Square-wave voltammetric determination of thallium using surface modified thick-film graphite electrode with Bi nanopowder

Trace analysis of thallium at surface modified thick-film graphite electrode with Bi nanopowder has been carried out using square-wave anodic stripping voltammetry (SWASV) technique. The Bi nanopowder electrode exhibited a well-defined response relating to the oxidation of Tl. From the linear relationship between Tl concentration and peak current, the sensitivity of the Bi nanopowder electrode was quantitatively estimated. The detection limit of Tl was determined to be 0.03 μg/L for 1.0 μg/L Tl solution under 10 min accumulation, which is lower than the reported values for a Bi film electrode. Furthermore, it is confirmed that EDTA addition effectively eliminates the Pb and Cd interferences in the course of Tl determination by forming complexes with Pb²⁺ and Cd²⁺.     

A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

A highly selective colorimetric and fluorescent chemosensor for Cr2+ in aqueous solutions

A new rhodamine-based chemosensor was synthetized through a modified copper-catalyzed [3+2]-cycloaddition of an azidocoumarin with an alkynyl-rhodamine. Its sensing properties toward various metal cations in aqueous solutions were investigated by colorimetric changes, UV–vis and fluorescence spectroscopies. The sensor exhibited a high selectivity for Cr²⁺ over Cr³⁺ and other divalent cations such as Cu²⁺, Mg²⁺, Zn²⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺ and Ni²⁺. The linear range of detection by fluorescence spectroscopy is 0.07–3.5 mM, with a detection limit of ca. 64 μM. The binding mode of Cr²⁺ with the sensor was rationalized through experimental evidences.     

A lysosomal targeting fluorescent probe and its zinc imaging in SH-SY5Y human neuroblastoma cells

A fluorescent probe based PET mechanism was designed, and the probe could image endogenous release of Zn²⁺ upon H₂O₂ stimulation in SH-SY5Y cells.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

Quinoline-based highly selective and sensitive fluorescent probe specific for Cd2+ detection in mixed aqueous media

Quinoline-based fluorescent probe as a recognition unit was designed and synthesized in this study. The probe R1 displayed excellent selectivity and sensitivity for cadmium ions (Cd²⁺) over a wide range of metal ions in acetonitrile-water (MeCN-H₂O) mixed solution. In order to better understand the recognition mechanism between probe and Cd²⁺, the density functional theory calculations were performed. Finally, the colorimetric experiment result was observed and conveniently monitored by the naked eye, and a visual detection limit of 4 × 10^?6 mol L^?1 was achieved. These experimental results indicated the promising potential of the probe to detect Cd²⁺ in biological system. Furthermore, the probe R1 was successfully used for the highly sensitive detection of Cd²⁺ in living cells.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

Improvement in performance of a flow electrochemical sensor by using carbamoyl-arms polyazamacrocycle for the preconcentration of lead ions onto the electrode

A flow electrochemical sensor for trace analysis of lead, using TETRAM-modified graphite felt electrode is reported here. TETRAM ligands are covalently immobilized on the graphite felt by chemical reactions on amino acid linkers, previously attached to the electrode by an electrochemical process. The detection is performed in two steps: the preconcentration of Pb²⁺ ions by complexation with immobilized TETRAM and the analysis by linear sweep stripping voltammetry. A calibration curve typical of at least two equilibrium processes is obtained. A limit of detection of 2.5 × 10^?8 mol L^?1 is reached for a total analysis time of 35 min. Interestingly, the flow sensor shows a good selectivity toward lead in presence of Cu²⁺, Cd²⁺, Ni²⁺, Zn²⁺ and Co²⁺ ions. This new sensor exhibits improved sensitivity and selectivity compared to the previously reported sensor using cyclam-modified electrode. It is stable after three uses, using strong acidic medium for the regeneration step.     

Facile and Simultaneous Stripping Determination of Zinc,Cadmium and Lead on Disposable Multiwalled Carbon Nanotubes Modified Screen‐Printed Electrode

Screen‐printed electrodes (SPEs) are cheap and disposable. But their application for heavy metal detection is limited due to the low sensitivity and poor selectivity. Here we report the ultrasensitive and simultaneous determination of Zn²⁺, Cd²⁺ and Pb²⁺ on a multiwalled carbon nanotubes and Nafion composite modified SPE with in situ plated bismuth film (MWCNTs/NA/Bi/SPE). The linear curves range from 0.5–100 µg L^?1 for Zn²⁺ and 0.5–80 µg L^?1 for Cd²⁺. Uniquely, the linear curve for Pb²⁺ ranges from 0.05–100 µg L^?1 with a detection limit of 0.01 µg L^?1. The practical application was verified in real samples with satisfactory results.     

Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

Coumarin-based fluorescent chemosensor for the selective quantification of Zn2+ and AcO− in an aqueous solution and living cells

In this work, we report a novel fluorescence chemosensor HM based on the coumarin fluorophore for the quantification of Zn²⁺ and AcO^?. HM specifically binds to Zn²⁺ in the presence of other competing cations, and evident changes in UV–vis and fluorescence spectra in HEPES buffer are noticed. The in situ generated HM-Zn²⁺ complex solution exhibit a high selectivity toward AcO^? via Zn²⁺ displacement approach. The detection limits of HM for Zn²⁺ and HM-Zn²⁺ for AcO^? were estimated to be 7.24 × 10^?8 M and 9.41 × 10^?8 M, respectively. HM and the resultant complex HM-Zn²⁺ exhibit low cytotoxicity and cell-membrane permeability, which makes them capable of Zn²⁺ and AcO^? imaging in living Hep G2 cells. A B3LYP/6-31G(d,p) basis set was employed for optimization of HM and HM-Zn²⁺ complex.     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

Amberlite XAD-7 resin impregnated with 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol for enrichment of metal ions

The Amberlite XAD-7 resin modification was carried out by loading 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol (CPDPINP). Subsequently, this new sorbent was applied for the enrichment of metal ions such as Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions. The effect of various parameters on their sorption and following recoveries was studied in column procedure. The preconcentrated ions were eluted by appropriate eluent and their contents were quantified by FAAS. This method has preconcentration factor of 150 and enrichment factor in the range of 20.8–29.1. At optimum values of all variables, the proposed method has linear calibration graphs in the range of 0.01 up to 0.29 μg mL⁻¹ with detection limit (3SDb/m, n = 15) between 1.6 and 2.6 ng mL⁻¹. This protocol is usable for successful analysis of Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions in different matrices with reasonable recoveries (>93%) and acceptable relative standard deviation (<4.7%).     

Electrodes with extremely high hydrogen overvoltages as substrate electrodes for stripping analysis based on bismuth-coated electrodes

Hydrogen evolution bothers stripping analysis significantly. Dioctyl phthalate-based carbon paste electrode exhibits extremely wide cathodic potential window. It is explored as a powerful substrate electrode to solve the problem of hydrogen evolution and further improve reproducibility for stripping analysis using bismuth-coated electrodes for the first time. It was successfully applied to the simultaneous determination of Zn²⁺, Cd²⁺, and Pb²⁺. Linear responses are obtained for Zn²⁺ in the range of 10–100 μg L⁻¹ and for Pb²⁺ and Cd²⁺ in the range of 5–100 μg L⁻¹. The detection limits for Zn²⁺, Cd²⁺, and Pb²⁺ are 0.1 μg L⁻¹, 0.22 μg L⁻¹ and 0.44 μg L⁻¹, respectively. The method has been successfully applied to the determination of Zn²⁺, Cd²⁺, and Pb²⁺ in waste water samples. The detection strategy based on the combination of dioctyl phthalate-based carbon paste electrode and bismuth-coated electrodes holds great promise for stripping analysis.     

Temperature controlled ionic liquid-dispersive liquid phase microextraction for determination of trace lead level in blood samples prior to analysis by flame atomic absorption spectrometry with multivariate optimization

This paper described a new approach for the preconcentration of lead (Pb²⁺) by temperature controlled ionic liquid-dispersive liquid phase microextraction (TIL-DLME) prior to analyzing by flame atomic absorption spectrometry (FAAS). An ionic liquid (IL) 1-Butyl-3-methylimidazolium hexafluorophosphate [C₄MIM][PF₆] was used as an extractant solvent. The Pb²⁺ was complexed with ammonium pyrrolidinedithiocarbamate (APDC) and then entered into the infinite IL drops at high temperature (> 70 °C). Important variables affecting the microextraction efficiency such as pH, ligand concentration, amount of IL, temperature and incubation time were investigated. The results showed that the coexistent ions had no obvious negative effect on the determination of Pb²⁺. In the optimum experimental conditions, the limit of detection (LOD) and the enhancement factor (EF) were 0.13 μg L^? 1 and 93, respectively. The relative standard deviation (RSD) of 10 μg L^? 1 Pb²⁺ was 4.3%. The developed method was validated by determining Pb²⁺ in certified reference material (CRM) and the results showed that the determined values of Pb²⁺ were in good agreement with the certified value. The proposed method was applied satisfactorily for the preconcentration of Pb²⁺ in acid digested blood samples of children with different respiratory disorders.     

A novel highly selective ratiometric fluorescent sensor for relay recognition of Zn2+ and H2PO4−

A novel fluorescent sensor (AQTF1) based on the N-(quinolin-8-yl) tetrahydrofuran-2-carboxamide was designed and synthesized. This new sensor demonstrated high selectivity for the Zn²⁺ without the interference from Cd²⁺. The detection limit of this probe was calculated to be 10.8 nM for Zn²⁺. The in situ prepared AQTF1-Zn²⁺ complex was used for detection of H₂PO₄^? and displayed good selectivity from the common anions. Furthermore, the AQTF1 displayed good ratiometric response for the relay recognition for Zn²⁺ and H₂PO₄^?.     

Electroanalytical detection of heavy metals using metallophthalocyanine and silica-coated iron oxide composites

The monitoring of heavy metal ions particularly in water is important in safeguarding the environment and humans from the toxic effects these metal ions pose. This work describes the synthesis, characterization and electrocatalytic properties of silica-coated iron oxide nanoparticles (Si-NP) in the presence of cobalt or iron phthalocyanines (MPc) for heavy metal (HM) detection. TEM, XRD, XPS and VSM confirmed the successful synthesis of Si-NP with an average diameter of 12.07 nm. The electrochemical sensing properties of MPc/Si-NP-modified glassy carbon electrodes (GCE) were assessed for HM detection. Differential pulse anodic stripping voltammetry (DPASV) studies indicated detection limits that compared positively with the literature. The FePc/Si-NP composite showed the lowest detection limits (S/N?=?3) of 3.66, 11.56, 2.28, 4.54 μg L^?1 for arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb), respectively. A linear working range of 10–100 μg L^?1 was obtained for As³⁺, Hg²⁺ and Pb²⁺ ions while it was between 20 and 100 μg L^?1 for Cd²⁺ ions. Both composites displayed reproducible signals for the simultaneous detection of the HMs for ten consecutive scans. These composites offer a cheap and simplistic sensing device for HM analysis.     

The Fabrication and Characterization of a Bismuth Nanoparticle Modified Boron Doped Diamond Electrode and Its Application to the Simultaneous Determination of Cadmium(II) And Lead(II)

We report the simultaneous electroanalytical determination of Pb²⁺ and Cd²⁺ by square‐wave anodic stripping voltammetry (SWASV) using a bismuth nanoparticle modified boron doped diamond (Bi‐BDD) electrode. Bi deposition was performed in situ with the analytes, from a solution of 0.1 mM Bi(NO₃)₃ in 0.1 M HClO₄ (pH 1.2), and gave detection limits of 1.9 μg L^?1 and 2.3 μg L^?1 for Pb(II) and Cd(II) respectively. Pb²⁺ and Cd²⁺ could not be detected simultaneously at a bare BDD electrode, whilst on a bulk Bi macro electrode (BiBE) the limits of detection for the simultaneous determination of Pb²⁺ and Cd²⁺ were ca. ten times higher.     

Comparative of the removal of Pb2+, Cd2+ and Ni2+ by nano crystallite hydroxyapatite from aqueous solutions: Adsorption isotherm study

Release of heavy metal onto the water and soil as a result of agricultural and industrial activities may pose a serious threat to the environment. In this study, the adsorption behavior of nano hydroxyapatite with respect to Pb²⁺, Cd²⁺ and Ni²⁺ has been studied in order to consider its application to purity metal finishing wastewater. The batch method has been employed, using metal concentrations in solution ranging from 100 to 400 mg/L. The uptake capacity and distribution coefficients (K_d) were determined for the adsorption system as a function of sorbate concentration. The Langmuir, Freundlich, and Dubinin–Kaganer–Radushkevich (DKR) isotherms applied for sorption studies showed that the amount of metal sorbed on nano hydroxyapatite. It was found that the adsorption phenomena depend on charge density and hydrated ion diameter. According to the equilibrium studies, the selectivity sequence can be given as Pb²⁺ > Cd²⁺ > Ni²⁺. These results show that nano hydroxyapatite holds great potential to remove cationic heavy metal species from industrial wastewater.