Assembling of a novel 3D Ag(I)-MOFs with mixed ligands tactics: Syntheses,crystal structure and catalytic degradation of nitrophenol

A novel 3D Ag(I)-MOFs, [Ag₂(H₃ddcba)(dpp)₂] (1), which features pcu (4¹²·6³) topology were successfully synthesized. Complex 1 exhibits predominant catalytic activity towards the degradation of o-nitrophenol (2-NP), m-nitrophenol (3-NP) and p-nitrophenol (4-NP) in aqueous solution.     

Synthesis of a reduction-sensitive Bletilla striata polysaccharide amphiphilic copolymer

A reduction-sensitive stearic acid modified-Bletilla striata polysaccharide amphiphilic copolymer is synthesized. The copolymer enabled to spontaneously form micelles which display faster docetaxel release rates under reduction condition and enhanced anticancer activity in vitro after incorporating docetaxel into micelles.     

Organocatalytic chemoselective monoacylation of 1,n-linear disulfonamides

Predominant monoacylation of 1,n-linear disulfonamides took place in the presence of pyrrolidinopyridine-type organocatalysts when the chain length of the linear disulfonamides was n = 3, 4, or 5 (monoacylate/diacylate = up to 44). The chemoselectivity of the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and N,N′-ditosyl-1,3-propanediamine (n = 3) was found to be 36, favoring the former substrate. Different chain length by only one carbon atom was discriminated in the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and of N,N′-ditosyl-1,4-butanediamine (n = 4) with the relative acylation rate of 16 in the presence of the organocatalyst.     

Red-emitting salicylaldehyde Schiff base with AIE behaviour and large Stokes shift

Three salicylaldehyde Schiff base (SSB) with AIE behavior were designed and facilely synthesized through a condensation reaction. In solid and aggregation states, these SSB dyes exhibited yellow to red emission with large Stokes shift. One of SSB dyes could specifically stain lipid droplets in living cells.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

An improved synthesis of 3-[3-(trifluoromethyl)-3H-1,2-diazirin-3-yl]aniline: A key intermediate in the synthesis of photoaffinity probes

An improved synthesis of 3-[3-(trifluoromethyl)-3H-1,2-diazirin-3-yl]aniline, achieving an overall yield of 38% over seven steps is reported. Only three chromatographic separations were needed and the preparation of ～0.7 g of the target compound was demonstrated. The stability of the diazirine in solution at room temperature while exposed to ambient light was studied. No significant degradation of the compound was observed over the course of five weeks in a 130 mM sample and only minor degradation was observed in weaker samples (10, 5, and 2.5 mM), as demonstrated by ¹H and ¹⁹F NMR.     

Forced proximity of nitroxide groups in pincer compounds with a xanthene spacer

We designed bisnitroxide compounds where the radical sites are located close to each other in a molecule. Two new pincer-type bisnitroxide compounds have been synthesized, involving xanthene-4,5-diyl as a spacer and tert-butyl phenyl nitroxides as arms. From the X-ray crystal structure analysis, the shortest intramolecular interatomic N?O and O?O distances respectively are 5.074(6) and 5.258(6) Å for the m,m′-derivative and 3.624(3) and 3.771(3) Å for the p,p′-derivative. The N?O distance in the latter satisfies the empirical criterion for possible dimerization/degradation reaction accompanied by dia-/paramagnetic transition. However, the magnetic study clarified paramagnetic behavior in all the temperature range. According to a singlet-triplet model, antiferromagnetic couplings were characterized with 2J/k_B = ?7.71(2) and ?8.83(4) K for the m,m′ and p,p′-derivatives, respectively. The present result suggests that a more flexible spacer is required for realization of possible dia-/paramagnetic transition.     

Highly selective fluorescence turn-on determination of fluoride ions via chromogenic aggregation of a silyloxy-functionalized salicylaldehyde azine

A novel fluorescent chemsensor TBS-protected salicylaldehyde azine (TSAA) for fluoride ion was developed based on aggregation-induced emission (AIE). The probe TSAA was prepared by the reaction of salicylaldehyde azine (SAA) with tert-butyldimethylsilyl chloride (TBS-Cl) via an unusual synthetic methodology and shows only non-emission. Upon treatment with fluoride in aqueous MeCN solution, the TBS protective group of probe TSAA was removed readily and the fluorescence of the probe was switched on, which resulted in a new fluorescence peak around 543 nm. The fluorescent intensity at 543 nm increases linearly with fluoride ion concentration in the range 1–50 μmol L^?1. This proposed probe shows excellent selectivity toward fluoride ion over other common anions and cations.     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

In situ measurement of biaxial modulus of Si anode for Li-ion batteries

We report in situ measurement of biaxial moduli of a Si thin-film electrode as a function of its lithium concentration. During lithiation, biaxial compressive stress is induced in the Si film and it undergoes plastic flow. At any state-of-charge (SOC), a relatively small delithiation–relithiation sequence unloads and reloads the film elastically. From the stress and strain changes during a delithiation–relithiation cycle, the biaxial modulus of the film is calculated. Stress change is obtained by measuring the change in substrate curvature using a Multi-beam Optical Sensor; the elastic strain change is obtained from the change in SOC. By repeating these measurements at several different values of SOC, the biaxial modulus was seen to decrease from ca. 70 GPa for Li_0.32Si to ca. 35 GPa for Li_3.0Si. Such a significant reduction in elastic modulus has important implications for modeling stress evolution and mechanical degradation in Si-based anodes.     

Using enantioselective dispersive liquid–liquid microextraction for the microseparation of trans-cyclohexane-1,2-diamine enantiomers

A new chiral separation system effective for the enantioselective extraction of racemic trans-cyclohexane-1,2-diamine is presented. Enantioselective dispersive liquid–liquid microextraction has been used for the chiral microseparation of trans-cyclohexane-1,2-diamine, with a chiral azophenolic crown ether being identified as a versatile chiral selector. The influence of various process conditions on the extraction performance was studied experimentally. It was found that the operational selectivity in one extraction step is mainly related to the type and volume of the solvents, chiral selector concentration, extraction time, temperature of sample solution, and pH. At optimum conditions (300 μL of diethyl ether as the extraction solvent 1 mL of methanol as the disperser solvent, with 5 mmol L^?1 chiral selector concentration, pH of the sample equal to 4.5, 30 min extraction time and a temperature of 10 °C), the distribution ratio of (R,R)- and (S,S)-trans-cyclohexane-1,2-diamine was 18.3 and 1.8, respectively, while the enantioselectivity value of 10.2 was found at the optimum condition.     

Synthesis,spectroscopic, structural and thermal characterizations of [(C7H6NO4)2TeBr6·4H2O]

Tellurium (IV) complexes with pyridine-2,6-dicarboxylate ligand were synthesized by slow evaporation from aqueous solutions yielding a new compound: [(C₇H₆NO₄)₂TeBr₆·4H₂O]. The structure of this compound was solved and refined by single-crystal X-ray diffraction. The compound is centrosymmetric P2₁/c (N°: 14) with the parameters a = 8.875(5) Å, b = 15.174(5) Å, c = 10.199(5) Å, β = 94.271° (5) and Z = 2. The structure consists of isolated H₂O, isolated [TeBr₆]^2? octahedral anions and (pyridine-2,6-dicarboxylate) [C₇H₆NO₄]⁺ cations. The stability of the structure was ensured by ionic and hydrogen bonding contacts (N–H?Br and O–H?Br) and Van-Der Walls interaction. The thermal decomposition of the compound was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The FTIR and Raman spectroscopy at different temperatures confirm the existence of vibrational modes that correspond to the organic, inorganic and water molecular groups. Additionally, the UV–Vis diffuse reflectance spectrum was recorded in order to investigate the band gap nature. The measurements show that this compound exhibits a semiconducting behavior with an optical band gap of 2.66 eV.     

In-line Raman spectroscopy and advanced process control for the extraction of anethole and fenchone from fennel (Foeniculum vulgare L. MILL.)

Plants are a desirable source for molecules of all kinds and for every purpose. Besides traditional techniques for extraction, plants are challenging for modern process engineering due to great variations because of their natural origin. One way to ensure high quality and low costs, as well as highly resource-efficient extraction, is in-line monitoring and process control. This study demonstrates the use of in-line Raman spectroscopy for monitoring the extraction of anethole and fenchone from fennel seed as a typical example. A partial least square calibration model with high accuracy was created. (Anethole: R² = 0.99, root mean square error of calibration (RMSEC) = 0.01256 g/L, root mean square error of validation (RMSEV) = 0.02608 g/L, and calibration range up to 2 g/L. Fenchone: R² = 0.98, RMSEC = 0.01188 g/L, RMSEV = 0.01945 g/L, and calibration up to 0.75 g/L.) These data are directly linked to a physicochemical process model to control the extraction process in real time and to perform predictive simulations while processing. The added value of this approach for modern phytoextraction is highlighted and exemplified as a major step toward sustainable Green Extraction processes.     

Carrier dynamics in CsPbI3 perovskite microcrystals synthesized in solution phase

Carrier diffusion and recombination kinetics in all-inorganic CsPbI₃ perovskite microcrystals directly synthesized in solution phase are reported.     

Poly(m-ferrocenylaniline) modified carbon nanotubes-paste electrode encapsulated in nafion film for selective and sensitive determination of dopamine and uric acid in the presence of ascorbic acid

A nafion covered carbon nanotubes-paste electrode modified with poly(m-ferrocenylaniline), (Nf/p(FcAni)-CNTsPE), provides a novel voltammetric sensor for the selective determination of dopamine (DA) and uric acid (UA) in the presence of ascorbic acid (AA). We studied the electrochemical activity of Nf/p(FcAni)-CNTsPE toward DA, UA, and AA by differential pulse voltammetry (DPV). DA and UA anodic peaks appear at 0.30 and 0.45 V, respectively while an anodic peak for AA was not observed. DPV oxidation peak values are linearly dependent on DA concentration over the range 1–150 μM (r² = 0.992), and on UA concentration over the range 5–250 μM (r² = 0.997). DA and UA detection limits are estimated to be 0.21 and 0.58 μM, respectively. The modified electrode shows both good selectivity and reproducibility for the selective determination of DA and UA in real samples. Finally, the modified electrode was successfully applied for the determination of DA and UA in pharmaceutical or biological sample fluids.     

A rapid and sensitive UPLC–MS/MS method for quantitative determination of arformoterol in rat plasma,lung and trachea tissues

A rapid and sensitive ultra-performance liquid chromatography-tandem mass spectrometry (UPLC–MS/MS) method was developed and fully validated for determination of arformoterol in rat plasma, lung and trachea tissues.     

Improved activity of SnO for the photocatalytic oxygen evolution

SnO prepared by soft chemistry exhibits a black color and semiconducting properties. The X-ray diffraction indicates a tetragonal symmetry (SG: P4/nmm) with nano crystallites of an average size of 85 nm. The forbidden band, determined from the diffuse reflectance is found to be 1.46 eV. The electrical conductivity occurs by polaron hopping and follows an Arrhenius type law with activation energy of 0.21 eV, the change in the slope at 526 K is attributed to the oxidation to SnO₂. The photo-electrochemical study shows n type conduction with a flat band potential of ?0.45 V, close to the photocurrent onset potential (?0.40 V). The electrochemical impedance spectroscopy shows the bulk contribution of SnO (R_b = 1.7 kΩ cm²) and decreases down to 1.89 kΩ cm² under illumination. The photocatalytic properties have been evaluated for the first time for to the oxygen evolution. The valence band, deriving from Sn²⁺: 5p orbital with a potential (?0.80 V_SCE/5.55 eV), is suitably positioned with respect to O₂/H₂O level (～0.6 V_SCE), leading to water oxidation under visible light. The best performance occurs at pH ～ 7 with an oxygen liberation rate of 23 µmol mL h^?1 (mg catalyst)^?1 and a quantum efficiency of 1.2%. An improvement of ～13% is observed on the system SnO/clay.     

Synthesis and properties of novel heat-resistant fluorescent conjugated polymers with bisindolylmaleimide

Novel conjugated polymers with bisindolymaleimide were synthesized via simple metal-free condensation polymerization. The polymers exhibited high glass transition temperatures and decomposition temperatures with considerable luminescent properties.     

Anionic polymerization initiated by lithium amides for preparing high molecular weight polyacrylonitrile

Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.     

One-pot photoreduction to prepare NIR-absorbing plasmonic gold nanoparticles tethered by amphiphilic polypeptide copolymer for synergistic photothermal-chemotherapy

We developed one-pot photoreduction strategy to fabricate the NIR-absorbing plasmonic PLC-b-PEO@Au NPs. It possessed strong NIR absorption at 700-1100 nm, an ultrahigh photothermal conversion efficiency of 62.1%, and good photostability.