Coumarin Modified Rhodamine Derivative： Fluorescent Chemosensor Selectively Recognizing Al^3＋ and Ca^2＋

A fluorescent probe with a coumarin moiety bound to rhodamine 6G hydrazide（l） was synthesized. Its sensing behavior toward various metal ions was investigated with fluorescence methods. Compound I displays different fluorescence emission responses to Al^3＋ and Ca^2＋ at the same excitation wavelength in the visible light region, while no changes occur after the addition of other metal ions. The binding ratios of the complexs of 1-Al^3＋ and 1-Ca^2＋ are both 2：1 according to the Job plot and high resolution mass spectrometer（HRMS） experiments. Moreover, emission spectrum of 1-Ca^2＋ complex and absorption spectrum of the rbodamine dyes overlap largely. When Al^3＋ was added to the 1-Ca2＋ system, calcium in complex 1-Ca2＋ can be displaced by Al^3＋, resulting in the output of another ratiometric sensing signal, which demonstrates that the 1-Ca^2＋ complex can be served as a new and effective fluorescence resonance energy transfer（FRET） donor for rhodamine derivatives.     

Study on the Reaction of α-Ketohemithioacetal

Aromatic α-sulfinyl carboxylic acids can be rearranged to hemithioacetals or other derivatives of glyoxylic acid under the action of acid reagents was first reported by Pummerer¹. Later, Russell and coworkers applied this rearrangement to β-ketosulfoxides, synthesized α-ketohemithioacetal², which can be transformed to α-keto alcohol, α-keto aldehyde and α-hydroxy alcohol, α-hydroxy acid³. Furthermore, Hall and Poet reported that α-ketohemithio-acetal can be rearranged to the corresponding α-hydroxythioester in the presence of magnesium nitrate and sodium acetate or tertiary amine⁴. However, few reports of reaction of α-ketohemithioacetal can be seen in literature.     

新型Lewis固体酸Ce~(3+)-Ti~(4+)-SO_4~(2-)/MWCNTs制备及催化酯化反应合成生物柴油性能研究

采用高温浸渍法,通过Ce~(3+)、Ti~(4+)和浓硫酸磺化反应对多壁纳米碳管进行了改性处理,制备了Lewis酸型固体酸催化剂Ce~(3+)-Ti~(4+)-SO_4~(2-)/MWCNTs,并采用透射电镜、拉曼光谱、X射线光电子能谱、吡啶吸附红外光谱、X射线荧光光谱、X射线衍射光谱和NH_3程序升温脱附等多种测试技术对催化剂的物理化学特性和结构特征进行了表征。以Ce~(3+)-Ti~(4+)-SO_4~(2-)/MWCNTs为油酸与甲醇经酯化反应合成生物柴油的催化剂,对其催化性能进行了研究。结果表明,当醇油物质的量比为12∶1,催化剂与反应物质量比为1%,反应温度为65℃,反应5 h,油酸转化率为93.4%。催化剂Ce~(3+)-Ti~(4+)-SO_4~(2-)/MWCNTs在重复使用八次后,油酸的转化率仍为80.8%,由此表明其具有较高的催化活性和稳定性。高催化活性和稳定性是因为,纳米碳管的C 1s结合能较一般炭材料低,使得电子在其管状结构中的流动和逃逸非常容易,从而有助于负载于纳米碳管之上的活性组分之间发生强烈的相互作用,最终促使Ce~(3+)和Ti~(4+)分别与SO_4~(2-)形成稳定的配位键,增大催化剂的晶化程度,并使SO_4~(2-)与纳米碳管结合的更加牢固,增强了催化剂的稳定性,减少了催化剂中活性组分的流失。最后,由于SO_4~(2-)与Ce~(3+)的强相互作用,在不增加纳米碳管表面缺陷的情况下,改变了Ti~(4+)-SO_4~(2-)中表面原子的化学状态,使得S~(6+)离子和Ti~(4+)离子的吸电子能力增加,使催化剂以Lewis酸性活性位为主,避免了SO_4~(2-)/MWCNTs因为以Brnsted酸位为主,而在富含水的反应介质中,由于水合反应而降低其催化活性的现象发生。     

Ce3+/Ce4+电对在混酸(硫酸和甲磺酸)中的电化学行为

采用循环伏安、线性扫描、交流阻抗等技术研究了Ce³⁺/Ce⁴⁺电对在混酸(硫酸与甲磺酸)中的电化学行为,并对该体系在间接有机电合成中的应用进行了探索.结果表明：当硫酸和甲磺酸(MSA)浓度分别为0.8和1.0 mol·L^-1时,Ce³⁺/Ce⁴⁺电对具有最佳的电化学活性;在上述配比的混酸介质中,铈盐的溶解度得到了大幅提高,同时电解氧化铈(III)离子的电流效率较高（92.1%）,与纯硫酸体系中的电流效率接近（92.8%）,明显高于纯甲磺酸体系（78.5%）;该混酸介质中Ce⁴⁺在氧化茴香醚生成茴香醛这一过程中也表现出很好的氧化能力.     

酸量法测定四氢硼酸和八氢三硼酸季铵盐和碱金属盐

鉴定有机硼化合物,往往要测定元素硼的含量。用氧瓶燃烧分解法测定有机硼最为简便迅速,但由于有碳化硼的形成,常常导致元素分析值的偏低;用此法只能分解很少量样品,且不能完全燃烧^[1]。同时有机硼化合物中Fe、Co、Ni、Zn、Cu、Cr、Mn等金属元素的存在,常常对容量法或比色法测定硼有干扰。     

离子水化过程的核磁共振研究——二-(2-乙基己基)膦酸-长链醇-煤油-水体系

本文利用无水皂化萃取剂加水生成微乳状液研究离子水化的新方法,研究了酸性膦酸酯D₂EHPA(碱金属盐)-ROH-煤油-水体系中,通过对水质子化学位移变化的规律来研究碱金属的水合作用,所得结果与环烷酸体系相似。当[M⁺]/[H₂O]从100/1向1/100变化时,可以看到配位水的化学位移比缔合水(即正常液体水)向低场移动近2ppm,这比通常在浓盐水溶液中观察到的差值提高了一个数量级。当[M⁺]/[H₂O]大于100/1时,配位水的化学位移随阳离子不同而趋于不同的极限值,其顺序为NH₄⁺(6.76)>Li⁺(6.60)>Na⁺(5.96)>K⁺(5.40)。 从不同体系NMR图峰形和半高宽度Δv_1/2的变化,可以观察到阴离子的结构和组成对离子的水化作用有较大的影响。有关阴离子水合情况的研究工作正在进行中。     

Extraction of gallium(III) and aluminium(III) with O,O-dialkyldithiophosphoric acids

The extraction of Ga³⁺ and Al³⁺ with the liquid cation-exchangers di-n-butyldithiophosphoric acid (DBTPA) and di-(2-ethylhexyl)dithiophosphoric acid (DETPA) in kerosene, in the presence and absence of alcohols and tri-n-butyl phosphate (TBP) has been studied. Both Ga³⁺ and Al³⁺ can be extracted in the form of a neutral complex, MA₃, but the distribution coefficient of Ga³⁺ is the higher by about two orders of magnitude, which can be the basis of the solvent extraction separation of gallium and aluminium. The differences can be explained by the interaction between the sulphur donor atoms of the extractants and the d¹⁰ electronic shell of Ga³⁺ as well as by the lower steric hindrance of ligands co-ordinated to Ga³⁺.     

新型碳基固体酸SO_4~(2-)/Nd_2O_3/C制备及催化油酸与甲醇酯化反应合成生物柴油研究

在流化床管式炉中,通过对废山茶油壳进行高温炭化处理制备了一种碳基材料。以该碳基材料为载体,并对其进行稀土金属离子钕和硫酸磺化改性,合成了一种新型碳基固体酸催化剂SO_4~(2-)/Nd_2O_3/C。对制备而成的催化剂进行了多种物理化学表征分析,并以其为经甲醇和油酸酯化反应来合成生物柴油的催化剂,对其催化活性和稳定性进行了研究。结果表明,当甲醇和油酸物质的量比为2∶1,催化剂与反应物质量比为2%,反应时间为120 min,反应温度为90℃,油酸的转化率为96.70%。催化剂经循环使用三次后,油酸的转化率仍高达86.74%。高催化活性可归因如下:由于Nd、O、S元素的电负性分别为1.14、3.44和2.58,因而Nd易向O和S元素的2p空轨道提供孤对电子,使Nd~(3+)与SO_4~(2-)之间形成稳定的配位键。并且,由于S=O键具有强吸电子作用,而导致了与SO_4~(2-)配位的Nd~(3+)所产生的静电场增大,当有水(强配体)存在时,可使SO_4~(2-)/Nd_2O_3/C催化剂呈现出强Brnsted酸性。     

添加Li+对MgO催化性能的影响

本文以IR、TPD、丁烯异构化及直接脱氢反应为手段,对不同Li⁺添加量的MgO催化剂进行了研究。结果表明,表面低配位氧集团是催化剂的主要活性物种,起碱中心作用;表面金属离子起L酸中心作用。酸、碱中心的数目、强度随Li⁺添加量不同而呈规律性变化。这种变化影响了酸、碱中心的协同作用,从而影响其催化活性。     

Synthesis, crystal structure and characterization of ternary complexes of lanthanide(III) 3,5-di-tert-butyl-γ-resorcylate with substituted pyridine-N-oxide

Twenty one ternary complexes of lanthanide with 3,5-di-tert-butyl-γ-resorcylic acid (L) and seven different substituted pyridine-N-oxides (L^1–7), with compositions of REL₃L^1–7₂·nH₂O (RE=Nd, Gd, Er; L¹=4-picoline-N-oxide; L²=4-phenyl-pyridine-N-oxide; L³=pyridine-N-oxide; L⁴=3-picoline-N-oxide; L⁵=quinoline-N-oxide; L⁶=iso-quinoline-N-oxide; L⁷=4-methoxyl-pyridine-N-oxide; n=0, 1, 2, 5), were synthesized and characterized by means of elemental analysis, electrical conductivity, thermal analysis and IR spectra. The novel crystal structure of ErL₃L³₂·(EtOH) has been determined by a single-crystal X-ray diffraction method. It shows that each erbium ion is linked to three 3,5-di-tert-butyl-γ-resorcylic acid ions through two different types of dentation modes in which only the carboxylate oxygen atoms participate. The coordination geometries of erbium ion can be described as a distorted octa-coordinated bicapped trigonal prism.     

355 nm光照下大气液相中HNO2与C6H5Cl的反应机理

利用瞬态吸收光谱技术进行了有氧、无氧条件下氯苯与亚硝酸水溶液的交叉反应机理研究，初步考察了这些瞬态物种的生长与衰减等行为, 并对其光解产物进行了GC/MS分析.研究表明，HNO₂在355 nm紫外光的照射下可产生•OH自由基, •OH和氯苯反应生成C₆H₅Cl•••OH，反应速率常数为（6.6～7.0）×10⁹ L•mol^-1•s^-1; 在有氧条件下C₆H₅Cl•••OH可氧化为C₆H₅Cl•••OHO2, 反应速率常数为(1.6 ± 0.2)×109 L•mol^-1•s^-1,然后进一步分解; C₆H₅Cl•••OH衰减或与亚硝酸等作用可形成多种含硝基的化合物或醌类物质.     

A Novel Coumarin-based Fluorescence Chemosensor for Fe^3＋

A novel coumarin derivative[7-diethylamino-2-oxo-2H-chromene-3-carboxylic acid（6-amino-pyridin2-yl）-amide,CFe1] has been synthesized and its potential application as a chemosensor for the detection of metal ions has been further investigated.The responses of CFe1 to Fe^3＋ were studied by fluorescence emission spectrometry in the presence of other metal ions such as Al^3＋,Ba^2＋,Ca^2＋,Co^3＋,Cr^3＋,Cu^2＋,Fe^2＋,Hg^2＋,Mg^2＋,Mn^2＋,Na^＋,Ni^＋,Pb^2＋,Zn^2＋,K^＋,and Ag^＋.CFe1 showed a good selectivity for Fe^3＋ with fast response,a wide pH span of 3.3-9.18,and a large Stocks shift.CFe1 in the presence of Fe^3＋ and ethylene diamine tetraacetic acid（EDTA） makes the blue solution fade to colorless,which is due to the formation of CFe1-Fe^3＋ complex instead of any catalytic action of Fe^3＋.Furthermore,the imaging of Fe^3＋ in cultured single mice microglia cells was realized with the aid of CFe1,indicating that CFe1 has a great potential to be used as promising models for the future design of novel and robust chemosensor for metal ion detection in the field of biomedical and environmental analyses.     

Electron transfer from triplet thymine and thymidine to lipoic acid

Electron transfer from the triplet excited state of thymine or thymidine to the disulphide compound lipoic acid (RSSR) was studied using KrF laser flash photolysis (248 nm, 20 ns). The electron transfer reaction rate constants, measured at 310 nm, were determined to be 1.3×10¹⁰ M⁻¹ s⁻¹ and 6.9×10⁹ M⁻¹ s⁻¹ for thymine and thymidine respectively. The transient absorbance at 400 nm in the presence of the quencher is attributed to the anion radical of lipoic acid.     

12-钨磷酸及其盐的酸性与催化性能的研究

红外法研究结果表明12-钨磷酸Fe³⁺、Mg²⁺和Na⁺盐都具有L酸点和B酸点。用Benesi法测得10种12-钨磷酸盐的酸强度顺序为(Al³⁺、Fe³⁺、La³⁺、Cu²⁺、Cd²⁺>Zn²⁺>(Ca²⁺、Mg²⁺>(Na⁺、Li⁺,其酸量与抗衡阳离子的离子势和电负性大体成线性关系。还看出酸量与所含结晶水量有关。催化剂的酸量与其对异丙醇脱水反应和丁烯-1异构化反应的催化活性的关系表现出不同的特征,这可用“体相型”和“表面型”催化作用的不同特点来解释。     

Colorimetric detection of D-amino acids based on anti-aggregation of gold nanoparticles

A new method has been proposed to realize the visual detection of D-amino acids(DAAs) via the antiaggregation of 4-mercaptobenzoic acid modified gold nanoparticles(AuNPs) in the presence of D-amino acid oxidase(DAAO). The negatively charged AuNPs were prepared using sodium citrate as a reducer and stabilizer. The presence of 4-mercaptobenzoic acid(4-MBA) and Cu2+induces the aggregation of AuNPs,resulting in a color change from ruby red to royal purple. However, DAAO could oxidize DAAs to generate H2O2. In the presence of H2O2, the mercapto(–SH) group in 4-mercaptobenzoic acid can be oxidized to form a disulfide(–S–S–) bond. Based on these facts, the pre-incubation of DAAs and 4-mercaptobenzoic acid with DAAO would significantly reduce the concentration of free 4-mercaptobenzoic acid molecules,thus the aggregation of AuNPs was interrupted since due to the lack of inducer. As the concentration of DAAs increases, the color of the AuNPs solution would progress from royal purple to ruby red.Consequently, DAAs could be monitored by the colorimetric response of AuNPs using a UV–vis spectrophotometer or even naked eyes. This DAAO mediated visual detection method could determine Dalanine(D-Ala) as a representative DAA with concentrations ranging from 1.5×10~(-7)mol L~(-1) to 3.0×10~(-5)mol L~(-1), and the detection limit was as low as 7.5×10~(-8)mol L~(-1). The proposed method is convenient, low-cost and free of complex equipment, making it feasible to analyze the concentration of D-Ala in real samples of b-amyloid peptide(Aβ1–42).     

Fast and highly selective determination of cyanide with 2,2-dihydroxy-1,3-indanedione

A very simple, accurate, fast, selective and sensitive assay of cyanide based on its reaction with 2,2-dihydroxy-l,3-indanedione at basic pH is proposed. As little as 0.01 μg ml⁻¹ of cyanide can be determined. The molar absorptivity may reach 5.1–8.0×10⁴ l mol⁻¹ cm⁻¹ depending on the reaction conditions. Thus, 1 ml of sample solution is mixed with 500 μl of 5 mg ml⁻¹ solution of 2,2-dihydroxy-1,3-indanedione monohydrate in 2% sodium carbonate. The absorbance of the purple color is measured at 510 nm in 1-cm glass cuvettes, 10–15 min after mixing the reagents. The procedure could also be used to identify free CN⁻ in natural waters and hydrocyanic acid in the environment.     

PULSE RADIOLYSIS STUDIES IN MODEL LIPID SYSTEMS: FORMATION AND BEHAVIOR OF PEROXY RADICALS IN FATTY ACIDS

Abstract— Radiolytic formation and peroxidation of fatty acid radicals have been investigated by pulse radiolysis techniques in oleate, linoleate, linolenate and arachidonate systems. A strong absorption band at 280 nm associated with conjugated radicals, R_conj, formed in polyunsaturated fatty acid moieties has been used as a probe for kinetic processes occurring at doubly allylic sites in the hydrocarbon chain. Formation of R_conj by O^- has been found to be more efficient than the less selective OH radical. Peroxidation of R_conj is shown to be somewhat slower, ( k _R+ O₂˜ 3 × 10⁸ M ^-1 s^-1), than O₂ reactions with radicals in oleate ( k _R+ O₂= 1 × 10⁹ M ^-1 s^-1). Peroxy radicals generated in these reactions disappear slowly by essentially second order processes (2 k RO₁˜ 10⁷ M ^-1 s^-1). The superoxide radical, O^-₂, shows little if any reactivity towards 0.01 M linolenate or arachidonate over periods of 20 s.     

Cr3+的水解聚合作用(Ⅹ)——水解模型的作图分析和计算机筛选

用平衡pH法研究了在60℃和恒定离子强度时,在顺丁烯二酸存在条件下Cr³⁺的水解聚合状态。用作图积分法对体系的组成进行初步估算和pq^r分析。     

Design of a composite amperometric enzyme electrode for the control of the benzoic acid content in food

A graphite–Teflon–tyrosinase composite biosensor for the determination of benzoic acid in foodstuffs is reported. The biosensor functioning is based on the inhibition effect of benzoic acid on the biocatalytic activity of the enzyme in a reversed micelle working medium formed with ethyl acetate as the continuous phase, a 0.05 mol l⁻¹ phosphate buffer solution of pH 7.4 (5%) as the aqueous dispersed phase, and 0.10 mol l⁻¹ dioctyl sulfosuccinate (AOT) as the emulsifying agent. A potential value of −0.10 V, and a constant enzyme-substrate (phenol) concentration of 2.0×10⁻⁴ mol l⁻¹ were selected to carry out the amperometric inhibition measurements. The tyrosinase inhibition process by benzoic acid is reversible and of the competitive type, with an apparent inhibition constant of 0.016 mmol l⁻¹. The composite bioelectrodes allow the regeneration of the electrode surface by polishing and exhibit long-term operation and stability. A limit of detection of 9.0×10⁻⁷ mol l⁻¹ benzoic acid was obtained. An interference study from other substances which can be found in foodstuffs together with benzoic acid was performed. Taking advantage of the capabilities of reversed micelles as universal solubilization media, the composite tyrosinase electrode was used for the determination of benzoic acid in two different kind of samples: mayonnaise sauce, which is a highly hydrophobic matrix, and Cola soft drinks, a hydrophilic matrix for which practically no sample treatment is necessary.     

Flexible regulation of C3=/C2= ratio in methanol-to-hydrocarbons by delicate control of acidity of ZSM-5 catalyst

A very wide range of the C₃⁼/C₂⁼ ratio from 0.72 to 7.56 with high C₂⁼+C₃⁼ selectivity of around 66% in the methanol-to-hydrocarbons process can be realized over ZSM-5 catalyst in a fixed-bed reactor. We firstly conduct a single factor experiment of acidity, demonstrating that the acidity control of MTH catalyst is crucial to adjusting light olefins selectivity. Weak Brønsted acid sites favor to high C₃⁼ selectivity (59.0%) due to the suppression of the conversion reactions from the alkene-based to arene-based cycle, while Lewis acid sites conduce to high C₂⁼ selectivity (39.6%) due to the promotion of the conversion reactions for the aromatics formation and steric constraints of Lewis acid sites making the aromatics crack more efficiently to C₂⁼.