3-Ferrocenyl-1-methyl- and 1-ferrocenyl-3-methylcyclopropenes

Dehydrobromination of isomeric 3-bromo-1-ferrocenyl-2-methylcyclopropanes afforded 3-ferrocenyl-1-methyl- and 1-ferrocenyl-3-methylcyclopropenes. These undergo smooth opening of the three-membered ring to give 1- and 2-ferrocenylbuta-1,3-dienes and 1- and 2-methyl-1H-cyclopentaferrocenes; with 1,3-diphenylisobenzofuran they give the classical Diels-Alder adducts.     

Effects of complexants on [Ni1/3Co1/3Mn1/3]CO3 morphology and electrochemical performance of LiNi1/3Co1/3Mn1/3O2

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials for the application of lithium ion batteries were synthesized by carbonate co-precipitation routine using different ammonium salt as a complexant. The structures and morphologies of the precursor [Ni_1/3Co_1/3Mn_1/3]CO₃ and LiNi_1/3Co_1/3Mn_1/3O₂ were investigated through X-ray diffraction, scanning electron microscope, and transmission electron microscopy. The electrochemical properties of LiNi_1/3Co_1/3Mn_1/3O₂ were examined using charge/discharge cycling and cyclic voltammogram tests. The results revealed that the microscopic structures, particle size distribution, and the morphology properties of the precursor and electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ were primarily dependent on the complexant. Among all as-prepared LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials, the sample prepared from Na₂CO₃–NH₄HCO₃ routine using NH₄HCO₃ as the complexant showed the smallest irreversible capacity of 19.5 mAh g⁻¹ and highest discharge capacity of 178.4 mAh g⁻¹ at the first cycle as well as stable cycling performance (98.7% of the initial capacity was retained after 50 cycles) at 0.1 C (20 mA g⁻¹) in the voltage range of 2.5–4.4 V vs. Li⁺/Li. Moreover, it delivered high discharge capacity of over 135 mAh g⁻¹ at 5 C (1,000 mA g⁻¹).     

Chemistry and polymerization of 1, 1, 3, 3-tetramethyl-1, 3-disila-2-oxaindane

Reaction of o-dichlorobenzene with dimethylmethoxychlorosilane and sodium leads to the isolation of dimethyl(o-chlorophenyl) methoxysilane, o-bis(bimethylmethoxysilyl)benzene, 1,1,3,3-tetramethyl-1,3-disila-2-oxaindane, and 1, 1-dimethyl-1-silarribenzocycloheptatriene. When I is polymerized with H₂SO₄, the phenyl group is observed to split off.     

Y2O3包覆LiCo1/3Ni1/3Mn1/3O2的电化学性能

通过在硝酸钇水溶液浸渍并焙烧的简单工艺,在LiCo1/3Ni1/3Mn1/3O2材料表面包覆了一层Y2O3.采用X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),循环伏安(CV)和恒流充放电对包覆和未包覆的LiCo1/3Ni1/3Mn1/3O2进行了测试分析.结果表明,Y2O3包覆并没有改变LiCO1/3Ni1/3Mn1/3O2的晶体结构,只存在于LiCo1/3Ni1/3Mn1/3O2的表面;与未包覆的材料相比,Y2O3包覆后的材料在高电位下具有更好的容量保持率和放电容量.CV测试表明,包覆层的存在有效抑制了材料层状结构的转变及电极与电解液的负反应.     

Kinetics of the reactions of cyclopropane derivatives. V. The gas-phase unimolecular reactions of 1 α-chloro-2α,3α-dimethylcyclopropane and 1α-chloro-2α,3β-dimethylcyclopropane

Thermolysis of the “all-cis” compound 1α-chloro-2α,3α-dimethylcyclopropane (A) at 550–607 K and 6–115 torr is a first-order homogeneous non-radical-chain process giving penta-1,3-diene (PD) and HCl as products. The Arrhenius parameters are log₁₀A(sec^?1) = 13.92 ± 0.08 and E = 199.6 ± 0.9 kJ/mol. The isomer with trans-methyl groups, 1α-chloro-2α,3β-dimethylcyclopropane (B) reacts by two parallel first-order processes giving as observed products trans-4-chloropent-2-ene (4CP) and PD + HCl, with log₁₀A(sec^?1) = 14.6 and 13.8, respectively, and E = 199.5 and 190.2 kJ/mol, respectively. The 4CP undergoes secondary decomposition to PD + HCl (as investigated previously). Comparison of the results for compounds (A) and (B) with those for other gas-phase and solution reactions leads to the conclusion that the gas-phase thermolyses proceed by rate-determining ring opening to form olefins which may decompose further by thermal or chemically activated reactions, and that the ring opening is a semiionic electrocyclic reaction in which alkyl groups in the 2,3-positions trans to the migrating chlorine semianion move apart, with appropriate consequences for the rate of reaction and the stereochemistry of the products.     

Synthesis of higher 1-amino-3-alkanonoximes and 1-hydroxy-3-alkanonoximes

Conclusions Some higher 1-amino-3-alkanonoximes and l-hydroxy-3-alkanonoximes were synthesized in order to study their extraction properties toward the nonferrous metals.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimlcheskaya, No. 5, pp. 1174–1177, May, 1982.