature profiles are also presented here.  相似文献   

19.
A boundary layer analysis is presented for a study of the influence of radiation and buoyancy on heat and mass transfer characteristics of continuous surfaces having a prescribed variable surface temperature and stretched with rapidly decreasing power law velocities. The effects of suction in the presence of a quiescent fluid medium of constant temperature are considered. Rosseland approximation is used to describe the radiative heat flux in the energy equation. The transformed governing equations are solved numerically and the velocity and temperature profiles as well as the local Nusselt number and skin friction coefficient are presented. Results show that the effect of radiation is to keep the molten mass away from the slot warmer, reduces the friction factor and increases the heat transfer rate compared to the case with no radiation.  相似文献   

20.
The computational study of the combined effects of radiation and hydromagnetics on the natural convection flow of a viscous,incompressible,and electrically conducting fluid past a magnetized permeable vertical plate is presented.The governing non-similar equations are numerically solved by using a finite difference method for all values of the suction parameter ξ and the asymptotic solution for small and large values of ξ.The effects of varying the Prandtl number P r,the magnetic Prandtl number P r m,the magnetic force parameter S,the radiation parameter R d,and the surface temperature θ w on the coefficients of the skin friction,the rate of heat transfer,and the current density are shown graphically and in tables.An attempt is made to examine the effects of the above mentioned physical parameters on the velocity profile,the temperature distribution,and the transverse component of the magnetic field.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号