Micelle formation of polystyrene-<Emphasis Type="Italic">block</Emphasis>-poly(4-<Emphasis Type="Italic">tert</Emphasis>-butoxystyrene) in hexane

A new type of hexane-soluble polymeric surfactant based on poly(4-tert-butoxystyrene) (P ^t BSt) was prepared by the nitroxide-mediated living radical polymerization, and their self-assemblies in hexane were explored. Polystyrene-block-P ^t BSt diblock copolymers with six different P ^t BSt block lengths were obtained by the sequential living radical polymerization of styrene followed by 4-tert-butoxystyrene using 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as the mediator; Mn(P ^t BSt block) = 13,500, 21,700, 26,600, 47,500, 91,300, and 108,000 at the constant length of the PSt block (Mn = 12,900). Dynamic light-scattering studies demonstrated that the copolymers self-assembled into monodispersed spherical micelles in hexane. The hydrodynamic diameter of the micelles increased with an increase in the P ^t BSt block length. The micellar size also increased as the copolymer concentration increased. However, the size decreased as a result of the increasing temperature due to a decrease in the aggregation number. The ¹H NMR analysis confirmed that the copolymers formed micelles with PSt cores.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Effect of molecular weight of poly-<Emphasis Type="Italic">N</Emphasis>-benzyl-<Emphasis Type="Italic">N,N</Emphasis>-dimethyl-<Emphasis Type="Italic">N</Emphasis>-methacryloyloxyethylammonium chloride on its complexation with sodium dodecyl sulfate

Complexation of a cationic polyelectrolyte, poly-N-benzyl-N,N-dimethyl-N-methacryloyloxyethylammonium chloride, with an ananionic surfactant, sodium dodecyl sulfate, in aqueous solutions is studied. The effect of the molecular weight of the polymer on phase separation in the system and on the stability, conformation, and surface activity of the polyelectrolyte-surfactant complexes is examined.     

Phase-equilibrium and cellulose-coagulation kinetics for cellulose solutions in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

The dissolution of cellulose in N-methylmorpholine-N-oxide monohydrate and the dissolution of N-methylmorpholine-N-oxide monohydrate in water have been studied via optical interferometry. A part of the phase diagram for the cellulose/N-methylmorpholine-N-oxide system has been constructed. The phase diagram is characterized by crystalline equilibrium, hysteresis of the melting temperatures of the solvents, and a region of anisotropy. Optical interferometry has been used for the first time to study the kinetics of cellulose coagulation during the interaction of cellulose solutions in N-methylmorpholine-N-oxide with water and water solutions of N-methylmorpholine-N-oxide. Information on the values of interdiffusion coefficients and the morphologies of the resulting cellulose films has been obtained. The possibility to use optical interferometry to analyze the interaction of a solution with the coagulating agent in the case of cellulose fiber and film formation has been demonstrated. The influences of temperature, the nature of the coagulating agent, and the cellulose content on the kinetics of the process and morphologies of the formed films have been shown. The use of N-methylmorpholine-N-oxide as a part of the coagulation system decreases the rate of interdiffusion of solutions, thereby resulting in a more uniform and dense morphology of cellulose films. Increased temperature causes diffusion acceleration, thereby leading to the formation of an anisotropic morphology of the cellulose films.     

Modifying the thermosensitivity of copolymers of sodium styrene sulfonate and<Emphasis Type="Italic"> N</Emphasis>-isopropylacrylamide with dodecyltrimethylammonium chloride

The interactions between copolymers of sodium styrene sulfonate (SSS) and N-isopropylacrylamide (NIPAM), anionic polyelectrolytes, and dodecyltrimethylammonium chloride (DTAC), a cationic surfactant, were studied in aqueous solutions of various ionic strengths. The copolymers were found to be thermoresponsive, showing a lower critical solution temperature (LCST). The influence of the polymer composition, the surfactant concentration, and the ionic strength on the LCST was studied. The surfactant was found to interact strongly with the polymer, forming mixed polymer-surfactant micelles. The critical aggregation concentration (cac) of the polymer-surfactant system was found from fluorescence spectroscopy using pyrene as a fluorescent probe. A strong dependence of the anionic polyelectrolyte-cationic surfactant interactions on the structure of the ionic comonomer was observed.     

Equilibrium Compositions of HF Solutions in <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide

For HF solutions in DMF, concentration-dependent fractions of DMF molecules (α(DMF)) that remain unassociated and that enter heteroassociates (HAs) of 1 : 1, 4 : 1, and 12 : 1 molecular stoichiometries were obtained by two independent methods, namely, from an analysis of IR spectra and by calculating the material balance. The experimental way was shown to be enough exact in determining the ratio between the solvent molecules in four different states up to ~83 mol % HF. The equilibrium compositions of HF–DMF solutions were estimated over the entire range of concentrations. Starting with [HF] of ~25 mol %, more than one-half HF molecules are associated, and at [HF] of ~50–92 mol %, at least 90% of the HF molecules are associated. The equilibrium composition of HF–organic solvent (Solv) solutions in which HAs of 1 : 1, 1 : 4, and 1 : 12 molecular stoichiometries are formed, can be described by a single set of α(HF–Solv) versus concentration plots.     

Solutions of mixtures of cellulose and synthetic polymers in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

Phase state and morphological features of solutions of cellulose blends with rigid-chain thermotropic LC copolyesters and isotropic poly(m-phenyleneisophthalamide) in the highly polar donor solvent N-methylmorpholine-N-oxide are studied by DSC and polarization microscopy. The ternary phase diagram for the cellulose-copolyesters-N-methylmorpholine-N-oxide system is constructed. Rheological characteristics of the prepared solutions are studied using capillary and rotary rheometers under the regimes of continuous and periodic shear deformation. Rheological characteristics of cellulose solutions with copolyesters in N-methylmorpholine-N-oxide with their different phase states are shown to change in accordance with the traditional mechanism of flow for solutions with high specific interactions between their components. However, the character of the rheological behavior of mixtures of cellulose with poly(m-phenyleneisophthalamide) in N-methylmorpholine-N-oxide primarily stems from structural-morphological transformations in solutions taking place upon deformation.     

The application of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylhydroxylamine as reductant for the separation of plutonium from uranium

Both single stage and multi-stages experiments on stripping plutonium with N,N-dimethylhydroxylamine (DMHAN) as reductant with methylhydrozine (MMH) as supporting reductant were carried out. The effect of contact time, temperature, acidity, concentration of DMHAN on back-extraction rate of plutonium was investigated in the single stage experiment. The results demonstrated that the reaction of stripping Pu(IV) in the organic phase (30% TBP–kerosene) 1BF solutions by DMHAN exhibits excellent stripping efficiency. Under the given conditions, the back-extraction rate of plutonium reaches 90% within 2 min. Higher temperature, lower acidity and the increased concentration of DMHAN benifit the stripping reaction. The concentration profile of HNO₃, uranium and plutonium were determined in a multi-stages mixer-settler after the steady state of the back-extraction, and the multi-stages results show that the plutonium can be separated effectively from uranium. The recovery of plutonium and uranium reach 99.995% or over 99.99% respectively. The separation factor of U from Pu (SF_Pu/U) is about 2 × 10⁴.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Secondary self-assembly behaviors of PEO-<Emphasis Type="Italic">b</Emphasis>-P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS triblock terpolymers in solution

A series of PEO₄₅-b-PtBA₅₃-b-PS _x (x = 42, 84, 165) triblock terpolymers were synthesized by the atom transfer radical polymerization and characterized by size exclusion chromatography and ¹H NMR. Their self-assemblies were conducted by a two-step hierarchical self-assembly method and a one-step dialysis method and the self-assembly behaviors were investigated. The morphologies, sizes, and size distributions of micelles produced by the self-assembly were determined by transmission electron microscopy and dynamic light scattering. The secondary self-assembled structure of PEO₄₅-b-PtBA₅₃-b-PS _x obtained by the two-step hierarchical self-assembly could be controlled by tuning the length of PS block, the core forming block. The micelles were uniform with diameters of 20–25 nm and their size distributions, except for that of PEO₄₅-b-PtBA₅₃-b-PS₁₆₅, were narrow with particle size distribution indexes ranging from 0.014 to 0.246. The one-step dialysis of the triblock terpolymers produced vesicular micelles with distinct vesicle walls that exhibited similar thicknesses. The vesicles did not show significant aggregation. The size distribution of PEO₄₅-b-PtBA₅₃-b-PS₄₂ vesicle was the narrowest with a particle size distribution index value of 0.135. The PEO₄₅-b-PtBA₅₃-b-PS₁₆₅ vesicles tended to overlap with each other.     

Synthesis and properties of organic-inorganic hybrid P(NIPAM-<Emphasis Type="Italic">co</Emphasis>-AM-<Emphasis Type="Italic">co</Emphasis>-TMSPMA) microgels

Utilizing the hydrolysis and condensation of the methoxysilyl moieties, organic-inorganic hybrid poly(N-isopropylacrylamide-co-acrylamide-co-3-(trimethoxysilyl)propylmethacrylate) P(NIPAM-co-AM-co-TMSPMA) microgels were prepared via two different methods. The first method was that the microgels were post-fabricated from the crosslinkable linear P(NIPAM-co-AM-co-TMSPMA) terpolymer aqueous solutions above the lower critical solution temperature (LCST) of the terpolymer. For the second method, the microgels were directly synthesized by conventional surfactant free emulsion copolymerization of NIPAM, AM, and TMSPMA. The hydrodynamic diameter and stability of the resultant P(NIPAM-co-AM-co-TMSPMA) microgels strongly depend on the pH and temperature of the microgel aqueous solution. The hydrodynamic diameters of the microgels decreased with increasing the measuring temperature. The phase transition temperature of the microgels was found to be around 34°C, which was independent of the initial terpolymer concentration and shifted to lower temperature with increasing the preparation temperature. Increasing the initial amount of AM will enhance the instability of the microgels at high pH values. Moreover, the P(NIPAM-co-AM-co-TMSPMA) microgels obtained from the linear terpolymer had more homogeneous microstructures as compared with the corresponding NIPAM/AM/TMSPMA microgels prepared by one step emulsion copolymerization as revealed by light scattering measurements.     

Redox Behavior of Neptunium(V) in Tributyl Phosphate and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dihexyl Octanamide Extractants Dissolved in <Emphasis Type="Italic">n</Emphasis>-Dodecane

Spectrophotometric investigations have been carried out on the disproportionation of Np(V) to form Np(IV) and Np(VI) in 1.1 mol⋅L⁻¹ solutions of tributyl phosphate (TBP) and in N,N-dihexyl octanamide (DHOA) in n-dodecane medium. The Np(V) was found to coordinate with Np(IV) in 1.1 mol⋅L⁻¹ TBP solution in n-dodecane to form a mixed valence “cation–cation” complex by bonding through an axial oxo group on Np(V). By contrast, this interaction was less prominent in the case of 1.1 mol⋅L⁻¹ DHOA solutions. The effect of 1-octanol, added as phase modifier, on the disproportionation behavior of Np(V) was also investigated. An attempt was made to calculate the disproportionation/reduction rate constants for Np(V) under the conditions of these studies. Absorbance measurements on the Np stripped from organic phases revealed the occurrence of Np(V) in the aqueous phase.     

Effect of glycine on the surface activity and micellar properties of <Emphasis Type="Italic">N</Emphasis>-decanoyl-<Emphasis Type="Italic">N</Emphasis>-methylglucamide

Surface activity, micelle formation and structure of N-decanoyl-N-methylglucamide in presence of increasing glycine concentrations have been investigated. Changes in the critical micelle concentration of the surfactant with the addition of the amino acid were examined by both surface tension and pyrene 1:3 ratio methods. The observed reduction in the critical micelle concentration was attributed to the structure making action of the additive. Micelle structure parameters were obtained as a function of the glycine concentration by using light scattering and fluorescence-quenching measurements. As regard to the effect of glycine of the micelle size, it was found that both the hydrodynamic radius and the micellar aggregation number increased with the glycine concentration. However, the observed micellar growth seems to be mainly determined by the increase in the aggregation number rather than by changes in the amount of water specifically associated to the micelle. This fact is also supported by the observed trend in the micellar partial specific volume as estimated by complementary density measurements.     

Molecular and associative properties of <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone copolymers with <Emphasis Type="Italic">N</Emphasis>-crotonoylaminocaproic acid in dilute solutions

The random copolymers of N-vinylpyrrolidone and N-crotonoylaminocaproic acid attractive for the modification of drugs are studied by static and dynamic light scattering, viscometry, and sedimentation-diffusion analysis. The content of functional groups in the copolymers is 14.1–27.0 mol %. Analysis is performed in 0.1 N aqueous solutions of sodium acetate and dimethylformamide. The molecular characteristics of the copolymers with various composition are determined. It is shown that supramolecular structures are present in copolymer solutions and their amount depends on copolymer composition; the effect of solvent on the formation of these structures is ascertained.     

Hydration of Aliphatic <Emphasis Type="Italic">N</Emphasis>-Acetyl Amino Acid Amides in Solution

The temperature and concentration dependences of the ultrasound speed and density of aqueous solutions of aliphatic N-acetyl α-amino acid amides were studied using the adiabatic compression method. Parameters of the hydrate complexes formed therein were estimated on a quantitative level. The hydration number and molar compressibility of the complexes were shown to be almost independent of temperature in the range from 5 to 35°C.     

Grafting of poly-<Emphasis Type="Italic">N</Emphasis>-methacryloylaminodeoxyglucose on poly-<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

A graft copolymer simulating glycoprotein was prepared by reaction of poly-N-methacryloylaminodeoxyglucose containing terminal amino group with a copolymer of N-vinylpyrrolidone and acrylic acid N-hydroxysuccinimide ester.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1356–1359.Original Russian Text Copyright © 2004 by Nazarova, Pavlov, Kever, Afanaseva, Panarin.     

Homogeneous alkalization of cellulose in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide/water solution

Alkali cellulose is an important intermediate in the production of cellulose derivatives. N-methylmorpholine-N-oxide (NMMO)/H₂O was used as a homogeneous reaction medium for the cellulose alkalization process to intensify the alkalization degree and improve the substitution uniformity. The morphology, specific surface area and crystalline structure of pristine cellulose, the as-synthesized alkali cellulose and dissolved-regenerated cellulose were characterized by SEM, BET, XRD and FT-IR, respectively. The results showed that the homogeneous reaction medium not only offered a low mass transfer resistance, but also facilitated a disruption of the hydrogen bond in cellulose, thus resulting in the transformation of the cellulose structure from complicated stacking chains to simple glucose chains. The interior hydroxyl groups in the cellulose became accessible to the alkaline reagent NaOH to enhance the alkalization process for the increase in bonding alkali content and the improvement in substitution uniformity. The bonding alkali content was calculated by the difference between total added alkali and free alkali and was achieved as 0.61 g/g cellulose at the optimized operation conditions: reaction temperature of 95 °C, reaction time of 90 min, NMMO dosage of 90.00 g, cellulose 1.0 g and NaOH concentration of 1.40 wt%. Meanwhile, in the conventional alkalization process, the bonding alkali content was just 0.41 g/g cellulose. The alkali cellulose prepared in NMMO/H₂O medium has a large specific surface area of 125 m² g^?1 and an extremely low crystallinity degree. The NMMO/H₂O system represents a potential homogeneous solvent for the cellulose alkalization process.     

Synthesis of amino acid conjugates of glycyrrhizic acid using <Emphasis Type="Italic">N</Emphasis>-hydroxyphthalimide and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>'-dicyclohexylcarbodiimide

Synthesis of amino acid conjugates of glycyrrhizic acid with the use of N-hydroxyphthalimide, N,N'-dicyclohexylcarbodiimide, and tert-butyl esters of L-amino acids (valine, isoleucine, phenylalanine, and methionine) was performed followed by deprotection with trifluoroacetic acid. The target amino acid conjugates were isolated by column chromatography on silica gel in 40–45% yield. The structure of the prepared compounds was confirmed by IR and ¹³C NMR spectroscopy.